PROCEEDINGS OF THE COMBUSTION INSTITUTE
·
2026
·
IF 4.6
Junlei Wang,Jinyu Li,Yunfei Xu,Haojie Guo,Shilong Li,Kun Wang
Flame-assisted spray pyrolysis (FASP) is emerging as a promising approach for synthesizing Ni-rich cathodes of lithium-ion batteries (LIBs). In conventional wet chemistry approaches, lithium nitrate (LiNO 3 ) is frequently utilized as an effective flux to achieve enhanced battery performance; yet LiNO 3 is usually decomposed completely during current FASP that operates under high flame temperatures. Thermogravimetric analysis (TGA) for LiNO 3 and transition metal nitrates (Ni, Co, Mn) reveals that they are actually starting (and finishing) decomposing in much lower temperatures than previous studies assumed. And more importantly, there exists a notable gap of decomposition temperature (up to 356 °C) between LiNO 3 and the transition metal nitrates. Based on these findings, the present study proposed a low-temperature strategy to achieve only partial decomposition of LiNO 3 during FASP and taking advantage of the fluxing function of LiNO 3 to realize improved electrochemical performance of Ni-rich cathodes for LIBs. Specifically, an experimentally and theoretically confirmed low-temperature ∼665 °C of the co-axil flame was designed, which was shown to completely decompose the three transition metal nitrates while only partially decompose LiNO 3 . The undecomposed LiNO 3 was characterized and shown to act as a flux during the subsequent calcination stage, promoting the formation of NCM811 with larger primary particles, improved structural ordering, and reduced Li + /Ni 2+ cation mixing. Consequently, the synthesized Ni-rich cathode material achieved superior cycling stability (86.4% capacity retention after 100 cycles at 0.33 C) and rate performance (136.8 mAh/g at 5 C), notably outperforming the samples by the controlling high-temperature (∼1180 °C) strategy. The findings of the present work offered a new conception for the effective synthesis of high-performance Ni-rich cathodes through flame-assisted spray pyrolysis. Novelty and significance statement The present study introduces a novel low-temperature FASP strategy that selectively retains undecomposed LiNO 3 to utilize its intrinsic fluxing properties. Thermogravimetric analysis identifies a > 350 °C decomposition gap between LiNO 3 and transition-metal nitrates, enabling controlled partial decomposition of LiNO 3 , in contrast to current high-temperature FASP that melts and decomposes all salts indiscriminately. The undecomposed LiNO 3 during synthesis enables the growth of single-crystal-like NCM811 with enhanced structural ordering and reduced cation mixing, leading to superior electrochemical performance, all within a rapid, one-step flame synthesis process. These findings reveal how tailored flame conditions can direct intermediate material evolution, offering the combustion community a new strategy for designing complex functional nanomaterials and advancing the role of flame synthesis in energy applications.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED MATERIALS
·
2026
·
IF 29.1
Chao Li,Wenshuo Zhang,Guangrui Zhang,Xiaomeng Shi,Zhichao Zeng,Lele Gao,Yaping Du
The development of solid-state electrolytes (SSEs) integrating high ionic conductivity and a wide electrochemical window constitutes a critical challenge for all-solid-state lithium batteries (ASSLBs). Herein, we propose a multication mixing strategy of lanthanide elements, which introduces configurational entropy increase effect and electronic structure regulation into the Li 3 YCl 6 , achieving simultaneous enhancement of ion transport and oxidation resistance. Combined theoretical and experimental analyses verify that the entropy increase–driven local structural distortions effectively reduce the energy barrier for Li + migration and optimize ion-transport pathways. Concurrently, the unique electronic structure regulation of rare earth elements stabilizes the chemical environment of Cl − , significantly improving the intrinsic oxidation resistance. The full battery employing this optimized electrolyte demonstrates remarkable stability at 4.5 V, maintaining a capacity retention ratio of 74.3% after 800 cycles at 1 C rate. This research provides innovative insights into designing advanced SSEs through entropy increase effect and electronic structure design.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FOOD CHEMISTRY
·
2026
·
IF 10.4
Shengxiong Chen,Fan Zhang,Randolph R.J. Arroo,Jesus Simal-Gandara,Hui Cao,Jianbo Xiao
Lipid oxidation governs myricetin degradation in heated palmitic acid. • o-Quinone formation triggers B-ring cleavage and oxidative dimerization. • Carbonyl addition and lipid-derived ester conjugates were detected. • Vitamin C suppresses radical-driven pathways and improves myricetin retention. Dietary polyphenols are susceptible to degradation during high-temperature cooking, yet their transformation behavior in lipid-rich frying systems remains poorly understood. The thermal stability and degradation of myricetin in a simplified palmitic acid model under frying-relevant conditions was investigated. Myricetin degraded rapidly at 180 °C but remained relatively stable at 120 °C. UPLC–QTOF–MS/MS, supported by density functional theory calculations, suggested that myricetin transformation is temperature-dependent but primarily governed by lipid oxidation–derived radical and carbonyl chemistry. Vitamin C markedly delayed myricetin degradation by suppressing radical initiation and limiting o -quinone–centered downstream reactions. These findings highlight lipid oxidation as a key determinant of polyphenol stability during frying and clarify the protective role of antioxidants in lipid-rich thermal processing systems. Download: Download high-res image (202KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Advanced Healthcare Materials
·
2026
·
IF 11
Lili Zhao,Hongbo Li,Yutong Yue,Dan Xu,Zhenbin Liu,Lishan Yao,Lu Tian,Yangyang Jia,Haizhen Mo,Liangbin Hu
Seborrheic dermatitis (SD) is a chronic relapsing inflammatory dermatosis closely associated with Malassezia furfur overgrowth. Given the growing interest in metal-based antimicrobials, copper compounds were investigated here as potential anti-Malassezia agents for SD treatment. CuSO 4 showed the strongest antifungal activity against M. furfur at 1 mM and rapidly reduced fungal viability. Mechanistic analyses revealed intracellular copper accumulation, elevated Fe 2+ levels, increased reactive oxygen species generation, and enhanced lipid peroxidation, collectively suggesting an oxidative damage pattern with ferroptosis-like features. Based on its potent anti-Malassezia activity, a CuSO 4 -loaded xanthan gum/hyaluronic acid hydrogel (HG-Cu) was further developed for integrated local treatment of seborrheic dermatitis. HG-Cu exhibited viscous-flow behavior, high structural stability, and favorable biocompatibility. In a guinea pig model of M. furfur -induced seborrheic dermatitis, HG-Cu effectively suppressed fungal proliferation in lesions through sustained copper release. Histopathological analysis showed that HG-Cu markedly ameliorated skin lesions, reduced inflammatory infiltration, and promoted matrix reconstruction and skin repair by upregulating type III collagen (COL III) at the early stage and enhancing type I collagen (COL I) deposition at the later stage. Taken together, HG-Cu offers a promising localized therapeutic approach for seborrheic dermatitis by integrating sustained antifungal activity, inflammation control, and skin barrier restoration.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ELECTROCHIMICA ACTA
·
2026
·
IF 5.8
Zijian Zhao,Huan Guo,Xiaocan Xie,Yuanyuan Jia,Ke Yang,Xiaoyu Zhao,Yanfei Wang
The role of Na-content on the structural stability and electrochemical performance of P2/O3-type cathode was established. • The structural stability of P2/O3-type Na x Ni 0.23 Mn 0.57 Fe 0.1 Cu 0.1 O 2 cathode is improved by Cu/Fe co-doping. • High Na-content improves the Na⁺ diffusion coefficient as well as rate performance of Na x Ni 0.23 Mn 0.57 Fe 0.1 Cu 0.1 O 2 cathode. P2/O3 biphasic layered oxide cathodes combine the structural stability and fast Na + transport of the P2 phase with the high Na + storage capacity, high operating voltage of the O3 phase. In order to deeply investigate the effect of P2/O3 biphasic composition on the electrochemical performance, Na x Ni 0.23 Mn 0.57 Cu 0.1 Fe 0.1 O 2 samples (NMCF- x ) with the tunable P2/O3 biphasic composition were prepared. The X-ray diffraction results show that the relative ratio of O3 phase increases from 48.53% to 84.46% with increasing Na content from x = 0.70 to x = 0.85. The O3 phase-rich NMCF-0.85 cathode exhibits high rate performance (130.1 and 94.6 mAh g –1 at 0.2C and 5C, respectively) and high capacity retention (69.8% after 500 cycles at 5C). The galvanostatic intermittent titration analysis confirms that the Na + diffusion coefficient reaches as high as 6.99 × 10 –11 cm 2 s –1 . These excellent performances are ascribed to the fact that Cu/Fe co-doping and high Na content suppress the unfavorable P2-O2 phase transition and Na + /vacancy ordering in the NMCF-0.85 when charged to high potential. Thus, this finding can provide profound implications for developing stable layered oxide cathode materials with adjustable P2/O3 biphase for high-energy Na + storage. Cu/Fe co-doping P2/O3 hybrid layered oxide cathodes for SIBs have been prepared through adjusting Na-content, revealing the influence of P2/O3 composition to cycling performance. Download: Download high-res image (248KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Zhiwen Wang,Jingyi Shao,Yuan Yuan,Hang Xiao,Da Xiong,Xiaoru Tang,Bin Wei,Haijian Huang,Jiang Yin,Xiangping Chen,Liqiu Mao,Yao Zhao,Jianbo He,Sen Xin,Lishan Yang
Aqueous zinc-ion batteries (AZIBs) hold promises for the next-generation grid-scale electrochemical energy storage. Vanadium pentoxide (V 2 O 5 )-based materials with high theoretical Zn-storage capacities are considered a viable choice of cathode, yet they typically suffer from sluggish Zn 2+ diffusion kinetics and inferior electronic conductivity, and require a long electrochemical reconstruction process to be partially converted into a Zn 2+ -intercalatable hydrate phase. Here we show that, introduction of 2 mol% erbium (III) cations (Er 3+ , relative to the total metal content) into α -V 2 O 5 significantly improves charge transfer kinetics while facilitates thorough structural reconstruction to generate an active Zn 0.25 V 2 O 5 ·H 2 O phase during the initial battery discharge process. The reconstructed phase features an expanded (001) interlayer spacing of 10.75 Å, which not only accelerates Zn 2+ diffusion, but also promotes uniform valance state evolution of vanadium and Zn 2+ (de)intercalation from cathode surface to bulk. Consequently, the Er-doped α -V 2 O 5 (ErVO) cathode demonstrates outstanding Zn storage properties, delivering a reversible capacity of 402 mAh g −1 at 1 A g −1 and 301 mAh g −1 at 10 A g −1 , and a high capacity retention of 82% after 3000 cycles. In this way, we establish rare earth metal doping as an effective strategy for structural engineering and performance optimization of AZIB cathode materials.
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2026
·
IF 10.4
Linshang Zhang,Jiangfeng Ni,Tianming Xi,Shangde Sun,Yanlan Bi
Minor green soybean oil compounds (HMP-TG, DG, MG, PA) were synthesized. • MG, DG and PA inhibited crystallization at low concentration. • MG, DG and PA promoted crystallization at high concentration. • HMP-TG promoted the crystallization of soybean oil. • Tea polyphenol palmitate was identified as an effective crystallization inhibitor. Turbidity in soybean oil poses a significant challenge to the edible oil processing industry. This study hypothesizes that endogenous minor components in green soybean may promote turbidity development in soybean oil. The results revealed a dual role for monoglycerides (MG), diglycerides (DG), phosphatidic acid (PA): at low concentrations (MG ≤ 0.6%, DG ≤ 1.5%, PA ≤ 0.01%), they inhibited crystallization, whereas at higher concentrations (MG ≥ 0.8%, DG ≥ 2.0%, PA ≥ 0.05%), they promoted it. In contrast, high-melting-point triglycerides (HMP-TG) consistently acted as a crystallization promoter. Range analysis indicated that the relative strength of their impact followed the descending order: HMP-TAG > DG > MG > PA. Furthermore, tea polyphenol palmitate was identified as an effective crystallization inhibitor. This work provides a fundamental understanding of the factors governing soybean oil turbidity and proposes practical strategies for its control, offering valuable insights for the edible oil processing industry. Download: Download high-res image (116KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Shiqiao Liu,Debao Fang,Junlin Yang,Yongliang Shen,Yuefeng Su,Caihong Feng,Ning Li,Chengzhi Wang,Zhiyong Xiong,Haibo Jin,Jingbo Li
Carbon aerogels are highly promising lightweight microwave absorbers, yet their intrinsic brittleness and disordered pore structures significantly limit both mechanical reliability and electromagnetic (EM) performance. Here, a flexible honeycomb-like anisotropic hybrid carbon aerogel (CFMT), modified with MoS 2 /FeS 2 nanoparticles and toughened by a polyurethane network, is developed to overcome these limitations. Benefiting from the aligned quasi-periodic pore architecture, CFMT exhibits a distinct anisotropic electromagnetic response. When incident waves propagate parallel to the honeycomb channels, strong dielectric relaxation is induced, and localized electromagnetic resonance (LEMR) is generated within the pore structure, enabling efficient capture and dissipation of centimeter-wavelength electromagnetic energy. Consequently, the CFMT aerogel delivers an ultrawide effective absorption bandwidth of 11.84 GHz, accompanied by a minimum reflection loss of −50 dB. In addition to excellent microwave absorption, the aerogel also demonstrates robust mechanical flexibility and superior infrared stealth capability. This work explicitly elucidates the mechanism by which quasi-periodic porous structures enhance microwave absorption performance, providing a highly effective design paradigm for next-generation, multifunctional, and flexible electromagnetic wave absorbers.
✓ 已验证
产品关联
DOI
高影响因子
FOOD CONTROL
·
2026
·
IF 7
Fujia Dong,Hui Li,Yuxia Hu,Rongguang Zhu,Zongxiu Bai,Ying Xu,Xingxing Wang,Weiguo Yi,Songlei Wang
The presence of veterinary drug residues seriously endangers human health. Rapid and accurate detection is a necessary measure to reduce the pollution caused by veterinary drug residues. An interpretable strategy combining two-dimensional correlated spectroscopy (2D-COS) with density functional theory (DFT) was proposed for the analysis of fluorescence hyperspectral imaging (FHSI) responses of quinolone residues and in situ detection. The experiment took danofloxacin (DFX) as an example, the fluorescence hyperspectral data of 200 samples were collected using a 280 nm excitation wavelength. Studies have shown that the main emission peak of the DFX experimental spectrum is located at 441 nm. To uncover the intrinsic features under the overlapping signals, the 2D-COS was utilized to effectively resolve the hidden potential characteristic peak at 415.50 nm. Furthermore, it was revealed that the first excited state (S1) of the DFX molecule originated from the electron transition from the HOMO to the LUMO using TD-DFT, and the theoretical vertical transition wavelength was 416.29 nm. The theoretical predicted values were in excellent agreement with the 2D-COS analytical values, which proved the physical authenticity of the spectral fingerprints. Multivariate data processing methods were utilized to construct linear, nonlinear and ensemble learning regression models. The results showed that the 2D-COS-SVR model preprocessed with the second-order derivative had the best performance (with R2 P being 0.9388, RMSEP being 0.0783, and RPD being 4.042). The SHAP method was introduced to conduct an interpretability analysis on the optimal model, which confirmed that 415.50 nm was the key feature with the highest contribution to the prediction model, which was consistent with the results of DFT calculations. An integrated framework of "theoretical calculation-spectral analysis-model interpretation" was established in this study, which provided a mechanism-driven and interpretable new paradigm for the detection of antibiotic residues in meat.
✓ 已验证
产品关联
DOI
高影响因子
Defence Technology
·
2026
·
IF 6.4
Kan Xie,Yiyang Wang,Zijie Zhao,Jingyu Lei,Sulan Yang,Bin Tian
The dense oxide layer on the surface of aluminum (Al) particles is recognized as a major limitation to their combustion efficiency in solid propellants. Metal fluorides have emerged as promising combustion modifiers capable of enhancing Al reactivity through a catalytic-activation synergy. However, the systematic influence of NiF 2 content on this process remains poorly understood. In this work, the effect of NiF 2 content on the combustion performance of Al/AP composite fuels and hydroxyl-terminated polybutadiene (HTPB)-based propellants was systematically investigated. A series of composites and propellants with varying NiF 2 loadings were prepared and evaluated using an oxygen bomb calorimeter, thermal analysis, high-speed photography, and product characterization. The optimal NiF 2 content was determined to be 6 wt%, at which the composite fuel achieved a maximum reaction heat of 9357.62 J/g, corresponding to a 12.3% increase relative to the unmodified sample. Thermal analysis revealed that an appropriate amount of NiF 2 leads to the merging of the low- and high-temperature decomposition peaks of AP and the concentration of the exothermic event, indicative of a synergistic catalytic effect; excessive addition, in contrast, was found to suppress heat release. In propellant combustion, the SP-2 sample containing 2 wt% NiF 2 exhibited the most pronounced pressure-dependent burning-rate increase, with a maximum increase of 26.9% over the pressure range of 1.5–2.5 MPa. Product analysis further demonstrated that the condensed combustion products (CCPs) of SP-2 contain a higher proportion of Al 2 O 3 , exhibit a significantly reduced and multimodal particle size distribution with abundant submicron particles, and feature detectable AlN, confirming that NiF 2 effectively inhibits molten Al agglomeration and promotes combustion completeness. Therefore, the optimal working window of NiF 2 in the Al/AP system is identified, and its synergistic oxide-layer erosion and catalytic decomposition mechanism is elucidated, providing a key basis for the development of high-performance Al-based propellants.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Science
·
2026
·
IF 14.1
Mengting Yin,Yu Zhang,Xinyu Qu,Jiayi Liu,Zhongyi Sun,Haibo Liu,Ziyan Chen,Jing Ru,Jingwen Han,Bingqiang Lu,Yan Lu,Yan Wang,Xinyu Zhao,Feng Chen
Infected diabetic wounds are sustained by a vicious cycle of hyperglycemia-driven bacterial infection, persistent oxidative stress, and excessive inflammation, which collectively disrupt the ordered progression of tissue repair. Here, we engineered a stage-adaptive Janus microneedle patch (MN-FeSAC-PPE) to enable a staged therapeutic process from early antibacterial intervention to subsequent redox–immune microenvironment remodeling and regenerative tissue repair. This stage-adaptive design integrates Fe single-atom nanozymes (Fe-SACs) into the microneedle base to rapidly kill bacteria using near-infrared light, which activates reactive oxygen species (ROS) production, enabling rapid antibacterial activity against wound pathogens. Meanwhile, propolis extract-loaded (PPE) tips deliver antioxidant bioactive compounds into the wound bed to mitigate oxidative stress, modulate the redox-immune microenvironment, and support the inflammatory-to-regenerative transition. In vitro, MN-FeSAC-PPE enhanced antioxidant defense, suppressed pro-inflammatory factors, and protected fibroblasts from oxidative stress-induced mitochondrial dysfunction. Transcriptomic analysis further supported reduced inflammatory signaling and enhanced metabolism-related programs. In S. aureus -infected diabetic wounds, NIR-activated MN-FeSAC-PPE accelerated wound closure, promoted angiogenesis and collagen remodeling, and alleviated inflammation. These findings establish a stageadaptive redox-immune and bioenergetic regulatory microneedle platform for infected diabetic wound repair.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Surfaces and Interfaces
·
2026
·
IF 6
Wenggang Cao,Shijie Ma,Linqi Shi,Chengbing Yu
Core–shell Cu-MOF@GTA@mTiO2-CS microspheres synthesized via mild interfacial growth. • Antibacterial interface integrates contact-killing, photocatalysis, and Cu²+ release. • 99.9% efficiency under light; >90% in darkness across pH 6.0–8.0. • Light-independent antibacterial action via multi-mechanism synergy. • Excellent environmental robustness for durable functional application. Developing universally applicable, highly robust antibacterial materials remains a pressing challenge in antimicrobial research. In this study, we propose a novel strategy to construct a copper-based metal-organic framework (Cu-MOF) composite with a core-shell structure via a multi-mechanism synergistic antibacterial action. This was achieved by confining the growth of Cu-MOF on glutaraldehyde-functionalized, modified nano-TiO 2 -chitosan (CS) hybrid microspheres (GTA@mTiO 2 CS) through a solution-based method. The resulting composite features a well-defined porous structure, with a specific surface area of 19.917 m²/g, an average pore size of 3.411 nm, and a pore volume of 0.321 cm³/g, along with excellent thermal stability. Under dark conditions and within a pH range of 6.0–8.0, the material demonstrated antibacterial rates exceeding 90% against both S. aureus and Escherichia coli . Remarkably, at pH 6.0 under light irradiation, the antibacterial rates reached 99.7% and 99.9% against S. aureus and E. coli , respectively, surpassing most reported Cu-MOF-based systems and demonstrating strong environmental adaptability. This work presents a universal strategy for designing multifunctional antibacterial materials with strong environmental robustness and provides new mechanistic insights into synergistic multi-modal antimicrobial action. Download: Download high-res image (278KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子