CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Yiyang Li,Ning Li,Herong Wang,Xiaojian Rao,Han Liu,Yue Jiang,Weiguan Zhang,Yue Xiao,Yong Tian,Lin Fan,Jindong Tian
Comprehension of real-world physical properties is a prerequisite for robotic embodied intelligence, crucially supported by advancing human-like tactile sensing. Though large-scale tactile sensing arrays are indispensable for improving resolution and accuracy, they are hindered by insurmountable scalability barriers—signal crosstalk and the overwhelming redundancy of data acquisition systems. In contrast, biological tactile perception systems can simultaneously and efficiently transmit and process stimuli from multiple receptors with distinct functions. To bridge this gap, we report a neuro-inspired tactile system integrating multiparametric sensing, neuromorphic encoding, and a cognitive framework to construct a complete sensation–perception–decision pathway. Specifically, we engineer a high-resilience aerogel/sponge composite structure featuring high sensitivity (7.54 kPa −1 ) and exceptional cyclic stability, along with self-decoupling thermal sensing (0.1 K resolution; 20.85 μV·K −1 sensitivity). This is paired with an ultrasensitive (21.86 kPa −1 ) toughened conductive thin film offering an ultrafast response (1.3 ms). By integrating these core sensors and spatial frequency encoding circuits into distinct spatial hierarchies to mimic the mechanism of the biological spinal tactile nerves, we realize signal-separable bus transmission and effectively emulate the typical firing dynamics of fast-adapting, slow-adapting, and thermal receptors. Finally, a large language model-driven iterative model is introduced, which synthesizes multimodal data to achieve nuanced comprehension of physical properties (compliance, roughness, and thermal insulation) and establish personalized classification criteria aligned with subjective user perception (94% accuracy). Real-world applications demonstrate that this holistic biomimetic design endows the robots with sensory acuity to extract rich multimodal information, laying a foundation for enhancing their understanding of physical properties.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Haiyang Chen,Jiale Wang,Ke Zhang,Mengyuan Du,Gaoxiang Ye,Mingjie Guo,Cong Gao,Weisu Weng,Bin Li,Junhong Chen
A novel spatial confined micro-domains method based on the polyacrylamide (PAM) gel carbonization for the synthesis of highly dispersed nano α-Al 2 O 3 was proposed. By optimizing the gel concentration and cross-linking degree, a carbon network featuring confined micro-domains was constructed to effectively inhibit the migration of alumina precursors during phase transformation. Under the influence of spatial confinement, well-dispersed α-Al 2 O 3 nanoparticles with high purity and an average size of approximately 98.3 nm were obtained at an Al 3+ concentration of 0.1 mol/L. FTIR, XPS analyses and first-principles calculations further revealed that the formation of Al-C bonds at the surface of α-Al 2 O 3 contributed to reducing surface energy and enhanced interfacial stability, which further restrained the growth and agglomeration of nano α-Al 2 O 3 . Notably, the alumina ceramics sintered from these nanoparticles exhibited a higher density and superior mechanical properties than commercial counterparts. This study offers a feasible confined-domain strategy for the controllable synthesis of high-performance nano α-Al 2 O 3 .
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Yongseok Jeong,Jeongwoo Han,Sooyoung Lee,Gyeongsoo Kim,Dabin Kim,Jonggeun Sung,Changsik Song
Covalent adaptable networks (CANs) have emerged as promising alternatives to conventional polymer matrices to address the limited service life of carbon fiber-reinforced polymers (CFRPs); however, their mechanical and thermal performance is typically inferior. In this study, we synthesized a CAN matrix by introducing divinyl sulfone (DVS) into an epoxy network, achieving an unusual combination of high performance and malleability. The rigid network of the epoxy resin and the strong polarity of DVS yielded a β -amino sulfone-based CAN-based CFRP (BAS-CP) with an exceptionally high glass transition temperature (170.9 °C) and a tensile strength (876.9 MPa). In addition, the dynamic bond exchange enables crack self-healing, potential fabrication of enduring prepregs, and reshaping of fully cured CFRPs. β -Amino sulfone-based CAN (BAS) can be readily degraded using a mild oxidizing agent such as H 2 O 2 , enabling efficient recovery of carbon fibers from BAS-CP. The combination of these properties, low-cost monomers, and the simplicity of BAS synthesis suggest a new pathway for the development of cost-efficient, sustainable, and high-performance CFRPs.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2026
·
IF 18.1
Liu Yanan,Yu He,Li Mengjiao,Yan Li,Lu Ruihu,Fu Xiuting,Zhang Zhenfei,Zhu Youqi,Wang Ziyun,Tian Shubo
Synergistic catalysis, where distinct active species collaboratively activate different substrates, provides a powerful strategy for achieving chemical transformations with enhanced efficiency. Although Al 2 O 3 and bulk aluminum species are widely employed as catalyst supports, they are seldom regarded as active centers, especially in hydrogenation. Here, we show that atomically dispersed Al species can catalyze acetylene conversion at elevated temperatures. Building on this insight, we have designed a synergistic catalyst featuring precisely controlled Al dual-atom sites paired with Ni nanoclusters, synthesized via a solid-transformation-coupled gas-adsorption strategy to overcome the typical activity-selectivity trade-off. Under mild, cost-effective conditions, this catalyst achieves nearly full acetylene conversion with ~90% ethylene selectivity and excellent long-term stability. In situ spectroscopy and theoretical calculations reveal a cooperative mechanism: Ni nanoclusters efficiently dissociate H 2 into active hydrogen species (H*), while adjacent Al dual-atom sites shuttle the H* species to π-adsorbed acetylene, lowering the energy barrier for ethylene formation compared to over-hydrogenation and coke formation.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF ENVIRONMENTAL MANAGEMENT
·
2026
·
IF 9.2
Taijia Li,Guichun He,Mengfei Liu,Zhiwen Cao,Jie Min
The management of mine tailings and remediation of lead (Pb) pollution represent significant global challenges. This study presents a sustainable approach by converting lithium porcelain clay tailings (LPCT) into highly crystalline Na-faujasite zeolite for efficient Pb 2+ removal. The synthesis conditions were optimized, and the framework evolution mechanism was elucidated: four-membered rings → six-membered rings → β-cages → faujasite supercages → crystalline faujasite. The synthesized zeolite exhibited a high Pb 2+ adsorption capacity of 584.12 mg/g and a removal efficiency of 99.7%. In actual mining area groundwater, it achieved over 99% Pb 2+ removal with a high distribution coefficient (K d ) of 3.3 × 10 5 mL/g, demonstrating excellent selectivity. Mechanistic studies revealed that ion exchange serves as the primary adsorption mechanism (contributing approximately 78%), supplemented by electrostatic interactions and surface complexation. The zeolite structure remained stable and could be effectively regenerated using 1 M NaCl, maintaining a high adsorption capacity (>85%) after five consecutive cycles. Preliminary environmental benefit analysis indicates that this "waste-to-resource" approach not only reduces tailings disposal but also exhibits a significantly lower carbon footprint compared to conventional zeolites and activated carbon during synthesis, highlighting its circular economy and environmental synergies. The study further discusses the potential and challenges for the industrial-scale application of this technology. This work provides a dual-benefit strategy for tailings valorization and effective remediation of Pb 2+ -contaminated water.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Food Chemistry-X
·
2026
·
IF 9.2
Yaonan Liu,Yue Yang,Jing Zhang,Zhenxia Du,Yan Tang,Luhong Wen
Establishing a convenient and sensitive method for the enrichment and analysis of benzoylurea insecticides (BUs) in fruits and vegetables is essential for food safety monitoring. To this end, a novel fluorine-rich magnetic covalent organic framework (Fe 3 O 4 @COF-F) was designed and synthesized as an adsorbent in magnetic dispersion solid phase extraction (MDSPE), enabling efficient capture of BUs through synergistic interactions. This material exhibited rapid adsorption (4 min) and high adsorption capacities (150.1–163.1 mg g −1 ). By coupling Fe 3 O 4 @COF-F-based MDSPE with pulsed direct current electrospray ionization (PDESI), an ambient mass spectrometry (AMS), a rapid approach was established for the determination of BUs in cucumbers, cabbages, and apples. The proposed MDSPE-PDESI-MS approach demonstrated good linearity ( r > 0.995), low limits of detection (LODs) of 0.16–0.30 ng g −1 , and satisfactory spiked recoveries (80.56–93.98%). This method shows great potential for high-throughput and sensitive analysis of BUs in complex food matrices.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Kaixin Tian,Jinxiu Zhao,Weicheng Ye,Chunfan Cui,Jianlin Deng,Linrui Hou,Changzhou Yuan
Transition metal sulfides (TMS) have emerged as promising electrocatalysts for overall water splitting (OWS), owing to their cost-effectiveness, inherent abundant active sites and tunable electronic structures. However, several issues, e.g. , high overpotentials originating from the sluggish water dissociation, shielding of active sites and mass transfer resistance, as well as the modest long-duration electrocatalytic stability, are still enormous challenges. For this, the superwetting leafy Fe-doped nickel sulfide/cobalt sulfide nanoarrays on nickel foam (NF) (denoted as Fe-NiS/Co 2.67 S 4 /NF) are successfully designed and fabricated by the template-involved avenue. The interfacial electron re-arrangement of NiS/Co 2.67 S 4 induced by Fe doping optimizes the charge density distribution near the d-band center, promoting the adsorption-desorption of reaction intermediates. Additionally, the unique leafy architecture exhibits superhydrophilic sur−/interfaces, enabling efficient electrolyte penetration and accelerated bubble release during in-situ gas generation. Thereby, the advantages validated by comprehensive physical experiments and theoretical calculations endow Fe-NiS/Co 2.67 S 4 /NF with superior electrocatalytic performance in both hydrogen evolution reaction and oxygen evolution reaction, along with remarkable operational stability during high-current-density overall water electrolysis (1000 h at 500 mA cm −2 ). This work, besides the well-established reliable methodology for TMS nanoarrays, offers in-depth insights into catalytic optimization of electrocatalysts for high-efficiency OWS.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.7
Yijin Shu,Junjie Shao,Zhijun Chen,Yao dong,Dong Wang,Nina Zhao,Xiaoqiong Wu,Yongtai He,Xingfa Zi,Qijie Mo,Qingsheng Gao
Chevrel phase molybdenum sulfides (CP-Mo 6 S 8 ) have attracted considerable attention in catalysis and energy conversion owing to their unique electronic structures, open-framework channels, and remarkable electrochemical properties. Nevertheless, their practical implementation in the electrochemical hydrogen evolution reaction (HER) is significantly constrained by surface oxidation, which leads to diminished catalytic activity. To address this challenge, hierarchical Mo 6 S 8 @MoS 2 /carbon nanowires (C NWs) were designed in this study via a scalable electrospinning strategy combined with subsequent pyrolysis and in-situ vulcanization. The resulting nanostructure features Mo 6 S 8 nanoparticles encapsulated within rich MoS 2 nanosheets, which are supported by carbon nanowires. This architecture ensures the full functional expression of two types of molybdenum sulfides during catalysis while effectively preventing the surface oxidation of Mo 6 S 8 in air. Benefiting from this core-shell synergy, the optimized 250-Mo 6 S 8 @MoS 2 /C NWs exhibit outstanding HER performance, with a low overpotential of 181 mV at 10 mA cm −2 and a small Tafel slope of 37 mV dec −1 . Density functional theory (DFT) calculations reveal that the Mo 6 S 8 @MoS 2 heterostructure enables pronounced electronic interactions and an optimal hydrogen adsorption Gibbs free energy (ΔG H* ), explaining its excellent HER performance. This work establishes controlled oxidation and vulcanization as an effective route to efficient and robust electrocatalysts, opening new avenues for the development of cost-effective materials for energy applications. Graphic abstract
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2026
·
IF 18.1
Wang Xu,Kallenbach Cynthia M.,Almaraz Maya,Georgiou Katerina,Sun Lifei,Sang Changpeng,Jiang Ping,Liu Yue,Bai Edith,Wang Chao
Microbial necromass is increasingly recognized as a major source of stable soil organic matter (SOM), and its persistence is often attributed to interactions with clay-sized minerals. However, the mechanisms underlying this mineral-mediated stabilization remain poorly understood. Here, we conducted an in situ dual-labeled ( 13 C and 15 N) microbial necromass experiment across a clay gradient to quantify how clay content and necromass origin (bacterial vs. fungal) regulate necromass persistence. We find that higher clay content markedly enhances necromass retention by strengthening mineral protection, suppressing microbial activity and diversity, and limiting leaching losses. NanoSIMS imaging shows that new necromass preferentially associates with organic matter coatings on the rough mineral surfaces, highlighting organo-organic interfaces as important stabilization pathways. Necromass origin exerts little effect on retention despite marked differences in C:N ratios and bulk chemical composition, indicating that finer-scale molecular features, rather than broad compositional differences, govern necromass stabilization in soils.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2026
·
IF 4.5
Xiaomei Yang,Mengqing Wang,Ziqing Huang,Lipeng Zhou
The crystallization temperature was investigated for the hydrothermal synthesis of Sn-Beta. The crystallization curves of Sn-Beta at different temperature were performed and the crystal growth activation energy was obtained. The synthesized samples, especially the fully crystallized Sn-Beta, were characterized by XRD, SEM, ICP, UV-vis DRS, XPS, FT-IR spectroscopy of framework vibration and pyridine adsorption. The results indicate that the crystallization time shortened from 7 days to 1 day for Sn-Beta with n Si / n Sn of 100 when the crystallization temperature was increased from 140 °C to 180 °C. But no crystal was obtained as the crystallization temperature was higher than 180 °C. The catalytic performance of the fully crystallized Sn-Beta obtained at different crystallization temperature was slightly different in the conversion of ethyl levulinate (EL) to γ-valerolactone (GVL) and the conversion of glucose to methyl lactate due to the slight difference in silanol defects. Sn-Beta with n Si / n Sn of 80 can also be successfully synthesized after crystallization at 160 °C for 3 d, which shows much higher activity and selectivity than Sn-Beta with n Si / n Sn of 100 for the conversion of EL in high concentration (1.6 mol L −1 ) to GVL.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Yi Tian,Ping Yang,Xiao Zhang
Dual-mode detection of environmentally relevant metal ions remains a significant challenge using highly stable and sensitive red-emissive carbon dots. This work presents a one-pot synthesis of red-emitting carbon dots (CDs) using p-phenylenediamine and Na 2 SO 4 . Highly stable red photoluminescence (650 nm) was observed via the synergistic effect of Na + and SO 4 2- ions, in which the CDs revealed a photoluminescence quantum yield of 45.9% in ethanol. The CD sample prepared using optimized conditions (sample 2-CDs) served as a versatile probe for the dual-mode Cu 2+ and Fe 3+ detecting in water. Colorimetry detection was finished in solutions, by smartphone, and in filter paper. As for Cu 2+ , the detection limits reached 0.013 μM (fluorometry) and 1.65 nM (smartphone colorimetry). A portable test paper based on 2-CDs achieved a detection limit of 0.517 μM for Cu 2+ . In the case of Fe 3+ , the corresponding detection limits were 1.5 μM (fluorometry) and 76.9 nM (colorimetry). Fluorescent degradation kinetics by Cu and Fe ions were discussed in detail. The sulfate ions form a multifunctional protective layer that enhanced hydrophilicity, passivated surface defects, and resulted in the CDs with remarkable photothermal stability (retaining the initial intensity of 93% after 120 min of ultraviolet/boiling) and long-term storage stability (47.2% retention after 300 days). These results supplied a novel strategy for creating high performance red-emissive CDs, paving the way for their practical application in on-site environmental monitoring.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CATALYSIS
·
2026
·
IF 6
Mengjun Xiao,Yu Gui,Andraž Mavrič,Yi Wang,Matjaž Finšgar,Yao Nie,Wendong Zhang,Peng Chen,Chunhua Cui
The electrochemical chlorine evolution reaction (CER) is central to seawater electrolysis for converting Cl − to Cl 2 , yet its practical application is hindered by the high cost and Cl-coordination-induced instability of conventional Ir and Ru-based catalysts. Herein, we present an electrolyte Cl-mediated reconstruction of Co 3 O 4−x Cl x layer formed on Co 3 O 4 in acidic saline solution. This in situ reconstructed layer enables highly efficient and durable acidic CER. Through a combination of in situ and ex situ characterizations, we show that the spontaneously incorporated Cl − induces structural defects and modulates the oxidation behavior of Co sites, facilitating rapid oxidation of tetrahedral Co 2+ at low potentials to initiate CER while inhibiting over-oxidation of octahedral Co 3+ at high potentials. The resulting catalyst achieves 97% Cl 2 selectivity with a low overpotential of ∼0.15 V at 10 mA cm −2 while maintaining stable operation for more than 250 h. This work provides a simple and effective electrolyte-mediated reconstruction strategy to enhance both the selectivity and stability of non-precious-metal catalysts for acidic chlorine evolution.
✓ 已验证
产品关联
DOI
高影响因子