JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.7
Dandan Li,Jiepeng Zhao,Sai Huang,Zijian Li,Zhuo Cai,Zhaomin Tong,Liantuan Xiao,Suotang Jia,Xuyuan Chen,Yifei Ma,Mei Wang
Conductive MXene-based fibers hold great promise in the field of flexible wearable electromagnetic interference (EMI) shielding, but their poor spinnability, disordered layer stacking, and weak interfacial interactions severely limit their performance. To overcome these challenges, we develop a synergistic material-structure strategy to fabricate coaxial chitosan@MXene/graphene oxide (GO) composite fibers with chitosan (CS) as the outer shell. The introduction of GO significantly improves the dispersibility and interfacial compatibility of MXene, thereby resolving its inherent poor spinnability. The outer CS layer not only serves as a mechanical support layer but also forms an antioxidant protective shell, effectively inhibiting the degradation of MXene in aqueous and oxygenated environments. Furthermore, we propose a facile post-processing immersion-drying strategy, the immersion process induces slip and rearrangement of MXene and GO layers. Subsequent drying and shrinkage processes further compact the layers, thereby “locking” a tightly ordered conductive structure to yield CS@Mx-G-1 fibers. In this strategy, the fiber conductivity increases from 6.56 × 10 3 S/m to 1.55 × 10 4 S/m, while the electromagnetic interference shielding effectiveness enhances from 30 dB to 45 dB. The fibers maintain stable conductivity and flexibility after two immersion cycles. This approach provides a novel strategy for constructing high-performance flexible EMI shielding fibers.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Yang Liu,Pengsen Jiao,Tianlei Qian,Ye Sun,Tianle Zhu
Cooking fume exhaust components often suffer from performance degradation due to fouling adhesion, and superamphiphobic coatings exhibit excellent anti-fouling potential. However, the weak wear resistance and corrosion resistance of superamphiphobic coatings reduce their long-term effectiveness. In this study, a microskeleton-filler composite structural coating material was constructed, consisting of a cellulose@SiO 2 microskeleton (CE@SiO 2 ), chromium‑oxygen complex (Cr( OH , O ) n ) nanofillers, and a fluorinated layer. Cr( OH , O ) n -F endows the coating with excellent superamphiphobicity and corrosion resistance. The network topology of the CE@SiO 2 microskeleton endows the coating with self-similarity and disperses stress to protect the embedded nano-Cr( OH , O ) n particles, which makes the coating exhibit excellent anti-wear performance. This innovative design allows the CE@SiO 2 -Cr( OH , O ) n -F coating to retain its superamphiphobicity after a series of independent tests, including 250 m of sandpaper abrasion under a 1.6 kPa load, 16 min of water flow impact, and 72 h of immersion in separate strong acid (pH = 1) and strong alkali (pH = 13) solutions. These results demonstrate superior wear and corrosion resistance compared to other superamphiphobic materials. In addition, the coating demonstrates excellent resistance to oil mist deposition, self-cleaning performance, and antibacterial properties. For coatings stained by oil fouling, superamphiphobicity can be restored through simple cleaning. Combining these properties, the CE@SiO 2 -Cr( OH , O ) n -F coating material can be widely applied to the surfaces of non-food-contact cooking oil fume exhaust components in harsh environments, significantly reducing subsequent cleaning requirements.
✓ 已验证
产品关联
DOI
高影响因子
Food Chemistry-X
·
2026
·
IF 9.2
Zhiyong Pan,Beihong Mo,Lei Wang,Zizheng Li,Zhenmin Liu
Dissolved oxygen (DO) and aerobic psychrotrophs accelerate off-odor development in refrigerated HTST-pasteurized milk. This study evaluated pilot-scale in-line nitrogen sparging deoxygenation (NSD) prior to HTST to mitigate volatile deterioration. Control and deoxygenated milks were stored at 4 °C (0–21 d) and analyzed via HS-GC-IMS and 16S rRNA sequencing. NSD reduced packaged milk DO from 8.84 ± 0.32 to 0.97 ± 0.05 mg/L. Volatile differences were most pronounced at 7–10 d. Notably, the oxidation marker hexanal remained significantly lower in deoxygenated milk at day 21 (0.385 ± 0.029 vs. 0.804 ± 0.083). Furthermore, hypoxia constrained aerobic psychrotrophic spoilage taxa (Pseudomonas, Acinetobacter), decreasing predicted lipid catabolism and altering mid-storage methyl ketone accumulation. Upstream DO control via NSD represents a practical strategy to improve pasteurized milk flavor stability without increasing thermal load, potentially extending its sensory shelf life.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Applied Materials Today
·
2026
·
IF 7
Rimsha Abbas,Muhammad Umair,Suzhu Yu,Jingjing Luo,Peike Wang,Jun Wei
Highly conductive and flexible inks are crucial for the fabrication of next-generation wearable electrochemical sensors. This study presents a multi-ion sweat sensor composed of screen-printed Ag-MXene conductive ink, featuring a high electrical conductivity of 2 × 10 6 S m -1 . A novel electrode configuration was developed, comprising three working electrodes (WEs) together with a common reference (RE) and counter electrode (CE), all coated with the same ion-selective gel. The use of a uniform gel across all WEs ensures a consistent sensing environment, minimizes ion cross-talk, and improves repeatability. The Ag-MXene ink has excellent electrochemical activity, resulting in rapid, reproducible, and very selective potentiometric responses even at low ion concentrations. The Ag-MXene ink-based multi-ion sweat sensor achieved near-Nernstian sensitivities of 65.1 ± 0.7 mV/decade for Na + , 59.8 ± 0.6 mV/decade for K + , and 57.5 ± 0.8 mV/decade for Li + . These results are close to the theoretical Nernstian slope (∼59.2 mV/decade at 25 °C). On-body testing reveals that the sensor performs consistently under mechanical deformation and in real-world situations, demonstrating its viability for continuous health monitoring. After mechanical cycling, the Ag–MXene electrodes retained R/R 0 ≈1 with negligible hysteresis, demonstrating the structural and electrical integrity of the composite ink. Sensing cycling further verified stability: repeated stepwise measurements for Na + (5–160 mM), K + (1–32 mM), and Li + (1–100 mM) produced nearly identical potential peaks across successive cycles with no cumulative drift and minimal up/down hysteresis. The calibrations remained near-Nernstian, with response times of ∼2–3 s and sub-second recoveries, demonstrating excellent mechanical and electrochemical durability. The scalable screen-printing fabrication approach enables the cost-effective and reliable fabrication of flexible, wearable multi-ion sensors. This study demonstrates the potential of Ag-MXene-based electrodes for high-performance, multi-functional sweat sensing and offers a feasible path to enhance wearable electronic technologies.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materiomics
·
2026
·
IF 10.6
Gaochao Liu,Shuai Zhang,Yuzhen Wang,Zhiguo Xia
Near-infrared-II (NIR-II) photons hold great potential in assisting non-invasive imaging and optical signal sensing. However, the integration of broadband NIR-II light sources with photodetectors to improve the imaging sensitivity and spatial resolution is highly demanded. Herein, we have developed MgO-Li 2 SrGeO 4 :Cr 4+ composite ceramics, which demonstrate a broad NIR-II emission band centered at 1160 nm originating from spin-allowed 3 T 2 → 3 A 2 ( 3 F) transition of Cr 4+ . The incorporated nano-MgO particles serve as light-guiding channels while filling the pores and prevents the reduction of Cr 4+ , enhancing the external quantum efficiency and thermal conductivity of the composite ceramics to 53% and 17.8 W·m –1 ·K –1 , respectively. The dynamic wafer-scale luminescent ceramic wheel delivers a record broadband NIR-II emission output power of 1.9 W under 20 W·mm -2 red laser excitation, which facilitates imaging sensing of commercial PbS photodetectors by enhancing their photocurrents and signal-to-noise ratios. These results establish the feasibility of high-power broadband NIR-II light sources integrated with photodetectors, and further demonstrate the combination of intelligent algorithms toward high-resolution optical imaging.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2026
·
IF 9.2
Yuan Sheng,Zhijian Li,Yuan Zhan,Na Xu,Shuo Li,Liangbin Shao,Haoze Li,Jianguo Wang
The production of low-cost green hydrogen and deuterium demands alkaline water electrolyzers (AWE) with high energy efficiency and H/D separation factor (α H/D ) beyond the reach of conventional Ni-based hydrogen evolution reaction (HER) catalysts. Herein, efficient NiCo alloy/hydroxide nanocomposite catalysts are developed by one-step electrodeposition. Co-deposition of hydroxide moderates the alloy particles growth, forming hierarchical nanosheet-on-dendrite structures. The optimal catalyst outperforms commercial Raney Ni with a low HER overpotential of 32 mV at 10 mA cm −2 in 1 M KOH and a high α H/D of 5.79, operating stably for 1100 h at 800 mA cm −2 , 80 °C in 30% KOH. Electrochemical characterizations and in-situ ATR-SEIRAS attribute the high performance to increased surface area, weakened H ads adsorption, and selective enhancement of H 2 O (instead of D 2 O) dissociation induced by the metal-hydroxide synergy. This study reveals insights of kinetic isotope effects in hydrogen/deuterium evolution, and provides a scalable strategy for designing high-performance AWE cathodes.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
·
2026
·
IF 6.3
Weihua Ji,Ziqian Meng,Yang Miao,Yijie Wang,Chao Ma,Jeremy Heng Rao
The inherent contradiction between electrical and thermal transport has restricted the development of thermoelectric materials. However, high-entropy ceramics with complex structures exhibit unique properties and are expected to overcome this limitation. Herein, the thermoelectric properties of high-entropy fluorite oxides (Zr 0.194 Ce 0.194 Pr 0.194 Y 0.194 Ho 0.194 Mg x Zn 0.03-x )O 2-δ (0 ≤ x ≤ 0.03) are systematically tuned through the Mg-Zn co-doping strategy. The optimal composition (x=0.015) achieves a ZT of 0.46 at 773 K, which was approximately 119% higher than the undoped sample, and about 58% and 41% over Mg-only and Zn-only doped samples. This enhancement results from Zn increasing electrical conductivity as a charge donor while Mg reduces thermal conductivity through point defect scattering, enabling the synergistic optimization of electrical/thermal performance. First-principles calculations reveal Zn induces band convergence and gap contraction, increasing the density-of-states effective mass and promoting electron delocalization. This work validates high-entropy design combined with defect engineering as an effective strategy for developing high-performance thermoelectric materials.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2026
·
IF 8.8
Fei Gao,Jiawang Li,Hui Jia,Zhao Cui,Jie Wang
The precise separation of dyes and inorganic salts in industrial dyeing wastewater is crucial for achieving efficient dye removal while recovering salt resources. Conventional nanofiltration membranes suffer from limitations due to their limited pore size tunability range. In this study, a novel polyamide (PA)-based loose nanofiltration (LNF) membrane was fabricated via interfacial polymerization (IP), with cyclen as the aqueous monomer, isophthaloyl chloride (IPC) as the organic monomer, and ionic liquid (IL) as the aqueous cosolvent. Characterizations and MD simulations demonstrate that IL decouples bulk and interfacial diffusion, enabling membrane pore size tuning. The IL-95 v/v% membrane featured a loose PA selective layer characterized by thin thickness, low cross-linking degree, and large pore sizes. It exhibited a high permeance of 26.9 LMH·bar −1 and excellent AB172 dye rejection (99.8%), while maintaining low rejection (<10.0%) for various inorganic salts, outperforming most currently reported LNF membranes. Notably, the IL can be efficiently recovered via salt-induced phase separation (SIPS) from the post-IP waste aqueous solution, realizing the cyclic reuse of IL and reducing the environmental impact and cost of the process. This work offers new avenues for the application of high-performance LNF membranes to separate organics and salts in organic pollutant-laden wastewater.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.7
Chuang Wu,Manlin Jiang,Jiacheng Wu,Jiuxin Zhang
To overcome the difficulty of forming stable and continuous conductive pathways of MXene in conventional electrospinning systems, we develop a high-performance flexible pressure sensor featuring a synergistic embedded–coated dual conductive architecture. A TPU/PCL nanofiber membrane uniformly incorporating MXene is fabricated via one-step electrospinning, followed by PEDOT:PSS dip-coating to construct an external conductive layer. Subsequent Ecoflex 00–30 encapsulation ensures mechanical integrity and maintains continuous multilevel electron-transport networks. Structural characterizations confirm the homogeneous incorporation of MXene within the nanofibers and the continuous surface coverage of PEDOT:PSS. The optimized sensor exhibits a maximum sensitivity of 7.05 kPa⁻¹ in the low-pressure region, together with a broad sensing range up to 100 kPa, enabling reliable detection across both subtle and high-pressure regimes. It further demonstrates fast dynamic response (0.11 s/0.31 s for response/recovery), a low detection limit of 50 Pa, and excellent durability over 2000 loading cycles. Demonstration tests confirm its ability to detect subtle physiological motions at different body locations, such as wrist movements and throat motions during swallowing, as well as various joint motions. Overall, this synergistic dual conductive strategy offers a promising platform for wearable health monitoring, electronic skins, and human–machine interaction.
✓ 已验证
产品关联
DOI
高影响因子
BIOMATERIALS
·
2026
·
IF 13.6
Lei Tong,Yaling Cheng,Yuxiang Wang,Na Li,Jie Liang,Yong Sun,Yujiang Fan,Xingdong Zhang
Achieving both robust mechanical and osteogenic properties of bone adhesives remains challenging. Here, we developed a novel polyurethane-based bone adhesive (PCLU- g -nHA) by covalently incorporating aminated nanohydroxyapatite (nHA-NH 2 ) into a biodegradable poly (ε-caprolactone) urethane (PCLU) network. This design promoted uniform nHA dispersion and strong organic–inorganic integration through urea linkages, significantly enhancing compressive modulus (4.91 ± 0.10 MPa) and adhesive strength (3.41 ± 0.24 MPa in lap-shear). The adhesive cured rapidly under mild conditions with minimal heat release. PCLU- g -nHA showed improved biocompatibility and stimulated bone marrow mesenchymal stem cells (BMSCs) osteogenic differentiation in vitro . Transcriptomics revealed upregulation of extracellular matrix remodeling and collagen synthesis pathways. In vivo , PCLU- g -nHA enhanced bone regeneration and osseointegration in rabbit femoral condyle defect and tibial fracture models, outperforming a commercial PMMA bone cement. This study offers a scalable strategy for developing highly bioactive and tough bone adhesives with clinical translational potential.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2026
·
IF 4.6
Yi Zhang,Yingying Lu,Yi Zhang,Ningbo Zhang,Hailong Yan,Yinghui Wang,Hongyan Zhou,Yamin Zhang,Deyang Zhang,Gang Yang,Jinbing Cheng
Intercalation-type niobium-based oxides offer considerable promise as lithium-ion battery (LIB) anodes due to their safe operating voltages and structural robustness. However, their intrinsically poor electronic conductivity and sluggish ion transport impede practical deployment. Herein, we report a CoNb 2 O 6 @MXene/carbon nanofibers (CoNb 2 O 6 @MXene/CNFs) composite fabricated via electrospinning and controlled annealing. By embedding CoNb 2 O 6 nanoparticles and highly conductive Ti 3 C 2 T x MXene nanosheets within a flexible carbon nanofiber framework, this hierarchical architecture establishes efficient multi-dimensional electron/ion transport pathways. The excellent electrical conductivity of MXene enhances the charge transfer kinetics, while the carbon nanofiber matrix prevents particle aggregation and buffers volume expansion. Consequently, the optimized electrode achieves a high initial discharge capacity of 762.2 mAh g −1 at 0.1 A g −1 , maintaining 378.6 mAh g −1 after 200 cycles.
✓ 已验证
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2026
·Vol. 14
·期 2
·122081
·
IF 7.5
Yongming Zhong,Yangting Liao,Rongni Dou,Xiaolong Yu,Jin Tang,Hang Liu,Dan Liu,Yuming Fang,Yilun Luo,Jianteng Sun
The synthesis of novel film-like photocatalysts is an effective strategy for reducing Cr(VI). Herein, a Z-scheme ZnIn 2 S 4 –CdS heterojunction photocatalyst was fabricated on a self-assembled graphene-based substrate via hydrothermal and solvothermal methods. By controlling the ethanol:water ratio during solvothermal synthesis, differently sized CdS nanoparticles were grown on the ZnIn 2 S 4 nanosheets surface for regulating the photocatalytic activity of ZnIn 2 S 4 –CdS heterojunction. The three-dimensional layered structure of the graphene film provided abundant active sites for material loading and its excellent conductivity rapidly transferred photogenerated electrons. Compared to the ZnIn 2 S 4 –CdS heterojunction samples with other controlled structure, graphene-based film-like photocatalyst bring advantage in enrich photocatalysts for bursting out better activity. Under visible light irradiation, the synthesized RZC-40 sample exhibited a photocatalytic efficiency of 91.02% in photoreducing 20 mg L −1 Cr(VI) within 50 min, highlighting the feasibility and promising practical application prospects of synergistic film-like photocatalysts and laying a theoretical foundation for the further development of photocatalysts with improved activity.
✓ 已验证
产品关联
DOI
高影响因子