Polymers
·
2026
·Vol. 18
·期 15
·1798
·
IF 5.8
Wei Zhang,Haifeng Gao,Xuran Zhu,Yanzong Meng,Leyu Shen,Zhongyao Jiang,Hongjian Gao
To address the persistent challenge of membrane wetting during oil-gas separation in transformer condition monitoring, an omniphobic composite membrane was developed to facilitate the reliable online detection of dissolved gases. An F-CNTs/Teflon AF/PVDF composite membrane, featuring a loofah-like hierarchical structure and omniphobic properties, was fabricated via spraying-deposition strategy on the polyvinylidene fluoride (PVDF) substrate. The morphology, surface chemical composition, wettability and stability of the F-CNTs/Teflon AF/PVDF composite membrane were systematically characterized. Subsequently, the oil-gas separation performance of the composite membrane was evaluated using standard transformer oil containing dissolved gases as the feed solution. The results indicated that fluorinated carbon nanotubes (F-CNTs) were successfully modified onto the membrane surface, creating a re-entrant morphology composed of an intersecting nanotube network that mimics the hierarchical architecture of a loofah. The F-CNTs/Teflon AF/PVDF composite membrane exhibited exceptional omniphobicity, achieving contact angles of 168.2 ± 1.5° and 127.5 ± 1.0° towards DI water and mineral insulating oil, respectively. Additionally, the loofah-inspired composite membrane demonstrated robust thermal and ultrasonic stability. In oil-gas separation tests, the omniphobic membrane displayed a rapid response and high efficiency for dissolved gas extraction, achieving dynamic equilibrium within 64 min. Furthermore, the modification improved permeation efficiency by 25.6%. These results suggest that the developed omniphobic membrane is a promising alternative for oil-gas separation in the condition monitoring of oil-filled electrical equipment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Small Methods
·
2026
·
IF 8.7
Tuo Li,Jiehui Cao,Zipeng Deng,Yifei Chen,Yulu Ye,Zuan Guo,Yunbo Li
Gold nanoparticles (AuNPs) have shown considerable promise in catalysis and optoelectronics; however, their inherent tendency to aggregate and their limited processability hinder practical applications. Herein, we present a systematic ligand-engineering strategy for tailoring the hierarchical assembly of AuNPs into functional hybrid films, employing four structurally related 1,2,4-triazole multidentate molecules of increasing coordination complexity under a unified solution compounding–vacuum filtration–thermal curing route. The results demonstrate that the type, number, and interplay of coordinating functional groups on the triazole scaffold govern the assembly architecture and interparticle plasmonic coupling, enabling a ligand-programmed color-tunable effect from wine-red through purple and blue to gray-brown. Among the series, the C 2 H 6 N 6 S -modified film—bearing thiol (–SH), amine (–NH 2 ), and hydrazide (–NHNH 2 ) groups on a single molecular scaffold—delivers the highest catalytic activity for 2-nitrophenol reduction, achieving complete conversion within 14 min and maintaining over 95% conversion after nine consecutive cycles. Combined XPS, XRD, and SEM analyses attribute this performance to the multidentate coordination of C 2 H 6 N 6 S, which simultaneously enables dense particle packing, favorable electronic modulation of the Au surface, and robust structural stability. This work establishes a structure–property framework linking ligand multifunctionality to thin-film performance, and provides a rational design principle for engineering AuNP-based hybrid materials with tailored.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2026
·
IF 9.2
Yu-Zheng Wang,Shu-Qi Li,Zi-Kai Zhou,Chao-Jun Chen,Wei Yang,Si-Nuo Zhang,De-Zheng Yang
The development of mild and green ammonia synthesis is a significant and challenging research. In this study, a nanosecond pulse-driven coaxial double dielectric barrier discharge reactor was combined with M/γ-Al 2 O 3 (M = Co, Ni, Co–Ni) catalysts for efficient ammonia synthesis. Key parameters including pulse voltage, gas flow rate, and N 2 /H 2 molar ratio were systematically investigated. The Co–Ni/γ-Al 2 O 3 catalyst achieved the best energy efficiency of 1.11 g/kWh and a synthesis rate of 226.33 μmol g −1 h −1 under optimal conditions, which is 3.44 times higher than that of the plasma only system. Characterization revealed superior metal dispersion, smaller metal particle size, and larger specific surface area for Co–Ni/γ-Al 2 O 3 . Electrical diagnostics and optical emission spectroscopy (OES) showed that catalyst packing enhances discharge intensity and promotes key active species (N 2 ∗, N 2 + , and H α ). Synergistic effects between Co and Ni sites promote ammonia formation. This work provides new insights for designing high-efficiency plasma-catalytic ammonia synthesis systems.
✓ 已验证
产品关联
DOI
高影响因子
Gels
·
2026
·Vol. 12
·期 7
·634
·
IF 6.4
Tian Yu,Zhong-Xiang Tang,Meng Jin,Hui Ren,Bin Wu,Yu-Zhuo Fan,Ze-Hui Bai,Fang-Chang Tsai,Xue-Qing Zhan,Ning Ma
Information security and anti-counterfeiting are crucial across various industries. To address the limitations of traditional anti-counterfeiting materials, including low responsiveness, easy replication, and poor environmental stability, a fluorescein (Flu) loaded zeolitic imidazolate framework (ZIF-8) photothermal-responsive anti-counterfeiting hydrogel was designed. Flu was first confined within ZIF-8 via a one-pot method and then embedded into a polyacrylamide/lauryl methacrylate (PAM/LMA) network. This hydrogel emits intense green luminescence under 365 nm UV illumination. Its fluorescence can be quenched by Fe3+and recovered upon exposure to PO43−, which endows the material with rewritable data storage capacity. Sodium dodecyl sulfate (SDS) and sodium chloride (NaCl) in the hydrogel provide a temperature-dependent reversible transparency transition, allowing multi-level information encryption through the synergistic action of temperature, ions, and UV light. In addition, the hydrogel also features low toxicity, degradability, and an environmentally friendly solvent-free synthesis. This work demonstrates a multi-stimuli responsive strategy that overcomes the limitation of traditional single-responsive anti-counterfeiting materials, offering a promising approach for the design of rewritable and eco-friendly intelligent anti-counterfeiting systems and serving as a reference for the development of multifunctional responsive materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Small
·
2026
·
IF 11.8
Lixun Zhang,Xuewu Shen,Han Hu,Shengyin Tang,Sunny Jiang,Yuntao Guan
Microcystin contamination caused by harmful cyanobacterial blooms is a growing global challenge for water safety. Here we reported a self-assembled living microreactor that encapsulated microcystin-degrading bacteria within a biochar-reinforced double-network hydrogel, enabling integrated molecular sieving, adsorption, and enzymatic degradation. The system exhibited size- and charge-selective removal of microcystin over coexisting organic matters, while maintaining high degradation efficiency under harsh stress conditions, including pH (5−9), inorganic ions (10−200 mg/L), and natural organic matters (5−20 mg/L). The microreactor demonstrated excellent mechanical stability, negligible cell leakage, and high bioactivity, and achieved nearly complete removal of microcystin-LR during five repeated operation cycles and continuous biofiltration in environmental water, confirming its scalable application potential. Mechanistic investigations revealed a cascade process involving shell-confined molecular sieving, adsorption-mediated toxin enrichment on biochar, and localized biodegradation within the living core. This work establishes a generalizable design paradigm for programmable living materials, offering new opportunities for selective biodegradation and remediation in complex aqueous systems.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2026
·
IF 4.6
Abulimiti Yumaier,Keke Jia,Gulimeikereyi Tuniyazi,Nurgul Abla,Arzugul Muslim
Conducting polymer/iron-based composites enable synergistic As(III) removal via coupled oxidation-adsorption. • Fe 3+ /Fe 2+ cycling drives As(III) oxidation to As(V) with subsequent Fe-O-As inner-sphere immobilization. • β -FeOOH and MIL-101(Fe) modification layers enable higher conversion and more balanced total arsenic removal, respectively. • Morphology-dependent Fe site exposure governs the trade-off between oxidation rate and adsorption capacity. Arsenic pollution in water poses a significant environmental challenge due to its high toxicity. This study investigates the synergistic mechanism of electrocatalytic oxidation and adsorption for arsenic removal using two conducting polymer/iron-based composite electrode series with modification layer of β -FeOOH/M-CR-P o PD and MIL-101(Fe)/M-CR-P o PD. Both ternary composites were systematically characterized and evaluated for As(III) oxidation, removal efficiency, and speciation transformation. Electrochemical kinetics analysis reveals that As(III) oxidation on both electrodes follows a two-electron process under mixed electrochemical-diffusion control. The β -FeOOH/M-CR-P o PD@GF electrode exhibits superior electrocatalytic oxidation activity, achieving 81% As(III) conversion, making it suitable for rapid toxicity reduction. In contrast, MIL-101(Fe)/M-CR-P o PD@GF, leveraging its high specific surface area and abundant Fe active sites, achieves 54% conversion while demonstrating stronger As(V) capture capability and more balanced total arsenic removal. XPS and SEM-EDX analyses confirm the synergistic mechanism: Fe 3+ /Fe 2+ cycling drives As(III) oxidation to As(V), followed by stable immobilization via Fe-O-As inner-sphere complexation, with M-CR-P o PD enhancing electron transfer and As(III) pre-concentration. This work provides mechanistic insights and practical guidance for designing conducting polymer/iron-based electrodes for targeted arsenic wastewater treatment. Conducting polymer/iron-based composite electrodes enable synergistic As(III) removal via electrocatalytic oxidation and adsorptive immobilization. The Fe 3+ /Fe 2+ cycle drives As(III) oxidation to As( V ), followed by stable complexation with Fe-O/Fe-OH sites, with different series achieve higher conversion and total arsenic removal rates, respectively. Download: Download high-res image (167KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
POLYMERS FOR ADVANCED TECHNOLOGIES
·
2026
·Vol. 37
·期 7
·e70668
·
IF 3.8
Ben-Qing Huang,Ji-Zhen Hu,Ning Ding,Zhan-Jian Liu
Nanofiltration (NF), an emerging technology for water treatment, is recognized for its energy efficiency, environmental friendliness, and high performance. Improving the antibacterial characteristics of NF membranes is crucial for expanding their practical applications. Herein, a novel thin-film composite (TFC) NF membrane was fabricated through interfacial polymerization (IP), during which silver modified polymeric nanoparticles were strategically incorporated into the nascent polyamide (PA) network. The resultant NF membranes exhibited a marked increase in permeability, achieving a flux of 85.6 L m −2 h −1 while maintaining a Na 2 SO 4 rejection of 97.6%. Under various operational conditions, the membrane demonstrated promising NF performance and stability, indicating its good application prospects. Furthermore, the membrane exhibited significant inhibiting effects against Escherichia coli and Staphylococcus aureus . The present work establishes a novel pathway for fabricating high-performance NF membranes with inherent antibacterial functionality, thereby offering significant potential to broaden the practical application scope of NF-based separation technologies.
✓ 已验证
产品关联
DOI
高影响因子
COMPOSITES PART B-ENGINEERING
·
2026
·
IF 14
Bowen Zhang,Zhenzhen Sun,Guorui Qiang,Haonan Xiong,Zhuohua Sun
Epoxy-based carbon fiber-reinforced composites (EP-CFRCs) are highly attractive for engineering applications due to their outstanding strength, lightness, and high durability. However, the limited recyclability of highly cross-linked epoxy matrices and their reliance on petroleum-based resources pose major challenges for the sustainable development of EP-CFRCs. Herein, we report a high-performance bio-based dual-dynamic cross-linked epoxy vitrimer. Benefiting from rigid conjugated structures and microphase separation in the network, FBP 0.5 exhibits excellent tensile strength (90.6 MPa) and flexural strength (126.8 MPa). The synergistic effect of tertiary amine-assisted dynamic ester bonds and boronic ester bonds accelerates topological network rearrangement, enabling FBP to achieve efficient self-healing, reprocessing, and closed-loop recycling without external catalysts. The special intrinsic fluorescence of FBP allows accurate material identification during recycling. The recycled degradation products can be directly reused for the preparation of new FBP or upgraded into high-performance adhesives without further separation or purification. EP-CFRCs based on FBP 0.5 (FBP 0.5 /CF) show excellent interfacial adhesion and mechanical reinforcement, while enabling nondestructive recycling of carbon fibers. This strategy offers a promising pathway for the design of sustainable high-performance epoxy thermosets and provides a practical solution for the circular utilization of EP-CFRCs.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Marine Science and Engineering
·
2026
·Vol. 14
·期 14
·1311
·
IF 3.2
Daping Zhou,Shuye Xue,Ye Qiu,Xiangming Zeng,Haijun Wei,Shen Wu
The instability of marine low-sulfur fuel oil caused by asphaltene precipitation poses significant operational challenges in the shipping industry. This study systematically investigates the dispersing effects of biodiesel derived from three different feedstocks—palm oil, waste cooking oil (WCO), and microalgae oil—and their individual fatty acid methyl ester components on asphaltenes extracted from VLSFO. Biodiesel was selected as a dispersant due to its renewable nature, polar ester functional groups, and variable unsaturation levels, which enable favorable interactions with asphaltene molecules through hydrogen bonding and π-π stacking. Using UV–Visible spectrophotometry, the dispersion performance was quantitatively evaluated under various conditions including dispersant concentration, temperature, storage time, and molecular structural characteristics. The results demonstrate that microalgae oil biodiesel exhibits the most superior asphaltene dispersion capability among the three biodiesels, with a dispersion improvement index of 35% at 12 g/L, compared to 28% and 22% for waste cooking and palm oil biodiesels. Optimal performance is achieved at 80 °C, where the asphaltene concentration increases by 68% relative to the control, and remains stable within the first 10 days of storage but deteriorates significantly after 30 days due to oxidative degradation. Among individual FAME components, the dispersion effectiveness increases with alkyl chain length from C10 to C20, with the latter reaching a 30% improvement index. Functional group polarity plays a critical role, with carboxylic acid exhibiting a 45% improvement at 14 g/L, substantially outperforming alcohol at 32% and ester at 28%. The degree of unsaturation further enhances dispersion, as the improvement index rises progressively from 20% for saturated methyl stearate to 42% for tri-unsaturated methyl linolenate, representing a 2.1-fold increase. Dynamic light scattering (DLS) measurements confirm that biodiesel addition reduces asphaltene particle size from the micrometer range of 2 to 5 μm down to submicron levels of 200 to 500 nm, while microscopic observations reveal inhibited aggregation. These findings provide theoretical foundations for biodiesel application in marine fuel systems.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF PROTEOME RESEARCH
·
2026
·
IF 3.8
Chen Xiangling,Huang Nan,Xu Zhihan,Luo Juan,Dong Qiongye,Lyu Zhaojie
Clear cell renal
cell carcinoma (ccRCC) is the predominant
histological
subtype of kidney cancer, characterized by a paucity of therapeutic
targets and a dismal prognosis in advanced stages. Although family
with sequence similarity 49 member B (FAM49B) has been implicated
in tumor progression with context-dependent roles, its function in
ccRCC remains undefined. Herein, we elucidated the expression profile
and regulatory mechanisms of FAM49B by utilizing integrated bioinformatics,
molecular biology, and proteomic approaches. Analysis of TCGA and
CPTAC data sets revealed a significantly upregulated FAM49B protein
in ccRCC tissues that positively correlated with pathological grade,
while the mRNA level was unchanged. Mechanistically, FAM49B undergoes
proteasomal degradation, whereas the deubiquitinating enzyme USP9X
directly binds to and stabilizes FAM49B. Pharmacological inhibition
or knockdown of USP9X notably reduces FAM49B protein abundance without
altering its transcription. Quantitative proteomic and affinity mass
spectrometry identified ATP1B1 as a critical downstream effector of
FAM49B. Western blotting (WB) analysis verified that silencing FAM49B
downregulated ATP1B1 in ccRCC cells, while coimmunoprecipitation assays
established their direct physical interaction. Consistent with FAM49B
expression profiles, ATP1B1 protein levels were elevated in high-grade
ccRCC specimens. Collectively, these findings delineate a USP9X–FAM49B–ATP1B1
signaling axis that drives ccRCC progression, representing a promising
diagnostic biomarker and potential therapeutic target.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INORGANIC CHEMISTRY COMMUNICATIONS
·
2026
·
IF 5.9
Jiaheng Xu,Huajun Sun,Xinyue Yang,Huiling Guo
In recent years, an increasing amount of drug pollutants such as antibiotics have been entering the water environment, and conventional water treatment technologies struggle to decompose these persistent organic contaminants. In response to the above situation, this study utilized a partial pyrolysis method to synthesize a novel type of BaTiO 3 /FeOCl heterostructure catalyst, and established a Piezoelectric-Photo-Fenton catalytic system to achieve effective degradation of tetracycline hydrochloride (TCH). With concurrent exposure to visible light radiation and ultrasonic excitation, the BaTiO 3 /FeOCl system achieved complete degradation of TCH within 6 min, demonstrating significantly superior performance compared to individual components or single-process systems. Moreover, the system exhibited broad pH adaptability and excellent operational stability, and quantitative detection and radical trapping confirmed •OH and •O 2 − as the principal reactive oxygen species. Mechanism studies demonstrated that the intrinsic piezoelectric field of BaTiO 3 promotes charge carrier decoupling and boosts the turnover of the Fe 3+ /Fe 2+ redox couple, while FeOCl served as an active site for H 2 O 2 activation, thereby synergistically leading to the abundant formation of reactive oxygen species (•OH and •O 2 − ). This work presents an effective strategy for integrating piezoelectric, photocatalytic, and Fenton processes to enhance catalytic efficiency, presenting a highly prospective strategy for the purification of organically polluted wastewater.
✓ 已验证
产品关联
DOI
高影响因子
Polymers
·
2026
·Vol. 18
·期 14
·1778
·
IF 5.8
Hanyang Zhao,Qingjun Jin,Hongwei Zhao,Yunkai Yang,Xiang Cheng,Xiujuan Ren,Hongxing Shi
To elucidate the formation of crosslinked products and their influence on material degradation, thermoplastic polyurethane (TPU) films were subjected to accelerated UV aging for various durations. Post-aging, the samples underwent Soxhlet extraction with tetrahydrofuran (THF), yielding an insoluble fraction—operationally defined as the crosslinked product—and a soluble uncrosslinked fraction. The mechanical properties, molecular weight distribution, swelling behavior, thermal properties, and chemical structure were analyzed. As UV aging progressed, both tensile strength and elongation at break deteriorated markedly. Concurrently, GPC analysis revealed a continuous decrease in molecular weight and a broadening of the molecular weight distribution, confirming that chain scission was the dominant degradation pathway. An insoluble network-like residue, defined as the crosslinked product, first appeared after 12 h of aging, with its content increasing to 22.9% after 300 h. Swelling tests showed that the crosslinked product had a high gel fraction, and its swelling ratio decreased from 196.8% to 157.4%, indicating the formation of a stable and increasingly dense network. DSC and TG results revealed restricted segmental motion, altered thermal transition behavior, and enhanced char-forming ability. The glass transition temperature of the crosslinked product exceeded that of the pristine TPU film. FTIR analysis showed variations in the -NH2, C=O, C-O, and C-O-C bands, confirming structural evolution within both hard and soft segments. In summary, UV aging of TPU involves a complex interplay among chain scission, degradation of soft segments, rearrangement of hard segments, evolution of hydrogen bonds, and radical-induced crosslinking. Crucially, the crosslinked network formed during aging plays a pivotal role in determining the macroscopic structural, thermal, and mechanical properties of the polymer.
✓ 已验证
产品关联
DOI
PubMed
高影响因子