文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2161至2172个,产品总数347,389个

切换升序
POLYMER · 2026 · IF 5.1

Hierarchically porous CNF-CNT@PANI nanocomposite aerogels for flexible supercapacitors with high specific capacitance and electrochemical stability

Huixiang Wang,Xinchao Yang,Jing Wang,Ya Lu

Flexible supercapacitors have emerged as promising energy storage devices, owing to their high power density and long cycle life. However, the development of electrode materials with high specific capacitance, superior electrochemical and mechanical stability remains a critical challenge. In this work, we report a facile strategy for fabricating cellulose nanofiber (CNF)-carbon nanotube (CNT)@polyaniline (PANI) nanocomposite aerogels via TEMPO oxidation, freeze-drying, and in-situ polymerization. The CNFs serve as a dispersive scaffold to uniformly distribute CNTs, forming a three-dimensional (3D) interconnected network, while PANI coats the CNF-CNT hybrid to construct a core-shell structure, enhancing pseudocapacitive performance. The resulting CNF-CNT@PANI aerogel exhibits a hierarchical porous structure with a high specific surface area of 121.4 m 2 g -1 and low density of 12.8 mg cm -3 . The assembled flexible supercapacitors deliver a high areal specific capacitance of 722.4 mF cm -2 at 2 mA cm -2 , long-term capacitive cyclic stability (86% capacitance retention after 3000 cycles), and remarkable mechanical stability (95.2% capacitance retention after 200 bending cycles). Additionally, the device achieves a maximum areal energy density of 99.5 μWh cm -2 at a power density of 1005.4 μW cm -2 , outperforming many reported PANI-based supercapacitors. This work provides a feasible approach for designing high-performance flexible electrode materials for next-generation energy storage systems.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2026 · IF 6.6

Light-Tunable electromagnetic interference shielding using a Shape-Memory polylactic Acid/Bacterial Cellulose/Copper nanowire composite film

Hanhan Zhao,Dan Guo,Bochong Wang,Qijun Sun,Congpu Mu,Jianyong Xiang,Tianyu Xue,Kun Zhai,Anmin Nie,Fusheng Wen

With the escalating prevalence of electromagnetic radiation, there is an urgent demand for smart shielding materials capable of adapting to complex and dynamic environments. Herein, we report a flexible triple-layered composite film fabricated with bacterial cellulose as the substrate, copper nanowires (CuNWs) as the conductive shielding layer, and polylactic acid as the shape-memory polymer. The composite film exhibits excellent mechanical properties, featuring a tensile strength of 38.8 MPa and a fracture strain of 5.6%. By adjusting the CuNWs content, the electromagnetic interference (EMI) shielding effectiveness (SE) in the X-band can be precisely regulated, achieving a maximum SE of 45.1 dB. Furthermore, the integration of PLA endows the film with light-induced shape memory behavior via photothermal effect, enabling reversible and non-contact tuning of SE between 5 dB and 40 dB. To enhance long-term durability, graphene nanosheets were introduced as an anti-oxidation layer. Notably, the SE of the GNP-modified film only decreases by 1.8 dB over a 15-day period, in stark contrast to a 7.0 dB loss observed in the uncoated counterpart. These results demonstrate the successful development of a mechanically robust, oxidant-resistant, and intelligently tunable EMI shielding film, which offers a promising platform for adaptive electromagnetic management in advanced electronic systems.

CAS / MDL: 112-80-1 112-90-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
RSC Advances · 2026 ·Vol. 16 ·期 15 ·13032-13039 · IF 6.1

A large-scale and flexible SERS substrate based on sliver decorated nano-cone arrays and its applications for pesticide residue detection

Jie Chen,Mengjie Hu,Tianyuan Liu,Meizhen Huang,Lili Kong,Xinna Yu,Qifang Sun

This paper demonstrates a large-scale, flexible SERS substrate (Ag@R-SERS substrate) based on silver-decorated nano-cone arrays. The substrate was fabricated via a two-step process: pre-designed nano-cone arrays were replicated over a large area with high structural uniformity using roll-to-roll ultraviolet nanoimprint lithography (R2R UV-NIL); subsequently, silver nanoparticles (Ag NPs) were self-assembled onto the nano-cone arrays. The performances of the Ag@R-SERS substrate were evaluated using rhodamine 6G (R6G) as a probe molecule with a portable Raman spectrometer. The enhancement factor (EF) and limit of detection (LOD) of R6G detected on Ag@R-SERS substrate were determined to be 5.9 × 107 and 2.65 × 10−8 M. The relative standard deviations (RSDs) of R6G Raman intensities at 1513 cm−1 were 5.6% within a single substrate and 6.7% among different substrates. No obvious changes were observed in the line curve of R6G detected by the SERS substrate stored for 20 days. These results demonstrated satisfactory sensitivity, uniformity, reproducibility and stability. Numerical simulations were established to illustrate the electromagnetic enhancement effects of the Ag@R-SERS substrates, which were jointly attributed to the strong coupling effects of densely distributed AgNPs and Ag clusters at the tips of nano-cones. Furthermore, the potential application of the Ag@R-SERS substrate in pesticide detection was explored. Linear relationships between the SERS intensity at 1386 cm−1 and thiram concentration were established with R2 of 0.9986, 0.9940, 0.9974 and the LOD of thiram was determined to be 0.46, 0.49 and 0.55 ppm in ethanol, apple juice and tomato juice, respectively. These results confirm the feasibility of the two-step fabrication method for large-scale, flexible Ag@R-SERS substrates and their applicability for rapid and sensitive pesticide residue detection.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Energy Chemistry · 2026 · IF 15.6

Preferential Lewis-basic ion pathways for accelerated Zn2+ diffusion and uniform deposition at zinc metal anodes

Linxia Yu,Quan Zong,Xin Li,Guoying Wei,Qilong Zhang,Qiaoling Kang,Jingji Zhang,Gongxun Bai,Shuang Zhou,Anqiang Pan,Chengbin Jin

With advantages of high safety, low cost, and environmental friendliness, aqueous zinc metal batteries (ZMBs) are widely recognized as potential next-generation systems for grid-scale energy storage. However, their widespread application suffers from unstable Zn/electrolyte interfaces induced by uncontrolled Zn 2+ desolvation, migration, and deposition. Herein, we propose a molecularly engineered interfacial layer, created through a hydrolysis-condensation molecular assembly, that couples hydrophobic exclusion, preferential Zn 2+ transport pathways, and Lewis-basic coordination centers within a single framework. The strong electronegativity and hydrophobic properties of the macromolecular layer effectively repel anions and exclude free water molecules from the Zn surface, thereby suppressing hydrogen evolution and byproduct accumulation. Meanwhile, the preferential ion channels enriched with Lewis-base sites provide favorable Zn 2+ coordination environments, accelerate desolvation kinetics, and promote preferential ion migration, ultimately lowering nucleation barriers and homogenizing Zn 2+ flux. Benefiting from this regulation of interfacial chemistry and transport kinetics, the modified Zn anode achieves dendrite-free and highly reversible Zn plating/stripping, delivering a long cycling lifespan (3600 h at 1 mA cm −2 and 1 mAh cm −2 ), high Coulombic efficiency (99.7% after 1200 cycles), and excellent full-cell capacity retention (95% after 2000 cycles).

CAS / MDL: 51851-37-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CATALYSIS TODAY · 2026 · IF 5.1

The key role of Co electron density in regulating guaiacol hydrodeoxygenation pathways over Co-Zn catalysts

Nan Yang,Yaru Xue,Zehui Ma,Furang Li,Li Dong,Xiaoxuan Yin,Junhao Liu,Fei Wang,Jianye Fu,Xinmei Liu,Yuchao Lyu

The hydrodeoxygenation (HDO) of lignin-derived guaiacol offers an alternative to fossil-based routes for cyclohexanol production. However, the guaiacol HDO involves multiple parallel and sequential reactions, making the control of reaction pathways particularly challenging. In this work, Co-Zn-based HDO catalysts were synthesized using layered double hydroxide (LDH) as a precursor. The Co particle size decreases and electron density increases, while oxygen vacancy (Ov) concentration rises compared to monometallic Co, yielding higher activity and cyclohexanol selectivity. Most importantly, kinetic study reveals that electron density of Co plays a determining role in governing the HDO pathway. The guaiacol hydrogenation mainly follows two pathways over the Co-based catalyst: guaiacol → phenol → cyclohexanol (Pathway Ⅰ) and guaiacol → phenol → cyclohexanone → cyclohexanol (Pathway Ⅱ). Electron rich Co facilitates C aryl -OCH 3 bond cleavage of guaiacol to form phenol. It also selectively enhances adsorption and hydrogenation of aromatic ring while keeps the hydroxyl group intact as confirmed by the DFT calculations, favoring conversion of phenol to cyclohexanol (Pathway Ⅰ) rather than cyclohexanone (Pathway Ⅱ). These findings provide theoretical guidance for the rational catalyst design and regulation of reaction pathways in guaiacol hydrodeoxygenation.

CAS / MDL: 112-40-3 544-76-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MICROCHEMICAL JOURNAL · 2026 · IF 5.2

Conductive bimetallic metal–organic framework enforced electrochemical biosensor for high-performance monitoring Escherichia coli O157:H7 in animal derived food

Qi Li,Xiao Xiao,Yue Wang,Rui Wang,Qinzhi Wang,Wei Wu

In this work, a versatile conductive bimetallic metal–organic framework combined with aptamer enhanced electrochemical biosensor based on glassy carbon electrode (CMOF/Apt/GCE) was successfully developed for highly sensitive and selective detection of E. coli O157:H7 in animal derived food. The CMOF with large surface area provided an abundance of binding sites for aptamers, which greatly enhancing the selectivity of sensor for E. coli O157:H7. Furthermore, the excellent conductivity of CMOF dramatically improves the electron transfer rate on the modified surface of GCE, contributing to sensitively sensing of E. coli O157:H7. Based on CMOF/Apt/GCE, the E. coli O157:H7 was detected with a low limit of 2.5 CFU·mL −1 and a wide detection range from 10 to 10 7  CFU·mL −1 , superior than those of most previous works. Moreover, it can be applied to pork, chicken, and shrimp samples with good recovery, which indicated its great potential in practical food safety monitoring.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Nano Materials Science · 2026 · IF 20.5

One-pot aqueous co-assembly of biomimetic structural composite paper for synergistic enhancement of thermal conductivity and dielectric properties in advanced electronics

Jianbin Sun,Man Liu,Shi Feng,Tianqi Jiang,Chengyao Liang,Jialiang Zhou,Yanhong Wei,Li Song,Yan Yu,Zexu Hu,Liping Zhu,Hengxue Xiang,Meifang Zhu

The increasing thermal and electrical demands of next-generation transformers and precision electronics necessitate the development of insulating materials that simultaneously exhibit high thermal conductivity, superior dielectric properties, and long-term reliability. Traditional aramid-based papers, while offering outstanding thermal stability and insulation, suffer from intrinsically low through-plane thermal conductivity. In this work, we report a nacre-inspired composite paper consisting of aramid nanofibers, guar gum, and mica (ANFs/GG/Mica), fabricated via a one-pot aqueous co-assembly process amenable to continuous manufacturing. Multivalent hydrogen bonding between amide groups, hydroxyl segments, and silanol surfaces forms a robust organic–inorganic interface, significantly reducing both interfacial thermal resistance and charge-carrier mobility. The optimized composite exhibits a through-plane thermal conductivity of 2.87 W m −1 K −1 at 150 °C and a dielectric breakdown strength of 86.9 MV m −1 , corresponding to enhancements of 62% and 28%, respectively, compared with pristine ANF paper. Notably, the composite paper retains over 70% of its mechanical strength after 168 h of ultraviolet (UV) aging, demonstrating excellent environmental stability. This work presents a flexible assembly strategy that leverages layered alignment and dense interfacial bonding to achieve a well-balanced combination of heat conduction, electrical insulation, and reliability.

CAS / MDL: 67-68-5 9000-30-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
FOOD HYDROCOLLOIDS · 2026 · IF 13.8

Improved functional properties of rice proteins via ultrasound assisted protein glutaminase (PG) deamidation: Insights into the structure-solubility relationship

Hairong Huang,Huan Liu,Mingyong Xie

Poor solubility of rice protein (RP) severely limits its industrial application and functionalized modification of this sustainable resource holds great significance. Herein, ultrasound assisted protein glutaminase (PG) deamidation was employed to modify RP, and the conformational-solubility relationships were further elaborated by systematically evaluating the alterations in structural and functional properties. The results revealed that ultrasound-assisted deamidation significantly increased the absolute value of ζ-potential with enhanced electrostatic repulsion, accompanied by alterations in secondary and tertiary structure as manifested by decreases in the β-sheet contents and the increases in the α-helix contents and fluorescence intensity. Furthermore, co-modification process effectively disrupted the disulfide bonds within RP molecules and resulted in a significant reduction in particle size, accompanied by a deterioration in thermal stability. The improved flexible structure of RP was more conducive to hydration, as evidenced by an increase in solubility from 1.53% to over 65%, meanwhile, the foaming, emulsification and in vitro digestion properties of RP treated with ultrasound-assisted deamidation were also remarkably improved. This study can provide a theoretical basis and technical support for the modification of plant proteins, aiming to expand their applications in the food industry.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Nanoscale · 2026 · IF 5.2

Efficient Ce–Ti/coal gangue catalysts via microwave synthesis for NH3-SCR: enhanced activity and mechanistic insights

Haozhou Wang,Ming Zhao,Fu Zhao,Weixiang Shang,Hongxia Li,Ran Zhao,Peiliang Guo,Jinxiao Bao

This study successfully synthesized a series of 15Ce–xTi/CG catalysts with different TiO2 loading levels by integrating hydrothermal synthesis, impregnation techniques, and subsequent microwave sintering. To comprehensively evaluate the catalytic activity, microstructure, surface properties, and reaction mechanisms of the catalysts, a range of advanced techniques was employed, including NH3-SCR testing, XRD, XPS, SEM, BET, NH3-TPD, H2-TPR, and in situ DRIFTs. The experimental findings revealed that the incorporation of TiO2 significantly enhanced both the structural integrity and functional performance of the catalysts. Specifically, TiO2 facilitated stronger interactions between Ce and Ti, increased the Ce3+/(Ce3+ + Ce4+) ratio, enriched the surface acidic sites, and boosted the concentration of chemically adsorbed oxygen species. Among all the catalysts, 15Ce–6Ti/CG demonstrated superior NO conversion efficiency (exceeding 92% at 300 °C) and maintained high activity across an extensive temperature range of 250–400 °C, while exhibiting remarkable resistance to SO2 and H2O poisoning. In situ DRIFTs experiments further corroborated the coexistence of both Eley–Rideal and Langmuir–Hinshelwood mechanisms, indicating that the catalytic process can proceed via multiple pathways. These results highlight the synergistic effects between Ce and Ti species, as well as the structural advantages of coal gangue as a sustainable support material, providing critical insights for the development of high-performance, environmentally friendly NH3-SCR catalysts.

CAS / MDL: 67-56-1 67-68-5
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
CERAMICS INTERNATIONAL · 2026 · IF 6

Impact of heavy lead oxide on structural, optical and ligand field properties of B2O3–Na2O–NiO glass matrix

Hesham Y. Amin,Safia Abdullah R. Alharbi,Abd El-razek Mahmoud,Essam A. Elkelany

Herein, a nickel-doped borate glass system, with variable additions of lead oxide, was prepared by melting and air quenching method. The impact of heavy lead oxide on structure, optical, electronic transitions, ligand field and nonlinear optical features was investigated. The glass structure was scrutinized by XRD, indicating the amorphousness of the current glass. The measured and empirical densities increased with lead oxide additions, indicating the densification of the network, while comparing both densities confirms the randomness of the glass network. Infrared spectra confirmed the deteriorated existence of non-bridging oxygen (NBO) bonds and the high ability of lead oxide to modify the glass network and form different structural units such as Pb . The current optical studies revealed the existence of ions in octahedral coordination, with high optical activity within some of the optronic transitions that were observed in visible and infrared regions. Among these optronic transitions, the transitions at 429, 524, 805 and 1222 nm were exploited using a Gaussian deconvolution process to determine the splitting energy and Racah parameters. Bewitchingly, the splitting energy increased; meanwhile, the Racah B and C parameters decreased, indicating that the lead addition increased the ligand- ions interaction energy and decreased the internal electronic interactions inside d-orbitals of ions. As a result of these interactions, the covalent bonding nature increased. Furthermore, lead oxide additions push the glass edges toward low energy, mitigating the optical band gaps from 3.41 eV to 2.92 eV, while Urbach energy increased due to enhanced amorphousness. Due to the higher polarizability of lead ions, the linear and non-linear optical properties of current glasses are enhanced.

CAS / MDL: 1317-36-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
RENEWABLE ENERGY · 2026 · IF 9.1

Rational engineering bifunctional In2S3/Zn3In2S6 heterojunctions with double sulfur vacancies for efficient solar-driven photocatalytic H2 and H2O2 generation

Shengqu Zhang,Enli Liu,Jiaxing Liu,Xintao Feng,Yaping Jian,Yinhua Jiang,Yuanzhi Hong

The advanced photocatalytic technology with conversion of renewable solar energy to the clean hydrogen (H 2 ) and hydrogen peroxide (H 2 O 2 ) chemicals can effectively realize the national goals of “carbon emission peak & carbon neutrality”. To this end, the indium sulfide (In 2 S 3 )/zinc indium sulfide (Zn 3 In 2 S 6 ) heterojunctions with double sulfur vacancies (Vs) were successfully prepared by a feasible in-situ hydrothermal approach. The as-formed heterojunctions (denoted as Vs-ISZIS6) showed the high-performance bifunctional activities towards the both photocatalytic H 2 evolution and H 2 O 2 generation. Especially, the 10Vs-ISZIS6 sample presented the highest photocatalytic H 2 production rate (7051 μmol/h/g), which is 32.1, 2.0, 14.4, and 1.4-folds greater than that of In 2 S 3 , Zn 3 In 2 S 6 , VS-In 2 S 3 , and Vs-Zn 3 In 2 S 6 , respectively. In addition, the 20Vs-ISZIS6 heterojunction possessed the optimum concentration of H 2 O 2 production with reaching 256.4 μM under 2 h of visible-light irradiation. The boosted photocatalytic performances might be caused by the synergistic effect of the presence of Vs and the construction of heterostructure between Vs-In 2 S 3 and Vs-Zn 3 In 2 S 6 , leading to the increasing visible-light absorption and promoting the photogenerated carriers separation efficiency. As a result, the possible mechanism of improved photocatalytic performances of the Vs-ISZIS6 heterojunctions was proposed. This work offers an available avenue for developing of nanostructured heterojunctions for sustainable solar-to-chemical fuel conversion.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ANALYTICA CHIMICA ACTA · 2026 · IF 6.1

Portable smartphone-assisted fluorescence platform based on dual-excitation nitrogen-doped carbon dots for simultaneous detection of chlorogenic acid and tinidazole

Junyuan Shi,Zihang Yin,Dejin Lin,Dingfeng Wang,Siting Peng,Wendi Xiao,Houwen Hu,Jiong Cheng,Da Chen

The pervasive issue of pharmaceutical overuse in agriculture and veterinary practice has led to the alarming accumulation of drug residues within the global food supply chain, posing a direct and escalating threat to consumer safety. Among these contaminants, compounds such as chlorogenic acid (CGA) and tinidazole (TNZ) are of particular concern due to their potential to provoke allergic responses and cause long-term adverse health effects. There is an urgent need for the development of rapid and reliable detection techniques capable of on-site monitoring to effectively mitigate these risks and ensure food safety. Herein, our work develops an innovative ratiometric sensing strategy that utilizes the dual-excitation properties of nitrogen-doped carbon dots (N-CDs) to simultaneously detect CGA and TNZ. Remarkably, as a fluorescent nanoprobe, N-CDs are capable of detecting CGA over a concentration range of 0.036-40 μM with a limit of detection (LOD) of 36 nM, which is attributed to static quenching (SQE) and the inner filter effect (IFE). Differently, the addition of TNZ results in fluorescence quenching of N-CDs via localization of inner filter effect (L-IFE), presenting the LOD of 68 nM within the 0.068-25 μM range. Furthermore, a portable smartphone-assisted platform which incorporates the N-CDs/PVA composite film successfully enables visual detection of CGA and TNZ with satisfactory recoveries in real samples. These results suggest that the developed portable smartphone-assisted fluorescence platform enables accurate dual-target detection of CGA and TNZ while offering outstanding stability and reproducibility suitable for on-site applications. Consequently, our methodology presents a versatile and practical strategy for real-time pharmaceutical residue screening, significantly advancing food safety monitoring capabilities.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。