JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
·
2025
·
IF 14.3
Moxi Yele,Gegen Sarula,Jie Yang,Long Yang,Hao Zhang,Longfu Chen,Xiangmei Zhang,Jiahui Wang,Tianyu Wang,Chengzhong Jin,Benliang Liang,Luting Yan
The development of high-performance structural-functional composites capable of reconciling mechanical robustness with multifunctional integration remains a critical challenge. Inspired by the hierarchical structure of nacre layers, we have created flexible ternary composites featuring an interpenetrating three-dimensional (3D) network of MXene (Ti 3 C 2 T x ), graphene nanosheets (GNs), and aramid nanofibers (ANF). This multiscale strategy synergistically combines hydrogen bonding and a nacre-mimetic hierarchical structure with a 3D interpenetrating network, enabled by GNs for interfacial lubrication to overcome the strength-toughness trade-off while facilitating multifunctionality. The optimized MXene-GNs/ANF (60 wt% MXene-GNs, 50:50 ratio, 28 μm thickness) achieves exceptional mechanical properties: tensile strength of 175.10 ± 3.80 MPa, strain at break of 18.56% ± 0.78%, toughness of 15.88 ± 0.60 MJ m −3 . Simultaneously, it shows an electromagnetic interference shielding effectiveness (EMI SE) of 36.4 dB (8.2–12.4 GHz) and in-plane thermal conductivity (TC) of 11.58 W m −1 K −1 . Increasing the thickness to 65 μm further enhances EMI SE to 40.2 dB and TC to 23.21 W m −1 K −1 , outperforming most reported analogues. The composite also exhibits excellent thermal stability, with no significant weight loss below 558°C in the N 2 atmosphere, as well as multifunctional properties such as rapid Joule heating (∼160°C at 4 V), environmental resilience, and flame-retardant fire alert. By harmonizing interfacial interactions and hierarchical structuring, this work provides a scalable route to advanced flexible materials for next-generation wearable electronics and extreme-environment applications requiring integrated mechanical durability EMI shielding, and thermal management.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2025
·
IF 6.3
Xinyu Pang,Qifan Liu,Maokun Li,Zhanhui Fan,Chao Yang,Jianhui Qiu,Minhua He,Limin Zang
Manganese-based aqueous zinc-ion batteries (AZIBs) have garnered growing interest in the area of adaptable and wearable devices because of their properties of simple manufacturing, superior safety, and ecological compatibility. Nevertheless, the actual implementation of Mn-based cathodes has faced challenges due to their inadequate conductivity and poor cycling performance. In this study, a chemical synthesis approach was employed to directly grow MnO 2 on the surface and within the interlayer spaces of MXene. Subsequently, the composite was coated onto carbon felt (CF) using the impregnation method to fabricate binder-free MnO 2 /MXene/CF cathodes for AZIBs. The excellent conductivity and structural stability of MXene effectively enhance ion/electron transport kinetics and mitigate irreversible volume changes of MnO 2 during charge and discharge processes. CF with excellent electrical conductivity and flexibility serves as an ideal current collector and substrate material for loading active materials. Moreover, its distinctive three-dimensional porous structure facilitates optimal interaction between the electrode material and the electrolyte. Consequently, the flexible quasi-solid-state AZIB, consisting of the optimized MnO 2 /MXene/CF cathode and zinc foil anode, exhibits high charge storage performance (a specific capacity of 429.1 mAh g −1 at 0.1 A g −1 and an excellent energy density of 343.2 Wh kg −1 at 79.9 W kg −1 ). Density functional theory analysis reveals that the incorporation of MXene enhances electron adsorption on MnO 2 and significantly alters the density of states of MnO 2 , thus markedly improving its conductivity. These encouraging findings suggest that manganese-based materials hold great potential for application as cathodes in flexible quasi-solid-state AZIBs.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2025
·
IF 5.4
Wei Zhang,Hengrui Wang,Siyi Ji,Yongqian Shi,Jiefeng Gao,Long-Cheng Tang,Pingan Song
In today's digital era, electromagnetic radiation pollution and fire hazard stand as a dual-edged sword, not only diminishing the efficacy of sophisticated electronic devices but also threatening human health. As a result, the pursuit of advanced electromagnetic shielding materials with high flame retardancy has ascended to the forefront of research priorities, underscoring their crucial role in mitigating these risks. In this study, pyrrole polymerization was employed to obtain a modified PPy-MXene, which was used to construct flame retardant modified MXene aerogel composites by the "Concreting" method. It was found that peak heat release rate, the total heat release, peak CO₂ production rate, peak smoke production rate and total smoke release of the C 1 M 2 MT FRs were reduced by 67.7 %, 46.7 %, 71.4 %, 71.7 % and 77.3 %, respectively. Furthermore, the average electromagnetic interference shielding effectiveness of C 1 M 2 MT FRs in the X-band and K-band reached 67.3 dB and 91.4 dB, respectively. It was noted that CMMT FRs had the ultra-low reflectivity (as low as 0.14). Additionally, the mechanical durability and strength of the aerogel composites were obviously enhanced, with compressive stress increased by a factor of 3.2, in comparison with that of the CNF aerogel.
✓ 已验证
产品关联
DOI
高影响因子
TRIBOLOGY INTERNATIONAL
·
2025
·
IF 6.9
Zheng Yang,Zihan Wang,Jinjin Li,Songlin Ding,Shuang Yi
Magnesium alloys, valued for low density and high strength, are extensively used but challenged by poor corrosion resistance, complicating machining processes. This study introduces a novel bio-microcapsule nanofluid combining diatomite earth (DE) and Mo₂CTₓ MXene nanoparticles as cutting fluids. Comprehensive tests analyzed cutting forces, friction, tool wear, surface quality, and chip morphology. Results showed DE@Mo₂CTₓ MXene nanofluids reduced cutting force by 29.6 %, friction force by 65.7 %, surface roughness from 6.2 μm to 2.1 μm (66.1 % improvement), and coefficient of friction from 0.55 to 0.29. These nanofluids demonstrated superior lubrication and heat dissipation, significantly enhancing machining performance and surface integrity, highlighting promising applications for precision-critical industries machining magnesium alloys.
✓ 已验证
产品关联
DOI
高影响因子
Reaction Kinetics Mechanisms and Catalysis
·
2025
·
IF 1.7
Wang Yunqian,Shi Haixiang,Chen Liuyun,Su Tongming,Luo Xuan,Xie Xinling,Ji Hongbing,Qin Zuzeng
NiIn intermetallic compounds are constructed over V 2 CT x MXene for the selective hydrogenation of cinnamaldehyde (CAL) to cinnamyl alcohol (COL). Ni 4 In/V 2 CT x demonstrated a conversion rate of 93.6% for CAL, with a high selectivity of 77.4% for COL. The COL yield of Ni 4 In/V 2 CT x is much greater than that of Ni 4 In, Ni/V 2 CT x , and Ni 4 In/Al 2 O 3 . Moreover, the V 2 CT x support is the key to the formation of NiIn intermetallic compounds, which effectively inhibit the oxidation of metallic Ni. NiIn metal particles are uniformly distributed on the surface of V 2 CT x , increasing the metal‒support interaction. Electron-deficient metallic Ni and In inhibit the hydrogenation of the C=C bond. Furthermore, the introduction of In provides more abundant and stronger Lewis acid sites, facilitating the adsorption of C=O bonds and thereby enhancing the selectivity for COL.
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2025
·Vol. 15
·期 14
·11271-11282
·
IF 4.6
Fang Li,Shuyue Xiong,Yijun Tan,Mingming Luo,Zijian Wu
Antibiotics play an excellent role in preventing and treating animal diseases, but their improper use poses a potential threat to public health. Designing a sensing platform to detect trace amounts of antibiotic residues in actual samples is a significant challenge. To achieve this objective, a self-assembly aptasensor based on a two-round signal amplification strategy for kanamycin (KANA) trace detection was demonstrated by employing carbon dot (CD) decorated Ti3C2 MXene as electrode modification material and the complex of double-stranded DNA (dsDNA) and methylene blue (MB) as probes, where dsDNA was composed of complementary DNA (cDNA) and aptamers. The CDs can effectively suppress the self-stacking of Ti3C2 MXene to promote electron transfer and provide plenty of exposed active sites for the aptamer to capture KANA precisely. The MB inserted into dsDNA would be liberated upon interaction with KANA due to a competitive process that occurs among cDNA and KANA, reducing electrical signal. Under the optimal conditions, the constructed aptasensor exhibited a good linear relationship between the output signal and the logarithm of KANA concentration in the range of 1 fM–1 mM, and the limit of detection is 0.892 fM. The satisfactory selectivity, stability, and reproducibility suggested that the prepared aptasensor can be a universal platform to detect other antibiotic residues by anchoring corresponding aptamers. Furthermore, it has been successfully applied to determine KANA in milk samples (recovery rates ranged from 101.01% to 107.21%, and the RSD was below 5%), demonstrating potential application prospects in the food-safety analysis field.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Xue Bai,Qin Wang,Mingzhe Tan,Panpan Zhang,Shiyu Sun,Di Wu,Haoran Mei,Guoqiang Shan,Na Wang,Hongxun Hao,Ting Wang,Xin Huang
Solar-driven interfacial evaporation (SIE) technology stands out as a promising approach for seawater desalination, leveraging solar energy efficiently in an environmentally friendly manner. However, the enrichment of organic pollutants on the interfacial evaporator has posed significant obstacles to the sustained implementation of SIE. Herein, a spongy, anti-pollution cellulose acetate membrane consisting of Ag 2 S-doping MXene nanosheets (MT-Ag 2 S/CAM) is proposed for sustainable desalination. The MT-Ag 2 S/CAM exhibited ultralow water vaporization enthalpy of 1.50 kJ g −1 . Meanwhile, the MT-Ag 2 S/CAM, featured by high porosity (75.25 %), excellent light absorption and salt resistance, demonstrated a notable solar-driven evaporation rate of 1.8 kg m −2 h −1 and a remarkable photothermal conversation efficiency of 91.6 % under one sun irradiation. Meanwhile, MT-Ag 2 S/CAM can realize a removal efficiency of 93.3 % for methylene blue, exhibiting outstanding anti-pollution and self-cleaning capabilities as well as long-term stability due to its strong mechanical properties. Finally, a device for sustainable desalination, water purification and clean water collection is designed and implemented in a practical SIE process.
✓ 已验证
DOI
高影响因子
RSC Advances
·
2025
·Vol. 15
·期 13
·10298-10309
·
IF 4.6
Wenjuan Zhang,Xiangyue Yang,Youliang Wang,Yaxian Wang,Xuyang Wu,Yongqian Shen
As wireless communication technologies and electronic devices continue to advance quickly, electromagnetic waves (EMWs) have a serious impact on equipment interference and human health. The development of new materials for EMW absorption and shielding is crucial to mitigate electromagnetic (EM) interference. In this study, a unique strategy was implemented for developing a mesoporous polypyrrole/MXene (mPM) composite. The mPM composite was prepared by a molecular synergistic self-assembly method using spherical block copolymer micelles as templating agents to regulate mesopores. The effects of the polypyrrole/MXene ratio and pore size on the EMWs absorption performance of composites were systematically investigated. The mPM composite formed by MXene and polypyrrole exhibits a well-developed porous structure and conductive network, significantly enhancing dielectric loss. The rich mesoporous structures and the multi-layer heterogeneous interfaces can improve the interface polarization, realize multiple reflections, and enhance the EMWs absorption performance of the mPM. The mPM-1 composite, prepared using the PS100-b-PEO114 template, achieved a reflection loss (RL) of −67.82 dB at an MXene to polypyrrole ratio of 1 with a matching thickness of 1.37 mm. Its effective absorption bandwidth (EBW) was 3.68 GHz (ranging from 14.16 to 17.84 GHz) with a matching thickness of 1.25 mm. It is a reliable way to develop absorbing materials with light, thin, large EBW and high-quality EMWs absorption performance.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2024
·
IF 4.9
Yan Li,Han Zhang,Guo Qu,Lingying Xie,Sisi Tang,Hang Lei,Yuxia Zhong,Yue-Fei Zhang
A novel chitosan-based composite hydrogel (CS/PEI-MXene) made of polyethyleneimine and Ti 3 C 2 MXene as modifiers and acrolein as crosslinker has been synthesized simply and conveniently, which could be applied in the removal of residual antibiotic pharmaceuticals (chlortetracycline (CTC), ibuprofen (IBU), etc.) from aqueous environments. The CS/PEI-MXene was used as an adsorbent for chlortetracycline and ibuprofen. The removal rates of CTC and IBU could be achieved to 91.1 % and 99.25 %, respectively. In addition, the reusability of CS/PEI-MXene for CTC and IBU appeared good capacity, and the removal rate was maintained at approximately 70 % after five cycles. FT-IR, XPS, and zeta potential were used to show that the hydrogel was successfully synthesized, and its physicochemical characteristics were studied. Systematically examined were conducted on the effects of pH (3−10), contact time (0–120 min), and temperature (30–40 °C) on the adsorption efficiency of CS/PEI-MXene. The adsorption mechanism of CS/PEI-MXene on CTC and IBU mainly included electrostatic interactions and hydrogen bonding. Overall, the development of MXene based hydrogel adsorbent will provide a practical approach to the treatment of wastewater containing antibiotic pharmaceuticals and have great potential for practical applications.
✓ 已验证
DOI
高影响因子
LANGMUIR
·
2025
·
IF 3.9
Mohammad Raza Miah,Jiheng Ding,Hongran Zhao,Qinchao Chu,Hao Wang,Jinggang Wang,Jin Zhu
The development of high-strength titanium carbide (Ti3C2Tx) MXene-PDA nanosheet-based sustainable poly(ethylene-co-1,4-cyclohexane dimethylene 2,5-furan dicarboxylic acid) (PECF) copolyester nanocomposites with superior tensile, thermal, and barrier properties is a promising avenue for advanced materials. However, achieving Ti3C2Tx MXene-based polyester nanocomposites that exhibit exceptional thermal conductivity, and enhanced mechanical and barrier properties remains a significant challenge. In this study, we employed self-assembly technology through layer-by-layer (LBL) coating to create highly saturated Ti3C2Tx MXene-PDA fillers that are uniformly dispersed and strongly bonded within the PECF matrix. This approach enabled the formation of dense nanocomposites with diverse functional properties. Specifically, MPP2 nanocomposites (0.3 wt %) demonstrated excellent mechanical performance, with a compressive tensile strength of 84 MPa and a modulus of 4.4 GPa, alongside remarkable O2, CO2, and H2O vapor barrier properties and superior thermal stability. Compared to pure PECF, the addition of Ti3C2Tx MXene-PDA at a loading of 0.3 wt % resulted in substantial improvements: a 30% increase in tensile strength, a 109% increase in modulus, and significantly enhanced barrier properties for O2 (27.3-times), CO2 (24.7-times), and H2O vapor (5.0-times). These findings highlight the potential of Ti3C2Tx MXene-PDA-reinforced PECF nanocomposites for high-performance applications, offering valuable insights for future materials development.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Jie He,Jiahui Xiao,Qinxing Zhang,Tonghua Men,Yu Wang,Xiaofeng Wang,Bo Wang,Chuntai Liu,Changyu Shen,Wenjuan Han
Utilizing interfacial solar evaporator (ISE) to produce freshwater represents an effective solution to mitigate water scarcity. A key design strategy for improving evaporation efficiency in ISEs involves reducing the evaporation enthalpy of water. Herein, we prepared evaporation layers with varying channel sizes by controlling the cooling temperature, using chitosan and MXene as raw materials crosslinked with glutaraldehyde. These evaporation layers were combined with a chitosan monolith (CM) featuring a honeycomb-like porous structure as the water transport layer, resulting in the successful fabrication of a innovative double-layered interfacial solar evaporator (DISE) which possesses splendid thermal localization ability. The integration of the bilayer structure in DISE enables the evaporation layer to minimize water evaporation enthalpy, while maximizing evaporation efficiency and enhancing salt rejection. Among the samples, DMCML*-1 exhibited superior performance, attaining an evaporation rate of 3.01 kg m −2 h −1 under 1 kW m −2 simulated sunlight. It manifested excellent capabilities for seawater purification and wastewater recycling, maintaining stable evaporation rates over extended operational periods. This research not only provides an innovative method for the development of environmental, cost-effective, and high-efficiency ISEs but also addresses the challenge of balancing reduced evaporation enthalpy with enhanced water transport capacity, offering valuable insights for advancing the field.
✓ 已验证
产品关联
DOI
高影响因子
Soft Science
·
2025
·Vol. 5
·期 2
·N
·
IF 9
Mengjie Huang,Shun Liu,Yalin Chi,Jianwei Li,Hongling Sun,Lin Dong,Hu Liu,Chuntai Liu,Changyu Shen
Conductive hydrogels have drawn significant attention as smart sensing systems for flexible electronics. However, challenges remain in fabricating multimodal electronics that simultaneously achieve ultrastretchability, conformal adhesion, environmental adaptability, self-healing, and high-performance sensing for electrophysiological signal detection. In this study, a nanocomposite organohydrogel with these features is developed by incorporating chitosan-encapsulated MXene nanosheets into a polyacrylamide network within a phytic acid (PA)/glycerol (GL)/water trisolvent system, aiming to create a multimodal sensing platform. The synergy between hydrogen bonds and electrostatic interactions endows the organohydrogel with exceptional properties, including ultrastretchability (2,800%), robust adhesion (70.6 kPa on paper), and self-healing ability. The combination of PA and GL not only enhances the organohydrogel’s environmental adaptability (-30 to 60 °C) to meet diverse application requirements but also improves its conductivity. These remarkable features enable the organohydrogel to function as a multimodal sensor capable of detecting multiple stimuli (strain and temperature) with high sensitivity and strong robustness against external disturbances. Moreover, it serves as a reliable electrode for electromyography signal detection, providing a high signal-to-noise ratio and low interfacial impedance. By integrating deep learning algorithms, the organohydrogel sensing system achieves 100% accuracy in ball sports identification, showcasing its potential for multimodal sensing platforms.
✓ 已验证
产品关联
DOI
高影响因子