APPLIED SURFACE SCIENCE
·
2026
·
IF 6.6
Xiaohui Ma,Jianlin Zhao,Mengyao Ren,Xu An,Nan Jiang,Songbo Li,Ping Bai
The design of non-precious metal H 2 -producing photocatalysts for photocatalytic H 2 production remains research hotspots for addressing energy shortages and ecological pollution. Herein, by two-step hydrothermal method, a novel and noble-metal-free Mn 0.43 Cd 0.57 S/ZnSe S-scheme heterojunction was resoundingly designed and constructed for efficient photocatalytic H 2 production. Morphological tests revealed ZnSe were deposited on the Mn 0.43 Cd 0.57 S to form a tight contact interface. The H 2 evolution performance over optimal Mn 0.43 Cd 0.57 S/ZnSe was 9136.67 μmol·g −1 ·h −1 , which was severally 22.88 and 2.18 times that of pure ZnSe and Mn 0.43 Cd 0.57 S, and even far exceeded the activity of ZnSe/1%Pt. The enhanced performance of H 2 evolution was resulted from the formed S-scheme heterojunction with built-in electric fields, which could optimize the electron migration pathways for improving charge separation efficiency. This work manifests Mn x Cd 1-x S solid solution could be used as a promising non-noble metal cocatalyst to modify ZnSe for efficient photocatalytic H 2 evolution, which can be extended to modify other selenides.
✓ 已验证
产品关联
DOI
高影响因子
Catalysis Science & Technology
·
2026
·
IF 4
Ziheng Li,Junxin Guo,Haoze Liu,Dule Huhe,Zhao Wang
Despite their high methanol selectivity in CO2 hydrogenation, In2O3-based catalysts still face limitations in CO2 conversion and long-term stability. This work addresses these challenges by designing a highly dispersed Pd/In2O3 catalyst supported on self-pillared silicalite-1 (SP-S-1) zeolite. The well-defined channels and abundant surface silanol groups of SP-S-1 effectively anchor and disperse In2O3 nanoparticles. This structure also spatially isolates Pd species, which prevents their sintering and inhibits the formation of inactive Pd–In alloys. Comprehensive characterization reveals that the strong metal-support interaction stabilizes oxygen vacancies and prevents over-reduction of In3+ species, which are crucial for CO2 activation and methanol selectivity. The optimized Pd/In2O3/SP-S-1 catalyst achieves a methanol space-time yield of 2.57 gMeOH·gIn+Pd-1·h-1 at 300 °C, approximately five times higher than that of the unsupported counterpart. More importantly, it demonstrates high stability, retaining 95% of its initial activity after 100 hours on stream, far outperforming the unsupported catalyst. This work highlights zeolite confinement as a versatile strategy for designing robust and efficient CO2-to-methanol catalysts.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Lin Zhao,Jiaxuan Zhu,Zhongkai Yu,Yue Xu,Li Li,Jae Su Yu,Wen-Xing Yang,Yongbin Hua
Rare-earth-doped inorganic luminescent materials have attracted substantial interest in the field of functional materials due to their unique optical properties. Nevertheless, realizing efficient visualization applications remains a critical challenge. Herein, we designed a series of full-spectral Sr 9 La(VO 4 ) 7 :Sm 3+ phosphors and systematically investigated their crystal structures, photoluminescence properties, luminescence dynamics, thermal stability, and visualization potential. By constructing an efficient energy transfer pathway from VO 4 3− groups to Sm 3+ ions, the phosphors exhibited tunable emissions from green to near-white region, accompanied by enhanced luminescence intensity and thermal stability. Notably, leveraging the anti-thermal quenching behavior of Sm 3+ and the strong thermal quenching feature of VO 4 3− groups, we developed a visual thermometer with a favorable relative sensitivity (1.7% K −1 ). Additionally, the as-prepared phosphors demonstrated high-resolution latent fingerprint detection, revealing level I–III personal biometric features. This study presents an innovative strategy for achieving bifunctional integrated visualization applications in rare-earth-doped vanadate phosphors.
✓ 已验证
产品关联
DOI
高影响因子
INORGANICA CHIMICA ACTA
·
2026
·
IF 3.3
Jia-Qi Shang,Wenya Jiang,Jingzhe Li,Yimin Wang,ShuaiQi Wang,Kuan-Guan Liu
Two distinct compounds containing the identical new Ag(II) complex cation ([Ag(cyclam)(MeCN)₂] 2+ ) (paired with PF₆ − and OTf − counteranions, respectively) were prepared via reaction of the macrocyclic ligand cyclam (1,4,8,11-tetraazacyclotetradecane) with non-explosive Ag(I) salts (AgPF₆, AgOTf) under ambient room-temperature conditions, with isolated yields of 33% and 31%. Single-crystal X-ray diffraction, electron paramagnetic resonance (EPR, g-tensor = 2.04 in solid state, 2.03 in low-temperature solution), X-ray photoelectron spectroscopy, and mass spectrometry confirmed the formation and stabilization of the Ag(II) center in both compounds. The two compounds exhibit high stability in solid and solution phases and favorable photothermal conversion performance, achieving conversion efficiencies of 50% ([Ag(Cyclam)(MeCN) 2 ](PF 6 ) 2 ) and 74% ([Ag(Cyclam)(MeCN) 2 ](OTf) 2 ).
✓ 已验证
DOI
高影响因子
Materials Today Chemistry
·
2026
·
IF 7.4
Kun Wang,Huihui Yan,Liping Zhao,Ming Wen,Jing Liu,Peng Zhang,Lian Gao
Dry reforming of methane (DRM) offers a promising route for syngas production while mitigating two greenhouse gases (CH 4 and CO 2 ). However, the surface thermodynamics of reactant adsorption remain elusive due to the lack of quantitative tools. Herein, we synthesize self-supporting hollow Al 2 O 3 nanofibers decorated with Ni, NiCo, and NiCu alloys via blow spinning, eliminating the need for pelletization. Among these, NiCo/Al 2 O 3 exhibits superior activity (85% CH 4 conversion at 800 °C) and coking resistance (0.84 wt% carbon after 50 h). For the first time, we quantify the adsorption enthalpies of CH 4 , CO 2 , and H 2 on these catalysts using gas adsorption calorimetry. Notably, CH 4 —a stable tetrahedral molecule—chemisorbs exothermically on Ni sites at 298 K, with enthalpies of −55.2 (NiCo), −78.2 (NiCu), and −87.5 kJ mol −1 (Ni). A strong structure-enthalpy-activity correlation emerges: overly exothermic adsorption hinders catalytic turnover by stabilizing surface intermediates. This thermodynamic framework provides a lens to rationally design DRM catalysts.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2026
·
IF 19.7
Jiankang Zhang,Hao Xu,Jie Gan,Shuangfeng Xing,Xinshuo Zhao,Yong Qin
Utilizing the synergy between metal and oxygen vacancy (Ov) on reducible supports is a promising route to modulating catalytic performance. Herein, defective CeO 2 nanorods supported Pt dual-site catalysts with high-dispersion cluster and specific Ov concentration were finely constructed by combining atomic layer deposition and the designed hydrogen activation strategy. The Pt clusters deposited on CeO 2 not only can promote more Ov generation through the hydrogen spillover effect, but also can stabilize the generated Ov via the stored active hydrogen. Meanwhile, the Ov also serves as the anchoring sites of Pt clusters inhibiting their agglomeration. We independently modulate the Ov concentration of ceria while preserving nearly unchanged cluster size, which enables the quantitative analysis of the effect of individual Ov concentration on catalytic activity and stability. The Ov concentration-activity relationship is established presenting a volcano-shape curve, and the optimized Pt n /CeO 2-x -350R catalysts with a mean particle size of 1.1 nm and suitable Ov concentration (3.55 ×10 13 spins g −1 ) exhibit excellent H 2 production activity and much-enhanced durability for hydrolytic dehydrogenation reaction of ammonia borane (AB), whose activity is 4-fold higher than that of as-prepared Pt n /CeO 2 cluster catalysts. Experimental and theoretical calculation results indicate that electron-rich Pt cluster is responsible for the barrierless activation and dehydrogenation of AB, while Ov affords the adsorption site for H 2 O molecules and forms synergistical dual sites promoting the adsorption−dissociation of H 2 O molecules being the rate-determining step.
✓ 已验证
产品关联
DOI
高影响因子
Nanoscale
·
2026
·
IF 5.2
Jiaxin Liu,Ke Wang,Tongtong Yu,Zhongkang Cao,Shangyun Chen,Xu Zhang,Peiyu Wang,Bingjun Yang,Juan Yang,Huiju Wang,Pengjun Ma
Transition metal phosphorus sulfides, owing to their unique 2D layered structure and inherent cost-effectiveness, have emerged as promising electrocatalysts in the urea oxidation reaction (UOR). However, they encounter a notable challenge that the dense stacking of their layers drastically restricts the exposure of electrochemically active sites and diminishes electron transfer efficiency, thereby directly leading to subpar performance in the UOR. Herein, based on an intercalation–exfoliation method, a novel layer structural regulation strategy for achieving few-layer FePS3 has been proposed. The results demonstrated that the interlayer stacking of pristine FePS3 could be significantly diminished, with the average layer thickness reducing from 25 nm to an impressive 8 nm. Benefiting from the changes in the layer structure, the few-layer FePS3 exhibits excellent UOR activity, requiring only 1.371 V (vs. RHE) to deliver 10 mA cm−2 and maintaining a low potential of 1.545 V at 300 mA cm−2, which is due to the enhanced exposure of electrochemically active sites and the increased electron transfer efficiency. Simultaneously, the mechanism of enhancing the UOR has been elucidated through in situ Raman and XPS studies. When the UOR of the FePS3/NF couples with the HER of Pt to achieve full electrolysis, the few-layer FePS3/NF system could achieve a urea degradation efficiency of 67.88% after 12 hours, significantly exceeding that of the pristine FePS3/NF system (50.3%). Hence, this work presents a novel strategy for regulating the layered structure of 2D FePS3 to fulfil the synergistic demands of highly efficient urea degradation and low-energy H2 production.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
POLYMER
·
2026
·
IF 5.1
Yongliang Ding,Lieshun Cai,Siyu Liu,Jindong Li,Qihao Huang,Yu Fang,Qingmin Yang,Xi Li,Zhongkai Wang,Xiankun Wu
The design of sustainable polymers that combine high strength, ductility, and compatibility with existing bioplastics remains a critical challenge. Here we report a castor-oil-derived sulfur-containing copolyamide (PAS-X) synthesized via thiol-ene click reaction followed by melt polycondensation, providing a scalable route for high-performance bio-based materials. The incorporation of flexible thioether linkages and strongly hydrogen-bonding amide motifs enables precise control over chain mobility, crystallinity, and mechanical response. The optimized copolymer, PAS-50, exhibits a tensile strength of ≈39.8 ± 2.4 MPa and a work-to-fracture of ≈120.7 ± 8.0 MJ m −3 . When blended with polylactic acid (PLA) at low loadings (≤5 wt%), PAS-50 forms robust hydrogen-bond-mediated interfaces that induce a brittle-to-ductile transition, increasing fracture toughness from 9.2 MJ m −3 to 60.7 MJ m −3 without sacrificing yield stress. This work establishes a chemically simple and industrially viable approach to transform renewable plant-oil derivatives into multifunctional polyamides, offering a general framework for hydrogen-bond-assisted design of strong and tough bio-based polymers.
✓ 已验证
产品关联
DOI
高影响因子
PROGRESS IN NUCLEAR ENERGY
·
2026
·
IF 3.2
Mei Li,Lina Yan,Rugeng Liu,Wei Han
To study the impact of fission product elements on spent nuclear fuel during high-temperature oxidation, this study selected yttrium (Y) as a representative element. UO 2 pellets doped with varying mass fractions of Y 2 O 3 (1, 3, and 5 wt%) were fabricated via high-temperature sintering. The results indicate that both the lattice parameter and grain size decreased with increasing dopant concentration, while the oxidation temperature increased significantly. Characterization of the oxidation products demonstrated a gradual reduction in U 3 O 8 content and a decrease in the average valence state of uranium ions as the Y 2 O 3 content increased. Kinetic analysis indicated an increase in the activation energy for UO 2 oxidation from 88.32 ± 2.21 kJ/mol (pure UO 2 ) to 122.27 ± 3.05 kJ/mol (5 wt% Y 2 O 3 - doped sample), confirming that Y 2 O 3 doping elevates the energy barrier for oxidation. This work provides critical data and a theoretical foundation for understanding the behavior of spent fuel containing rare earth fission products during oxidative volatilization, thereby offering valuable insights for optimizing spent fuel reprocessing strategies.
✓ 已验证
DOI
高影响因子
JOURNAL OF ENVIRONMENTAL MANAGEMENT
·
2026
·
IF 9.2
Shanshan Feng,Ke Liu,Donghui Li,Lixiang Shi,Wenqi Nie,Shiduo Hao,Yunpu Zhai,Yonggang Liu
The photo-Fenton method presents a promising approach for wastewater treatment, yet it faces several significant challenges, including the continuous supply of H 2 O 2 , slow mass transfer rates and a limited operational pH range. In this context, we describe the successful preparation of a novel catalyst: n-p type graphitic carbon nitride nanosheets engineered with nitrogen vacancies and decorated with Cu 2 O-T, which is characterized by controllable crystal planes. This photo-self-Fenton-like catalyst is designed for the in-situ production and activation of H 2 O 2 . The optimized catalyst, CNC-20, demonstrates remarkable efficiency in degrading various organic pollutants, showcasing high cyclic stability and wide applicability. Notably, CNC-20 achieves a degradation rate of 98.8% for tetracycline hydrochloride within 60 min, with a reaction rate constant 4.2 times greater than that of pristine carbon nitride. Characterization studies illustrate that the construction of ultrathin carbon nitride nanosheets featuring nitrogen vacancies, combined with the co-exposure of Cu 2 O-T crystalline planes (111) and (100), significantly enhances carrier separation efficiency, thereby facilitating effective H 2 O 2 generation. Furthermore, Cu 2 O-T plays a crucial role in the direct capture of in-situ generated H 2 O 2 , rapidly activating it to generate abundant ·OH, which effectively mitigates the issue of slow mass transfer associated with H 2 O 2 . This study presents a novel approach integrating in-situ H 2 O 2 generation and activation, effectively overcoming the inherent limitations of traditional photo-Fenton reactions and providing a promising strategy for pollutant degradation in wastewater treatment systems.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COMPOSITES PART B-ENGINEERING
·
2026
·
IF 14
Yaozu Hui,Xiaoming Chen,Yanjie Gao,Luca Magagnin,Yijie Wang,Kenan Kong,Xinye He,Jie Zhang,Jinyou Shao
Achieving a synergistic balance between interlaminar strength and toughness remains a critical challenge in the advancement of high-performance fiber-reinforced composites. Inspired by the periodic and aligned microstructures of natural biological materials, this study develops a biomimetic periodic + aligned carbon nanotube (CNT) architecture within the interlaminar resin-rich zones of carbon fiber/epoxy composites via high-frequency alternating electric field-assisted curing. Spatially modulated fields create alternating domains of aligned and randomly dispersed CNTs, forming a bioinspired periodic aligned pattern. Compared to unmodified carbon fiber/epoxy baselines (CFM), the periodic + aligned configuration (CFCI) achieves remarkable simultaneous enhancements of 49.5% in interlaminar shear strength (ILSS), 95.1% in Mode I fracture toughness ( G IC ), and 106.4% in Mode II fracture toughness ( G IIC ). These gains significantly outperform random (CFCR) and fully aligned (CFCA) controls. The strengthening mechanism stems from enhanced interfacial stress transfer and mechanical interlocking, while toughening arises from distributed microcracking, controlled energy dissipation at periodic interfaces, and extensive crack deflection and tortuosity. This integrated biomimetic strategy offers a scalable and versatile approach to decisively overcome the traditional strength–toughness trade-off in structural composites.
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2026
·
IF 2.6
Ruihan Dai,Hongmei Qu,Zhihua Zhang,Yameng Li,Xuesong Zhang,Wenjing Pan
Copper ions are essential for human health but excessive intake can cause severe health issues. Fluorescence detection of copper ions typically relies on small-molecule probes, which suffer from slow reaction kinetics and low sensitivity at low concentrations. In contrast, metal–organic framework (MOF)-based fluorescent probes offer rapid response time and structural tunability, but often have low fluorescence quantum yields. This study presents a novel detection strategy using a functionalized zirconium-based MOF with naphthalimide as the luminescent moiety. A post-synthetic modification (PSM) strategy was used to graft Schiff base recognition units onto the MOF surface, which undergo specific coordination hydrolysis with copper ions, triggering fluorescence quenching. The resulting probe achieves a high fluorescence quantum yield (Φ = 36.88%) and ultra-fast response (<5 s), with a low detection limit (LOD = 0.167 µM) and excellent selectivity. The probe's broad linear detection range was successfully applied to real water samples. X-ray photoelectron spectroscopy (XPS), Gaussian theory calculations, and UV-visible absorption spectroscopy confirmed that the fluorescence quenching is mainly due to suppression of intramolecular charge transfer (ICT). This modular approach can be adapted for the rapid, sensitive detection of various pollutants using MOF-based probes.
✓ 已验证
产品关联
DOI
高影响因子