Materials Today Chemistry
·
2026
·
IF 7.4
Yuan Li,Yao Qian,Haodong Zheng,Ruijing Fu,Yan Chen,Jing Wang
An ultra-broadband green-emitting phosphor K 2 ZnSi 3 O 8 :Eu 2+ with FWHM of 111.8 nm was developed via multi-site occupation of Eu 2+ . • Mg 2+ substitution for Zn 2+ induces local lattice stiffening and defect passivation, boosting PL intensity by 120% . • The optimized phosphor exhibits enhanced thermal stability with increased activation energy (0.261 eV vs. 0.251 eV) and complete intensity recovery after thermal cycling. • A warm WLED fabricated with KZn 0.99 Mg 0.01 SiO 8 :0.01Eu 2+ and commercial red phosphor achieves high color rendering index (Ra = 94.2) and low CCT (3552 K). • This cationic substitution strategy offers an effective route to simultaneously enhance luminescence efficiency, thermal stability, and moisture resistance in rare-earth-doped phosphors. Efficient broadband green-emitting phosphors are essential for human-centric healthy lighting. Herein, an ultra-broadband green-emitting phosphor, K 2 ZnSi 3 O 8 :Eu 2+ , was synthesized by high temperature solid-state reaction method for high-quality white light-emitting diodes (WLEDs). Under ultraviolet excitation, the phosphor exhibits a broad emission band spanning from 400 to 750 nm, peaking at 505 nm with a full width at half maximum (FWHM) of 111.8 nm, which originates from the multi-site occupation of Eu 2+ ions. Moreover, structural engineering via Mg 2+ substitution for Zn 2+ effectively enhances the material's performance. K 2 Zn 0.99 Mg 0.01 Si 3 O 8 :Eu 2+ , shows a 120% increase in emission intensity and improved thermal stability. Finally, a warm WLED fabricated this phosphor with a commercial red phosphor exhibits excellent color rendering index (Ra = 94.2) and a warm correlated color temperature (CCT) of 3552 K, demonstrating its promising application in high-quality healthy solid-state lighting.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2026
·
IF 8.7
Siyu Tong,Shuang Zuo,Guodong Liu,Shiping Wang,Yu Chen,Ping He,Shan Liu
GSH-responsive HPCT enable CT/SDT synergistic therapy. • HPCT induces both ferroptosis and apoptosis. • HPCT actively target CD44-overexpressing tumor cells. • Dual death pathways overcome single-treatment limitations for enhanced efficacy. Cancer is one of the leading causes of death worldwide. Chemotherapy (CT) is one of the main clinical treatment modalities; however, it has limitations as a single treatment approach. To achieve a multi-modal synergistic therapy, this study designed and synthesized two amphiphilic molecules, PEG-SS-CPT and HA-SS-Ce6, and subsequently constructed intelligent nanoparticles HPCT through self-assembly, which possess both active targeting and glutathione (GSH) responsiveness for CT and sonodynamic therapy (SDT). This system employs hyaluronic acid (HA) to specifically target tumor cells that exhibit elevated CD44 expression. It responds to the high levels of GSH present in the tumor microenvironment, allowing for the release of CT drug camptothecin (CPT), while also producing singlet oxygen through Ce6 activation under ultrasound (US) stimulation, thereby simultaneously inducing apoptosis and ferroptosis in tumor cells. In the CT26 colon cancer-bearing mouse model, HPCT combined with US demonstrated a significant synergistic anti-tumor effect, with a tumor growth inhibition rate of 80.4 ± 3.1%, and did not cause significant systemic toxicity. This study indicates that through the rational design of intelligent nanoparticles integrating CT and SDT, it is possible to effectively overcome the limitations of single treatment modalities, providing a new strategy to enhance cancer treatment efficacy.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2026
·
IF 10.6
Qiujie Lu,Chunyu Xiang,Haoyang Wu,Shibin Liu,Gang Liu,Xiaofei Sun,Zhengyu Luo,Bowen Li,Huaiyong Shao
Biochar-based fungal immobilization is widely used to degrade organic contaminants, yet microscale biochemical dynamics governing size-dependent performance of filamentous fungal pellets remain unclear. Here, the microscale distribution of enzyme activity and pH during aniline removal by Phanerochaete chrysosporium immobilized pellets was quantified using in situ zymography and planar optode mapping. After acclimation, conditions of aniline removal by immobilized fungal pellets were optimized using response surface methodology. Among 12 biochars, straw-derived magnetic biochar pyrolyzed at 700°C showed the highest aniline adsorption ( q e = 16.36 mg·g −1 ) and thus was selected as the carrier. Under optimized conditions (24 mL inoculum, 1.2 g biochar, 10 h pre-adsorption, 30°C, pH 6.0), magnetic biochar-immobilized fungal pellets (MB-IFPs) removed 98.99% of aniline in 8 days and retained 74.10% efficiency after five cycles. Comparison of three pellet sizes (1–2, 3–4, and 5–6 mm) revealed size-dependent microenvironmental heterogeneity: the maximum β-glucosidase activity influence radius reaches 26–34 mm after 48 h’ incubation compared to free fungi (about 5 mm). Enzyme activity and pH gradients were the strongest near the pellet core and weakened toward the periphery, with immobilized fungal pellets inducing stronger core acidification than free fungi. Medium-sized pellets (3–4 mm) showed the most favorable early-stage microscale performance, reaching a peak β-glucosidase activity of 2.27 μmol cm −2 h −1 , being 61% higher than free fungi. These findings reveal an inside-out attenuation pattern of biochemical activity in immobilized fungal pellets and identify pellet size as a critical design parameter for optimizing fungal remediation systems.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Environmental Chemical Engineering
·
2026
·Vol. 14
·期 5
·123939
·
IF 7.5
Kai Ma,Huanwen Wang,Huilan Yang,Kehua Xu,Zhiqian Yu,Yongming Chen,Shaogang Chen,Feng He,Longgong Xia
Co-treating zinc hydrometallurgical residues with high Fe, Zn, and Al contents in lead smelting systems poses significant challenges for slag property control, thereby adversely affecting process efficiency and industrial sustainability. In this study, the effects of CaO/SiO 2 mass ratio of 0.2–0.6, ZnO content of 10–30 wt%, and Al 2 O 3 content of 2–10 wt% on viscosity ( η ), activation energy for viscous flow ( E η ), and slag structure for “Fe x O”-SiO 2 -CaO-ZnO-5.5 wt%PbO-Al 2 O 3 system were systematically investigated. Increasing the CaO/SiO 2 mass ratio reduced η and E η at high temperatures because of silicate network depolymerization. At 1573 K, the proportion of monomeric [SiO 4 ] 4- units increased, leading to an increase in the NBO/Si value from 2.22 to 2.91. The slag with a CaO/SiO 2 mass ratio of 0.4 showed the most stable viscous-flow behavior at low temperatures and had the lowest T c (temperature at η = 0.5 Pa·s) of 1426 K. Increasing the ZnO content also reduced η and E η at high temperatures, and the NBO/Si value increased from 2.87 to 3.03 at 1573 K. Opposite trends exhibited at low temperatures due to the enhanced crystallization ability. The T c increased from 1413 K to 1475 K, always meeting the slag temperature range for lead smelting (<1523 K). Al 2 O 3 acted as a network former in the studied slag, without showing amphoteric transition behavior. The NBO/Si value decreased from 3.07 to 2.50 as the Al 2 O 3 content increased. The T c of the slag containing 10 wt% Al 2 O 3 was 1573 K, exceeding the normal slag temperature range for lead smelting.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ENVIRONMENTAL MANAGEMENT
·
2026
·
IF 9.2
Huaying Tang,Haotian Xie,Qiao Kuang,Ying Huang,Fangfang Zhang,Ruirui Yang,Guangbin Ye,Xiang Wang,Yufeng Yang
The valorization of food waste hydrolysate (FWH) for microalgal cultivation presents a promising approach to a circular economy. However, the directed regulation of microalgae-based metabolites synthesized using FWH remains a challenge. To address this issue, this study investigated the influence of photoperiods on the regulation of protein and lipid biosynthesis in Auxenochlorella pyrenoidosa with FWH. As expected, it was found that photoperiod significantly redirected carbon and nitrogen flux, thereby selectively enhancing the accumulation of target metabolites. Specifically, a 16:8 h (light/dark) cycle optimized protein biosynthesis and quality, achieving the high essential amino acid ratio and the amino acid score. Conversely, extended dark periods biased metabolism towards lipids, with an 8:16 h (light/dark) cycle yielding the highest lipid productivity of 157.54 mg/L/d. This regime also significantly improved biodiesel properties, including a cetane number of 51.86 and an oxidation stability of 7.54. Physiological and molecular analyses revealed that dark-induced activation of the antioxidant system, along with the concomitant upregulation of key genes involved in hexose transport, NADPH supply, and TAG assembly, underpinned efficient lipid biosynthesis. Overall, the findings demonstrate that photoperiod control is an effective strategy for orchestrating the production of high-quality proteins or lipids from A. pyrenoidosa in FWH, advancing the development of sustainable microalgae-based biorefineries.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.7
Zeyuan Li,Yuze Jiao,Huang Lin,Qianhong Shen,Xinglei Zhao,Peng Wang,Qilong Zhang
Traditional zirconia (ZrO 2 ) fibers suffer from severe limitations in mechanical performance under extreme conditions due to high-temperature phase transformation-induced cracking, abnormal grain growth, and inherent brittleness, making it difficult to meet the stringent requirements of fields such as aerospace and energy systems. This work proposes an innovative fabrication strategy that successfully achieves in-situ growth of an amorphous carbon coating layer on the surface of Al/Y co-doped ZrO 2 nanofibers through electrospinning and hot-stretching processes. In this work, zirconium acetate acts as both zirconium source and solvent, simplifying precursor preparation. The hot-stretching process utilizes the micropores on the fiber surface to form an in-situ amorphous carbon layer, which significantly enhances the mechanical properties of the fibers: tensile strength reaches 8.08 MPa, and the fiber membrane maintains structural integrity after 500 bending cycles at 80% strain, demonstrating excellent fatigue resistance and elastic recovery capability; it also exhibits outstanding thermal shock resistance at extremely low (-196°C) and ultra-high (1350°C) temperatures. Through the key innovation of introducing an amorphous carbon layer via hot-stretching, this work successfully integrates high strength, superior flexibility, and outstanding fatigue resistance into ZrO 2 fibers. Furthermore, owing to its high porosity (92%), the fiber membrane exhibits ultra-low thermal conductivity and effective sound absorption. Ultimately, this provides a reliable solution for multifunctional ceramic fiber materials applied in high-temperature environments (up to 800°C).
✓ 已验证
产品关联
DOI
高影响因子
DESALINATION
·
2026
·
IF 9.9
Zhongsen Yan,Zeqi Yan,Sufen Lin,Haiqing Chang,Kaiqin Xu,Gongduan Fan,Fangshu Qu
Novel CMCS sacrificial layer enhances silica scaling resistance in MD. • CMCS coatings can be removed and re-coated in situ. • Synergy of CMCS layer and smooth PVA substrate boosts silica scaling resistance. • CMCS-PVA membrane showed sustainable anti-silica performance in long-term tests. Membrane distillation (MD) is a promising technology for hypersaline wastewater treatment, yet it is often limited by severe silica scaling. This study proposes a carboxymethyl chitosan (CMCS) sacrificial layer strategy to achieve in situ silica scale removal and restore membrane reusability for MD. The influence of substrate properties on anti-scaling performance was systematically evaluated by depositing the CMCS layer onto Thin Film Composite (TFC) and Polyvinyl Alcohol (PVA) Janus membranes. Characterization results indicated that the CMCS coating significantly improved surface smoothness and introduced silica-resistant functional groups, reducing the average roughness (Ra) of the TFC and PVA membranes from 74.2 to 2.79 nm and from 8.26 to 1.19 nm, respectively. After a single-cycle silica scaling test, the CMCS-TFC and CMCS-PVA membranes retained 92.7% and 97.2% of their initial specific flux, respectively, 26.2 and 2.1 percentage points higher than their pristine counterparts. Notably, the CMCS-modified PVA membrane exhibited superior anti-scaling stability, maintaining a specific flux above 90% for the first 4 cycles and achieving a flux recovery ratio (FRR) exceeding 99% across all cleaning cycles. This synergistic effect between the CMCS sacrificial layer and the smooth PVA substrate effectively inhibited silica penetration, while enabling interfacial renewal and foulant removal via in situ exfoliation and re-deposition of the CMCS layer. This work provides a facile and robust approach for treating silica-rich hypersaline streams. Download: Download high-res image (137KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2026
·
IF 10.4
Ming Zhang,Bin Wang,Ishtiaq Ahmad,Jifang Miao,Shiguo Chen,Xingqian Ye
Chemical and flavor characteristics of Lingmu tea were systematically analyzed. • Processing reshaped aroma via redistribution of key odor-active compounds. • Taste profile changed with amino acids, organic acids, and polyphenols. • Antioxidant mechanism shifted from radical scavenging to reducing capacity. Lingmu tea is a traditional non- Camellia beverage, yet its chemical basis and processing-induced changes remain unclear. This study investigated the effects of processing on its composition, flavor, and antioxidant properties using metabolomic and sensory analyses. Processing significantly reduced free amino acids and flavan-3-ols such as epigallocatechin, while increasing complex polyphenols including terchebin and trigalloyllevoglucosan. Organic acids such as gallic acid and lactic acid also increased. Volatile analysis based on relative odor activity values showed that linalool (ROAV = 100) was the dominant aroma contributor in fresh leaves, whereas 1-octen-3-one (ROAV = 100) and dimethyl sulfide (ROAV = 61.75) showed higher contributions after processing. Notably, antioxidant activity exhibited a mechanistic shift from rapid radical scavenging to enhanced overall reducing capacity. These findings provide insights into the compositional and functional transformation of Lingmu tea during processing. Download: Download high-res image (139KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
PubMed
高影响因子
OPTICS AND LASER TECHNOLOGY
·
2026
·
IF 5.2
Wei Gao,Jiaxi Li,Junlin Qi,Qingyan Han,Chengyun Zhang,Xuewen Yan,Jun Dong
Balancing red-emission intensity and the red-to-green (R/G) emission ratio remains an important challenge in Er 3+ -based upconversion nanoparticles. Herein, a multilayer core–shell architecture was developed to achieve differential regulation of red-emission intensity and the red-to-green (R/G) emission ratio in Er 3+ -based upconversion nanoparticles. After screening NaYbF 4 : x %Er 3+ @NaYF 4 core–shell nanoparticles, the sample containing 2% Er 3+ exhibited a favorable balance between overall emission intensity and the R/G ratio and was therefore selected as the precursor for constructing NaYbF 4 :2%Er 3+ @NaYF 4 @NaErF 4 :y%M 3+ @NaYF 4 (M = Yb or Tm) multilayer nanoparticles. In this architecture, the Yb-rich core, intermediate NaYF 4 layer, compositionally tunable Er-rich shell, and outer NaYF 4 shell were designed to provide spatially differentiated excitation harvesting, interfacial modulation, spectral regulation, and surface passivation, respectively. Under identical 980 nm excitation and collection conditions, incorporation of 15%Yb 3+ into the Er-rich shell increased the integrated red-emission intensity to 2.40 times that of the undoped multilayer counterpart, whereas incorporation of 0.5%Tm 3+ produced the highest R/G ratio of 17.1 while retaining comparatively strong emission. Power-dependent and time-resolved luminescence measurements, together with the proposed energy-transfer model, indicate that Yb 3+ incorporation is predominantly associated with enhanced local excitation sensitization and energy utilization within the Er-rich region, whereas trace Tm 3+ incorporation is more closely associated with excited-state population redistribution toward the red-emitting pathway. These results demonstrate that red-emission intensity and the R/G ratio can be differentially regulated within the same multilayer platform through Yb 3+ or Tm 3+ incorporation into the Er-rich shell. This work provides a spatially organized and compositionally tunable strategy for tailoring red upconversion emission in Er 3+ -based multilayer nanoparticles.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ENVIRONMENTAL MANAGEMENT
·
2026
·
IF 9.2
Jingwen Zhang,Xiaowen Liu,Zhongkun Du,Bing Li,Jun Wang,Jinhua Wang,Lusheng Zhu
The widespread application and residual accumulation of polyethylene (PE) agricultural films in saline soils have contributed to the co-occurrence of PE particles and plasticizers such as di-(2-ethylhexyl) phthalate (DEHP). Although the environmental presence of these agricultural film components is recognized, their combined ecological risks and the subsequent management challenges they pose remain poorly understood. The present study evaluated the comprehensive toxicity effects and ecotoxicological risk implications of DEHP alone and in co-exposure with PE on earthworms within a salinized soil environment using a multi-biomarker evaluation approach. The results revealed that both treatments induced oxidative stress, DNA damage, tissue damage, and molecular responses potentially linked to growth and reproduction. Notably, DEHP + PE co-exposure induced stronger comprehensive toxicity effects than DEHP alone in a concentration-dependent manner under the tested salinized soil conditions. To elucidate the underlying pathways and identify potential early-warning indicators for soil monitoring, transcriptomics and molecular docking were employed. Transcriptomic profiling indicated that solitary DEHP exposure primarily disrupted digestive metabolism and cellular processes. In contrast, co-exposure to DEHP and PE significantly impaired neural and vascular development pathways. Molecular docking analysis further supported these findings by illustrating the specific binding interactions of DEHP with key target proteins. Ultimately, the current study integrates multi-level biological evidence to support ecotoxicological risk evaluation of DEHP and DEHP + PE co-exposure, offering potential implications for future ecological risk assessment, soil monitoring, and sustainable management of agricultural plastic residues in saline ecosystems.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Environmental Sciences
·
2026
·
IF 6.5
Hongxin Liu,Kuiling Li,Lin Fang,Yang Yao,Zhigang Dan,Jun Wang
A heterogeneous electro-Fenton membrane distillation system is developed;. • Interfacial ·OH generation suppresses vapor-phase transfer of VOCs;. • High-salinity wastewater can be concentrated with controlled organic risk. High-salinity coal-chemical wastewater is challenging to manage because thermal concentration reduces wastewater volume but may simultaneously promote the carryover of volatile organics into the distillate and the enrichment of organics in the concentrating brine, thereby amplifying downstream risks. Here we develop a heterogeneous electro-Fenton membrane distillation (HEF-MD) process by integrating a Fe 3 O 4 -loaded membrane-based gas diffusion electrode (Fe 3 O 4 /Mem-GDE). This design couples oxygen delivery, in situ H 2 O 2 electro-generation, and surface-confined Fenton activation at the membrane-solution interface to establish an interfacial “reactive barrier”. Consequently, HEF-MD effectively suppresses vapor-phase transfer of representative volatile phenolics, achieving high rejection under conditions where conventional sweeping-gas MD exhibits low rejection or even enrichment of these compounds in the permeate. When applied to two real coal-chemical wastewaters, HEF-MD maintains stable vapor transport and high salt rejection while substantially improving distillate organic quality and mitigating organic build-up in the concentration brine, supporting a zero-liquid discharge operation. The system operates without chemical dosing or pH adjustment; when waste heat is available to drive MD, the incremental operating cost is dominated by electricity. Overall, these findings position HEF-MD as a practical, risk-controlled concentration strategy that couples desalination with in situ interfacial oxidation to suppress organic transfer, mitigate organic enrichment, and enable sustainable management of high-salinity industrial wastewaters. Download: Download high-res image (274KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Shijun Xu,Haitao Ji,Han Liu,Liangjun Li,Jianxiu Hu,Lingnan Kong,Xiangshan Hou,Qing Yuan,Yi Sun,Mier Bai,Yi He
Passive thermal management coatings are pivotal for energy efficiency; however, their practical implementation is often hampered by the inherent porosity of insulating fillers, which compromises barrier integrity and renders substrates vulnerable to environmental corrosion. This study aims to develop an epoxy-based passive cooling coating that decouples the highly porous internal structure from surface permeability. By utilizing a water-induced phase inversion (WIPI) process to form an asymmetric single-layer structure, the coating simultaneously integrates thermal insulation, broadband solar reflection, mid-infrared emission, and environmental barrier protection. By incorporating superhydrophobic silica aerogel into the microporous epoxy matrix, a synergistic multiscale pore network was established, integrating microvoids (∼960 nm) with aerogel-derived nanopores (∼50 nm). The combined effect of macroscopic gas insulation within micropores and the Knudsen effect in aerogel nanopores suppresses heat conduction. Meanwhile, the multiscale air/polymer/silica interfaces enhanced broadband solar scattering, yielding a total solar reflectance of 88.3%, including 93.2% in the visible region and 85.1% in the near-infrared region. The coating also exhibited a high weighted thermal emissivity of 95.78% in the 8–13 μm atmospheric window, providing favorable optical properties for passive daytime cooling. Electrochemical impedance spectroscopy (EIS) indicated that the aerogel-modified porous coating partially recovered the barrier performance lost by pore formation, showing improved corrosion resistance compared with the porous epoxy coating without aerogel. Outdoor box tests in Chengdu demonstrated a maximum internal temperature reduction of 7.5 °C relative to ambient air. In addition, EnergyPlus simulations suggested that applying the optimized coating to building envelopes could reduce cooling energy demand in different Chinese climate zones, with relative savings of up to 23.4% under radiation-dominated conditions. These results demonstrate that the as-prepared coating offers a feasible strategy for epoxy-based coatings integrating thermal insulation, solar reflection, mid-infrared emission, and enhanced environmental barrier performance. Download: Download high-res image (174KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
PubMed
高影响因子