Journal of Energy Chemistry
·
2026
·
IF 15.6
Kun Shi,Chenyin Peng,Xueling Cheng,Tingting Xu,Zeheng Yang,Weixin Zhang
A long-standing trade-off between fire safety and electrochemical performance in lithium-ion batteries arises from aggressive parasitic reactions between highly reactive flame retardants and electrodes. Herein, a phosphorus-fixed gel polymer electrolyte is constructed by covalently integrating 9,10-dihydro-9-oxa-10-phosphaphenanthrene 10-oxide (DOPO) into a vinylene carbonate-pentaerythritol tetraacrylate copolymer network through phosphorus-hydrogen addition. Covalent fixation confines DOPO within the gel matrix, delivering intrinsic flame retardancy while circumventing detrimental phosphorus-related side reactions. The abundant polar O=P–-O moieties in DOPO not only promote lithium salt dissociation and provide additional coordination sites to facilitate rapid Li + transport, but also actively reshape the Li + solvation environment. Specifically, the DOPO-incorporated polymer tethers solvent molecules and restricts their entry into the primary coordination sheath, shifting the solvation equilibrium toward an anion‑dominated configuration. This solvation reconfiguration fosters LiF‑rich robust interphases on both electrodes, ensuring stable lithium deposition and exceptional oxidative stability. As a result, the as -prepared electrolyte achieves outstanding compatibility exceeding 3500 h against lithium anode, significantly enhanced cycling stability in LiFePO 4 , high-voltage LiNi 0.8 Co 0.1 Mn 0.1 O 2 and LiNi 0.9 Co 0.05 Mn 0.05 O 2 -based full cells, as well as remarkable tolerance to flame, physical damage, and high-temperature operation. This work establishes a new paradigm for high-safety lithium-ion batteries, where phosphorus-based solvation engineering secures durable electrode interfaces under demanding conditions. The safety-performance trade-off in lithium-ion batteries is overcome by covalently fixing phosphorus-containing flame retardants into a gel polymer electrolyte, which reshapes Li + solvation to form durable LiF-rich interphases for uniform Li deposition and high-voltage stability. Download: Download high-res image (117KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Chang-quan Li,Kuan-kuan Li,Xiao-feng Zeng,Xi Long,Peng-zhao Gao,Xin-lin Ren,Jian-li Wang,Hui-ying Tang,Hang Qin,Han-ning Xiao
This study systematically investigates the effect of heat-treatment temperature (600-1200 °C) in air on the oxidation behavior, lattice oxygen migration, and thermal and mechanical properties of AlN ceramics. The results show that when the heat-treatment temperature is ≤ 800 °C, no detectable oxide layer forms on the surface of AlN ceramics; however, lattice oxygen begins to diffuse toward grain boundaries. At 1000 °C, a continuous and dense Al 2 O 3 layer (∼2.55 μm) forms on the surface. The thermal expansion mismatch between this oxide layer and the AlN matrix induces a residual compressive stress (-749.78 MPa) in the AlN substrate. Concurrently, XPS, EDS line scanning, and hot-gas extraction collectively confirm that lattice oxygen has sufficiently migrated to grain boundary regions. The resulting lattice purification reduces phonon scattering centers, while the residual compressive stress lowers interfacial thermal resistance at grain boundaries and suppresses crack propagation. These two mechanisms act synergistically, leading to the highest flexural strength (451.48 MPa) and thermal conductivity (211.73 W·m -1 ·K -1 ) among all samples. When the temperature is further increased to 1200 °C, the oxide layer thickens sharply to approximately 30.95 μm. Cracks and pores develop due to the thermal expansion mismatch, causing a marked decrease in both thermal conductivity and flexural strength. Finally, a kinetic equation for predicting the oxide layer thickness on AlN ceramics is established based on the Hou-Chou kinetic model. A comprehensive model describing lattice oxygen migration and oxidation behavior during heat treatment is also constructed. This work provides a theoretical basis for optimizing the heat-treatment process and enhancing the performance of AlN ceramics.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2026
·
IF 4.6
Jiaqi Wang,Yuhan Xia,Kaiyu Chen,Hongyu Wang
This work integrates heterostructure construction, sulfur vacancy engineering, and mesoporous structure regulation into nickel sulfide-based electrode material. • A NiS/Ni 3 S 4 heterojunction with rich sulfur vacancies and a mesoporous nanosphere morphology was synthesized. • The assembled asymmetric supercapacitor (ASC) achieves a high energy density of 52.22 Wh kg −1 at 768.91 W kg −1 . Herein, NiS/Ni 3 S 4 (NS) heterojunction electrodes with abundant sulfur vacancies and a mesoporous structure were synthesized via a synergistic strategy of heterostructure construction, sulfur vacancy engineering, and mesostructure design. The built-in electric field at the heterojunction interface accelerates charge carrier transport. Rich sulfur vacancies endow the material with more electroactive sites and an optimized electronic configuration, further improving electrical conductivity. The mesoporous framework enlarges the electrolyte-electrode contact area, boosts ion diffusion kinetics, and provides buffer space to accommodate volume changes during cycling. Benefiting from the above synergistic advantages, the rich sulfur vacancy-mesoporous nickel sulfide heterojunctions (NS 8/3 –350) electrode delivers a high specific capacitance of 2548 F g −1 at 1 A g −1 , and maintains 81.01% capacitance retention after 5000 cycles at 30 mA cm −2 . An asymmetric supercapacitor (ASC) was assembled using NS 8/3 –350 as the cathode and activated carbon (AC) as the anode. The fabricated NS 8/3 –350//NF@AC ASC achieves a wide voltage window of 1.6 V and a maximum energy density of 52.22 Wh kg −1 at 768.91 W kg −1 , showing promising application potential. This work provides an effective strategy for the rational design of high-performance nickel sulfide-based electrode materials for supercapacitors.
✓ 已验证
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Xiaosai Hu,Haoqi Liu,Jinsong Chen,Haoran Cao,Feifei You,Jian Qi
A robust polyacrylamide hydrogel is fabricated using only two raw materials. • The vinyl-functionalized polyethyleneimine acts as a dual-functional photoinitiator and cross-linker. • The hydrogel achieves a 15-fold strain elongation and 176 kPa tensile strength. Robust polyacrylamide (PAM) hydrogels have garnered significant attention due to their diverse applications. However, developing a streamlined synthesis strategy for mechanically robust PAM hydrogels using a simplified component system remains a challenge. In this study, we report an innovative strategy to fabricate high-performance PAM hydrogels using only two raw materials: acrylamide (AM) monomer and dual-functional vinyl-functionalized polyethyleneimine (VPEI). Uniquely, VPEI serves simultaneously as both a photoinitiator and a cross-linker via a synergistic mechanism, enabling polymerization and network formation under UV irradiation without additional additives. This approach significantly simplifies the fabrication process compared to conventional multi-component systems. The resulting PAM hydrogels exhibit exceptional mechanical properties, achieving a fracture elongation of 15-fold and a tensile strength of 176 kPa. Moreover, they demonstrate excellent fatigue resistance and self-recovery capabilities, maintaining stable mechanical integrity over repeated loading-unloading cycles (100%-500% strain). This work presents an efficient pathway for designing high-performance hydrogels with broad potential in advanced applications. Download: Download high-res image (183KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
POLYMER
·
2026
·
IF 5.1
Wanying Zhang,Yongjian Zhu,Yiyong Chen,Chengbin Zou,Feng Dou,Dezhi Zhan,Hao Zhong,Jinru Li,Shilong Zhong,Rui Chen,Yanyu Gao,Cheng Wang,Xudong Chen
Polyimides are widely used in the manufacture of flexible copper-clad laminates because of their excellent thermal stability, mechanical properties, and solvent resistance. However, copper-clad laminates based on fully aromatic polyimide substrates suffer from electronic signal propagation delay and signal loss during operation, issues that become particularly pronounced under high-frequency signal transmission. Additionally, the traditional subtractive process used to fabricate copper-clad circuits on polyimide film surfaces has significant drawbacks, including high energy consumption and environmental pollution. Therefore, developing low-dielectric polyimides and additive manufacturing methods for flexible copper-clad laminates remains a major challenge. Here, controllable regulation of segment sequence structure and segment length in silicon-oxygen polyimide was achieved through a stepwise polymerization strategy. The resulting block polyimide exhibits excellent comprehensive performance, with a dielectric constant as low as 2.76 and an initial thermal decomposition temperature of 489 °C. By combining laser direct writing with additive patterning, controllable copper metallization based on a silver seed layer was successfully achieved on the surface of the block polyimide films. The copper wires, composed of cubic-phase copper nanoparticles with grain sizes of 70-90 nm, display high-resolution edge definition and excellent mechanical stability. This synergistic approach, integrating controllable polymer synthesis with surface metal patterning, provides an effective alternative method for manufacturing high-performance flexible electronic devices.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2026
·
IF 9.2
Fuyan Kang,Chengfang Wang,Liquan Jing,Hongwei Ma,Zhanhua Huang
Low charge utilization efficiency and the inherent recalcitrance of raw biomass hinder the sustainable use of these resources. Here, Ni@C/ZCS was designed to enable the sustainable production of hydrogen from raw biomass. Ni@C/ZCS exhibits excellent performance in the photorefining of raw biomass (hydrogen production rate: 8.34 mmol g −1 h −1 , organic acid production rate: 3.37 mmol g −1 h −1 ). Ni@C acts as an electron pump, effectively separating photogenerated carriers and enabling the efficient utilization of photogenerated electrons and photoinduced holes. Mechanistic studies reveal that ·O 2 − and ·OH are the primary photoactive radicals in the photorefining of primary biomass. In sustainability research, photorefining has demonstrated greater sustainability than traditional biomass conversion technologies and holds the potential for profitability. This research will expand the possibilities for the sustainable conversion of primary biomass while promoting the continuous production of renewable hydrogen.
✓ 已验证
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2026
·
IF 13.2
Yu Chen,Shujing Wang,Xiran Zhou,Yu Cheng,Jiahao Liang,Shengjun Cheng,Dongmei Tong,Hongyu Xiang,Xianda Liu,Tinghang Yang,Yupei Li,Weifeng Zhao,Changsheng Zhao
Circulating histones are critical inflammatory mediators that drive hyperinflammation and organ failure in critical illnesses such as sepsis, acute kidney injury, and acute respiratory distress syndrome. Their plasma levels are significantly correlated with disease severity and mortality in such patients. Although both DNA and sulfonic acid-containing macromolecules bind histones via electrostatic interactions, the primary challenge in integrating these antagonists into a unified anti-histone system lies in their mutual water solubility and similar negative charges. Herein, we fabricate novel chitosan/DNA-poly(sodium-4-styrenesulfonate) porous microspheres (C3D1-PSS) by employing a stepwise strategy involving phase inversion and subsequent in situ crosslinking polymerization. With a high-density, negatively charged histone capture network, the C3D1-PSS microspheres exhibit excellent hemocompatibility and achieve a notable histone adsorption ratio of 86.47% within 2 h and 95.52% within 4 h through synergistic electrostatic interactions mediated by phosphate and sulfonate groups in vitro. Furthermore, the C3D1-PSS microspheres significantly mitigate histone-induced thrombocytopenia, platelet activation, hemolysis, cytokine release, and endothelial cell death. In a histone-induced rabbit sepsis model, the C3D1-PSS microspheres efficiently alleviate histone-induced thrombocytopenia, tissue damage, hyperinflammation, and cell apoptosis. Collectively, this work presents a promising adsorbent for extracorporeal removal of histones and holds potential for managing histone-associated critical illnesses.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF POWER SOURCES
·
2026
·
IF 8.4
Fangyu Meng,Ziheng Liu,Daxin Shi,Yaoyuan Zhang,Kangcheng Chen,Qin Wu,Hansheng Li
Homogeneous and transparent proton exchange membranes (PEMs) denoted as HBPPQ/PPQ-x are fabricated via in situ combination of hyperbranched polyphenylquinoxaline (HBPPQ) and linear polyphenylquinoxaline (PPQ). The rigid hyperbranched structure generates stable nanocavities, giving HBPPQ/PPQ-50 high fractional free volume (FFV) of 37%. Moderate main-chain basicity provides favorable phosphoric acid (PA) affinity, leading to the PA uptake of 334%. HBPPQ/PPQ-x membranes exhibit pronounced anisotropic swelling and proton conduction behavior. HBPPQ/PPQ-50 delivers the σ ⊥ of 76 mS cm −1 at 180 °C, 3.1 times the in-plane conductivity ( σ // ). It shows an open-circuit voltage of 1.004 V, higher than commercial PBI (0.977 V), and maximum power density of 1122 mW cm −2 , twice that of PBI at 180 °C without back pressure. No obvious voltage decay is observed during 200 h durability test at 160 °C and 0.2 A cm −2 . These results demonstrate that constructing high free volume hyperbranched/linear composite membranes is an effective strategy to simultaneously enhance PA uptake, proton conduction, and HT-PEMFC performance.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Xue Chen,Yucao Yuan,Mingliang Li,Bo Song,Hailiang Wang,Gang Shao,Hongxia Lu,Hailong Wang,Bing Zhang,Hongliang Xu
Fe 2 O 3 /HNTs composites were prepared by a facile and economical sol-gel method. • Photocatalytic activity of Fe 2 O 3 was greatly enhanced by loading on HNTs surface. • Synergy effect of photocatalysis and PDS activation enhanced TC degradation. • 50 mg FH-40 removed 94.80% of TC molecules within 120 min in Vis/PDS system. • The potential synergistic enhancement mechanism was well proposed. Through loading Fe 2 O 3 on the surface of halloysite nanotube (HNTs), Fe 2 O 3 /HNTs composites (FH-X, X = 10, 30, 40, 50, 70, representing the mass of Fe 2 O 3 in the composite as 10 wt%, 30 wt%, 40 wt%, 50 wt% and 70 wt%), were successfully fabricated via sol-gel method. The effects of Fe 2 O 3 content on the morphology, microstructure, photoelectric and photocatalytic performance of the FH-X composites were systematically investigated. The results indicated that the agglomeration of Fe 2 O 3 nanoparticles was effectively alleviated, which were uniformly distributed on the surface of HNTs and decreased to around 5–15 nm in size. Consequently, FH-X composites exhibited superior adsorption and photocatalytic performance toward tetracycline hydrochloride (TC). With the increase of Fe 2 O 3 content, the degradation of TC by the FH-X composites firstly increased and then decreased. Among them, FH-40 exhibited the optimal photocatalytic performance, which was likely due to the interfacial effect between Fe 2 O 3 and HNTs. The sodium peroxydisulfate (PDS) was used as the auxiliary agent, 0.05 g of FH-40 removed 94.80% of TC (100 mL, 40 mg/L) under visible light irradiation for 120 min in the Vis/PDS system. The reaction rate constant was 4.18 times that of Vis/FH-4. The effects of the PDS and photocatalyst dosage, pH value and initial concentration of TC on the removal rate of TC were also investigated. Additionally, FH-40 exhibited favorable stability, and excellent universality for degrading other organic pollutants. ·SO 4 ⁻ , h ⁺ and ·O 2 ⁻ were the dominant active species during the photocatalysis. The possible degradation pathway and mechanism of TC were proposed. Download: Download high-res image (187KB) Download: Download full-size image Mechanism of TC degradation by FH-40 in Vis/PDS system
✓ 已验证
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Weiwei Huang,Yuning Zhang,Quan Yuan,Hang Yang,Weiwei Lv,Wenzong Zhou
Understanding membrane fouling mechanisms, particularly the pretreatment-mediated fouling mitigation mechanism, is critical for controlling algal fouling. This study examined the fouling control mechanism of extracellular organic matter (EOM) by combined heat-activated potassium peroxymonosulfate (PMS) and polyaluminum chloride (PACl) treatment using extended Derjaguin-Landau-Verwey-Overbeek (XDLVO)-based interaction energy analysis. Results showed that combined PMS and PACl treatment effectively mitigated membrane fouling, with the fouling control performance being highly dependent on PACl dosage. PACl 5 mg/L under combined PMS treatment worsened membrane fouling, while PACl dosages 10 – 40 mg/L alleviated it, with the best performance achieved at 40 mg/L. XDLVO theory analysis revealed that PMS-PACl (10 – 40 mg/L) treatment enhanced repulsive membrane-foulant interactions and transformed membrane-foulants and foulants-foulants interactions from attractive to repulsive. Moreover, both membrane-foulant and foulant-foulant repulsive interactions increased with increasing PACl dosage. In contrast, although integrated PMS and PACl 5 mg/L weakened foulant-foulant attractive interaction than control EOM, serious membrane fouling was still observed, likely due to stronger attractive membrane-foulant interactions during the initial filtration stage. This research offers new mechanistic insights into fouling control and provides a theoretical basis for algal-laden water treatment. Download: Download high-res image (209KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
POLYMER
·
2026
·
IF 5.1
Yun-Zhu Xing,Ting Pan,Yu Han,Wei-Shi Zheng,Chun-Guang Liu
Keggin-type phosphotungstic acid (PTA) has attracted considerable attention in the field of proton exchange membrane (PEM) fuel cells because it possesses the highest known proton conductivity. However, the interaction between PTA and hydronium ions, as well as the dynamic network formed by PTA units, has not been investigated in detail. Herein, we developed a series of PTA/cellulose composite membranes for use in PEMs. The highest proton conductivity of the PTA/cellulose PEM is 6.96 × 10 −2 S/cm at 25 °C and 100% relative humidity, which is about 430 times as high as that of the cellulose composite membrane without PTA. Fourier transform infrared (FTIR) spectroscopy and density functional theory (DFT) calculations show that the interaction between the PTA anion and the cellulose molecular chain arises from intermolecular hydrogen bonds. Such a structural arrangement endows the composite membrane with good interfacial compatibility, thermal stability (decomposition temperature >400 °C), and hydrophilicity. A detailed analysis of the relationship between proton conductivity and PTA content in the PTA/cellulose composite membranes shows that the proton-transfer pathway shifts from the vehicle mechanism to the Grotthuss mechanism as the PTA content increases. DFT calculations show that hydronium ions can bind to the fourfold hollow sites of the PTA anion via hydrogen-bonding interactions, which may form the core structure of the ionic atmosphere in the vehicle mechanism. The hydrogen-bond network in the Grotthuss pathway can be formed via an effective combination of steric effects of PTA units and hydrogen-bonding interactions between PTA and hydronium ions.
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2026
·
IF 10.4
Haitong Wang,Cunxiang Bo,Bingxin Xu,Yu Liu,Mengping Zhang,Xinyuan Zhao,Liqun Song,Hua Shao,Cuijuan Wang
•AuNPs-modified COF on a portable 25-well plate for testing DIF and FLU residues. • •Integration of adsorption and SERS functions for streamlined analyses. • • Portable, on-site detection system enabling field-ready pesticide monitoring. • • Ready-to-use, pretreatment-free SERS assay delivering real-time results. We developed a ready-to-use surface-enhanced Raman scattering (SERS) sensor for rapid, pretreatment-free detection of difenoconazole (DIF) and flusilazole (FLU) in peach and lychee juices. The substrate combines Au nanoparticles (AuNPs) with covalent organic frameworks (COF) and is implemented on a portable 25-well plate, enabling in situ testing. Juices can be directly applied to the SERS-active Au/COF composite, allowing simultaneous adsorption and signal generation. The correlation between SERS intensity and logarithmic concentration yielded R-values between 0.925 and 0.986, meeting the monitoring needs of non-laboratory scenarios. The entire workflow completes within 12 min, offering a faster alternative to conventional methods while maintaining high sensitivity and reproducibility. Detection limits reach 0.96–1.22 ppb for DIF and FLU, both of which are below the regulatory maximum residue limits. Distinct SERS fingerprints enable reliable discrimination of mixed residues across juice matrices, supporting rapid on-site monitoring and cost-effective pesticide surveillance. Download: Download high-res image (233KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
PubMed
高影响因子