ACS Nano
·
2026
·
IF 17.3
Xunzhi Wu,Huixu Lu,Yexi Peng,Mingze Xu,Yuming Qi,Yuhan Yi,Yuanqing Song,Xiaoxian Wang,Yazhe Liang,Tiankai Chen,Xingya Jiang,Bujie Du
Diabetic nephropathy (DN) has become a global health burden associated with high morbidity and mortality. Quantitative staging of DN is crucial for its timely and stage-matched therapeutic intervention. Given that glomerular dysfunction is the pathological hallmark of DN progression, the glomerular filtration rate (GFR) is the most comprehensive indicator of DN. However, estimated GFR derived from endogenous serum creatinine is inaccurate for precise staging of DN. To address this issue, we developed an exogenous gold-based artificial filtration biomarker (Gold-AFB), realizing accurate measurement of GFR alteration during DN progression through computed tomography (CT) imaging or simple blood testing. The Gold-AFB comprised an ultrasmall gold core and a strongly antifouling phosphatidylcholine shell, which enabled its rapid and free glomerular filtration (>90%@2 h, ∼100%@24 h) without tubular interactions. Leveraging the high X-ray attenuation properties of Gold-AFB, we achieved accurate quantification of GFR via rapid renal CT imaging and realized the differentiation of three DN stages, covering phases from glomerular hyperfiltration to mild and severe glomerulosclerosis, which were hardly distinguished by endogenous biomarkers. Furthermore, we also established a blood-based assay using Gold-AFB, realizing a convenient GFR report in murine and rabbit models at a 100-fold lower dose than FITC-inulin, the current “gold” standard for GFR measurement.
✓ 已验证
DOI
PubMed
高影响因子
ACS Nano
·
2026
·
IF 17.3
Jianying Ye,Yan Zhao,Baoyue Zhang,Shuo Li,Jinbo Li,Jiang Yu,Hongzhuo Liu,Yongjun Wang
In situ cancer nanovaccines harness endogenous tumor-associated antigens (TAAs) to address tumor heterogeneity, yet their efficacy is limited by rapid antigen degradation and inefficient lysosomal cross-presentation. Here, we design gallic acid-derived polyphenolic lipids to construct antigen-capturing liposomes (L-GA/INC/PPa) that exploit natural protein-binding properties for enhanced antigen preservation. Compared with covalent maleimide conjugation, noncovalent galloyl groups captured a broader spectrum and higher quantities of tumor antigens. When combined with photodynamic therapy (PDT), L-GA/INC/PPa markedly improved antigen capture, dendritic cell activation, and effector T cell infiltration in melanoma models. Furthermore, PDT-induced tumor hypoxia activated an indoleamine 2,3-dioxygenase-1 (IDO-1) inhibitor prodrug, directly mitigating regulatory T cell expansion triggered by immunogenic cell death. By integration of broad-spectrum antigen presentation with hypoxia-responsive immunosuppression reversal, this dual-modality nanovaccine achieved potent suppression of both primary and distant tumors.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
WATER AIR AND SOIL POLLUTION
·
2026
·Vol. 237
·期 10
·581
·
IF 3.5
Li Zhen,Tang Lian,Tang Min,Zhan Peng,Ouyang Ke,Wu Zhiping
In this paper, a biochar was prepared through hydrothermal carbonization, followed by activation with KOH and pyrolysis, using waste bamboo powder as the feedstock. The efficiency of the KOH-activated bamboo biochar (KBB) as an adsorbent for the antibiotic levofloxacin (LEV) was studied. Results indicated that the maximum specific surface area, mesoporous specific surface area, and total pore volume of KBB sample, designated as HK-80-BC-800–1.5, was obtained under the conditions of 80 g/L KOH, 800 °C pyrolysis temperature, and 1.5 h residence time, holding a LEV adsorption capacity of 178.0 mg/g. Following optimization of the adsorption process, a corresponding Langmuir adsorption maximum of 277.0 mg/g for LEV was simulated under the conditions of 20 mg/L initial LEV, 10 mg adsorbent, and pH 7.0. Besides, the adsorption mechanisms were determined by analyzing the adsorption kinetics and adsorption isotherms and characterizing the samples before and after adsorption. The findings suggest that pore filling, hydrophobic interaction, and hydrogen bonding force are crucial in the adsorption of LEV by KBB. Graphical
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2026
·Vol. 37
·期 5
·402
·
IF 3.2
Li Jing,Su Yuchang,Wang Jionghui,Zhang Jing,Zhu Yinyin
As lithium-ion batteries and electronic devices proliferate rapidly, recycling spent batteries and developing advanced electromagnetic microwave absorbers have become increasingly crucial. Upcycling spent graphite anodes into high-performance microwave-absorbing materials provides a value-added pathway for graphite resource reutilization while mitigating electromagnetic pollution. In this study, spent graphite anode waste was directly upcycled to construct PSG@Co (Pre-treated Spent Graphite @ Cobalt) composites via a liquid-phase impregnation followed by a carbothermal reduction process. The cobalt loading and morphology of PSG@Co composites were readily tuned by adjusting the concentration of the cobalt precursor solution, thereby further altering microwave absorption performance. Benefiting from the retained bulk graphitic structure and abundant defective sites of the pre-treated spent graphite, the composites exhibited excellent conductive loss and defect polarization. Moreover, cobalt incorporation significantly improved interfacial polarization, magnetic loss, and impedance matching. Under an optimal cobalt precursor concentration of 0.34 M, the PSG@Co-2 composite delivered remarkable microwave absorption performance, achieving minimum reflection loss of − 63.12 dB at 11.20 GHz and a maximum effective absorption bandwidth of 5.68 GHz at a thickness of only 1.65 mm. The study offers a practical and value-added approach to transforming spent graphite anode waste into high-performance microwave-absorbing materials.
✓ 已验证
产品关联
DOI
高影响因子
International Journal of Coal Science & Technology
·
2026
·Vol. 13
·期 1
·15
·
IF 10.1
Hao Haijing,Zhu Ying,Zhong Mei,Liu Yang,Dai Zhenghua,Jin Lijun
Oil-soluble catalyst is a promising alternative to non-oil-soluble catalyst due to excellent dispensability in coal-oil slurry and relatively high activity. To reveal evolution behavior of active phase of the oil-soluble Fe-based catalysts in direct liquefaction of Shangwan coal, three oil-soluble Fe-based catalysts (FeLA, FeOA, FeSA) were synthesized via saponification method with linoleic acid, oleic acid and stearic acid as organic ligands, and were compared with two traditional iron oxide catalysts (Fe 2 O 3 , FeOOH). The evolution of active compositions during different temperatures was studied by XRD, SEM, XPS and HRTEM. Results demonstrated superior stability and catalytic activity of oil-soluble catalyst during direct liquefaction. TG and FTIR analyses confirmed the decomposition at lower temperatures, and formed active phases more readily than Fe 2 O 3 and FeOOH catalysts. The oil yields were significantly improved up to 62.82 wt%, 64.38 wt% and 66.36 wt% for FeLA, FeOA and FeSA, which were higher than those of Fe 2 O 3 and FeOOH catalysts. FeOA and FeLA catalysts particularly excelled in promoting the formation of cycloalkanes, thereby improving oil quality. The characterizations by XRD and XPS analyses of the samples indicated that these oil-soluble catalysts rapidly form Fe 0.875 S at lower temperatures, avoiding intermediate oxide phases. Smaller crystallite sizes were produced for oil-soluble catalysts compared than Fe 2 O 3 and FeOOH. Especially, substantial amounts of Fe 0.875 S were generated for FeSA during initial coal pyrolysis, which activated hydrogen to stabilize coal macromolecular radicals and enhanced coal conversion and yield. This work provides a guide for the development of highly efficient catalysts in direct coal liquefaction.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2026
·
IF 19.7
Jie Yang,Xinyu Li,Shuai Lyu,Shan Wang,Zhichao Chen,Junjiang Zhu
The key to optimizing cerium-based mid-low temperature NH 3 –SCR catalysts lies in elucidating the respective roles of Lewis acid sites (LAS) and Brønsted acid sites (BAS). Herein, a highly dispersed cerium-loaded ZrO 2 catalyst (Ce/Zr) with well-defined LAS and BAS was prepared to investigate their roles in the NH 3 –SCR reaction using in situ DRIFTS, transient DRIFTS coupled with mass spectrometry, operando modulation excitation (ME) DRIFTS, and isotopic 18 O 2 labeling. Experimental results demonstrate that the NH 3 –SCR reaction obeys Eley–Rideal mechanism, in which gas-phase NO reacts with surface adsorbed NH 3 . Both NH 3 adsorbed on LAS (L−NH 3 ) and NH 3 adsorbed on BAS (B−NH 3 ) can be consumed during the reaction. L−NH 3 directly reacts with NO to form N 2 , whereas BAS participates indirectly by adsorbing and transferring NH 3 to LAS, thereby acting as an NH 3 reservoir. Transient half-cycles experiments combined with 18 O 2 labeling reveal that O 2 reoxidizes Ce and drives NH 3 migration from BAS to LAS, regenerating reactive L–NH 3 . Density functional theory calculations further confirm that NH 3 transfer from BAS to LAS proceeds without an energy barrier. These findings reveal a redox-coupled NH 3 transfer mechanism and provide theoretical guidance for the design of efficient Ce-loaded SCR catalysts.
✓ 已验证
产品关联
DOI
高影响因子
WATER RESEARCH
·
2026
·
IF 12.8
Chenxuan Shao,Xiaolong Zhang,Chen Wang,Yafang Wu,Qi Zhang,Yujia Tong,Xiaohui Ju,Weixing Li
Surface hydrophilization is an effective antifouling strategy for membranes. However, it still faces foulants adhering and migrating, leading to irreversible performance decline. Here, inspired by the micro/nano-textured protrusions of the Nepenthes peristome, we proposed a synergistically antifouling strategy combining a stable hydration layer with a physical barrier. Hydrophilic SiO 2 nanoparticles and tea polyphenol (TP) were incorporated via microfluidic electrospinning to construct a superhydrophilic nanofiber membrane. The introduced SiO 2 constructed micro/nano- rough structures as a physical barrier while a stable hydration layer of TP was formed. Molecular dynamics simulations confirmed the robust interfacial binding through a dense hydrogen-bond network. The modified membrane displayed the great permeance of 25,462 L·m -2 ·h -1 ·bar -1 with 99.9 % oil rejection for separating soybean oil-in-water emulsion and the flux recovery ratio was 95.06 % after 300 min. This work provided a general design principle for antifouling interfaces with potential applications in environmental, energy, and biomedical.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MATERIALS LETTERS
·
2026
·
IF 2.6
Hua Gao,Weinan Cao,Zhenfeng Jiang,Zhongchuang Liu,Jiangxiong Deng,Yi Zeng,Xianyi Wu,Dongxing Fu,Shu-Juan Bao
Silicon is recognized as the most promising anode material for lithium ion batteries (LIBs) due to its high theoretical specific capacity (4200 mAh g −1 ). However, the significant volume expansion of Si during cycling restricts its practical application in LIBs. The binder is critical in mitigating the volume expansion stress of Si. This study discusses a new binder, CMC-SB, synthesized by linking sodium tetraborate (SB) with carboxymethyl cellulose sodium (CMC) via borate ester bonds, which enhances the flexibility of the binder. After being folded and subjected to a 200-g load, the CMC-SB film remains intact without breakage, indicating superior flexibility compared to CMC. When used as a binder for Si anodes, CMC-SB significantly improves battery stability during long-term cycling.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Jingxuan Zhao,Huiliang Zhang,Junjia Bian,Zhixin Zhang,Heran Zhao,Mingyu Wang,Yan Zhao,Hongwei Pan
Based on polyacrylic acid (PAA), a novel nanocomposite hydrogel (PCA) was developed by incorporating carboxymethyl cellulose sodium (CMC-Na) and attapulgite (ATP) to synergistically enhance dye adsorption performance. The innovative design leveraged CMC-Na to inhibit ATP aggregation via hydrogen bonding and electrostatic interactions, while improving both dispersion stability and hydrogel hydrophilicity. This modification resulted in a well-defined porous structure, increased specific surface area, enhanced swelling behavior, and superior mechanical integrity. The optimized PCA-4 hydrogel exhibited exceptional adsorption capacities for cationic dyes—486 mg/g for methylene blue (MeB), 442 mg/g for auramine O (AO), 460 mg/g for malachite green (MG), and 450 mg/g for rhodamine B (RB), which significantly outperforming many reported adsorbents. Furthermore, the hydrogel maintained over 80 % removal efficiency after five adsorption-desorption cycles, demonstrating excellent reusability. Its adsorption behavior followed pseudo-first-order kinetics and the Langmuir isotherm model, indicating a physical adsorption-dominated process. This work presents a sustainable, high-performance adsorbent with promising potential for efficient cationic dye removal from wastewater.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Kaiming Kan,Shoujun Ding,Shujing Pan,Mengyu Zhang,Wenzhi Su,Yong Zou,Qingli Zhang
In view of the demand for high sensitivity in optical thermometry based on the fluorescence intensity ratio of thermally coupled levels of rare-earth ions, in this work Ca 2+ -modified double molybdate NaBi(MoO 4 ) 2 co-doped with Yb 3+ and Er 3+ was employed as the host to systematically investigate its upconversion (UC) luminescence behavior and optical temperature-sensing performance. Appropriate substitution of Ca 2+ induces lattice distortion and optimizes the local crystal field and energy-level matching, thereby significantly enhancing the energy transfer efficiency between the activator ions. As a result, the green UC emission intensity in the Ca 2+ -doped samples is markedly increased compared with that of the undoped host, and the green-to-red emission intensity ratio is enhanced by 1.7 times, reaching a value of 62, with the corresponding green color purity exceeding 96%. Meanwhile, Ca 2+ doping effectively tunes the thermally coupled levels of Er 3+ , leading to a 2.05-fold improvement in the absolute optical temperature sensing sensitivity relative to the undoped sample, with a maximum absolute sensitivity of 1.793 %·K −1 , which is much higher than that of other reported UC phosphors of similar type. Cyclic temperature sensing measurements confirm that Ca 2+ -modified Y 3+ ,Er 3+ :NaBi(MoO 4 ) 2 exhibits excellent repeatability in the temperature range of 300-460 K, indicating promising application prospects. This study provides a new design strategy and experimental basis for constructing high-performance double molybdate materials that integrate strong UC luminescence with highly sensitive optical thermometry.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Jingxian Wang,Xueyang Liu,Yixuan Lin,Junjie Wang,Hanwen Zhang,Luoxin Wang,Hua Wang,Siwei Xiong
The integration of ceramic fillers with high thermal conductivity into polymer fiber insulating paper enhances both thermal conductivity and dielectric strength. Nonetheless, elevated filler loadings augment the filler-matrix interface, thereby intensifying phonon scattering. Additionally, filler agglomeration, driven by van der Waals forces, impedes the formation of a continuous thermal network and introduces defects that facilitate electrical treeing. This research draws inspiration from “brick-and-mortar” architectures, employing high-surface-area thermotropic liquid crystal polyarylate (PAR) nanofibers as the continuous mortar and surface-modified hexagonal boron nitride (TMS@h-BN) nanoplates as the bricks. A scalable papermaking process is employed to fabricate high-thermal-conductivity insulating paper with a high filler content. The three-dimensional network structure of PAR nanofibers spatially confines the h-BN nanoplates, effectively preventing their agglomeration. Furthermore, π-π conjugation between the aromatic structures of PAR and the benzene rings of h-BN enhances interfacial bonding by facilitating the diffusion and entanglement of PAR molecular chains during thermal pressing. This results in a dense interfacial structure that provides an efficient pathway for phonon transport, thereby enhancing thermal conductivity and minimizing electrical distortion. At a filler loading of 70 wt%, the TMS@h-BN/PAR nanocomposite paper exhibits superior mechanical performance and flexibility, achieving an in-plane thermal conductivity of 14.19 W·m −1 ·K −1 and a breakdown field strength of 111.17 kV/mm, which represent significant improvements over commercial insulating paper. Additionally, it demonstrates exceptional thermal stability and flame retardancy, with minimal dimensional changes following heat treatment.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Saeed Rehman,Tao Chen,Hongjuan Sun,Muddasir Hanif,Tongjiang Peng,Osama Tariq Satti,Aref Alshameri
Phthalate esters (PAEs), widely used as plasticizers, persist as recalcitrant organic pollutants with severe ecological implications. In this study, a dual-step pyrolysis strategy was employed to engineer a Fe-N-RHC@p-MMt composite photocatalyst enriched with high-valent Fe sites, nitrogen dopants, and oxygen vacancies. The tailored hybrid achieved a remarkable 92 ± 1.4% degradation of dimethyl phthalate (DMP) with a pseudo-first-order rate constant of 0.64 min −1 in a peroxydisulfate (PDS)-mediated oxidation system under near-visible light irradiation. Structural and spectroscopic analyses revealed graphitized carbon frameworks with superior conductivity, efficient charge migration, and abundant Fe(IV) = O species formation. Mechanistic analysis reveals that Fe₄N centers regulate interfacial electron transfer, stabilize high-valent Fe(IV) = O species, and drive selective non-radical PDS activation dominated by singlet oxygen ( 1 O₂). Moreover, the generated intermediates exhibited significantly reduced toxicity, mutagenicity, and bioaccumulation risks (although intermediates P1, P3, and P6 showed elevated toxicity), validating the process's environmental compatibility. These results highlight Fe-N-RHC@p-MMt as a safe and efficient catalyst for sustainable remediation of PAE-contaminated water.
✓ 已验证
产品关联
DOI
PubMed
高影响因子