文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,550+ SCI 论文 与阿拉丁产品引用相关
2,304,480.59 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3301至3312个,产品总数347,550个

切换升序
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY · 2026 ·Vol. 46 ·期 10 ·118263 · IF 6.3

Role of α- and β-Si₃N₄ additions in microstructural regulation, thermal and mechanical property optimization of sintered reaction-bonded Si₃N₄ ceramics

Binbin Fan,Wei Sun,Dengke Zhao,Bohan Wang,Shuo Zhao,Feng Hu,Jie Zhang,Yiyao Ge,Zhipeng Xie,Kexin Chen,Guanghua Liu

Achieving a balance between high thermal conductivity and mechanical property remains a critical challenge for sintered reaction-bonded Si₃N₄ (SRBSN) ceramics. This work investigates the effects of α- and β-Si₃N₄ additions on nitridation behavior, microstructural evolution, and properties of SRBSN ceramics. The results reveal fundamentally different roles of α- and β-Si₃N₄ during nitridation and sintering. Moderate α-Si₃N₄ addition suppresses the α→β transformation, inducing localized grain growth and a bimodal microstructure at 20 wt%. In contrast, β-Si₃N₄ markedly promotes the α→β transformation and heterogeneous nucleation. The sample with 30 wt% β-Si₃N₄ exhibits a pronounced bimodal grain structure with 20.2 % coarse elongated grains (>6 μm), a maximum mean aspect ratio of 1.89, an ultrathin grain-boundary film (∼2.2 nm), and a nitrogen-rich intergranular phase. Consequently, a high thermal conductivity of 114 W·m⁻¹ ·K⁻¹ is achieved while maintaining a flexural strength of 791 ± 29 MPa and a fracture toughness of 9.0 ± 0.3 MPa·m 1/2 .

CAS / MDL: 1309-48-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2026 · IF 9.6

Coral-inspired photoelectrochemical coating with dynamic self-cleaning and antifouling properties

Yushan Ni,Yanhua Liu,Weijun Mo,Geoffrey I.N. Waterhouse,Zhiming Zhang,Liangmin Yu

Marine biofouling poses a major challenge to marine infrastructure and environmental sustainability. Inspired by the dynamic tentacle structures of corals and their exceptional self-cleaning capability, we developed a bioinspired UiO-66-TMG/PPy multifunctional antifouling coating with dynamic self-cleaning properties. Quaternary ammonium molecular brushes in the coating emulate the dynamic motion of coral tentacles, whilst photoelectrochemical coupling endows the coating with integrated bactericidal and self-cleaning functions. Cathodic polarization generates electrostatic repulsion and dynamic molecular motion as the primary antifouling barrier, whereas quaternary ammonium groups and photoelectrochemically generated reactive oxygen species (ROS) construct a secondary chemical barrier for bacterial inactivation and surface renewal. The synergistic effect of these two barriers affords outstanding antibacterial performance. Comprehensive characterization studies by XRD, FTIR, SEM, LSV, EIS, and Mott–Schottky analysis confirmed the successful construction and antibacterial action of the UiO-66-TMG/PPy coating. Under cathodic polarization (−1 V) and visible-light irradiation, the system achieved 98.7 ± 0.9% and 99.8 ± 0.1% inhibition against Escherichia coli and Staphylococcus aureus , respectively, demonstrating broad-spectrum antifouling capability. This work offers a new bioinspired route toward self-cleaning antifouling coatings for advanced marine applications.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
OPTICAL FIBER TECHNOLOGY · 2026 · IF 2.7

Evanescent wave-based fiber optic sensing of humidity with linear fast response via hierarchically assembled porous yttrium chloride-doped carbon quantum dot films

Xingchen Zhou,Xuefei Xiao,Zheyuan Gu,Jun Qian,Chuanyang He,Kewen Chen,Min Lai,Yan Ma,Bo Liu

Developing a fiber optic humidity sensor with exceptional performance remains a challenge, requiring simultaneous optimization of multiple parameters including cost, sensitivity, response/recovery, hysteresis, dynamic range, stability and temperature effect. Herein, we present fabrication of evanescent wave-based fiber optic humidity sensors using hierarchical porous yttrium chloride-doped carbon quantum dots (CQDs) as sensing material. CQDs were prepared by a hydrothermal process and were subsequently assembled on a plastic fiber core using a light-driven deposition technique. The sensor exhibited an optimal average sensitivity of 0.72 %/%RH, a fast response of 2.6 s (0.46 s by exhalation testing) and an excellent linearity with the determination coefficient R 2 of over 0.99 within a relative humidity (RH) range of 0–75 %. Furthermore, good long-term stability, repeatability and reproducibility were achieved with trivial temperature interference. We demonstrated accurate recognition of breathing patterns and real-time monitoring the onset of sleep apnea using the sensor without temperature cross-sensitivity.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY · 2026 · IF 6.6

Structural and mechanistic insights into industrial phenolic compounds as potent inhibitors of human and rat 5α-reductase 1

Yixing Shi,Yinghao Huang,Chentao Ding,Hao Lin,Jiachen Lin,Shaowei Wang,Ren-shan Ge,Wangning Shangguan

This study identifies environmental chemicals 4-nonylphenol, 4-dodecylphenol, pentabromophenol, and popular anesthetics drug propofol as moderate to potent inhibitors of human and rat 5α-reductase type 1 (5α-R1), revealing novel endocrine-disrupting mechanisms in human brain cell and rat brain microsomes. Pentabromophenol exhibited the highest potency (IC₅₀ = 1.71 µM for human 5α-R1) with mixed/noncompetitive inhibition, supported by Surface Plasmon Resonance binding ( KD = 1.22 µM). A 3D-QSAR pharmacophore model (Hypo1) highlighted critical structural features, including a hydrogen-bond acceptor and hydrophobic interactions, explaining pentabromophenol efficacy. Species differences emerged, with human 5α-R1 showing high pentabromophenol binding affinity (-6.80 kcal/mol via halogen bonds with Arg176). Inhibition may reduce neurosteroids (e.g., allopregnanolone) and androgens (e.g., dihydrotestosterone). These findings underscore industrial phenolic compound capacity to dysregulate neurosteroid homeostasis in a structure- and species-dependent manner, highlighting their endocrine-disrupting risks.

CAS / MDL: 104-40-5
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING · 2026 · IF 8.2

Multifunctional SiCf/ZrC-TiC ceramic foam with outstanding thermal stability: synergistic broadband electromagnetic wave absorption, load-bearing, and thermal insulation

Jiaqi Liu,Cuiyan Li,Haibo Ouyang,Tianzhan Shen,Shuai Zhang,Xinnuo Wang,Xinge Niu

Functional ceramic foams are promising candidate materials that integrate electromagnetic absorption, load-bearing, thermal insulation, and thermal stability, to meet the challenges of extreme environments in modern aerospace technology. In this study, SiC fiber has been introduced in the ZrC-TiC ceramic foam to enhance the mechanical properties and electromagnetic wave absorption performance. The SiC f /ZrC-TiC ceramic foam has been fabricated by a simple precursor self-foaming method with a porosity of 76.9% and a density of 0.31 g/cm 3 . The interconnection of SiC fibers endows SiC f /ZrC-TiC ceramic foam with excellent load-bearing capacity with a compressive strength of 41.3 MPa. Meanwhile, the introduction of SiC fiber boost its electromagnetic wave absorption performance with a RL min  = −63.5 dB and EAB max  = 6.04 GHz. The high porosity endows it with a low thermal conductivity advantage of 0.231 W·m −1 ·K −1 . Particularly, SiC f /ZrC-TiC ceramic foam exhibit outstanding high-temperature stability. After 10 thermal cycles at 1600 °C, the compressive strength remained at 30.7 MPa, and the EAB max was 5.28 GHz (RL min  = −57.2 dB). The multifunctional synergistic advantages of SiC f /ZrC-TiC ceramic foams provide a feasible strategy for the design of multifunctional protective materials in aerospace.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2026 · IF 12.5

Double-defect ZnO aerogel-supported single-atomic ruthenium for selective gas-solid phasephotooxidation of methane to methanol

Xiaochao Xu,Xiangxia Wu,Zhen Xiao,Zhi-Ang Zhao,Guanwei Peng,Jinni Shen,Lifang Yang,Wenxin Dai,Zizhong Zhang

The selective photooxidation of CH 4 into value-added chemical products under ambient conditions offers a viable pathway for the rational utilization of natural gas resources. However, the direct oxidation of methane to synthesize oxygenates still faces significant challenges due to insufficient chemo-selectivity in active intermediate radical formation and consecutive side reactions of primary products. Rather than introducing multiple metal species to create active sites, we show that controlled defect generation on the substrate offers an effective pathway for catalytic enhancement. Here we developed a ZnO aerogel-supported ruthenium single atom photocatalyst for selective conversion of CH 4 to CH 3 OH. Under ambient conditions, 1Ru/ZnO achieved a methanol production rate of 407 μmol g −1  h −1 with a high selectivity of 91.7%. The observed activity enhancement is principally attributable to two factors: (i) the ZnO aerogel microspheres with abundant dual-defect structures serve as an effective substrate material, offering abundant active sites to facilitate the CH 4 activation process; and (ii) monatomic Ru 4+ sites were employed as efficient active sites for methane adsorption and dehydrogenation; meanwhile the separation of redox sites was optimized to effectively suppress over-oxidation. The integration of aerogels (with abundant defect sites) and supported metal species offers a novel strategy for achieving direct CH 4 oxidation to CH 3 OH‌.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2026 · IF 12.5

Alkali-activated fly ash catalyzed sustainable and scalable production of tough composite hydrogels toward versatile applications

Xiaowen Shi,Fengbo Zhu,Huan Zhao,Shiming Liang,Junwei Qiao,Wenwen Yu,Lan Jia,Qiang Zheng

The growing demand for industrial applications of composite hydrogels (CHs) has posed new challenges of their design, particularly in achieving rapid and scalable production under mild conditions. However, conventional fabrication of CHs either necessitates energy-intensive processes, or relies on highly expensive fillers, which severely hinders their practical applications. To address these challenges, herein, we leverage fly ash (FA), a readily available solid waste from coal combustion, as a sustainable and cost-effective alternative. Remarkably, upon alkali activation, FA spontaneously catalyzes rapid free radical polymerization of vinyl monomers at ambient conditions, without need for external energy input, enabling sustainable and scalable production of CHs of excellent mechanical properties. The underlying mechanism is that alkali treatment of FA triggers an exothermic dissolution of its oxide layer, which leads to substantial heat releasing, lowering the energy barrier for decomposition of conventional thermal initiators (potassium peroxodisulfate, KPS), and facilitating the generation of massive free radicals. By regulating the alkali concentrations, the gelation behaviors of CHs can be finely controlled, with initial gelation time ranging from 2 min to 20 mins. Moreover, the incorporated FA particles render the gel matrix with extra energy dissipation capabilities, leading to pronounced enhancement in their mechanical performance. The incorporation of FA resulted in a fivefold increase in breaking strain (756%) and a tenfold increase in both breaking stress (207 kPa) and tearing energy (210 J/m 2 ) relative to neat gels. We further showcase the promising potential of this FA-based CHs system, with its self-catalyzed polymerization capability, in various practical applications, including rapid borehole sealing and adhesives. This work should pave new way toward designing cost-effective CHs with scalable production capabilities for practical industrial applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS · 2026 · IF 5.4

Ionic liquid-integrated MOF-808 for thiophene capture: Insights from Monte Carlo simulations and cyclic stability tests

Yiting Han,Yueyang Xu,Liming Kong,Guojun Shi,Yongping Zeng

Metal-organic frameworks (MOFs) have garnered significant attention in adsorption desulfurization due to their high density of adsorption sites and permanent porosity. However, despite the abundant adsorption sites in Zr-based MOF-808, its relatively large pore channels and volumes may limit the adsorption efficiency for smaller molecules such as thiophene. Incorporating room-temperature ionic liquids (rILs) into MOF structures offers a promising strategy to address a key limitation of rILs-their high viscosity at ambient conditions, which often restricts mass transfer rates during liquid-liquid extraction. In this study, an IL-modified MOF-808 was synthesized to assess its performance in desulfurization. Characterization results confirmed that the rILs successfully infiltrated the MOF-808 pores without changing its framework integrity. Adsorption properties for thiophene in ILs/MOF-808 composites were investigated through Grand Canonical Monte Carlo (GCMC) simulations alongside experimental adsorption measurements conducted at 298 K. Further Monte Carlo (MC) simulations demonstrated that the presence of ILs enhanced the affinity for thiophene and increased the number of accessible adsorption sites within the composite. The adsorption capacity of ILs/MOF-808–20 remained stable over four adsorption-regeneration cycles using n-octane as the solvent, providing a potentially feasible solution for deep desulfurization.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
FOOD CHEMISTRY · 2026 · IF 10.4

Construction of lignin–metal polyphenol networks and their application in smart paper-based active packaging: Multifunctional materials with both antioxidant and UV-shielding functions

Lirong Lu,Jiatian Zhu,Jingpeng Zhou,Xi Cheng,Baojie Liu,Chengrong Qin,Chen Liang,Caoxing Huang,Shuangquan Yao

Facing the urgent need for sustainable and functional food packaging, developing high-performance materials from natural polymers is crucial. Herein, we propose a green strategy inspired by crustacean exoskeletons to construct lignin–metal polyphenol networks (L-MPNs) via proton-based ionic liquid pretreatment and metal-ion coordination. This forms a stable 3D network utilizing lignin's phenolic hydroxyl groups, which significantly enhances antioxidant activity, achieves >99% UV shielding, and exhibits 92.5% DPPH radical scavenging capacity. Applied to paper packaging, Ferric-ion-coordinated lignin-metal polyphenol networks (FL-MPNs, 100 g/m 2 ) impart excellent barrier and antioxidant properties alongside maintained mechanical strength, cutting water vapor transmission by ∼40%. In freshness tests, they reduced mass loss to 3.52% and pH change to 0.17, effectively inhibiting food deterioration. Thus, FL-MPNs advance lignin valorization for next-generation sustainable smart packaging to ensure safer, more stable food preservation.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2026 · IF 6.7

NiO@Ni/N-C materials with different ratios as bifunctional electrocatalysts for overall water splitting

Liquan Xiong,Ying Wang,Di Gao,Yueqi Song,Dongsheng Chen

Hydrogen energy is the core of future clean energy, and the study of hydrogen evolution reaction (HER) electrocatalytic mechanisms is essential for efficient production. The development of efficient and low-cost electrocatalysts is a key challenge in achieving ideal hydrogen generation. In this study, a Ni-BDC/TpPa-1 heterojunction material was prepared for the first time, which was converted into a derived heterojunction material (NiO@Ni/N-C) after high-temperature pyrolysis treatment, exhibiting excellent electrocatalytic activity in an alkaline solution. Without iR compensation, the overpotential of HER is only 83 mV at a current density of 10 mA·cm⁻². Compared with thermally decomposed Ni-BDC and TpPa-1 monomer, its electrocatalytic activity is improved by 158 and 435 mV, respectively, and it exhibits excellent stability over 100 h. The design of this novel material offers a new solution for enhancing the efficiency of transition-metal-based catalysts.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF POWER SOURCES · 2026 · IF 8.4

Tailoring electroactive P-C bonds in pitch-based soft carbon toward sodium-ion batteries

Ling Sheng,Hang Wang,Shaoyang Wu,Fan Wu,Xin Ye,Kang Liang,Jianbin Li,Peng Wei,Yurong Ren

Pitch serves as an economical substance characterized by a high carbon output, rendering it appropriate for employment as negative electrode components in Na-ion batteries, thereby facilitating enhanced value-added utilization. However, through direct thermal decomposition of pitch, the resulting carbon materials characterized by high graphitization, reduced interlayer spacing, and challenges in sodium ion deintercalation, ultimately leading to limited electrochemical performance. To expand the carbon interlayer spacing, this study adopted the phosphorus doping strategy, using NaH 2 PO 2 as the phosphorus source, which interacts with the aromatic molecules in pitch to form P-C bonds. The introduction of P-C bonds effectively suppressed graphite microcrystal development during high-temperature carbonization, resulting in decreased graphitization levels and expanded interlayer distances in the carbon matrix. Besides, P-C bonds demonstrate dual functionality by improving sodium ion adsorption while simultaneously reacting with alkali metal Na  +  to form Na x PC y , which directly participated in sodium storage. Consequently, the soft carbon material that has been doped with phosphorus showcases enhances sodium storage capabilities when compared to traditional soft carbon material obtained through direct pyrolysis, achieving a discharge capacity of 138.56 mAh g −1 when tested over 3500 cycles at 1 A g −1 . Therefore, this research demonstrates a simple and effective method for utilizing pitch in the sodium-ion batteries.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2026 · IF 12.5

Asymmetric phase change gels with adhesive self-healing inner layer and sponge-like microcapsule-filled outer layer for long-lasting cold chain applications

Yang Hu,Xiaolin Qiu,Lixin Lu,Liao Pan,Tingting Yu

To address the inherent trade-offs between cold energy storage, insulation, mechanical robustness, and interface adaptability in traditional single-component phase change materials (PCMs) for cold chain transportation, we report an asymmetric bilayer PCM gel constructed via hydrogen bonding and electrostatic coupling. The adhesive, self-healing inner hydrogel (PAM@IL Gel) doped with ionic liquid ([Emim][BF₄]) serves as a cold energy storage layer owing to its subzero phase change temperature (−3.43 °C), along with high energy storage density (224.4 J·g −1 ) and enhanced thermal conductivity (0.621 W·m −1 ·K −1 ). Its high viscosity and adhesive strength (7.3–48.0 kPa on various substrates) ensure intimate contact with products and maintain mechanical integrity during repeated thermal cycles, while excellent self-healing efficiency (91% within 5 min) repairs mechanical damages. The sponge-like outer layer (ODE/SiO₂@PAM/PAA Gel), fabricated via a foam polymerization method and embedded with n-octadecane microcapsules and octadecane phase change emulsion, acts as an insulating layer with a near-room-temperature phase change temperature (27.43 °C), complemented by low thermal conductivity (0.192 W·m −1 ·K −1 ) and structural rigidity. The optimized asymmetric bilayer (inner: outer = 2:1) achieved a compressive strength of 324.5 kPa, representing 42% and 18% improvements over single inner and outer gels, respectively. During a simulated heating test, its low-temperature plateau duration increased by 90.9%, demonstrating a synergistic balance between energy storage and insulation. This work demonstrates a facile strategy to construct asymmetric PCM architectures with integrated adhesion, self-healing, and thermal management, offering potential for advanced cold chain storage and energy-efficient refrigeration applications.

CAS / MDL: 110-18-9 110-26-9
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。