JOURNAL OF APPLIED POLYMER SCIENCE
·
2026
·
IF 3.1
Tao Zhu,Anqi Ming,Yuxiang Cao,Wencong Li,Xiaoxiao Li,Jun Sun,Lin Chen
CO 2 -responsive cationic polymers offer a route to couple industrial kiln exhaust pretreatment with sludge deep dewatering, using the abundant CO 2 in flue gas as a trigger to enhance flocculation. This study proposes a flocculation then activation strategy to enhance the flocculation effects of the CO 2 -responsive Poly-(DMC-DMAEMA) copolymer. The polymer is first dispersed in its low-viscosity, non-activated state to achieve uniform contact with suspended particles, followed by CO 2 bubbling to trigger in situ protonation of the PDMAEMA blocks. Using a diatomaceous suspension as model sludge, flocculation behaviors under different CO 2 addition modes were systematically compared. Pre-activation caused a sharp increase in solution viscosity and poor dispersibility, aggravating inhomogeneity. Post-activation-dispersion followed by CO 2 activation effectively balanced uniform adsorption with in situ bridging reinforcement, yielding superior floc growth, turbidity removal, and dewatering efficiency. This mechanistic strategy directly resolves the dispersion problem characteristic of conventional high-molecular-weight flocculants, thereby establishing a foundation for the integrated application of kiln exhaust pretreatment and sludge deep dewatering.
✓ 已验证
DOI
高影响因子
Molecular Catalysis
·
2026
·
IF 4.3
Xinyu Fu,Yufei Zhang,Yang Xu,Danjun Jin,Jinghuan Chen,Jiade Wang
Amino-ligand-assisted MOF derivation forms hierarchical Pt@CeO 2 microspheres. • -NH 2 groups anchor Pt species, preventing aggregation and maintaining pores. • The catalyst shows exceptional toluene oxidation, achieving a low T 90 of 177 °C. • In situ DRIFTS elucidates a sequential Mars-van Krevelen oxidation pathway. A novel amino-ligand-assisted MOF-derivation strategy was developed to fabricate hierarchically structured Pt@CeO 2 microspheres with highly dispersed Pt species (0.34 wt. %). The -NH 2 functional groups effectively anchored Pt precursors, preventing aggregation and preserving hierarchical porosity during calcination. The resulting catalyst exhibited exceptional toluene oxidation performance, achieving T 50 and T 90 values of 155 and 177 °C, respectively, significantly outperforming conventional impregnation-derived counterparts. Characterization revealed abundant surface oxygen vacancies, enhanced Ce 3+ concentration, and superior low-temperature reducibility due to strong metal-support interaction. In situ DRIFTS analysis confirmed a Mars-van Krevelen mechanism with sequential degradation pathway: toluene → benzyl alcohol → benzaldehyde → benzoate → anhydride → CO 2 and H 2 O. The superior catalytic performance arises from the synergistic effects of the hierarchically oriented mesoporous structure, inherently enlarged specific surface area, and the highly dispersed active Pt species confined within the CeO 2 matrix. This work establishes a versatile platform for designing high-performance catalysts with controlled metal dispersion and hierarchical porosity for VOC abatement and oxidation reactions. Download: Download high-res image (202KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Wen-Zhen Li,Dongyang Li,Huanhuan Wang,Hongli Zhang,Xipeng Li,Xiaoling Yang,Jiamei Wang,Anning Yang,Qin Zeng,Judun Zheng,Yideng Jiang,Yuhui Liao
Green-Synthesized Scaffolds for Smart Hydrogels. Green-synthesized quaternized chitosan (QCS) represents an ideal macromolecular backbone for constructing functional hydrogels, driven by its structural tunability, excellent aqueous solubility, and intrinsic cationic nature. Unlike native chitosan, the targeted introduction of quaternary ammonium groups endows QCS with a permanent positive charge. This modification not only enhances its degradation but also confers superior antibacterial efficacy and mucoid hesiveness. By leveraging QCS as a versatile scaffold to rationally design polysaccharide-based hydrogels with tailored physicochemical and biological profiles, this work provides a sustainable and highly effective platform for advancing next-generation bioactive materials. • Sol-Gel transition and enhanced antibacterial performance. Macrocyclic host TEBox markedly improves EGCG’s (guest) water solubility and antibacterial effect via host-guest interactions. It also effectively drives the Sol-Gel transition of QCS-EC Sol, finally enabling the preparation of bacteria-responsive multifunctional injectable hydrogel (MQCEC-TEB Gel). This gel has excellent skin adhesion and promotes cell proliferation and tissue regeneration. • Real-Time, Visual Infection Monitoring. Key innovation: a chaotropic effect-based bacteria-responsive agent (TEBox-B 12 ). When exposed to bacteria, TEBox-B 12 undergoes in situ reduction to generate stable organic radicals, causing rapid visible color change (pale yellow to deep purple). This provides a revolutionary tool for early, non-invasive, real-time infection diagnosis. • Synergistic Anti-infection Therapy for Deep Tissue. Radicals from the above reaction not only enable color development but also have strong NIR-II absorption, allowing the hydrogel to achieve deep-tissue photothermal (PTT) and photodynamic (PDT) antibacterial therapy. NIR-II light penetrates deeper into tissue, overcoming traditional phototherapy limitations. This study presents a new smart dressing and "diagnosis-and-therapy integration" strategy, offering a new paradigm for managing invasive infection wounds. Smart hydrogel dressings with sustained wound-healing promotion and infection-monitoring capabilities demonstrate significant potential for invasive infection wound repair. Inspired by mussels, a highly adhesive and multifunctional injectable antibacterial hydrogel dressing (MQCEC-TEB Gel) was developed for wound repair and real-time infection monitoring, comprising a viscous hydrogel scaffold (QCS-EC) and a bacteria-responsive agent (TEBox-B 12 ) crosslinked via host-guest interaction. The epigallocatechin gallate (EGCG) was incorporated into quaternized chitosan (QCS) enhancing the viscosity of QCS and forming the QCS-EC scaffold by hydrogen bonding, providing sustained antibacterial activity and promoting wound-healing. Meanwhile, the bacteria-responsive agent TEBox-B 12 self-assembles via a chaotropic effect between box-shaped quaternized pyridinium salt (TEBox) and the superchaotropic anion B 12 H 12 2− . Upon bacterial exposure, TEBox-B 12 underwent in situ reduction, generating stable organic radicals that trigger a rapid visible color change from pale yellow to deep purple for real-time infection monitoring. The resulting radicals also exhibit strong NIR-II absorption, enabling deep-tissue photothermal (PTT) and photodynamic (PDT) antibacterial therapy. The host-guest interactions between TEBox of TEBox-B 12 and EGCG on QCS-EC improves the water solubility and antibacterial efficiency of EGCG, facilitating Sol-Gel transition to form the injectable MQCEC-TEB Gel platform. This system synergistically integrates host-guest interaction, NIR-II PDT, and PTT to efficiently eradicate deep-tissue bacteria and promote wound healing, offering a novel multimodal strategy for early diagnosis, non-invasive monitoring and treatment of invasive infection wounds.
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Chemistry
·
2026
·
IF 7.4
Yang Li,Bo Zhao,Mingrui Yu,Renjie Bai,Yongfan Men,Yuan Wang,Xuehui Xiang,Ziyao Zhu,Lei Yan,Yunlong Li
Precursor-state grain engineering improves CsPbBr 3 powders for thick-film fabrication of reasonable quality. • Scalable CsPbBr 3 phase-pure films of uniform microstructure are achieved by blade-coating method. • Reduced trap density and structure disorder improve carrier transport and suppress ion migration. • CsPbBr 3 thick-film X-ray detectors perform high sensitivity and low detection limit. Solution-processed polycrystalline metal halide perovskite thick films have emerged as high-potential candidates for scalable direct X-ray detection owing to their strong X-ray attenuation, large mobility–lifetime (μτ) products, and low-cost fabrication. However, the solution-processing route typically leads to abundant defects in the films, which act as charge trapping centers and facilitate ion migration, thereby limiting device performance and operational stability. Here, we present a precursor-state grain engineering strategy based on high-quality CsPbBr 3 powders to suppress defect formation. The approach is compatible with scalable blade-coating processes. By systematically comparing three powder synthesis routes, we identify ball milling as the most effective method, as it enables molecular-level mixing and pre-reaction of CsBr and PbBr 2 , yielding phase-pure and highly crystalline CsPbBr 3 powders. Thick films derived from these optimized precursors exhibit reduced trap-state density, suppressed ion migration, and enhanced μτ products. As a result, the optimized detector delivers a high sensitivity of 1.95 × 10 5 μC Gy air −1 cm −2 and a low detection limit of 72.4 nGy air s −1 under a low operating bias of 50 V . Moreover, the device demonstrates excellent operational and storage stability. This study establishes precursor-state engineering as an effective strategy for achieving high-performance polycrystalline perovskite X-ray detectors.
✓ 已验证
DOI
高影响因子
Journal of Science-Advanced Materials and Devices
·
2026
·Vol. 11
·期 3
·101222
·
IF 6.9
Dongxu Pan,Han Zheng,Li Zheng,Ling Zhang,Zhengfa Li,Qin Shi,Zhengdao Chen,Pengxi Xu,Yuyan Li
Capacitors with dielectrics as media have drawn great attention for the energy-storage application of high-power electronic systems. Sodium niobate (NaNbO 3 ) is the famous antiferroelectric with more phases and phase transitions, but without perfect recoverable energy storage density W rec and efficiency η . Herein, the relaxor ternary NaNbO 3 -LaFeO 3 -Sr(Fe 0.5 Nb 0.5 )O 3 ceramics are constructed by employing domain and domain wall engineering for integrating the merits of relaxors and antiferroelectrics. The phase transforms from orthorhombic P bcm to P mmn, and relaxor characters are revealed by the rotations of domains and the movements of domain walls. Particularly important, 0.88NaNbO 3 -0.096LaFeO 3 -0.024Sr(Fe 0.5 Nb 0.5 )O 3 demonstrates the great properties of high W rec as 2.645 J/cm 3 and super η as 80.7% at 230 kV/cm, less than the large electric breakdown strength E b of 235 kV/cm. These results suggest that NaNbO 3 -based ceramics are suitable for advanced capacitors, and the feasible strategy of domain and domain wall engineering is developed to provide novel energy storage dielectrics.
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF CHEMICAL ENGINEERING
·
2026
·
IF 3.5
Sen Huang,Yulu Ma,Xingchao Hua,Meng Zhou,Anrong Yao,Yanping He,Guoyin Lai
Microcapsule particles suspension stabilization via rheological structuring. • Enhancement of microcapsule particles–substrate interfacial adhesion. • Molecular-level mechanism via density functional theory. Fragrance oil microcapsules are widely used in the aroma cosmetotextiles for long-lasting fragrance delivery; However, its actual performance is often limited by poor suspension stability and weak adhesion to the substrate in aqueous systems. This study examined the influence of different suspending agents and thickeners on microcapsule stability and retention. The addition of HCO-HS enabled microcapsule dispersions to maintain suspension stability for more than 120 days. Rheological analysis showed that the HCO-HS–microcapsule system formed a thixotropic three-dimensional network structure with a yield stress of about 0.36 Pa, which effectively counteracted microcapsule buoyancy. HCO-HS macromolecules also formed a reinforcing encapsulation layer on the microcapsules, which reduced electrostatic repulsion and increased their retention on cellulose membranes from 16% to 87.2%. AFM measurements further revealed that HCO-HS–treated microcapsules exhibited more than threefold higher adsorption strength than the untreated group, which suggested that, in addition to electrostatic adsorption, molecular-bridging forces contributed to enhanced adhesion. Furthermore, the interaction mechanism of HCO-HS with cellulose was deciphered through a comprehensive experimental and theoretical study by density functional theory. Overall, HCO-HS improves both the suspension stability and fabric retention of fragrance-microcapsules, providing an effective strategy for their applications in daily chemical products and aroma cosmetotextiles. Download: Download high-res image (291KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Yuxin Fu,Guoyan Shen,Suqin Liu,Weiwei Zhu,Hao Yuan,Wei Xie,Zhen He,Kuangmin Zhao,Jue Wang
The electronic structure nature of catalytic centers toward high-efficiency aqueous S/Fe RFBs is unraveled. • A novel descriptor is proposed to quantitatively correlate the electronic structure with the catalytic performance. • Catalysts with optimal electronic structures significantly boost the energy efficiency of aqueous S/Fe RFBs. • The insight into electronic structure modulation is critical to guide the design of efficient catalysts. The sluggish kinetics of reducing polysulfide ions on the anode of polysulfide/ferricyanide redox flow batteries (S/Fe RFBs) severely limit the energy efficiency. Even though catalysts are developed to address this issue, the nature of electronic structure of catalytic center in accelerating the reduction reaction is not understood. Therefore, this study designs the electronic structure of catalytic center through transition metal based phthalocyanines to promote the reduction kinetics and improve the efficiency. More importantly, the nature of electronic structure of catalytic center in realizing efficient S/Fe RFBs is unraveled for the first time. A novel descriptor is formulated to quantize the connection between the electronic structure and catalytic activity, successfully identifying the electronic structure with the highest activity. After loading the catalyst with the optimum electronic structure, the average energy efficiency at 80 mA/cm 2 reaches 70.70%, 25.52% higher than the pristine battery (45.18%), and the cycling performance extends from 200 to 1000 cycles at 60 mA/cm 2 . This study provides insight into the primary issue of S/Fe RFBs through regulating the electronic structure of catalytic center, which is significant for developing efficient RFBs. Download: Download high-res image (357KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Juejin Teng,Min Wang,Wenwen Zhou,Lina Geng,Yilin Wang,Mingbo Wu,Zhongtao Li
Atomic phosphorus doping creates Lewis-base “proton pump” sites that coordinate interfacial water, dramatically lower the water dissociation barrier (0.87 → 0.05 eV). • This targeted acceleration of the rate-determining step boosts the peak power density of Zn–air batteries to 183 mW·cm -2 . • Increases the open-circuit voltage and broadens the operational voltage window. Development of Fe-NC catalysts is fundamentally challenged by their performance decay in acidic media, originating from insufficient proton-coupled electron transfer kinetics and irreversible iron leaching. Herein, we transcend conventional electronic structure modulation by introducing a local interfacial pH tailoring strategy via atomic phosphorus doping. The incorporated P species, serving as Lewis-base sites, function as efficient “proton pumps”. They actively coordinate with interfacial water molecules via lone-pair electrons, which not only enhances H 2 O adsorption but also significantly weakens the O H bond, drastically reducing the water dissociation energy from 0.87 to 0.05 eV. This triggered water activation creates a unique proton-enriched interfacial microenvironment at the catalyst interface while maintaining an alkaline bulk electrolyte, a phenomenon directly visualized by in-situ Raman spectroscopy. The accelerated local proton supply promotes the rate-determining *OOH formation step, while the modulated electronic structure concurrently stabilizes the Fe-Nₓ centers, suppressing Fe dissolution to a remarkably low level. When deployed in a Zn-air battery, this synergistic mechanism enables the Fe-P-NC cathode to achieve a record-high power density of 183 mW·cm −2 . This work underscores the profound potential of active interfacial microenvironment engineering in breaking the activity–stability trade-off for advanced electrocatalysis.
✓ 已验证
产品关联
DOI
高影响因子
International Journal of Pharmaceutics-X
·
2026
·
IF 7.9
Yingrong Chen,Lu Wang,Renjie Wu,Jiawei Zhu,Weili Zhang,Yuepiao Cai,Tao Xue,Xiang Yu
Corneal neovascularization (CNV) is a leading cause of corneal blindness. Although resveratrol (RES) effectively inhibits neovascularization, its clinical utility remains severely limited by poor aqueous solubility and low permeability across ocular surface barriers. To address these challenges, we developed dissolving microneedle patches encapsulating RES-loaded bovine serum albumin nanoclusters (RES-NC@MN). Specifically, we fabricated RES-NCs via a microfluidic-assisted nanoprecipitation method and systematically optimized the formulation using a three-factor Box-Behnken design. The optimized RES-NCs exhibited uniform spherical nanostructures (∼158 nm) with high encapsulation efficiency. XRD and DSC analyses confirmed the amorphous state of the encapsulated drug. The resulting RES-NC@MNs demonstrated sufficient mechanical strength for corneal insertion and facilitated rapid drug release. Notably, the steady-state flux of RES from RES-NC@MNs was approximately 10-fold higher than that from RES suspensions. Pharmacokinetic studies revealed that RES-NC@MNs achieved a 7.2-fold increase in C max and a 26.5-fold greater AUC 0-∞ compared to conventional RES suspensions. In a rat alkali-burn model, treatment with these MNs reduced the neovascular area by approximately 70% and significantly suppressed CD31 and VEGF expression alongside pro-inflammatory cytokine levels. Consequently, the RES-NC@MN system presents a robust strategy for delivering lipophilic therapeutics to the ocular surface, offering enhanced anti-angiogenic efficacy for CNV treatment.
✓ 已验证
DOI
高影响因子
Petroleum Exploration and Development
·
2026
·Vol. 53
·期 3
·875-886
·
IF 10.7
Qing YOU,Xingxing DING,Hanzhou LI,Xiaokai HUANG,Zhirong JIN,Caili DAI,Jiaping TAO
Given the stringent requirements for friction reducers in terms of long-distance friction reduction, efficient proppant transport, temperature resistance and viscosity enhancement in deep oil and gas reservoir fracturing development, an aqueous two-phase high-viscosity friction reducer ANSD-PADA suitable for deep reservoir fracturing was prepared by introducing nanomaterial ANSD and through the aqueous two-phase polymerization. Its mechanisms of temperature resistance, viscosity enhancement, and friction reduction were explored by means of fluorescence spectroscopy, microscopic morphology observation, nanomechanical testing and other analytical methods, and field tests were also carried out. The introduction of hydrophobic monomer N-(3-dimethylaminopropyl) methacrylamide enables PADA (a self-synthesized hydrophobic terpolymer) molecules to entangle, associate and self-assemble into a honeycomb-like network structure under the combined effects of van der Waals forces, electrostatic repulsion and hydrophobic interaction. This structure further increases the hydrodynamic volume, thereby significantly improving the viscosity-enhancing performance of the product. ANSD fills the pores of the polymer network structure, effectively strengthening the network skeleton and association junctions, and remarkably improving the temperature resistance of the system. The friction reducer retains a friction reduction rate of 73.36% at 130 °C, with a temperature resistance up to 150 °C, and it has demonstrated encouraging results in the pilot site at Well XX-HF targeting deep shale oil reservoirs on the northern slope zone of the Gaoyou Sag, Subei Basin, China.
✓ 已验证
DOI
高影响因子
BIOMATERIALS
·
2026
·
IF 13.6
Rong Yang,Xiongfeng Nie,Qian Zhang,Jiaxing Shao,Chunyan Cui,Wenguang Liu
Inspired by natural protein-based adhesives and protein-guided biosynthesis and assembly processes, this work proposes a strategy for constructing a bioactive dynamic adhesive through a protein-initiated polymerization cascade. In this system, ovalbumin (OVA) acts as a macromolecular director, and sodium lipoate (LANa) serves as a polymerizable bioactive monomer. The surfactant property of LANa disrupts the tertiary structure of OVA, exposing hydrophobic domains and thiol groups. LANa subsequently binds to these exposed hydrophobic microdomains to form OVA-LANa complexes, while the exposed thiols further initiate the ring-opening polymerization of LANa via thiol-disulfide exchange. This cascade proceeds rapidly and spontaneously without external energy input, complex synthetic procedures, or additional catalysts. The resulting metastable precursor solution can be lyophilized and ground into a storable powder (OPLA-P). Upon contact with body fluids, OPLA-P rapidly rehydrates and reinitiates polymerization, forming an in situ solidified adhesive hydrogel for efficient sealing. Furthermore, the sustained release of bioactive LANa helps regulate the regenerative microenvironment and accelerates wound healing. After fulfilling its functions, the hydrogel gradually dissolves spontaneously, helping alleviate the adhesion-trauma-free dilemma. When evaluated in diabetic ulcer models, including full-thickness skin defects and oral ulcers, OPLA-P exhibits superior therapeutic effects to those of the selected commercial materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
TALANTA
·
2026
·
IF 6.7
Weiyu Wang,Aoyue Yang,Huiqi Yang,Xiaoying Zhang,Shuang Li,Xiangyan Kong,Hui Yang
Non-invasive sweat analysis holds significant promise for personalized health monitoring, yet existing technologies face limitations in mechanical compatibility, signal fidelity, and multimodal detection. Here, a multimodal sensing platform based on a stretchable organic field-effect transistor (OFET) array is presented to address these challenges. The OFET device exhibits excellent stretchability and operational stability, retaining stable electrical performance after 1000 stretching cycles at 30% strain and showing no significant threshold voltage drift under 3 h of bias stress. With extended-gate electrodes functionalized with selective membranes and enzymes, the system detects Na + , K + , Ca 2+ , glucose, and lactate over physiologically relevant ranges (1 – 100 mM, 1 – 100 mM, 0.1 – 10 mM, 50 – 250 μM, and 5 – 25 mM, respectively), demonstrating high sensitivity, selectivity, and accuracy. Specifically, the ion sensors exhibited detection errors below 4.5%, while the glucose and lactate sensors showed remarkably low response variations with relative standard deviations (RSD) of only 2.16% and 1.18%, respectively. The sensor retains reliable performance in artificial sweat, demonstrating strong resilience to complex biofluid matrices. Integrated with a miniaturized flexible circuit and wireless module, our platform enables real-time data acquisition, processing, and visualization via a mobile application. This work establishes a robust foundation for future wearable diagnostic systems capable of continuous, multi-parameter physiological monitoring.
✓ 已验证
产品关联
DOI
高影响因子