Scientific Reports
·
2026
·
IF 4.9
Zhang Guangteng,Chen Yadong,Wang Meichen,Ge Da,Du Qiang,Ke Li,Gong Tianxing,Qi Feng,Bao Juncheng
Hydrogels are widely used in tissue engineering and scaffold fabrication due to their excellent biocompatibility, while 3D printing excels at creating complex architectures. Among various techniques, low-temperature extrusion-based 3D printing has shown promise for hydrogel scaffold fabrication, as rapid solidification under controlled cooling can improve shape retention during deposition. However, commercial low-temperature DIW systems are often expensive, closed-source, and difficult to customize. Moreover, most require a two-step post-processing workflow involving external freeze-thaw cycles, which can damage structures through mechanical disturbance and temperature gradients, increasing contamination risk. To address these issues, we developed a low-cost, open-source low-temperature 3D printing platform by modifying a commercial FDM printer with custom hardware and upgraded software. It maintains stable − 30 °C ± 1 °C and supports in-situ freezing and freeze-thaw processing. Using a Poly(vinyl alcohol)-lignosulfonate sodium-TEMPO-oxidized cellulose nanofibrils (PVA-LS-TOCNF) hydrogel as the model ink, we achieved stable printing of various patterns and mechanical test specimens, with tensile properties comparable to those from ex-situ freeze-thaw methods. Overall, this platform significantly lowers barriers to low-temperature hydrogel 3D printing and improves accessibility.
✓ 已验证
DOI
PubMed
高影响因子
npj Flexible Electronics
·
2026
·
IF 15.4
Kan Xinyuan,Fan Qian,Guo Wenlan,Sun Chen,Wang Yan,Duan Xuexin,Xue Qiannan
Ocular blood oxygen saturation is critical for detecting vision-threatening and systemic diseases. Existing wearable oxygen sensors are unsuitable for ocular use, and current ocular SpO₂ measurements rely on bulky equipment. This work introduces a flexible plasmonic nano-confinement (PNC) nanowire photodetector, based on a PNC nanowire array consisting of highly aligned and ordered PEDOT:PSS nanowires with embedded gold nanoparticles, for high-sensitivity oxygen saturation sensing. The PNC nanowire array acts as an anode interfacial modification layer, where nanowire-geometry-induced confinement and localized surface plasmon resonance synergistically lower the hole-extraction barrier, suppress interfacial recombination, and enhance photoconversion efficiency. Its flexible and transparent design, combined with a compact backend circuit using wavelet-threshold denoising, enables integration into a smart contact lens for accurate and stable non-invasive ocular oxygen monitoring. In vivo experiments demonstrate that this smart contact lens could provide a simple, non-invasive platform for continuous ocular SpO₂ monitoring, with potential relevance to systemic oxygen-status assessment.
✓ 已验证
产品关联
DOI
高影响因子
International Journal of Oral Science
·
2026
·Vol. 18
·期 1
·50
·
IF 17.6
Liu Xiya,Yuan Zuoying,Wan Zhuo,Yuan Xiaojing,Wang Yue,Gao Yike,Zhang Linxue,Song Rui,Sang Jingyi,Wang Yang,Han Yiming,Zhao Yuming,Wang Cun-yu
Porphyromonas gingivalis ( P. gingivalis ) invades host cells to evade antibiotics, driving the recurrence of periodontitis. However, current clinical treatment strategies remain ineffective in addressing this intracellular invasion by the bacteria. Here, we report a host-directed strategy that blocks bacterial invasion by targeting key host factors, including collagen I (using FT011), lipid rafts (using simvastatin), integrin β1 (using ATN-161), and FAK signaling (using YH-306). Inhibiting these targets significantly reduced P. gingivalis infection in human oral keratinocytes and periodontal ligament stem cells. Crucially, simvastatin restored the osteogenic ability of P. gingivalis -infected PDLSCs. These drugs subsequently functioned as effective antibiotic adjuvants. The combination of simvastatin or YH-306 with metronidazole, a standard-of-care antibiotic for periodontitis, exhibited potent synergistic effects, significantly eradicating intracellular bacteria at reduced antibiotic dosages. In a rat periodontitis model, simvastatin-metronidazole therapy yielded superior outcomes, significantly mitigating bacterial load, inflammation, and alveolar bone loss. The repurposing of clinically available drugs, such as simvastatin, as antibiotic adjuvants represents a promising, readily translatable therapeutic approach for periodontitis.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHINESE JOURNAL OF POLYMER SCIENCE
·
2026
·
IF 4.6
Long Yu-Si,Lu Mei-Yi,Qi Jia-Wei,Chen Geng,Sun Yu,He Xiu-Xia,Zhang Tian-Hui,Cui Li-Guo,Hu Jun-Li,Liu Yi-Chun
Silk fibroin hydrogels frequently exhibit insufficient mechanical strength for biomedical applications. Conventional enhancement strategies often rely on toxic crosslinkers or nondegradable components, thereby compromising biocompatibility and biodegradability. Recently emerged organic solvent-based methods represent an advance, but their associated environmental toxicity remains a concern. In this work, we present a novel thermal oscillation strategy for fabricating high-strength silk fibroin hydrogels exclusively from all-aqueous silk fibroin solutions, eliminating the need for toxic chemicals or non-degradable materials. The resulting hydrogels exhibit outstanding mechanical properties, tensile strength of 2.6 MPa, elongation rate of 152.6%, and toughness of 3.0 MJ/m 3 , which not only surpass the organic solvent-derived silk fibroin hydrogels but also rival the dual-crosslinked, double-networked or composite systems. The silk fibroin hydrogels also exhibit a minimal swelling ratio, outstanding long-term integrity, and excellent biocompatibility. The robust, biocompatible, and biodegradable silk fibroin hydrogels are promising for biomedical applications such as load-bearing tissue scaffolds, long-term implantable drug delivery systems, and durable wound dressings.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2026
·
IF 18.1
Xue Tianrui,Liu Zhongliang,Liu Heng,Li Shiqi,Song Yiting,He Zhen,Shen Yongjun,Zhou Kai,Yin Shixin,Zhang Jian,Huang Jiayan,Shi Yi,Li Hao,Wu Zhen-Yu,Li Huihui,Li Chunzhong,Yu Shu-Hong
The inherent instability of ruthenium oxide in acidic environments, coupled with the persistent activity-stability trade-off, constitutes a fundamental barrier to advancement of proton exchange membrane water electrolyzers. Here we show a cavitation-mediated sonochemical strategy that enables homogeneous substitutional boron doping of ruthenium oxide within minutes under ambient conditions. By substituting lattice ruthenium sites and forming strong covalent boron-oxygen bonds, boron doping enhances the intrinsic activity and stability by optimizing oxygen-intermediate adsorption and suppressing lattice oxygen participation, thereby mitigating catalyst degradation. The resulting boron-doped ruthenium oxide exhibits a low overpotential of 180 mV at 10 mA cm −2 with long-term durability (>3000 h). In proton exchange membrane water electrolyzers, this catalyst achieves industrial current densities (1 A cm −2 at 1.714 V) for over 200 h with a negligible voltage degradation rate of 65.0 μV h −1 . This work demonstrates the potential of cavitation-mediated sonochemistry for synthesizing efficient catalysts with enhanced stability and provides insights into the design of doped oxide materials.
✓ 已验证
DOI
PubMed
高影响因子
Nature Communications
·
2026
·
IF 18.1
Li Qiaodong,Yao Jingming,Wang Yiran,Liu Xinyu,Lei Jiuwei,Yin Wen,Yu Zhixuan,Wang Shaojie,Li Lin,Yan Xinlin,Shao Zongpu,Wang Zhenyu,Xia Wei,Chen Yue,Yu Chuang,Wang Lin,Wen Bin,Xu Bo,Huang Jianyu,Zhang Long
The development of high-energy all-solid-state batteries is critically hindered by the electrochemical instability of solid electrolytes against high-voltage oxide positive electrodes. While fluorination is a promising strategy to enhance electrolyte stability, conventional methods are ineffective, resulting in insufficient fluorine content and a debilitating trade-off with ionic conductivity. Here, we report a solid-state anion-exchange strategy that overcomes these limitations by producing core-shell Li-fluoride/LiCl nanocomposite precursors. These precursors enable the synthesis of heavily fluorinated lithium-halide and lithium-sulfide electrolytes that combine high ionic conductivity with good oxidative stability. This stability originates from the formation of a robust, self-limiting LiF-rich interphase at the positive electrode. Consequently, an all-solid-state battery using a Li-rich oxide positive electrode achieves high performance, retaining over 77.5% capacity after 2000 cycles at a high rate of 3 C (1 C = 275 mA/g) and a 5.0 V cutoff. This anion-exchange approach is broadly applicable to other systems and establishes a versatile platform for designing advanced fluorinated materials for next-generation batteries.
✓ 已验证
DOI
PubMed
高影响因子
Nature Communications
·
2026
·
IF 18.1
Zhang Xin,Li Shuohan,Suo Hao,Zhang Yu,Wang Yu,Li Li,Wang Feng
Rapid and accurate mechanical detection is essential across numerous fields. However, conventional camera-based methods, which depend on computationally intensive analysis of high-frame-rate footage and predictive algorithms, are often time-consuming and can introduce interpretive errors that compromise reliability. Herein, we present a class of near-infrared stress memory emitters, allowing fast and visualized mechanical detection in ambient environments. We develop Ca(Sr)ZnOS:Yb 3+ /Pb 2+ crystals and achieve persistent mechanoluminescence at 981 nm by combinatorial engineering of sub-bandgap states. Deliberate modulation of the persistent mechanoluminescence intensity and duration is achieved through isostructural host blending coupled with prescribed ultraviolet charging, enabling direct capture and visualization of ball impacts with short processing time (0.39 s) and high accuracy. The bright (up to 11 × 10 7 photons per event) and durable (up to 100 s) persistent mechanoluminescence broadens the scope of optical materials in applications such as stress sensors, human-machine interfaces, and mechano-opto-electronics.
✓ 已验证
DOI
PubMed
高影响因子
Nature Communications
·
2026
·
IF 18.1
Tang Linbin,Lu Zechun,Gao Zongyan,Lou Xuechun,Li Junjian,Wen Yujie,Chen Junchao,Zhu Zhexuan,Luo Shijing,Zhou Lina,Wei Guangfeng,Chen Zuofeng,Zhao Hongying,Li Tong,Peng Luming,Li Fengting,Liu Tao
Achieving a reversible four-electron-per-oxygen-molecule oxygen evolution reaction is an essential yet highly challenging task for nonaqueous lithium hydroxide-based Li | |O 2 batteries, as the kinetically sluggish oxygen evolution reaction tends to entangle with competing parasitic reactions, whose origins and mitigating strategies remain largely elusive. Here we construct a highly reversible lithium hydroxide-based Li | |O 2 battery using iron–cobalt–nickel layered double hydroxide catalysts and tetramethylene sulfone-based electrolytes. Lithium hydroxide decomposition toward oxygen evolution involves key reactive oxygen species of surface-bound hydroxyl and hydroxyl radicals, but no singlet oxygen. These hydroxyl species corrode the electrolyte and carbon support, predominantly accounting for charging irreversibility. While oxidation-resistant solvents and electrical conductors are necessary to reduce hydroxyl-induced side reactions, the synergistic interplay of interfacial water solvation and catalytic surface structures hold the key to steering hydroxyl activity toward the desirable oxygen evolution reaction or by-product formation. This work offers insights into achieving long-life lithium hydroxide-based Li | |O 2 batteries.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
POLYMER JOURNAL
·
2026
·
IF 3.1
Chen Meijia,Song Li,Xiang Hengxue,Zhu Liping,Feng Xunda,Yu Senlong,Zhu Meifang
The development of intrinsically photostable polymers through molecular design remains a persistent challenge in materials science. Here, a series of polyethylene terephthalate-1,4-cyclohexanedimethanol (PETG) copolyesters with precisely tailored trans-1,4-cyclohexanedimethanol (trans-CHDM) contents were synthesized via one-pot copolymerization. The successful stereochemical control of CHDM units was verified by 1 H-NMR spectroscopy. For the first time, the structure-property relationship between the trans-CHDM content and the UV-aging resistance of PETG was systematically established. Increasing the trans-CHDM content was shown to increase the glass transition temperature and the thermal stability of the copolyesters. Remarkably, higher trans-CHDM levels led to significantly improved photostability, as evidenced by superior mechanical retention, reduced chain scission, and minimal structural degradation during prolonged UV-irradiation. Mechanistic investigations revealed that the increased UV resistance stems from a narrowed optical bandgap and, more critically, an efficient photothermal conversion pathway. The latter is facilitated by heightened intramolecular friction in high-trans polymers, which promotes nonradiative energy dissipation and effectively mitigates photooxidative damage. Within the series, PETG-40-80% achieves an optimal balance between UV durability and mechanical performance, positioning it as a promising candidate for high-performance, weather-resistant applications. This work highlights the stereochemical control of comonomers as a potent strategy for increasing the photostability of polyester materials.
✓ 已验证
DOI
高影响因子
Nature Communications
·
2026
·
IF 18.1
Chen Yini,Ke Jingwen,Ye Wenbin,Zhou Yuxuan,Song Lei,Hu Weizhao,Geng Zhigang,Hu Yuan
The seawater contains approximately 99% of Earth’s bromide reserves. Therefore, the extraction of bromine from the seawater offers a promising approach to ensure a sustainable supply of bromine. However, the traditional electrochemical extraction method for direct bromine extraction are inapplicable, owing to the low concentration of bromide in seawater (~60 ppm). In this work, we develop an electrolysis-driven styrene enrichment process for efficient bromide recovery from seawater. As for the electrooxidation of bromide, we screen a series of metal phthalocyanines supported on carbon nanotube as the electrocatalysts. Through accelerating the bromine evolution reaction and suppressing the side reaction, nickel phthalocyanine supported on carbon nanotubes exhibit the highest activity with the Faradic efficiency of 97.8% for bromine production among all catalysts. Coupling this catalyst with the ESE process for direct bromine extraction from the Yellow Sea’s seawater, the extraction efficiency of 90.0% is achieved with the product of pure KBr powder. Moreover, the co-produced styrene oxide can be efficiently separated via vacuum distillation, significantly promoting the economic value of this ESE process.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
EYE
·
2026
·Vol. 40
·期 10
·1499-1506
·
IF 4.4
Lingham Gareth,Loughman James,Lee Samantha SY,Repka Michael X.,Kerin Eoin,Gómez Sánchez Alicia,Kobia-Acquah Emmanuel,Nkansah Ernest Kyei,Flitcroft Ian,Mackey David A.
Background To investigate interactions between iris colour and low-concentration atropine on outcomes relevant to clinical myopia management Methods A post-hoc, exploratory meta-analysis of three randomised clinical trials investigating atropine 0.01% or 0.05% eye drops vs placebo: the Western Australian Atropine Treatment of Myopia study, the Myopia Treatment Study and the Myopia Outcome Study of Atropine in Children. Iris colour was graded as brown or not brown (including blue/green/hazel). Change in accommodative amplitude, pupil diameter, spherical equivalent refraction (SER) and axial length were assessed using linear mixed models. Results In participants (baseline ages 5–16 years) using atropine 0.01% ( n = 396), pupil diameter change did not differ by iris colour ( p ≥ 0.15), while accommodative amplitude decreased more in not brown vs brown iris colour groups at month 12 (adjusted difference = −1.07D, 95% CI: −2.02, −0.12, p = 0.03), but not at month 24 ( p = 0.76). Change in pupil and accommodative outcomes with 0.05% atropine ( n = 66) did not differ by iris colour ( p ≥ 0.10). Among not brown iris colour participants, myopia progression was lower in the atropine 0.01% vs placebo group at 24 months (SER: +0.17D, 95% CI: 0.07, 0.26, p < 0.001; axial length: −0.09 mm, 95% CI: −0.12, −0.05, p < 0.001), but not among brown iris colour participants (SER: −0.08D, 95% CI: −0.20, 0.05; axial length: +0.03 mm, 95% CI: −0.02, 0.07). Conclusion Change in pupil diameter and accommodative amplitude with low-concentration atropine largely did not differ between iris colour groups. Among participants using 0.01% atropine eye drops, there was less 24-month myopia progression compared to placebo in participants with blue/green irides, but not with brown irides.
✓ 已验证
DOI
高影响因子
Nature Communications
·
2026
·
IF 18.1
Xing Kun,Han Qi-Ze,Wang Jian-Tao,Huang Lei,Ran Zhaoyu,Yin Li-Juan,Zhong Shao-Long,Lu Jingtong,Wan Baoquan,Wang Xin-Jie,Guo Limin,Bi Ke,Dang Zhi-Min
Polymer-based dielectrics are widely employed in electrostatic energy storage capacitors serving as pulse power supply owing to their lightweight nature and rapid charge-discharge capability. However, their intrinsically low dielectric constant severely limits energy storage density. Although high-dielectric-constant nanofillers are commonly incorporated to enhance permittivity, organic-inorganic interfacial incompatibility often induces particle agglomeration and structural defects. In this work, we propose a confined co-doping strategy for structured polymer dielectrics, wherein BaTiO 3 and Al 2 O 3 nanoparticles are co-doed within the ferroelectric core P(VDF-HFP) of coaxial fibers and undergo self-assembly. This approach simultaneously enhances both energy density and charge-discharge efficiency. As a result, the 1 wt% BaTiO 3 /1 wt% Al 2 O 3 core co-doping composite dielectric achieves a discharged energy density of 19.2 J/cm 3 and a charge-discharge efficiency of 81.0%, and maintains stable performance over 1 × 10 5 cycles under an electric field of 400 kV/mm. This confined co-doping strategy thus provides an effective and scalable route for developing polymer-based dielectrics with high energy density and high reliability.
✓ 已验证
DOI
PubMed
高影响因子