Desalination and Water Treatment
·
2026
·
IF 3.4
Changwei Xiang,Kun Shi,Weiqiang Dong,Huixin Xiong
In this study, ferrihydrite composites of MnO 2 /Fh and PANI/Fh could form from bacterially oxidized Fe(III)-solutions mixing MnCl 2 (Mn/Fe =1) and polyaniline (PANI, 10 mg) at pH 8.0 −10.0, respectively. They could be used to remove P from the (waste)waters. The prepared MnO 2 /Fh wwas identified as Fh, γ-MnO 2 and γ-MnOOH phases by XRD, FTIR and XPS, and the other composite was PANI/Fh. Adsorption processes fitted to the first/second-order rate models and Weber-Morris intraparticle diffusion model (R 2 ranging in 0.920–0.999), and were spontaneous, endothermic and random. Isothermal adsorptions could be well described by Langmuir model (R 2 of 0.991–0.997) and Freundlich model (R 2 of 0.933 −0.979). The maximal P (10 mg/L) adsorption capacities ( Q e ) were 99.3 mg/g (PANI/Fh) and 84.3 mg/g (MnO 2 /Fh), while that of Fh was 53.6 mg/g at pH7.0. There were the wide pH ranges for PANI/Fh (3.0 −11.0) and MnO 2 /Fh (3.0 −8.0), and the presence of CO 3 2- ion declined P removal efficiencies. The main adsorption mechanisms were electrostatic attraction, ion exchange, and surface complexation. Two Fh composites still had the better abilities of treating P-containing neutral river waters after three regenerations. It provides the potential approaches for preparing Fe-composites and removing P using waste bacterial Fe(III)-solutions.
✓ 已验证
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2026
·Vol. 14
·期 2
·121778
·
IF 7.5
Jian-Bo Qu,Guo-Yu Yue,Jian-Ling Zhang,Yuan Yang,Dong Wang,Jia-Le An,Jing Li
The excellent catalytic performance of noble metal nanoparticles (NMNPs) is often hampered by their tendency to agglomerate and poor recyclability, which significantly limits their large-scale industrial use. To address these challenges, anchoring NMNPs onto porous supports has been proposed as an effective strategy, as it not only suppresses their migration and agglomeration but also enhances their catalytic stability and recyclability through strong metal–support interactions. In this study, novel poly (glycidyl methacrylate) @ZIF-8@Au (PGMA@ZIF-8@Au) composite microspheres were fabricated via three steps: gigaporous PGMA microspheres were first prepared via suspension polymerization, followed by the in-situ growth and subsequent etching of ZIF-8 on their surface, and finally, the confined loading of gold nanoparticles (AuNPs) with three different sizes. This designed structure effectively mitigates issues such as nanoparticle aggregation, detachment, and mass transfer limitations. The hierarchical pores of the PGMA microspheres provide a high specific surface area and abundant active sites, while the rich epoxy rings create an electron-rich environment that facilitates electron transfer to the AuNPs. Moreover, ZIF-8 improves the structural stability and biocompatibility of the composite microspheres and promotes the uniform dispersion of AuNPs. The resulting catalyst achieved 100 % degradation of p-nitrophenol (PNP) within 20 min and maintained a conversion of 84.8 % after ten consecutive cycles. Based on the synergistic effects between the composite and the AuNPs, a plausible catalytic mechanism was proposed. This work offers a promising strategy for designing highly efficient catalysts for environmental remediation.
✓ 已验证
产品关联
DOI
高影响因子
ACTA MATERIALIA
·
2026
·
IF 10.7
Qinghu Guo,Ting Wang,Xiangyu Meng,Dongxu Li,Xiaoyi Gao,Zhonghua Yao,Weiping Gong,Huajun Sun,Hanxing Liu,Hua Hao,Shujun Zhang
Piezoelectric actuators are essential components in precision positioning and force generation systems, often operating under complex multiphysics conditions. In this work, soft-type 2.5%Eu-doped 0.52PMN-0.33PT-0.15PZ piezoelectric ceramics with high piezoelectric charge coefficient d 33 = 1030 pC/N and piezoelectric strain coefficient d 33 * = 1120 pm/V were prepared, the electromechanical properties were systematically investigated under varying electric fields, uniaxial mechanical prestresses and temperatures. The results reveal that the strain exhibits a variation of ≈ 50% over the applied mechanical prestress range of 0 - 50 MPa, while showing a variation of < 20% across the tested temperature range 30 - 120°C. This demonstrates that within the tested ranges, mechanical stress is the dominant external factor governing the electromechanical response. With increasing prestress, the strain initially increases—reaching a maximum of 0.150% at 20 MPa—due to stress-assisted non-180° domain switching, and then decreases under higher stress due to domain wall clamping. This behavior reflects a transition from an electric field-controlled regime (< 20 MPa) to a stress-controlled regime (> 20 MPa), where domain wall mobility is suppressed and temperature-dependent phase transition effect is mitigated. Notably, the ceramic achieved a high mechanical work density of 0.040 J/cm 3 with electromechanical conversion efficiency of 46.4% at 40 MPa, while maintaining excellent temperature stability across all prestress conditions. These findings highlight the critical role of domain switching dynamics and stress-temperature coupling in determining actuator behavior, providing valuable design insights for the development of high-performance piezoelectric actuators with improved durability, reliability, and energy efficiency under extreme operational conditions.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Water Process Engineering
·
2026
·
IF 6.6
Cheng Ma,Ziyi Guo,Mushi Li,Wenjing Sang,Muzamil Ali Brohi,Dengxin Li
Emulsified rinsing wastewater from textile industry is difficult to treat due to its stable oil-in-water emulsion. To address the issues of high cost and suboptimal effluent quality in the flocculation-biotreatment process at a textile wastewater pretreatment station, this study systematically compared two improved schemes: enhanced pretreatment (demulsification-flocculation coupled with biotreatment) and enhanced biotreatment (carbon material enhanced anaerobic process). Key operational parameters were optimized through lab-scale experiments. Demulsifier E and biochar showed the best effect respectively. These parameters were validated in a 100-day, 1000 m 3 /d pilot-scale application. Two schemes both achieved better average effluent chemical oxygen demand (COD) than the original process. For comprehensive decision-making, an integrated life cycle assessment (LCA) combined analytic hierarchy process (AHP) model was developed, evaluating in economic, environmental, and technical effectiveness. LCA results indicated the biochar enhanced anaerobic process exhibited the lowest environmental impact, particularly in global warming potential (GWP). AHP weight revealed that technical effectiveness, especially COD removal efficiency, was the primary concern, resulting the selection on biochar enhanced anaerobic process. This study provides both a practical upgrade solution for industrial wastewater treatment plants and demonstrates the value of the LCA-AHP framework in guiding the green transformation of such processes.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Qingxin Ge,Zhou Zhou,Jing Li,Xiangyang Qu,Qiaoqiao Fang,Zhiliang Han,Rongliang Wu,Huaping Wang,Shiyan Chen
Given the widespread availability of low-grade heat (< 100 °C), its conversion into electricity represents a highly promising green technology. Thermo-electrochemical cells (TECs) have garnered significant attention for their potential in low-grade thermal energy harvesting, largely due to their relatively high thermopower. An efficient approach to achieve high thermopower is establish a high and stable concentration gradient (∆C). However, the ∆C construction process is often limited by a false saturation state in conventional I − /I 3 − TECs. To address this issue, we propose a enhancement strategy that utilizes a non-additive ion effect to enhance the free energy of hydrophobic ions. Specifically, the addition of strongly hydrating anions (SO 4 2− ) disrupts the coordination between weakly hydrating I 3 − ions and cations (K + ) by competitively occupying the K + coordination site. The free energy of I 3 − raise effectively and promote the hydrophobic interaction with methyl cellulose (MC), breaking the false saturation state and enabling a significantly greater ∆C. The implement of this strategy gets a high thermopower of 18.41 mV K −1 in this gel-based TECs. Moreover, a module comprising six series-connected devices produce a stable output of 520 mV under a 5 °C temperature difference. This work highlights the untapped potential of traditional systems for efficient thermal energy harvesting, offering a new strategy to overcome this false saturation state.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Xindan Li,Ming Yin,Xincheng Cai,Zhuoying Jia,Hongjiang He,Mingjing Tang,Xiaoqiang Li,Shengquan Yu
Polycrystalline MgF 2 is an attractive mid-infrared laser host material, yet its widespread application in high-power systems is limited by its inferior thermal conductivity compared to single-crystal materials, resulting in inefficient heat dissipation. To address this challenge, we successfully designed and synthesized Fe 2+ : MgF 2 transparent ceramics using a strategic wet chemical coprecipitation method combined with hot-press sintering. This method enables precise Fe 2+ doping within the MgF 2 lattice (Fe x Mg 1-x F 2 , 0.0002≤x ≤ 0.05), with doping effects clearly confirmed by XRD, XPS, and TEM analyses. The resulting ceramics exhibit outstanding mid-infrared transmission properties, with 1-mm-thick samples achieving 90% linear transmittance at 5.7 μm wavelength. More importantly, Fe 2+ incorporation significantly enhances thermal conductivity—peaking at 20.3 W/(m·K), a substantial increase over the baseline value of 11.6 W/(m·K)—while simultaneously raising Vickers hardness to 5.49 ± 0.54 GPa, fulfilling the core design objective. This simultaneous achievement of high optical quality and exceptional thermal management demonstrates that Fe 2+ : MgF 2 transparent ceramics represent a highly promising and reliable candidate material for high-power mid-infrared laser applications.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED ENERGY
·
2026
·
IF 12.2
Zhenhui Hu,Yutong Tan,Kai Yao,Jiashuo Sun,Hengshan Wei,Yu Zhao,Xi Chen,Yi Long,Yongsheng Yang,Jinqing Peng,Yujie Ke
Thermochromic hydrogels have shown promise for smart windows but face challenges such as high thermal emissivity and rapid water loss. This paper reports a scalable hydrogel-based smart window that simultaneously addresses the key challenges of moisture retention, low long-wave infrared emissivity ( ɛ LWIR ), and large-area fabrication. The hydrogel is synthesized by copolymerizing the moisturizing agent sodium pyrrolidone carboxylate (PCA Na) with N-isopropylacrylamide (PNIPAM), forming a stable structure that lowers the phase transition temperature to 25.7 °C and improves water retention by 12% compared to the pure PNIPAM hydrogels. This hydrogel is further integrated with an indium tin oxide (ITO) layer for reduced ɛ LWIR . We produce a large-area smart window demo (40 × 45 cm 2 ), achieving a visible transmittance ( Т lum ) of 69.3%, a solar modulation (Δ Т sol ) of 60.3%, and a low ɛ LWIR of 0.32. To our knowledge, the demo featured with this performance and the water retention character is rarely achieved in previous reports. The demo test proves an indoor temperature reduction of up to 9.0 °C under daytime illumination compared with glass-based window. EnergyPlus simulations further indicate annual Heating, Ventilation, and Air Conditioning (HVAC) energy savings of 44.9%, 46.1%, and 10.1% in Bangkok, Pheonix, and Changsha, respectively, outperforming conventional glazing systems. The integrated design maintains excellent optical performance over 100 cycles and provides a scalable pathway toward practical, energy-efficient building applications.
✓ 已验证
产品关联
DOI
高影响因子
PROGRESS IN ORGANIC COATINGS
·
2026
·
IF 7.9
Changyong Zhao,Hualiang Huang,Xiaotao Zheng
Metal corrosion poses a significant challenge to the sustainable development of industrial society, leading to substantial economic losses and safety risks. Epoxy coatings are widely used for corrosion protection, but their performance is limited by inherent defects, such as micropores and poor long-term durability. In this study, mesoporous hydroxyapatite platelets (mHAp) were synthesized via a hydrothermal method and sequentially modified with an aminosilane coupling agent (3-Aminopropyltrimethoxysilane (KH540)) and the corrosion inhibitor (benzotriazole (BTA)) to develop a functional nanofiller (KH540-mHAp@BTA). The successful synthesis and modification were confirmed by TEM, BET, FT-IR, XRD, XPS, SEM, and TGA. The modified nanofiller was incorporated into an epoxy resin (EP) to fabricate a new type of composite coating. Electrochemical impedance spectroscopy (EIS) and scratch tests showed that the KH540-mHAp@BTA/EP coating exhibited superior corrosion resistance, maintaining a high low-frequency impedance modulus (>10 8 Ω·cm 2 ) after 30 days of immersion in a 3.5 wt% NaCl solution. The coating also showed excellent dispersion, interfacial compatibility, and active protection capability due to the sustained release of BTA. This work highlights the potential of functionalized hydroxyapatite platelets as an efficient nanofiller for advanced anti-corrosion coatings.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED THERMAL ENGINEERING
·
2026
·
IF 7.5
Xiaoyu Song,Xuenong Gao,Ziye Ling,Zhengguo Zhang,Yuyuan Zhuang
This study proposes the combination of copper sulfide‑carbon nanotubes (CuS-CNTs) photothermal material with paraffin/expanded graphite. A flat-plate collector based on this material is also designed. Unlike traditional collectors that integrate phase change materials, the composite phase change material in this design can directly absorb sunlight and store heat. The goal is to reduce heat loss from the collector and improve system stability and efficiency. The novelty of this study lies in the preparation of a composite phase change material with high photothermal conversion efficiency, high thermal conductivity, and good shape stability. This material can realize the integration of photothermal conversion and thermal energy storage inside the collector. Key results show that when the CuS-CNTs content is 10%, the photothermal conversion efficiency of the composite phase change material increases from 61.07% to 94.03%. The total efficiency of the solar water heating system reaches as high as 56%. These results indicate that the addition of CuS-CNTs can significantly improve the photothermal conversion efficiency of the material. The prepared composite phase change material has great application prospects in the field of solar energy. In addition, this work uses numerical simulation for analysis. The optimal parameter combination for the collector is determined as an upper layer material density of 0.8 g/cm 3 , a lower layer material density of 0.8 g/cm 3 , and a thickness ratio of 1:1. These findings provide reference and guidance for the structural design of high-performance flat-plate collectors.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Huanhuan Liu,Xiaolei Fan,Jingyan Huang,ZiXu Wang,Runli Li,Ruoyu Li,Bo Yang,Yan Wang
Dentin hypersensitivity is a globally oral dilemma arising from the exposure of dentinal tubules (DTs), which elicits discomfort upon external stimulation. Due to the complex dentin structure and oral environment, developing a multifunctional repair strategy that combines dentin remineralization, antibacterial properties, and DT occlusion remains highly challenging. Herein, we propose a biomimetic remineralization approach utilizing glycosaminoglycan chondroitin sulfate (CS) to mimic the bioactivity of proteoglycans (GAGs) for modifying collagen fibrils, in conjunction with a zwitterionic poly(carboxybetaine acrylamide) (PCBAA) to stabilize amorphous calcium phosphate (ACP), CS modification not only increases the negative charge density on the collagen but also provides additional nucleation sites, facilitating the binding of calcium phosphate precursors and thereby promoting collagen mineralization. Both in vitro and in vivo experiments demonstrate that the CS-based biomimetic mineralization strategy achieves dense occlusion of DTs and effective remineralization of demineralized dentin. The remineralized dentin exhibits significant antibacterial activity against cariogenic bacteria (e.g., Streptococcus mutans and Lactobacillus acidophilus ), and its mechanical properties can be restored to level comparable to that of sound dentin. Thus, this strategy integrates three key functions, dentin matrix remineralization, effective tubular occlusion, and antibacterial surface modification, offering substantial clinical potential for the effective treatment of dentin hypersensitivity.
✓ 已验证
产品关联
DOI
高影响因子
FUEL
·
2026
·
IF 7.8
Qianqian Chen,Subing Fan,Junmin Lv,Tiansheng Zhao
The purpose of the olefin hydroformylation-hydrogenation tandem reaction for alcohol synthesis is to design a highly efficient and stable heterogeneous catalyst. In this study, a novel heterogeneous magnetic nanoparticle-supported rhodium-cobalt bimetallic core–shell catalyst was prepared, which exhibits excellent synergistic catalytic performance and enables a one-step alcohol synthesis process. The magnetic support Fe 3 O 4 allows for rapid separation of the catalyst from reaction products under an external magnetic field. The 7.5Co0.5Rh/Fe 3 O 4 @SiO 2 magnetic core–shell catalyst was successfully prepared by loading active metals via a one-pot impregnation method and performing silica coating using the Stöber method. It shows outstanding olefin conversion (99.71%) and alcohol selectivity (91.17%). The effect of preparation conditions, process conditions, and the universality of substrates were investigated in detail. The catalyst was reused 5 times, and the performance differences between the core–shell catalyst and the traditional impregnated catalyst with the same support, as well as the differences in metal leaching during the reaction, were compared. In addition, the catalyst could participate in the reaction directly without prior reduction, avoiding the additional costs associated with subsequent reduction steps.
✓ 已验证
产品关联
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2026
·
IF 5.8
Jinzhou Li,Jiayao Lu,Ying Li,Xiaocong Zhu,Zhenwei Liu,Zuchuang Liu,Yushi Ding,Wenlong Huang
Gallium evolution reaction (GER) in alkaline solutions faces significant competition from the hydrogen evolution reaction (HER), leading to reduced reaction selectivity and complicated interfacial kinetics. In this study, a solid gallium cathode was employed to investigate the HER and GER behaviors, nucleation mechanism, and surface passivation characteristics in alkaline solution. Linear sweep voltammetry (LSV) and Tafel polarization analyses revealed that under the conditions of 25 °C, 120 g/L NaOH, and 40 g/L Ga(III), the potential difference between HER and GER was maximized. Furthermore, GER exhibited a significantly lower Tafel slope ( b G = 46.7 mV/dec vs. b H = 240.3 mV/dec), confirming the kinetic dominance of gallium deposition. Electrochemical impedance spectroscopy (EIS) revealed that the charge transfer resistance ( R ct ) decreased significantly with increasing overpotential, indicating that the reaction driving force effectively overcame the interfacial resistance. Chronoamperometry (CA) confirmed that the electrocrystallization of gallium follows the Scharifker-Hill 3D progressive nucleation model. Under diffusion control at high overpotentials, the apparent diffusion coefficient was determined to be 2.58 × 10 –4 cm 2 /s, attributed to the convection effect induced by hydrogen bubbles. In terms of microstructure, SEM and XRD confirmed that within the optimal potential range of -1.64 V to -1.72 V, the deposits exhibited a layered stacking morphology and a strong (111) preferred orientation. XPS analysis revealed a mixed passivation film composed of Ga 2 O 3 and Ga(OH) 3 on the electrode surface, which acts as a physical barrier effectively inhibiting HER. This study deeply elucidates the kinetic mechanism of gallium electrodeposition in alkaline solution, providing a theoretical basis for regulating the electrodeposition behavior of metallic gallium based on kinetics.
✓ 已验证
产品关联
DOI
高影响因子