CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Jia Yang,Xiancheng Song,Xinlei Shi,Yan Wang,Lin Zhu,Wenzhan Tu,Qiang Chen
The electrical signals recorded from the human epidermis, play a crucial role in the diagnosis of neuromuscular disorders, as well as in the development of human-computer interaction and brain-computer interface technologies. However, traditional dry electrodes exhibit high contact impedance and are susceptible to motion artifacts, whereas the conductive gel used in wet electrodes tends to dry out and may induce skin irritation. Based on these considerations, a thermo-reversible conductive hydrogel based on gelatin/betaine was proposed in this study. The hydrogel demonstrates distinct thermo-reversible phase transition behavior, with gel-sol (~55.3 °C) and sol-gel (~36.8 °C) transition temperatures closely aligned with the physiological skin temperature range. Notably, it can undergo rapid gelation within 60 s and achieve excellent conformal contact with the skin surface. This hydrogel has demonstrated successful application in the acquisition of sEMG and EEG signals from glabrous human skin. This study presents a novel, simple, and highly effective user-friendly strategy to overcome the challenge of poor contact between traditional electrodes and irregular skin surfaces, thereby demonstrating significant potential for applications in wearable health monitoring and soft human-machine interfaces.
✓ 已验证
产品关联
DOI
高影响因子
Acta Pharmaceutica Sinica B
·
2026
·
IF 14.6
Luyao Yu,Yingxia Guo,Tonghe Liu,Yunlong Sheng,Meichen Liu,Ning Zhang,Jiye Tian,Chunpeng Feng,Meiyun Shi,Lei Yin
Paclitaxel (PTX) has poor aqueous solubility and vehicle-related toxicity. Polymeric micelles (PMs) can improve solubility and leverage the enhanced permeability and retention (EPR) effect for tumor targeting. However, a comprehensive understanding of their in vivo fate remains limited, due to the inability to distinguish between encapsulated and released drug. We developed a novel method integrating stable isotope tracing, ultrafiltration, and ultra-performance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) to quantify free, released, and total PTX, the polymeric carriers methoxy-poly(ethylene glycol) (molecular weight ∼2,000 Da) (mPEG2K) and methoxy-poly(ethylene glycol)- block -poly(D,L-lactic acid) (mPEG block MW ∼2000 Da, PLA block MW ∼2,000 Da) (mPEG2K–PLA2K) in rats following administration of PTX injection and paclitaxel-loaded polymeric micelles (PTX-PMs). PTX-PMs significantly altered the pharmacokinetics, reducing the initial dose–normalized initial plasma concentration ( C 0 /Dose) of free PTX to 27.0% of that from the injection. Altered tissue distribution was observed, with high accumulation in reticuloendothelial system (RES) organs and more complete clearance by 48 h. Excretion studies revealed a substantially higher cumulative fecal excretion of PTX after PTX-PMs administration, while the polymer carrier was predominantly excreted renally as mPEG2K. These findings provide critical insights into the in vivo disposition of PTX nanoformulations, supporting the rational design of PMs-based delivery systems.
✓ 已验证
产品关联
DOI
高影响因子
DESALINATION
·
2026
·
IF 9.9
Jiarong Luo,Jinmin Zhao,Zhensheng Yang,Hao Li,Xiufang Wen,Pihui Pi,Shouping Xu
A Janus polyelectrolyte hydrogel-fabric coupled evaporator PCMZ was prepared by coating method, which can stably and efficiently carry out interfacial solar desalination. The evaporator is supported by hydrophobic polystyrene foam (EPS), and the heat loss from the evaporator to the bottom water is reduced. Thin absorbent cotton and fabric were used as water transport channel, and polyvinyl alcohol/chitosan/polyacrylamide/polymethylacryloxyethyl trimethyl ammonium chloride (PVA/CS/PAAM/MTAC) was coated on the surface of the fabric to polymerically crosslink into hydrophilic gel layer. Finally, three-dimensional gel-fabric evaporator PCMZ was prepared by hydrophobic modification with benzaldehyde on the surface of the hydrophilic gel layer. The performance of PCMZ with different heights was tested, and the water transport capacity, thermal management, evaporation rate and the center of gravity in practical application were comprehensively considered. Finally, PCMZ with a height of 3 cm was selected for further experiment. The test results show that the expanded three-dimensional evaporation surface is beneficial to optimize thermal management and reduce heat loss, and the mechanical properties of PCMZ are enhanced. Because of the synergistic effect of these three parts of PCMZ, the overall seawater evaporation efficiency can reach 3.44 kg·m −2 ·h −1 . It can continue working in saline water with a salt content of 15%, and the evaporation efficiency can reach 2.75 kg m −2 h −1 . Moreover, PCMZ exhibits excellent mechanical properties due to the toughness of many slender fibers and the hydrogen bonding between polymers in the gel layer, and it can also be stable after ultrasonic, acid and alkali leaching. The results showed that, PCMZ is stable, efficient and easy to manufacture, showing great potential in industrial and agricultural applications.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2026
·Vol. 17
·期 1
·1909
·
IF 15.7
Yang Bin,Li Deyang,Deng Renren,Zhao Jian,Wang Yubin,Xu Shiqing,Lei Lei
Persistent luminescence materials are promising for night-vision displays, background-free medical diagnostics, and high-resolution radiography, yet achieving efficient violet, yellow, and red emission within a single robust and scalable host remains a longstanding challenging. Here, we overcame this limitation by constructing Gd 3+ -mediated cluster traps within alkaline-earth fluorochlorides to minimize energy loss during electron migration. These clusters serve as both intrinsic emitters and efficient energy transfer platforms for various activators, including Eu 2+ , Sm 2+ , Tb 3+ , and Mn 2+ , enabling bright and spectrally tunable multicolor persistent luminescence upon X-ray irradiation. The persistent luminescence intensity of Eu 2+ is enhanced by up to 32.7-fold upon Gd 3+ codoping. Moreover, violet persistent luminescence from Eu 2+ is employed to excite perovskite quantum dots for full-color time-domain dynamic displays, while Sm 2+ emission facilitates low-dose, high-resolution delayed X-ray imaging. These findings establish a generalizable strategy for designing efficient multicolor persistent materials for advanced multifunctional optical technologies.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Juntao Shi,Zhujun Yao,Jiayuan Xiang,Hongliang Zhang,Jianhao Huang,Fangfang Tu,Jipeng Fu,Chenjie Lou,Tianyi Sun,Yuhong Zhang,Qixiang Jia,Lihao Zheng,Weilin Yao,Yefeng Yang
Halide solid-state electrolytes have garnered significant research interest due to their well-balanced attributes, including considerable ionic conductivity, high oxidation stability, and favorable mechanical deformability, making them promising for all-solid-state batteries. In this study, we develop a cost-effective Li 2+2 x Zr 1- x Mn x Cl 6 ( x = 0, 0.015, 0.025, 0.035, 0.045) solid electrolyte series via a gradient ball-milling strategy, distinguishing our approach from conventional rare-metal-based halide electrolytes. The optimized composition, Li 2.05 Zr 0.975 Mn 0.025 Cl 6 , achieves a high ionic conductivity of nearly 1 mS·cm −1 at 30 °C. Nuclear magnetic resonance (NMR) spectroscopy and bond valence site energy (BVSE) calculations collectively reveal that moderate Mn 2+ doping effectively modulates the lithium-ion occupancy within the Li 2 ZrCl 6 framework and promotes a transition of the Li + transport pathway from one-dimensional to three-dimensional, thereby significantly accelerating Li + mobility. Consequently, solid-state batteries incorporating the designed Li 2.05 Zr 0.975 Mn 0.025 Cl 6 electrolyte demonstrate good rate capability and cycling stability, along with excellent interfacial compatibility with uncoated LiNi 0.8 Mn 0.1 Co 0.1 O 2 cathodes.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Runyue Li,Daolei Lin,Zheng Zhao,Guofeng Tian,Shengli Qi,Dezhen Wu
Addressing the structural shrinkage during high-temperature imidization (>300 °C) of polyimide (PI) aerogels is a critical challenge for enhancing their thermal insulation and electromagnetic wave-transparent performance in aerospace applications. Herein, a thiazine/imidazole in-situ co-catalyzed low-temperature imidization strategy is developed for the first time, by which PI aerogel with nearly “zero” shrinkage is successfully prepared. This method works by introducing 2,4-diamino-6-[2-(2-methyl-1-imidazolyl) ethyl]-1,3,5-triazine (2MZ-AZINE), whose dual amino groups not only construct a crosslinked network with polyamic acid chains but also precisely anchor catalytic groups onto the side chains, thereby enabling highly efficient low-temperature cyclization. Experimental results indicate that cyclization temperature is reduced from conventionally over 300 °C to 200 °C, consequently reducing shrinkage of PI aerogel significantly from 30.6% to 3.1%. Correspondingly, the 2MZ-AZINE-PI aerogel achieves low density (4.74 mg cm −3 ), super-hydrophobicity (152.7° water contact angle) and low thermal conductivity (25.3 mW m −1 K −1 ). Thermal insulation tests show that the 2 cm-thick 2MZ-AZINE-PI controls the surface temperature to be less than 62.3 °C after 20 min on a 200 °C hot stage (versus 72.8 °C for common PI aerogel), demonstrating superior thermal protection. Moreover, 2MZ-AZINE-PI exhibits record-low dielectric constant in the X-band (8–12 GHz), remarkably close to that of air, with permittivity of 1.004 and loss tangent of 8 × 10 −4 , confirming its exceptional electromagnetic wave-transparent properties. This work establishes a practically useful new paradigm for designing integrated thermal protection/electromagnetic wave-transparent PI aerogel materials for potential aerospace applications.
✓ 已验证
产品关联
DOI
高影响因子
LWT-FOOD SCIENCE AND TECHNOLOGY
·
2026
·
IF 7.1
Mengna Zhang,Qinchao Zhu,Tingmei Chu,Wei Xia,Hualing Xie,Jianchang Jin,Gongshuai Song,Xichuang Guo,Jinyan Gong
Peimine (P) and curcumin (CM) possess significant bioactivities but suffer from poor water solubility, low bioavailability, and limited stability. To address these challenges, P-CM self-assembled microparticles (SMPs) were prepared via non-covalent interactions and systematically characterized. The results demonstrated that optimal self-assembly reaction conditions occurred at pH 9, 25 °C, and a P:CM molar ratio of 1:1, yielding uniform nanoparticles (284 nm, PDI = 0.202) with a zeta potential of −19.77 mV. P-CM SMPs exhibited superior antioxidant activities, with ABTS, DPPH radical scavenging activity and FRAP values of 62.69%, 34.18%, and 81.02%, respectively, as well as enhanced anti-inflammatory activity compared to their individual components. To further improve stability and control release, the P-CM SMPs were encapsulated in a hollow zein-chitosan (HZ-CH) composite, achieving high encapsulation efficiency (96.0%). HZ-CH-SMPs exhibited storage stability over time and sustained-release behavior under simulated gastrointestinal conditions. This study provides a theoretical basis for designing delivery strategies integrating molecular self-assembly and protein-polysaccharide encapsulation to overcome solubility and bioavailability limitations of bioactive compounds in functional foods.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2026
·
IF 18.1
Xu Shao-Wen,Liu Wei,Zhu Xu,Hong Zhuozheng,Qian Lisheng,Cheng Chen,Chen Kai,Zhang Liang,Ma Chuansheng,Liu Mengting,Shi Le,Xiao Yao,Dou Shi-Xue,Cheng Yonghong,Wang Peng-Fei
Fast-charging capabilities of sodium-ion batteries have emerged as a pivotal objective within the energy storage fields. Sodium layered P2-type oxide positive electrodes are considered promising for fast charging due to their inherent fast Na + mobility. However, their electrochemical polarization and interfacial charge transfer especially at high state of charge are limiting factors in quick kinetic response for large current. Herein, we demonstrate that a typical P2-type positive electrode (Na 0.7 Ni 0.27 Mn 0.53 Cu 0.04 Fe 0.08 Ti 0.08 O 2 ) achieves high-rate capacities through avoiding octahedral stacking faults, maintaining lattice oxygen activity and controlling anion-specific adsorption. The intermediate Z-phase intergrowth structure mitigates kinetic polarization and thermodynamic hysteresis by simultaneously suppressing the unfavorable phase evolution from P2-type to O2-type and irreversible oxygen redox. The potential-dependent competitive adsorption mechanism between anions and solvent molecules is revealed within the inner Helmholtz plane, where optimized anion-specific adsorption elevates potential difference between electrodes and inner Helmholtz plane, accelerating charge transfer across the electrode/electrolyte interface. Furthermore, the F-rich cathode/electrolyte interphase generated from inner Helmholtz plane mitigates transition metal dissolution and surface lattice collapse for stable long-term cycling. This study highlights the synergistic coupling interaction between bulk phase stability and interfacial environment optimization in ensuring fast Na + /charge transport kinetics for sodium-ion batteries.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FUEL
·
2026
·
IF 7.8
Qiang Leng,Feilong Li,Yuelong Niu,Ziyun Song,Xiuzhen Li,Jiangli Wang,Lin Wang,Xi Wu
Reverse electrodialysis (RED) can efficiently convert the salt gradient energy between salt solutions of different concentrations into electrical energy, hydrogen energy, and other energy forms. Salt solutions in nature usually contain various components, and different types of ions will significantly affect the performance of RED. This study presents a novel RED reactor capable of simultaneously promoting hydrogen evolution and wastewater degradation drived by nature solution. The research investigates the transmembrane transport properties of various ions driven by different anion systems (Cl - , HCO 3 – , CO 3 2– , SO 4 2- ) and examines their impact on hydrogen production and acid orange (AO7) degradation performance. The research results show that the monovalent anion (Cl - and HCO 3 – ) systems exhibit superior electrochemical performance. Furthermore, increasing both the concentration ratio of the working solution and the current enhances the transmembrane transport ability of the ions. The differences in transmembrane transport capacity among different anions will also impact the actual strength of the output current. Finally, the Cl - system demonstrates the greatest hydrogen evolution and degradation performance with 0.10 L·h −1 and 99.38%, respectively. The hydrogen evolution efficiency of the HCO 3 – system is maximized at 9.76%. In addition, In a mixed ion environment, the maximum hydrogen production and AO7 degradation rate of the RED system decreased by 35% and 32.27% respectively compared to the single Cl - system. This study provide crucial theoretical insights for applying RED technology in real-world aquatic environments.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Ning Chen,Xingchen He,Junhui Shao,Dingyu Qiu,Yaning Gong,Najun Li,Dongyun Chen,Ying Zheng,Jianmei Lu
Efficient and recyclable piezoelectric polymers are promising materials for environmental purification and energy regeneration. In addition to the most widely studied polyvinylidene fluoride (PVDF), chiral poly-L-actic acid is an attractive biodegradable alternative that also exhibits piezoelectricity when highly oriented and polarized through electrospinning. In this work, highly-oriented electrospun fibers of poly-L-lactic acid (PLLA) doped with the dopamine-modified barium titanate (HBTO) are fabricated and subsequent hydrophilic modification yields a piezocatalytic membrane (HBTO@HPLLA) rich in catalytic active sites. The interfacial interaction between HBTO and PLLA is enhanced via hydrogen bonding, significantly improving the piezoelectric activities of the resulting composite membrane. Consequently, HBTO@HPLLA degrades Bisphenol A (BPA) in water under ultrasonic vibration at a rate constant 4.3 times higher than pure PLLA. Furthermore, when adhered to the blades of a propeller with mechanical stirring at 1200 rpm, the HBTO@HPLLA membrane also demonstrates high efficiency in BPA removal. This approach offers a promising strategy for developing biocompatible piezoelectric materials utilizing natural low-frequency mechanical energy for environmental remediation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nature Communications
·
2026
·
IF 18.1
Zhang Liangshutong,Zhang Yupu,Li Xinyu,Han Donghao,Xu Shuchang,Zhai Wei,Wang Jianyuan
The flexibility and intelligent responsiveness of hydrogel robots offer great potential for exploration in narrow and complex environments. However, the integration of sensors with hydrogel robotic bodies remains challenging. Inspired by marine organisms, this paper presents an anemone-like light-driven hydrogel robot (ALHR) for directional infrared radiation detection. We fabricated via ultrasonic-assisted stacking a black phosphorus/tungsten disulfide (BP/WS 2 ) moiré superlattice, showing high dual-mode photothermal-photovoltaic conversion performance. Based on this, a composite poly(N-isopropylacrylamide) (PNIPAM) hydrogel was used to build the base plate and tentacle structures of the ALHR. Specific illumination was found to trigger the photothermal effect of the BP/WS 2 moiré superlattice, allowing for directional movement. When the tentacles retract and contact the bottom electrode, photocurrent signals are conducted for infrared detection. The ALHR can work in specialized spatial environments, providing a promising method for early overheating fault identification in equipment. This study proposes a universal design framework for multifunctional hydrogel robots by integrating responsive units with driving units to leverage the synergistic effects of multiple materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2026
·
IF 9.1
Haiming Gu,Minyu Yu,Peng Xu,Shanhui Zhao,Siwen Zhang,Yadong Yu
Integrated CO 2 capture and dry reforming of CH 4 (ICC-DRM) is an effective approach to mitigate CO 2 emissions while producing syngas, with dual-functional material (DFM) as the core. CaO-Ni/CeO 2 DFM shows great potential for ICC-DRM application, but the impact of synthesis methods on its' structure and performance remains unclear. In this study, CaO-Ni/CeO 2 was prepared via solution combustion (SC), wet ball-milling (WM), and co-precipitation (CP), characterized by XRD, BET, SEM-EDS TEM, TGA and H 2 -TPR. The ICC-DRM performance was evaluated in a fixed-bed reactor. The SC sample exhibited the most favorable surface structure, with well-developed porosity and uniform elemental distribution, achieving the highest CO 2 capture capacity (152 wt% at 650 °C), achieving the highest CO 2 capture capacity (152 wt% at 650 °C) The WM sample showed intermediate properties, while the CP sample had a dense morphology and elemental aggregation leading to poor performance. Elevated temperature (675–700 °C) promoted WM/CP reactivity (still lower than SC at 650 °C), but caused severe performance degradation and increasing carbon deposition (21% for WM and 37% for CP after 10 cycles), while the SC sample maintained stability. Further optimization confirmed 5% Ni as the optimal loading for SC-DFM, achieving 95%–97% CH 4 conversion and a stable H 2 /CO ratio (∼1) at 650 °C. This study clarifies the regulatory effect of synthesis methods on DFM structure-reactivity relationship, identifying SC as the optimal strategy for high-performance ICC-DRM materials.
✓ 已验证
产品关联
DOI
高影响因子