ULTRASONICS SONOCHEMISTRY
·
2026
·
IF 10.2
Zijun Wang,Huan Li,Hanlu Yu,Xinyao Wang,Jia Guo,Jia Qing,Haiying Yang,Xiaoqing Xiao,Rongrong Wang,Yang Shan,Shenghua Ding
Curcumin (Cur) is a hydrophobic phenolic compound with superior biological activity, but the limited water solubility, chemical instability, and poor bioaccessibility of curcumin restrict its application. This study developed pea protein isolate (PPI)-folic acid (FA) covalent complexes as nanocarriers for the encapsulation, protection, and precise delivery of curcumin. The results of SDS-PAGE, XPS, and FTIR demonstrated that covalent complexation between PPI and FA was formed through an ultrasound-assisted free radical grafting method. Notably, ultrasonication for 15 min (PPI-FA-US15) achieved a higher FA loading capacity (44.78 ± 0.37 µg/mg) than the traditional free radical grafting for 24 h (36.45 ± 0.43 µg/mg). The ultrasonic treatment and covalent complexation of FA greatly improved the solubility of PPI (from 61.34 ± 0.67% to 97.02 ± 0.88%). Curcumin was efficiently encapsulated within the core of PPI-FA-US15 conjugates to form PPI-FA15-Cur nanocomplexes by hydrogen bonding and hydrophobic interaction. The complexation of FA improved the binding affinity of PPI for curcumin. PPI-FA15-Cur demonstrated a 1.97-fold superior loading capacity for curcumin compared to PPI-Cur. Meanwhile, PPI-FA15-Cur displayed a spherical morphology, and maintained a stable particle size distribution during 77-d storage. The heating stability, photochemical stability and antioxidant property of curcumin were significantly improved. Furthermore, in vitro digestion studies demonstrated that PPI-FA15-Cur showed a sustained release of curcumin. The bioaccessibility of curcumin within PPI-FA15-Cur was about 4.75-fold and 1.11-fold higher than that of free curcumin and PPI-Cur, respectively. This study provides a promising approach for developing plant protein-based carriers that enable precise delivery of curcumin in functional foods.
✓ 已验证
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Tingyu Chen,Ziwen Ying,Long Ding,Jun Liu,Zhen Shang,Shengming Xu,Yinghe Zhang
With the rapid development of the electric vehicle market, recycling of spent batteries will undoubtedly become an urgent issue to be addressed. Conventional batteries recycling method regarded graphite as a waste by-product rather than a valuable functional material, leading to its degradation during high-temperature or chemical processes aimed at metal recovery. From the perspectives of environment and economy, recovering graphite from used lithium-ion batteries is of utmost importance. This study presented a microwave-assisted phosphoric acid leaching technique, which can rapidly and economically recovery degraded graphite. The synergistic effects of microwave radiation and mild phosphoric acid leaching could effectively remove metal impurities and repair graphite structural defects, leading to an excellent electrochemical performance. The regenerated graphite providing a reversible capacity of 368 mAh g −1 after 100 cycles at a 0.2C current, with an enhanced capacity retention rate of 99.9%. This technology avoids the traditional energy-intensive graphitization process and the use of strong acid, thus establishing an industrial-feasible and environmentally friendly closed-loop graphite recycling model.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Water Process Engineering
·
2026
·
IF 6.6
Peng Yu,Lichao Deng,Zhiguo Wang,Chun Zhang,Qiongchao Wang,Wei Huang
The substantial accumulation of cadmium (Cd)-laden adsorbent waste poses significant ecological risks. Transforming this waste into value-added materials presents a promising strategy to mitigate environmental challenges. Herein, a facile method converts spent Cd-bearing alkali lignin biochar (Cd-enriched ALB) into cadmium oxide (CdO-W) via one-step calcination in air for the highly efficient removal of tetracycline hydrochloride (TCH). This approach addresses the challenge of safe disposal and resource recovery of spent Cd-laden biochar. By utilizing the biochar matrix as a dispersive template to inhibit nanoparticle agglomeration and the CO 2 released during its pyrolysis as a synergistic gaseous foaming and etching agent, a hierarchical porous structure with a high specific surface area is constructed. The resulting CdO-W exhibits a remarkable adsorption capacity of 1260 mg/g for TCH at pH 7, which is 55.9% higher than that of chemically synthesized CdO-S (808 mg/g). This superior performance is attributed to the unique synthesis route where the biochar matrix acts as a dispersive template to prevent CdCO 3 nanoparticle agglomeration, while the CO 2 released during its pyrolysis synergistically acts as a gaseous foaming agent and etchant. This process creates a hierarchical porous structure with a high specific surface area, exposing abundant active sites. Mechanistic investigations reveal that adsorption proceeds primarily through coordination complexation, hydrogen bonding, and electrostatic interactions. This work provides a feasible path for the resource utilization of Cd-rich hazardous waste and offers insights for designing cost-effective, high-performance functional materials from other spent heavy-metal adsorbents.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Advanced Research
·
2026
·
IF 17.1
Liu-Jie Qi,Zhao-Qi Zhang,Zhong-Na Zhang,Jing-An Li,Shao-Kang Guan
Introduction Magnesium (Mg) alloys, with favorable mechanical properties, biodegradability, and biocompatibility, are promising materials for cerebrovascular stents. However, rapid degradation, delayed endothelialization, and ischemia–reperfusion-induced microvascular injury limit their clinical application. Objectives This study aims to develop a composite coating that integrates corrosion inhibition and drug delivery functions to achieve degradation regulation, rapid endothelialization, and vascular protection of Mg-based cerebrovascular stents. Methods The optimal corrosion inhibitor was screened from nineteen amino acid-derived Schiff bases using quantum chemical calculations and corrosion inhibition experiments. The selected Schiff base was immobilized on the Mg alloy surface via silane modification to construct a corrosion-resistant coating (Silane-loaded tryptophan Schiff base coating, defined as PMSB-X), whose performance was evaluated by electrochemical measurements and immersion tests. Subsequently, a carbon quantum dot-mediated nanodrug layer (NP-X) integrating sulfonated hyaluronic acid (S-HA) and Shenmai injection (SMI) was structured via ultrasonic atomization. The biological performance of the coating was systematically assessed through in vitro cell studies and in vivo animal experiments. Results Tryptophan-derived Schiff base (SB-Trp) exhibited the highest corrosion inhibition efficiency (81.5%). The PMSB-5 coating constructed based on SB-Trp reduced the corrosion current density of Mg alloy to 9.96 × 10 -9 A·cm −2 , indicating significantly enhanced corrosion-inhibition capability and effective regulation of degradation kinetics. The NP-10 coating exhibited multiple biological functions, including reducing the hemolysis rate, inducing macrophage M2 polarization, inhibiting the proliferation of smooth muscle cells (SMCs) while promoting their contractile phenotype, and promoting the growth of human umbilical vein endothelial cells (HUVECs). Furthermore, the coating activated human cerebral microvascular endothelial cells (HCMECs), indicating pro-angiogenic potential. Animal experiments confirmed that the NP-10 coating simultaneously achieved degradation regulation and suppression of tissue hyperplasia and inflammation. Conclusion This bifunctional coating enables delayed Mg degradation, promotes endothelialization, and provides neurovascular protection, provides an important strategy for promoting the functional design of neurovascular treatment devices.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
DESALINATION
·
2026
·
IF 9.9
Narendra Basel,Jianquan Luo,Guozhu Wang,Yinhua Wan
Oilfield-produced water (OFPW), a major byproduct of hydrocarbon extraction, is highly saline and contains elevated concentrations of divalent ions, such as calcium (Ca 2+ ), posing significant challenges for its treatment, transportation, and reuse. Nanofiltration (NF) membranes offer an energy-efficient solution for OFPW treatment by selectively rejecting multivalent ions while allowing monovalent ion transport; however, conventional NF membranes often suffer from limited Ca 2+ rejection and severe fouling. In this study, a polyamide NF membrane with an engineered spatial charge distribution was fabricated via mixed-monomer interfacial polymerization using piperazine and polyethyleneimine, assisted by a dodecyl phosphate (DDP) surfactant. The resulting membrane features a negatively charged front surface and a positively charged rear surface, forming a dual-charged configuration. This structure integrates Donnan repulsion from the positive sublayer and size-sieving effects, leading to enhanced ion selectivity and antifouling performance. Compared with commercial NF270 and DL membranes, the fabricated membrane achieved significantly higher Ca 2+ rejection (98.95%) and Na + /Ca 2+ selectivity (21.44), while maintaining competitive water permeability and reduced fouling during treatment of both simulated and real OFPW. These results demonstrate that tailoring spatial charge distribution in NF membranes is an effective strategy for improving ion selectivity and fouling resistance in high-salinity water treatment applications.
✓ 已验证
产品关联
DOI
高影响因子
POLYMER DEGRADATION AND STABILITY
·
2026
·
IF 8.1
Hankun Lv,Hongsheng Xu,Qiwei Wang,Xu Chang,Weizhao Hu,Lei Song,Fukai Chu,Yuan Hu
Polyethylene (PE) exhibits aggravated fire hazards under sub-atmospheric conditions due to pressure-induced alterations in pyrolysis kinetics and volatile-release behavior. In this work, a pressure-adaptive flame-retardant PE composite was constructed by introducing an MXene-anchored Co 3 O 4 nanohybrid. The FRPE-MXene/Co 3 O 4 composite shows superior flame-retardant and thermal stability compared with other systems. Its total heat release (35.4 MJ/m 2 ) is 46.29% lower than pure FRPE (66.0 MJ/m 2 ). The reduced total CO release (0.77 g), 65.99% increase in residual mass, together with an approximately 20% reduction in smoke density, confirms the enhanced carbonization capability and improved fire safety performance of the material. Moreover, the LOI value reaches 29.6 ± 0.48%, higher than FRPE-MXene (27.1 ± 0.63%) and FRPE-Co 3 O 4 (27.8 ± 0.63%), demonstrating the enhanced flame-retardant efficiency of the hybrid filler system. Microscopic and XPS analyses reveal that the nanohybrid facilitates deeper deoxygenation, enhanced aromatization, and the formation of dense, graphitized char, thereby significantly improving the structural integrity of the condensed phase. Conventional flame-retardant polyethylene exhibits unstable pyrolysis and incomplete oxidation under low-pressure (55 kPa) combustion, leading to excessive hydrocarbon release and poor char formation. SVUV-PIMS analysis shows that introducing the MXene/Co 3 O 4 hybrid system effectively suppresses radical-induced chain scission and enhances char formation, thereby improving combustion stability and flame-retardant efficiency under low pressure. These findings establish a dual catalytic-barrier flame-retardant mechanism, wherein MXene enables efficient heat dissipation and volatile confinement, while Co 3 O 4 promotes redox-driven carbonization. This work provides an effective strategy for designing high-performance flame-retardant polymers suited to low-pressure environments.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Yue Li,Peihua Li,Rufeng Tian,Xingzi Bian,Jian Wang,Rui Li,Wanggang Zhang,Jiancheng Wang,Yiming Liu
Photoelectrochemical (PEC) seawater splitting offers a sustainable route for hydrogen production; however, it is challenged by the corrosion and sluggish kinetics of photoanodes in chloride-rich electrolytes. To overcome this, we developed a bimetallic metal-organic framework (MOFs) structure with oxygen vacancies (O V ) on TiO 2 nanorods, denoted as (DA)Ni/Mo–MOFs@TiO 2 . This photoanode achieved a high photocurrent density of 2.21 mA·cm −2 and H 2 production rate of 36.07 μmol·cm −2 ·h −1 in real seawater. Notably, it undergoes in situ reconstruction during the oxygen evolution reaction (OER), forming catalytically active Ov–NiOOH accompanied by a protective MoO 4 2− layer. In situ Raman and X-ray photoelectron spectroscopy (XPS) directly revealed the reconstruction process and interfacial adsorption. Density functional theory (DFT) calculations further demonstrated that the reconstructed surface selectively stabilized *OH intermediates (E ad = −4.26 eV), thereby enhancing the OER selectivity and corrosion resistance. This system demonstrated exceptional stability, exhibiting minimal faradaic efficiency loss (1.2–2.3%) in high chloride ion environments (0.7–1 mol/L NaCl). This study provides a novel strategy for designing durable photoelectrodes via pre-catalyst reconstruction.
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Dongyan Yu,Yong Zhang,Changrong Zhou
Achieving a high piezoelectric coefficient ( d 33 ) together with a relatively large depolarization temperature ( T d ) in Bi 0.5 Na 0.5 TiO 3 -based (BNT-based) ceramics remains challenging due to the inherent seesaw effect between T d and d 33 , where an enhancement in one typically compromises the other. Herein, an effective strategy of designing the two-step sintering is proposed to build the multi-shaped ferroelectric domains to broaden the phase transition peak between ferroelectric state (FEs) and relaxor state (REs), thereby circumventing the temperature-driven ferroelectric pinching behavior in 0.93Bi 0.5 Na 0.5 TiO 3 -0.07BaTiO 3 ceramic. By this strategy, the BNT-7BT ceramic exhibited a marked increase in T d from 77 °C to 110 °C, alongside excellent temperature stability in the real-time d 33 (the d 33 increases only from 190 pC/N to 200 pC/N over the temperature range of 30-100 °C). High d 33 originates from the morphotropic phase boundary (MPB) with the coexistence of rhombohedral ( R 3 c ) and tetragonal ( P 4 bm ) phases, as well as refinement of ferroelectric domains. The enhanced thermal stability arises from an appropriate R3c/P4bm phase ratio and the broader FEs-REs phase transition peak. Therefore, this work presents a viable avenue for mitigating the seesaw effect between T d and d 33 in BNT-based piezoceramics.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Yunlong Hu,Sanqi Yang,Wenyan Zhong,Zhiguo Wang,Zhenggang Rao,Longlong Shu,Chunchun Li
Two garnet-type microwave dielectric ceramics, Ca 3 M 2 GeV 2 O 12 (M = Zn, Cu), were successfully synthesized via the conventional solid-state reaction method. Their sintering behavior, microstructural characteristics, and microwave dielectric properties were systematically investigated. Phase purity was confirmed through XRD pattern analysis and Rietveld refinement, which indicated single-phase formation for both compositions. Scanning electron microscopy (SEM) observations revealed that both samples achieved dense microstructures with relative densities >96% at their respective optimal sintering temperatures. The Ca 3 Zn 2 GeV 2 O 12 ceramic sintered at 1120 °C exhibited excellent microwave dielectric properties with a relative permittivity ( ε r ) of 11.66 ± 0.2, a quality factor ( Q × f ) of 61,849 ± 500 GHz, and a temperature coefficient of resonant frequency (τ f ) of −73.41 ± 0.7 ppm/°C. In comparison, the Ca 3 Cu 2 GeV 2 O 12 ceramic demonstrated a significantly lower sintering temperature of 930 °C and inferior dielectric properties, yielding ε r = 10.4 ± 0.2, Q × f = 13,057 ± 500 GHz, and τ f = −89.2 ± 0.7 ppm/°C. Furthermore, Ca 3 Cu 2 GeV 2 O 12 showed good chemical compatibility with silver electrodes, indicating its potential as a promising candidate material for low-temperature co-fired ceramic (LTCC) applications.
✓ 已验证
产品关联
DOI
高影响因子
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY
·
2026
·
IF 4.8
Xinyi Bai,Mingyu Wang,Haofei Sun,Bo Su,Zhaoxin Geng,Kai Li,Hailin Cui,Shengbo Zhang,Cunlin Zhang
Urea is a nitrogenous fertilizer characterized by high water solubility, yet it suffers from a relatively low nitrogen utilization efficiency. It not only pollutes the environment but also reduces agricultural productivity. Developing the physicochemical properties of nitrogen fertilizers is the key to improve the nitrogen utilization efficiency. In the present investigation, a novel 1:1 urea-ammonium chloride co-crystal system was synthesized through solvent evaporation methodology. This co-crystallization approach aimed at optimizing the physicochemical characteristics of urea. The formation of cocrystal was confirmed by a variety of characterization techniques, including PXRD, and DSC, TGA, SEM, Raman spectroscopy, and the crystal structure and purity were verified. The spectral properties of the material were measured using the THz-TDS system, which can effectively characterize the formation of cocrystal. The crystal structures and theoretical THz spectra of urea, ammonium chloride and the corresponding cocrystal were simulated by using density functional theory calculations. The solubility of the synthesized cocrystal was evaluated under greenhouse conditions, and the cocrystal's urea solubility was 36.15 g/100 mL, a ~ 66% reduction from pure urea's 100–120 g/100 mL. This work provides valuable methodological insights for agricultural cocrystal development and highlights the potential of cocrystal urea as a slow-release nitrogen fertilizer.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY
·
2026
·
IF 4.8
Chen Zheng,Shuang Li,Wenhui Fang,Wei Zhang,Zhiwei Men
The competition between the intramolecular hydrogen bonds (intra-HBs) in astaxanthin (AST) and the intermolecular hydrogen bonds (inter-HBs) between AST and ethanol (EtOH) controls the structural stability of AST in the solution during the cooling process. This study employs an integrated approach combining Moving window Two-Dimensional (MW2D) correlation Raman spectroscopy and density functional theory (DFT) simulations to investigate the interaction between ethanol (EtOH) and astaxanthin (AST) across a temperature range of 303 K–83 K. The MW2D analysis indicates that, below 253 K, EtOH reorganizes into cooperative multimers prior to any conformational change in AST. DFT simulations demonstrate that EtOH multimers weaken the intramolecular hydrogen bonds (intra-HBs) in AST through O H⋯O C interactions. These findings clarify the apparent contradiction between the extended conjugation length of AST and weakened inter-HBs.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
OPTICAL MATERIALS
·
2026
·
IF 4.3
Kaitao Chen,Zewen Lin,Rui Huang,Jie Song,Haixia Wu,Li Xia,Zhenxu Lin,Yi Zhang,Hongliang Li,Yanqing Guo,Huihong Lin,Yandan Wu,Danqing Liu,Youming Lu,Paul K. Chu
Uncontrolled crystallization of halide perovskites during chemical vapor deposition (CVD) remains a critical barrier to producing high-performance perovskite films for optoelectronics. Herein, an external electric field is introduced during CVD to precisely regulate CsPbBr 3 film growth. Electric-field-assisted growth leads to suppressed instantaneous supersaturation, elevated nucleation energy barriers, and reduced nucleation density, resulting in the formation of uniform, compact films with significantly enlarged grain sizes. These structural improvements yield a lower trap density, enhanced carrier mobility, and reduced non-radiative recombination compared to the untreated samples. Photodetectors constructed with the optimized films have substantially better optoelectronic properties, manifested by a responsivity of about 62 A/W, a specific detectivity surpassing 10 12 Jones, and a broad linear dynamic range of 118 dB. Moreover, they show a −3 dB bandwidth of ∼250 Hz and significantly faster response time, outperforming devices without electric field assistance. The results reveal a scalable and effective strategy to tailor perovskite crystallization by electric field engineering, enabling the fabrication of high-performance optoelectronic devices.
✓ 已验证
产品关联
DOI
高影响因子