MACROMOLECULAR BIOSCIENCE
·
2026
·Vol. 26
·期 8
·e70242
·
IF 4.2
Linhan Hu,Zheng Yang,Xinwei Tao,Bowen Ren,Tianle Zhou,Jianliang Li,Huaping Tan,Xiaohong Hu
Hydrogel-based dressings are widely used in wound healing. Herein, we report a polyacrylic acid (PAA)/polyvinyl alcohol (PVA) composite hydrogel fabricated via self-catalyzed free radical polymerization, with borax serving as the reinforcing phase. Meanwhile, metal-ligand coordination bonding between tannic acid (TA) and Fe 3 + further elevates the crosslinking density of the hydrogel network. Magnetic chitosan microspheres (MCMs) were synthesized by emulsion cross-linking and loaded with two antibacterial agents, namely tetracycline hydrochloride (TH) and berberine hydrochloride (Bbh). The incorporation of MCMs into the hydrogel matrix resulted in the development of a multifunctional composite hydrogel suitable for wound dressing applications. Results demonstrated that the composite hydrogel containing a specific concentration of 4‰ (w/v) borax and 20 mg/mL MCMs exhibited superior performance, including enhanced mechanical strength, improved responsiveness, sustained drug release, and potent antibacterial efficacy. The core novelty of this work lies in the synergistic integration of borax-based mechanical reinforcement, MCM-mediated dual drug loading and sustained release, and the self-catalyzed polymerization system. This innovative structural and functional collaboration effectively optimizes the mechanical stability of the hydrogel dressing and achieves synergistic antibacterial and intelligent responsive therapeutic performances, providing a reliable and high-efficiency candidate for advanced wound care and next-generation wound dressing applications.
✓ 已验证
产品关联
DOI
高影响因子
Materials
·
2026
·Vol. 19
·期 14
·3113
·
IF 3.7
Dingqin Wang,Zihao Fei,Deyi Zheng
Poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) polymer electrolytes suffer from low ionic strength and poor mechanical performance. Meanwhile, lithium lanthanum titanate (LLTO) fillers exhibit severe agglomeration and weak interfacial compatibility with the polymer matrix. To solve these problems, 3-glycidoxypropyltrimethoxysilane (KH560) at four different concentrations (1 wt%, 2 wt%, 3 wt%, 4 wt%) was loaded onto polydopamine-modified LLTO (PDA@LLTO). The modified materials were mixed with PVDF-HFP, and composite solid electrolytes were fabricated by the solution casting method. The epoxy groups in KH560 undergo ring-opening reactions with amino and hydroxyl moieties on PDA, while its trimethoxysilane groups crosslink with the polymer matrix, forming a robust “LLTO-PDA-KH560-polymer” interfacial structure. This dual modification markedly improves the dispersion of PDA@LLTO, strengthens interfacial adhesion, and enhances the mechanical and electrochemical properties of the composite electrolyte. All KH560 loadings suppress LLTO agglomeration, and the 3 wt% grafting ratio yields the optimal performance: a uniform and dense microstructure, a room-temperature ionic conductivity of 5.92 × 10 −4 S cm −1 , an electrochemical stability window extended to 4.88 V, and a tensile strength over 50% higher than the ungrafted sample. The modified electrolyte effectively inhibits lithium dendrite growth and enhances the cycling stability of solid-state batteries. This work demonstrates that KH560-PDA synergistic modification enables comprehensive performance optimization of composite electrolytes, offering a viable strategy for designing high-performance electrolytes for solid-state lithium-metal batteries.
✓ 已验证
DOI
PubMed
高影响因子
Nature Communications
·
2026
·
IF 18.1
Wensheng Wang,Shouwei Gao,Han Wu,Pengyu Chen,Dongnan Xu,Haoyan Xu,Mingxing Jing,Qi Sun,Shaocong Chang,Zhuangzhi Sun,Haipeng Yu,Zuankai Wang
Water evaporation, a physical process effectively driving natural hydrological cycles, has long suffered from rate limitations in industrial applications. Particularly in scenarios such as solar steam generation and evaporation cooling, the evaporation rate of conventional evaporators struggles to meet the practical request, due to the unresolved boundary layer resistance at the liquid-air interface. Here, we reinvent Nikola Tesla’s fluidic diode into a reverse Tesla valve modulated bulk-effect evaporation system (BEES). By leveraging structure-induced vortex airflow to disrupt thermal and mass transfer boundary layers, BEES unlocks previously unattainable evaporation dynamics at the inner liquid-air interface and achieves an evaporation rate of 21.29 kg m −2 h −1 , with a total energy/solar efficiency of 627%. Our BEES enables all-day freshwater harvesting and efficient evaporative cooling, achieving energy savings of 414 GJ m −3 month −1 . This work establishes a bulk-effect evaporation framework complementary to traditional interfacial engineering for addressing the water-energy nexus. Inspired by Tesla’s fluidic diode, the authors use a reverse Tesla valve to induce vortex airflow and disrupt conventional gas-liquid interface boundary layer resistance. This approach unlocks the evaporation dynamics of bulk-effect evaporation systems.
✓ 已验证
DOI
PubMed
高影响因子
Advanced Science
·
2026
·
IF 14.1
Zetong Li,Wei He,Guangji Wang,Jingwei Zhang,Zhimin Chai,Xinchun Lu
Metal oxides exhibit high transparency across the visible spectrum, making them challenging to anneal via flash lamp annealing (FLA). Whether such materials can effectively absorb light and self‐heat remains debated. Conventional workarounds often involve light‐absorbing layers; however, these approaches introduce complexity to the fabrication process and impose limitations on device architecture. Here, we introduce a FLA strategy that enables conversion of metal oxide sol–gels into functional oxides per layer within tens of seconds on both silicon and ultra‐thin glass (UTG) substrates—without additional light‐absorbing layers—by employing a mullite chuck. Finite element analysis (FEA) results indicate that the gel‐to‐oxide transformation is initiated by direct light absorption within the metal oxides. The low thermal conductivity of mullite restricts heat dissipation, facilitating a temperature rise in the metal oxide layers with increasing pulse count and promoting complete conversion. FEA further reveals that metal oxides on UTG attain lower temperatures than those on silicon, due to greater heat dissipation into the UTG substrate. We demonstrate all‐solution‐processed thin‐film transistors and functional logic gates using FLA‐processed metal oxides. This approach shortens fabrication time by two orders of magnitude without sacrificing device performance, highlighting its potential for high‐throughput production of complex integrated circuits. A flash lamp annealing strategy using a mullite chuck enables rapid conversion of sol–gels to metal oxides on silicon and ultra‐thin glass without extra light‐absorbing layers. Direct light absorption initiates the transformation, and the low thermal conductivity of mullite promotes heat accumulation. All‐solution‐processed electronics fabricated in this way shorten processing time by two orders of magnitude while maintaining performance.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Advanced Science
·
2026
·
IF 14.1
Jianming Liao,Lijun Fan,Yunyuan Dong,Xuyu Bao,Xiaobin Chen,Qifu Zheng,Guanqing Zhang,Shen Wang,Wei Chen,Min Zhang,Shuaiming He
Amid intensifying environmental and energy pressures, sustainable thermal‐insulation materials that also provide effective fire protection are increasingly needed for buildings. Cellulose‐based foams are promising candidates for building‐envelope applications; however, their practical deployment is hindered by limited fire performance, inadequate structural stability, and complex processing. Here, we propose a multiscale biomimetic strategy inspired by mussel adhesion and hierarchical brick‐and‐mortar architectures. Polydopamine is introduced as an interfacial bridging layer to uniformly immobilize bentonite nanosheets within a cellulose network, enabling the fabrication of high‐efficiency flame‐retardant cellulose‐based biomimetic foam (CBF) through aqueous mechanical foaming and ambient‐pressure drying. The resulting CBF exhibits low thermal conductivity alongside improved flame retardancy and environmental compatibility. A cradle‐to‐grave life‐cycle assessment further indicates lower greenhouse‐gas emissions and reduced toxicity‐related impacts than conventional petroleum‐derived foams, while retaining recyclability and biodegradability. Collectively, these results establish a green, scalable route to high‐performance, degradable thermal‐insulation materials for safer and more energy‐efficient buildings. Inspired by mussel adhesion and hierarchical brick‐and‐mortar architectures, a cellulose‐based biomimetic foam is constructed by anchoring bentonite nanosheets onto a polydopamine‐decorated cellulose nanofiber network. The resulting foam combines low thermal conductivity with intrinsic flame retardancy and full biodegradability, presenting a sustainable, scalable alternative to petroleum‐based insulation materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Frontiers in Plant Science
·
2026
·
IF 5.9
Yue Zhong,Yiyang Ren,Jiayin Zhang,Jialei Liu,Yuguang Zheng,Dan Zhang,Lei Wang,Long Guo
IntroductionArtemisia argyi Levl. et Vant is a traditional Chinese medicinal herb with considerable medicinal value. A. argyi Levl. et Vant. leaves (AAL) have exhibited diverse biological activities that are tightly associated with their chemical components. During growth, the dynamic accumulation trends of bioactive metabolites were varied along with AAL developing. However, systematic studies on the dynamic variation patterns and regulatory mechanisms of major chemical constituents throughout their growth cycle remain scarce. The present study aims to clarify metabolic dynamic patterns of AAL during development.MethodsMass spectrometry-based metabolomic platforms were applied for chemical profiling of AAL samples from 8 distinct growth stages. HS-GC-MS, pre-column derivatization GC-MS and UHPLC-Q-TOF-MS was applied for both volatile and non-volatile metabolite analysis. Orthogonal partial least squares-discriminant analysis and clustering analysis were further carried out for screening of differential components. A dynamic metabolism network of AAL was constructed by mapping annotated metabolites on their biosynthetic pathways.ResultsHS-GC-MS enabled annotation of 44 volatile metabolites, comprising 36 monoterpenoids, 3 sesquiterpenoids, 3 alcohols, and 2 aromatic hydrocarbons. Pre-column derivatization GC-MS analysis allowed detection of 88 metabolites, including 38 sugar derivatives, 21 amino acids, 16 organic acids, and 13 miscellaneous metabolites. UHPLC-Q-TOF-MS further enabled the detection of additional of 44 metabolites, including 26 flavonoids, 12 phenolic acids, 5 coumarins, and 1 terpenoid. Most monoterpenoids and phenolic acids displayed significantly higher (P < 0.05) relative abundances at the early growth stage. Most flavonoids reached peak abundance at the vigorous growth stage. Sugar derivatives remained at low levels in AAL during the early growth stage, yet accumulated markedly at the vigorous and senescence stages. A proposed metabolic network encompassing pathways of carbohydrate, amino acid, flavonoid, terpenoid, and organic acid was constructed to further explore metabolism regulatory during AAL development. DiscussionThe comprehensive profile of major metabolites in AAL across growth stages provides a scientific basis for the quality evaluation and sustainable exploitation of AAL medicinal resources.
✓ 已验证
DOI
高影响因子
Frontiers in Nutrition
·
2026
·
IF 5.5
Weihua Zhang,Ning Yang,Boyu Wen,Lihui Qin,Jianhui Jiang,Yifang Wang,Mei Huang,Ruichen Wang,Lili Wu,Fuan Zhang,Guozhen Cui,Tonghua Liu
BackgroundAtherosclerosis remains a leading cause of cardiovascular morbidity and mortality worldwide. Although camellia oil exhibits promising anti-atherosclerotic properties, its direct consumption is often limited by its strong flavor and greasy texture.ObjectiveThis study aimed to develop a camellia oil-based beverage with a milky appearance, reduced greasiness, and enhanced palatability. In addition, the anti-atherosclerotic effects of the beverage were examined in ApoE−/− mice.MethodsA camellia oil-based oil-in-water emulsion was optimized and characterized for stability, particle size, and zeta potential. Its anti-atherosclerotic effects were evaluated in high-fat diet-fed ApoE−/− mice after 8 weeks of treatment using aortic Oil Red O staining, serum lipid assays, and UHPLC-Q-TOF/MS-based metabolomics.Results and conclusionIn ApoE−/− mice, the beverage treatment significantly reduced aortic plaque burden, achieving an efficacy comparable to that of unprocessed camellia oil, thereby demonstrating that emulsification preserved its bioactivity. Additionally, the beverage significantly lowered serum total cholesterol, triglycerides, and low-density lipoprotein cholesterol (p < 0.05). Untargeted metabolomic profiling further indicated that its protective effects were associated with the modulation of metabolic pathways involved in lipid regulation. Taken together, these findings highlight the camellia oil-based beverage as a promising dietary strategy for mitigating atherosclerosis and improving lipid homeostasis.
✓ 已验证
DOI
高影响因子
MOLECULES
·
2026
·Vol. 31
·期 15
·2595
·
IF 5.1
Jie Chen,Ying Zhou,Yishao Wang,Fujing Huang,Fangming Zou,Shunmei He,Xianwen Song
Small-molecule blending is an effective strategy for improving the mechanical properties of poly(vinyl alcohol) (PVA). However, the influence of structural differences among phenolics on the toughening mechanism remains unclear. In this study, we systematically investigated the reinforcing effects of three trihydroxy-phenolics (apigenin, galangin, and baicalein) on PVA hydrogels by combining molecular simulations with experimental validation. Molecular simulations predicted that H-bonding crosslinking between phenolics and PVA chains is the central reinforcement mechanism, and that the spatial arrangement of hydroxyl groups and the competition between intermolecular H-bonding ultimately determine the performance. Structural characterization and experimental validation showed that apigenin, owing to the dispersed spatial distribution of its three hydroxyl groups, exhibits stronger H-bonding crosslinking ability and achieves the most significant reinforcement. After a single freeze–thaw cycle, all trihydroxy-phenolics/PVA composite hydrogels exhibited markedly better mechanical properties than pure PVA hydrogels, with the following strength order: apigenin/PVA > galangin/PVA ≈ baicalein/PVA. This study provides a rapid and efficient theoretical model and a reference case for small-molecule toughened PVA hydrogels.
✓ 已验证
DOI
PubMed
高影响因子
Frontiers in Pharmacology
·
2026
·
IF 5.4
Xiaohuan Gao,Guangzhao He,Yanzhi Bi,Hui Luo,Jing Wu,Yuanyuan Zu,Yun Ji,Jingping Yu
AimsMontmorillonite powder (MP) can adsorb pyrotinib and reduce its bioavailability. This study investigated the effects of different dosing intervals on the pharmacokinetic interaction between MP and pyrotinib in rats.MethodsEighteen male Sprague-Dawley rats were randomly assigned to three groups (n = 6/group): Control (pyrotinib alone), 0.5-h interval (MP given 0.5 h after pyrotinib), and 2.0-h interval (MP given 2.0 h after pyrotinib). Pyrotinib (10 mg/kg) was orally administered to all rats, followed by MP (240 mg/kg) or water (control) at designated time points. Blood samples were collected up to 24 h post-dose. Plasma pyrotinib concentrations were determined by a validated liquid chromatography-tandem mass spectrometry method. Pharmacokinetic parameters were calculated using WinNonlin.ResultsThe 0.5-h interval group showed substantially reduced pyrotinib exposure, with area under the curve (AUC) from time zero to last time point (AUClast) and AUC from time zero to infinity (AUCinf) decreasing by 31.2% and 31.3%, respectively, indicating statistically significant reductions (90% CIs <1.0). Cmax reduction was 20.7%, which was not statistically significant (90% CI crossed 1.0). For the 2.0-h interval group, all GMRs were close to unity, but the wide 90% CIs (69.1%–137.6%) could not rule out a clinically meaningful impact.ConclusionIn rats, MP administration at an insufficient dosing interval markedly compromises pyrotinib systemic exposure, whereas adequate temporal separation largely mitigates this interaction. These findings underscore the urgent need for dedicated clinical pharmacokinetic studies to define the optimal dosing interval in humans and to minimize the risk of subtherapeutic pyrotinib exposure in clinical practice.
✓ 已验证
DOI
高影响因子
ChemPlusChem
·
2026
·Vol. 91
·期 8
·e70223
·
IF 3.1
Huan V Doan,Huong T T Tran,Duyen T Le,Xuan N Pham
In this study, a novel Ni–MoO 3 @MIL‐101(Cr) composite catalyst was synthesized via a one‐step hydrothermal method for the oxidative desulfurization (ODS) of dibenzothiophene (DBT). The catalyst combines the high specific surface area of MIL‐101(Cr) with the redox properties of Ni–MoO 3 , providing an effective synergy between adsorption and catalytic oxidation. The incorporation of Ni as a promoter significantly enhances catalytic activity, enabling complete sulfur removal (∼100%) under mild conditions (50 °C) within 60 min. Structural characterizations (scanning electron microscopy, X‐ray diffraction, and SAED) reveal that the catalyst retains its nanosheet–nanorod morphology and crystalline MoO 3 phase after repeated use, with only a slight decrease in the crystallinity of the MIL‐101(Cr) framework. Mechanistic analyses using X‐ray photoelectron spectroscopy, Raman, and temperature‐programmed reduction demonstrate that surface oxygen vacancies and Lewis acid sites promote ODS activity, while highly dispersed Ni–MoO 3 species facilitate H 2 O 2 activation and Mo 6+ /Mo 5+ redox cycling, leading to efficient generation of reactive oxygen species. The catalyst also exhibits excellent stability, maintaining 98.7% DBT conversion after five cycles. These results demonstrate that the strong Ni–Mo synergistic effect and efficient oxygen activation make Ni–MoO 3 @MIL‐101(Cr) a robust and highly efficient catalyst for deep fuel desulfurization. This study presents a significant advancement in the field of oxidative desulfurization by developing a synergistic Ni–MoO 3 redox catalytic system confined within the porous MIL‐101(Cr) framework. Unlike conventional catalysts, the designed material effectively enhances H 2 O 2 activation through cooperative interactions between Ni and Mo species, enabling rapid and ultra‐deep removal of refractory sulfur compounds under mild conditions. The integration of redox‐active sites with a high‐surface‐area MOF support not only improves catalytic efficiency but also ensures excellent stability and recyclability. This work provides new insights into the rational design of bimetallic catalysts for green fuel purification and offers a promising strategy for achieving sustainable and energy‐efficient desulfurization processes.
✓ 已验证
DOI
PubMed
高影响因子
Frontiers in Cell and Developmental Biology
·
2026
·
IF 5.3
Xiuying Zhang,Wei Zhao,Jia Zhao,Ni Fan,Yu Wang,Aimin Xu,Wei Yang,Jianhui Rong
Introduction Myocardial ischemia-reperfusion injury (MIRI) is a major obstacle in the treatment of myocardial infarction and is closely associated with oxidative stress and cardiomyocyte death. Although endogenous protective mechanisms are activated during ischemic stress, they are often insufficient to prevent injury. SUMOylation is an important post-translational modification involved in cellular stress adaptation, and SUMO2 may contribute to the endogenous cardioprotective response. Methods To investigate the role of SUMO2 in MIRI, we generated heart-specific SUMO2 knockout (SUMO2-KO) mice by crossing SUMO2-loxP mice with Myh6-Cre mice and assessed cardiac injury after myocardial infarction. In parallel, adeno-associated virus-mediated SUMO2 overexpression was used to assess the protective effect of SUMO2. In H9c2 cells subjected to oxygen-glucose deprivation, SUMO2 silencing was performed to examine reactive oxygen species (ROS) production, Bax/Bcl-2 balance, apoptosis, and p53-associated signaling. Results SUMO2-KO mice exhibited more severe myocardial injury and worse cardiac dysfunction after ischemic injury. In contrast, SUMO2 overexpression markedly attenuated cardiac damage. In H9c2 cells, SUMO2 silencing increased ROS production, disrupted the Bax/Bcl-2 balance, and enhanced apoptosis. These effects were accompanied by alterations in p53-associated signaling. Discussion These findings suggest that SUMO2 is an important regulator of endogenous cardioprotection during MIRI and may represent a potential target for future investigation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Bone Research
·
2026
·Vol. 14
·期 1
·82
·
IF 20.1
Huang Tiannan,Wu Shali,Qian Wei,Chen Ruiying,Chen Erman,Wang Meizhu,Zhang Cui,Zhou Chenhe,Yu Luyang,Wu Mengjie,Li Yi-Ping,Wu Mengrui
Exhaustion of skeletal stem and progenitor cells (SSPCs) drives age-related delays in fracture repair, yet the upstream regulators of SSPC maintenance are unclear. We identify that core-binding factor β (Cbfβ) in bone marrow Adipoq + cells (BMACs) is essential for maintaining SSPC number and function. Cbfβ deletion in BMACs (CKO) leads to SSPC depletion, including periosteal populations, and impairs bicortical fracture healing in mice. Multi-omics (RNA-seq, CUT&Tag-seq, and ATAC-seq) reveal that Cbfβ preserves chromatin accessibility at DNA repair loci, maintaining genomic stability, preventing BMAC senescence, and mitigating the senescence-associated secretory phenotype (SASP). Senolytic therapy alleviates BMAC senescence, restores SSPC populations, and improves bone repair in CKO mice. In both humans and mice, Cbfβ expression declines with aging, accompanied by increased BMAC senescence. AAV-mediated Cbfβ overexpression restores aging-related bone repair and SSPC decline. These findings reveal a novel mechanism in which Cbfβ in BMACs regulates SSPC maintenance via a senescence/SASP axis, offering a potential therapeutic strategy for age-related bone repair deficits.
✓ 已验证
产品关联
DOI
高影响因子