Small
·
2026
·
IF 11.8
Chang Yun,Chun Li,Pengxin Zhao,Zhaohuan Zhang,Xue Mao,Qingling Zhang,Xiaoxiao Wei,Zhenfang Zhang,Fenglei Zhou,Hong Wu,Chengkun Liu
The widespread discharge of dye-laden wastewater poses serious environmental and health threats due to its high toxicity and poor biodegradability. Conventional treatment methods are often energy-intensive and prone to secondary pollution, highlighting the need for efficient and sustainable purification materials. Herein, a green and scalable three-step strategy is developed to fabricate multifunctional ethanol-soluble polyamide/activated carbon/polydopamine/layered double hydroxide (EPA/AC/PDA/LDHs) nanofiber membranes. The process—combining blend electrospinning, biomimetic in situ polymerization, and room-temperature LDH growth—completely avoids toxic solvents and high-temperature calcination. The hierarchical porous structure, formed through the synergistic integration of AC, PDA, and LDHs, provides abundant active sites, strong interfacial adhesion, and enhanced charge transfer capability. The optimized membrane achieves removal efficiencies of 96.3% for methylene blue and 93.2% for Congo red, maintaining over 70% performance after five reuse cycles. Mechanistic studies reveal a synergistic adsorption-photocatalysis mechanism, where pollutants are captured via electrostatic attraction and π-π stacking, then degraded by reactive radicals generated under visible light through PDA-enhanced charge separation. This work offers a solvent-safe, energy-efficient, and recyclable pathway for advanced wastewater treatment and establishes a generalizable paradigm for green fabrication of environmental remediation materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Small
·
2026
·
IF 12.1
Yu Liu,Yi Xin,Teng Zhang,Yunlong Li,Junhong Jian,Shoufu Cao,Jian Luan,Xiaosa Zhang,Wenze Li,Wei Qi
Tailoring bimetallic synergy in azo-functionalized porous organic polymers for enhanced electrocatalytic CO 2 reduction porous organic polymers (POPs) have emerged as promising candidates for electrocatalytic applications due to their structural tunability and high surface areas. In this study, we report a coordination-driven assembly strategy to construct a Cu/Co bimetallic azo-phenolic polymer (denoted as Cu@Azo-CoPG) through chelation of azo-phenolic motifs with Cu 2 + ions. Systematic evaluation reveals that the bimetallic Cu@Azo-CoPG outperforms its monometallic counterparts (Cu-PG and Co-PG) in CO 2 reduction reaction (CO 2 RR), achieving a remarkable CO Faraday efficiency (FE CO ) of 94.3%. First-principles calculations elucidate that the Cu─Co dual sites synergistically modulate reaction energetics: the Co center lowers the energy barrier for * COOH intermediate formation, while adjacent Cu sites facilitate CO desorption. This work establishes a design paradigm where the electronic interplay between heterometallic sites in POPs enhances both CO 2 adsorption/activation and product desorption kinetics, offering new insights into the rational engineering of dual-active-site catalysts for sustainable energy conversion.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF POLYMER SCIENCE
·
2026
·
IF 3.6
Haiyan Liu,Hui Tao,Pei Zhao,Haicun Yang,Junfeng Cheng,Cheng Zhang,Chunlin Liu,Fangli Sun,Louis C. P. M. de Smet,Zheng Cao
Conductive hydrogels have attracted significant interest due to their potential applications in human motion monitoring, health diagnostics, and beyond. However, integrating ultra-stretchability, strain sensitivity, and freeze resistance into hydrogel strain sensors remains a challenge. In this study, polyacrylamide/polyvinyl alcohol/quaternized chitosan (PAM/PVA/QCS, PPQ) hydrogel was fabricated via a one-pot in situ free radical copolymerization process, followed by freeze–thaw treatment and immersion. The hydrogel matrix consists of acrylamide (AAm) chemically crosslinked by N, N′ -methylenebisacrylamide (MBA) and PVA, forming a physically crosslinked hydrogen-bonded network, with QCS serving as the reinforcing phase. Under the Hofmeister effect, introduction of citrate ions (Cit 3− ) as salting-out ions facilitates hydrogen bond formation through amino groups (-NH 2 ) in PAM, while establishing electrostatic interactions with the quaternary ammonium groups in QCS. Concurrently, Cit 3− anions regulate the hydration chemistry of PVA by adsorbing water molecules within the polymer chains. The ionic hydrogel demonstrates a maximum elongation of 1,014% and ionic conductivity of 1.43 S/m while maintaining stable performance at −20°C. It exhibits exceptional mechanical properties, frost resistance, and electrical conductivity. Notably, when deployed as a flexible strain sensor, the hydrogel achieves outstanding tensile strain sensitivity (GF = 1.812), rapid response, and stable electrical signal output over 500 cyclic loading-unloading tests. Graphical The PPQ-Cit hydrogel is characterized by its anti-freezing capability, superior toughness, excellent electrical conductivity, and long-term stability, enabling reliable operation across a wide strain range (0–900%). These combined properties underscore its significant potential as a wearable sensor for monitoring a broad spectrum of human motions.
✓ 已验证
产品关联
DOI
高影响因子
Small
·
2026
·
IF 11.8
Rong Wang,Chenyu Zhao,Shuai Zhang,Zepu Chang,Siyuan Luo,Yan Li,Shuo Zhang,Zhenhai Gan,Jingran Di,Ying Hao,Xueping Li,Daocheng Wu
Multimodal tumor therapies suffer from poor spatial co-localization, asynchronous activation, and weak cross-modal reinforcement, leading to limited therapeutic efficiency. Here, we report a photoelectric therapy needle (PTN) system that achieves in situ synchronous electrothermal-photodynamic therapy (synchronous ETT-PDT) and amplifies chemotherapeutic efficacy through hierarchical cross-modal and cross-component reinforcement. The PTN integrates optical fibers and heating wires within a single hollow needle, enabling precise, spatiotemporally synchronized activation under ultralow energy (0.2 V, 0.1 W cm −2 ). We further designed hyaluronic acid-modified MOF@infinite coordination polymer nanocomposites (HA-MOF@ICP NCPs) co-loaded with ICG, SN38, and AQ4N for sequential release. This structure allows PDT-induced hypoxia to activate AQ4N, while ETT enhances SN38 cytotoxicity, establishing a bidirectional ETT↔PDT reinforcement and multi-level drug synergy. In vivo, PTN-NCPs achieved complete eradication of large tumors (≈300 mm 3 ) within 21 days using one-tenth conventional PDT energy and minimal drug doses (1/2.5 AQ4N, 1/12.5 SN38), with no recurrence over 60 days. Four parameters of toxicity, energy, dosage and therapeutic effect were selected and normalized to assess the cost-effective degree of our mutually reinforcing strategy. Compared with the results of prior trimodal strategies, our mutually reinforcing strategy had the largest cost-effective degree value (1.6–10.9 times high), achieving high cost-effective tumor comprehensive therapeutic outcomes.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
·
2026
·Vol. 114
·期 2
·e70036
·
IF 3.9
Jie Zhang,Zengzilu Xia,Zhuoqi Xu,Huiwen Zhang,Huilin Zhao,Qing Li,Kaiyong Cai
The biological inertness of Ti scaffolds prevents the proliferation and osteogenic differentiation of marrow mesenchymal stem cells (MSCs) on pure Ti scaffolds. Medical studies have shown that magnetic fields can promote the proliferation and osteogenic differentiation of stem cells, thereby promoting the production of bone tissue and fracture healing. In this work, a magnetic GelMA hydrogel coating loaded with Fe 3 O 4 magnetic nanoparticles was added onto the modified Ti surface. The introduction of GelMA hydrogel reduced the elastic modulus of the pure Ti surface and provided good environmental conditions for the proliferation and differentiation of cells. Through applying a magnetic field externally, the proliferation and osteogenic differentiation of MSCs on the composite Ti scaffolds were improved. By adjusting the direction and strength of the external magnetic field and detecting the cell viability and osteogenic differentiation index, the optimal direction and strength of the external magnetic field for the composite Ti scaffold were determined. Western Blot analysis revealed that osteogenesis was related to the JNK pathway. It was proven that the introduction of a magnetic GelMA hydrogel coating improved the proliferation and osteogenic differentiation of MSCs, and the effect of the improvement was related to the direction and strength of the external magnetic field, which provides a new strategy to bone injury repair.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
·
2026
·
IF 17.6
Shixun Wang,Zhiquan Wei,Yiqiao Wang,Shengnan Wang,Dedi Li,Hu Hong,Chuan Li,Yanbo Wang,Zhuoxi Wu,Shaoce Zhang,Xueying Zheng,Yi-Chun Lu,Chunyi Zhi
Electrolyte additive engineering offers a promising pathway for achieving dendrite-free aqueous zinc-ion batteries (ZIBs) while facing challenges related to hydrophilic characteristics and/or high loading requirements. Herein, we developed a cost-effective and scalable facile immersion treatment to deposit a hydrophobic 1,3-Di(o-tolyl)thiourea (DTH) layer with nanoscale thickness (≤ 14 nm). This approach yields an ultra-low DTH loading (5.37 × 10 −13 M) and exceptional cost efficiency (1.43 × 10 −7 USD Ah −1 ), surpassing conventional water-miscible organic additives and biomass-derived counterparts by orders of magnitude. The hydrophobic DTH layer optimizes Zn electrochemistry and mitigates parasitic reactions, irrespective of the immersion sequence in the same batch of ethanol solution. Consequently, the Zn||ODASnI 4 (ODA denotes 1,8-octadiamine) coin cell demonstrated stable operation over 2500 cycles at 2 A g −1 with a low additive cost of 1.43 × 10 −6 USD per cell. The pouch cell showed an average coulombic efficiency (CE) of 99.9% and 72% capacity retention after 1200 cycles, incurring an ultra-low additive cost of 7.02× 10 −5 USD while delivering a high energy density of 143 Wh kg −1 (based on cathode mass). This work enabled durable and high-performance ZIBs at minimal cost, providing a foundation for further exploration of low-cost, scalable strategies in aqueous battery systems. Graphical A nanoscale hydrophobic 1,3-Di(o-tolyl)thiourea (DTH) layer (<14 nm) was deposited on zinc anodes for durable aqueous Zn-ion batteries, costing merely 1.43×10 −7 USD·Ah −1 . By suppressing side reactions and dendrites, it achieved 2500-cycle coin cells and a 143 Wh·kg −1 pouch cell (1200 cycles) with a record-low additive cost (7.02×10 −7 USD).
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Small
·
2026
·
IF 11.8
Shuo Yang,Fene Gao,Ying Zou,Ye Lei,Ziwei Liu,Shulu Wang,Jialin Wang,Xiubing Lin,Jing Liu,Chunying Chen,Juan Xu
Periodontitis is a prevalent chronic inflammatory disease driven by bacterial infection, whose treatment remains challenging due to persistent inflammation and limited tissue regeneration. Here, we developed an injectable and thermosensitive hydrogel (Bi 2 S 3 @Gel) composed of hyaluronic acid/Pluronic F127 and Bi 2 S 3 nanorods (Bi 2 S 3 NDs), which synergistically combines antibacterial and anti-inflammatory functions. Under near‑infrared (NIR) irradiation, Bi 2 S 3 @Gel exhibits excellent photothermal properties. It generates mild hyperthermia while simultaneously amplifying reactive oxygen species (ROS) and depleting glutathione (GSH), leading to effective bacterial eradication. Simultaneously, the hyaluronic acid matrix prolongs local retention, suppresses M1 macrophage polarization, and promotes tissue repair. In vitro studies confirm favorable biocompatibility, potent antibacterial activity, and effective immunomodulation. In vivo, Bi 2 S 3 @Gel accelerates diabetic wound healing and promotes periodontal regeneration comparable to minocycline treatment, as evidenced by reduced inflammation, enhanced collagen deposition, and significant alveolar bone restoration. Collectively, Bi 2 S 3 @Gel integrates antibacterial, anti‑inflammatory, and regenerative capabilities, offering a promising therapeutic platform for periodontitis and other chronic infectious diseases.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Small
·
2026
·
IF 11.8
Wenting Lan,Yafei Xiao,Minghua Zhang,Siyu Luo,Yue Jiang,Minmin Fan,Ya Cao
Developing high-performance thin and robust anion exchange membranes (AEMs) is crucial not only for enhancing the efficiency of alkaline anion exchange membrane fuel cells by reducing ohmic resistance and alleviating water imbalance but also for expanding their applications into areas such as oil-water separation and humidity-responsive technologies. Herein, thin and robust template-reinforced AEMs were fabricated by incorporating a cross-linked polyelectrolyte into a microporous polyethylene base membrane using a pore-filling method, with dimethyl diallyl ammonium chloride as the monomer and triallyl amine as the cross-linking agent. The resulting composite AEMs exhibit remarkable properties, including high ionic conductivity (173.16 mS cm −1 at 80°C), excellent mechanical strength (tensile strength > 150 MPa), and high dimensional stability. In an H 2 /O 2 fuel cell system at 60°C, a single cell utilizing the optimized AEM achieved a maximum power density of 159 mW cm − 2 , indicating its potential for fuel cell applications. Moreover, the AEM, with strong hydrophilicity and rapid response characteristics, shows promise in moisture-responsive applications, oil-water separation, and health monitoring. Its ability to recognize spoken words and respond to varying water vapor temperatures, combined with superior flexibility and mechanical strength, makes it highly suitable for medical and non-contact human-machine interaction applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2026
·
IF 3.1
Haihua Wang,Haonan Wang,Kewei Shu,Chaoxian Chen,Qing Liu,Rui Cao,Jiaheng Li,Xing Yang,Zhuyu Li
Owing to its high lithium-ion conductivity, the cubic garnet-phase material Li 7 La 3 Zr 2 O 12 (LLZO) is a widely adopted key component in the fabrication of composite solid-state electrolytes (CSSEs). Nevertheless, the advancement of all-solid-state lithium batteries (ASSLBs) is still hindered by two major challenges: the high intrinsic crystallinity of poly(ethylene oxide) (PEO) and poor interfacial stability. Herein, cubic garnet Li 6.3 La 2.7 Ba 0.3 ZrNbO 12 (LLBZNO) featuring Ba and Nb co-doping was first prepared by a conventional solid-state method. Following this, the material was dispersed within a PEO matrix to construct composite solid-state electrolytes. Adding LLBZNO served to decrease PEO's crystallinity while enhancing its mechanical flexibility and bolstering its interfacial compatibility with lithium metal. The optimized membrane demonstrated superior properties, including a high Li + transference number of 0.75 (at 60°C) and an extended electrochemical stability window of up to 5.1 V (vs. Li/Li + ) under the present testing conditions. It also showed an excellent ability to suppress dendrites, facilitating stable cycling at 0.1 mA cm −2 for 1500 h without short-circuiting. Furthermore, the LFP/LLBZNO–PEO/Li battery delivered a high discharge capacity of 101.6 mA h g −1 after 300 cycles at 1°C with nearly 99% coulombic efficiency. These findings highlight that LLBZNO-PEO composite solid electrolytes possess superior ionic transport, electrochemical stability, and mechanical robustness, providing a viable pathway toward the advancement of next-generation high-performance ASSLBs.
✓ 已验证
产品关联
DOI
高影响因子
VIEW
·
2026
·
IF 8.1
Guangrong Zheng,Tengfei Ke,Hongjin Wang,Hong Huang,Ying Zhang,Guanghai Fei,Chengde Liao,Haiyan Yang
The antioxidant defense system (ADS) within the tumor microenvironment restricts the efficacy of reactive oxygen species (ROS) based therapies by conferring intrinsic redox tolerance. To overcome this limitation, we develop a tumor cell membrane camouflaged liposomal nanoplatform (C-MLip@LA) that modulates the ADS to enhance tumor-targeted therapy through a synergistic reactive oxygen/nitrogen species (ROS/RNS) cascade. The system encapsulates L-arginine (LA) as the core, anchors MnO 2 nanoparticles on the liposomal surface, and is cloaked with homologous tumor cell membranes, thereby enabling tumor-specific recognition and immune evasion. C-MLip@LA disassembles after cellular internalization, where MnO 2 depletes intracellular glutathione (GSH) and is reduced to Mn 2 + , thereby elevating ROS levels and enabling T 1 -weighted magnetic resonance imaging. Concurrently, the released LA reacts with endogenous H 2 O 2 to generate nitric oxide (NO). The interplay between NO and ROS initiates a cascade reaction that produces highly cytotoxic peroxynitrite, thereby amplifying immunogenic cell death and leading to pronounced tumor growth inhibition in a CT-2A tumor model. Collectively, this work presents a biomimetic nanoplatform for redox-modulated cancer therapy with integrated diagnostic and immunomodulatory functions.
✓ 已验证
产品关联
DOI
高影响因子
Energy Technology
·
2026
·Vol. 14
·期 1
·e202501951
·
IF 3.6
Yilan Chen,Jingrou Huang,Xiaozhu Wei,Xiang Lin,Jingwen Lin,Sheng Xu,Minyi Liu,Yamin Liu
This study introduces an N-doped graphene-based CO 2 adsorbent with hierarchical porosity and amine functionalization, specifically designed for direct air capture (DAC) of CO 2 in confined environments. The adsorbent was synthesized through hydrothermal self-assembly, heteroatom doping, and tetraethylenepentamine impregnation. It exhibits a graphene-like lamellar structure with interconnected pores (pore volume: 0.702 cm 3 /g, specific surface area: 127 m 2 /g) and demonstrates thermal stability up to 503 K. Under simulated confined conditions (323 K, 0.1 vol% CO 2 ), the adsorbent achieves an impressive adsorption uptake of 2.307 mmol/g and exhibits robust cyclic stability with less than 3% capacity loss over 10 cycles. Adsorption kinetics reveal a dual mechanism involving homogeneous site occupation and surface growth processes. Breakthrough curve analysis further identifies dynamic active site deactivation as the driving force behind the dimensional evolution of reaction pathways. Temperature-programmed desorption confirms 383 K as the optimal regeneration temperature, enabling complete CO 2 release within 5 min. The derived kinetic parameters provide essential insights for the design of DAC of CO 2 .
✓ 已验证
产品关联
DOI
高影响因子
Small
·
2026
·
IF 11.8
Yuhang Wang,Xinge Chen,Xiaoyun Zhang,Jianbin Zang,Lin Lu,Weizhong Yuan
Inspired by the hair structure of desert animals, the structure-engineered aerogel fiber (SAF) has effectively prepared through the utilization of the double-diffusion process in wet spinning. The SAF fabric exhibit high emissivity (96.1%) within the atmospheric window and high reflectivity (92.3%) within the solar spectrum, thereby effectively mitigating the impact of solar radiation on human thermal balance. Additionally, the fibers exhibit an internal porosity of ∼93.9%, which functions to reduce the penetration of external heat and facilitates the instantaneous absorption (over 80% of self-weight) and evaporation (∼5.7 g h −1 ) of sweat through capillary effect, thereby further enhancing the dissipation of heat from human body. The continuous and scalable technical routes also endow SAFs with outstanding mechanical strength, water resistance, and breathability. Practical application tests demonstrate that the temperature of SAF fabric is ∼10.6°C lower than the commercialized cotton fabric under direct sunlight (solar irradiation: ∼1511 W m −2 ) and ∼12.0°C under the simultaneous action of direct sunlight (solar irradiation: ∼1091 W m −2 ) and simulated sweat infiltration. These results underscore the cost-effectiveness and high performance of SAF fabric, which offers substantial solutions and broad application prospects for multifunctional textiles and evaporative and radiative synergistic cooling applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子