CARBON
·
2026
·
IF 11.6
Chunlei Chi,Guanwen Wang,Xinhou Yang,Bin Qi,Zhiyuan Li,Baoyi Mu,Zheng Liu,Tong Wei,Guojun Xu,Zhuangjun Fan
Hard carbon (HC) possesses large interlayer spacing, abundant defects, and porous structures, enabling efficient storage of large-radius K + ions. Nevertheless, its highly disordered nature renders the microstructure challenging to precisely regulate, which disrupts electronic conductivity and introduces irreversible active sites. Herein, conjugated poly(bithiophene) and phytic acid were employed as ligands to construct a lamellar precursor with reinforced interlayer support through Fe 3+ coordination and crosslinking. Upon optimized pyrolysis, the derived HC exhibits a high reversible capacity of 407 mAh g −1 , long-term cycling stability (1800 cycles at 1 A g −1 ), and excellent rate capability (200 mAh g −1 at 1 A g −1 ) in potassium-ion batteries. Thermogravimetry-mass spectrometry (TG-MS) analysis was conducted to investigate the structural evolution mechanisms of the precursor during pyrolysis. Furthermore, ex-situ characterization combined with density functional theory (DFT) calculations elucidated the intrinsic origin of the superior reversibility and activity associated with S–C and P–C doped configuration. These findings offer new insights into precursor engineering and controlled heteroatom doping for the development of high-performance HC anodes, providing both fundamental understanding and practical guidance for next-generation energy storage and conversion.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2026
·
IF 21.1
Yuwei Xiong,Chen Deng,Wei Ji,Yifei Sun,Richen Lin
Although cobalt (Co) and phosphorus (P) are widely employed to enhance the electrooxidation performance of Ni-based electrocatalysts, their synergistic roles in regulating metal-site activation and interfacial reconstruction during 5-hydroxymethylfurfural (HMF) oxidation remain unclear. Herein, by comparatively studying the electrochemical behavior and structural evolution of Ni-P/NF and Ni 0.8 Co 0.2 -P/NF during the HMF oxidation reaction (HMFOR), we identify a Co-P synergistic reconstruction mechanism that governs the dynamic formation of active interfaces. Ni 0.8 Co 0.2 -P/NF delivers a low onset potential of 1.33 V (vs. RHE) in 50 mM HMF-containing alkaline electrolyte and achieves a high current density of 900 mA cm −2 at 1.60 V (vs. RHE), with a Faradaic efficiency of 97 % toward FDCA. Mechanistic studies reveal that Co modulates the initial electronic structure of Ni sites, while P stabilizes the evolution of Co species into CoOOH under reaction conditions. The in situ generated CoOOH dynamically couples with neighboring Ni sites, thereby promoting the low-potential reconstruction of Ni 2+ into active NiOOH. In situ Raman spectroscopy further confirms the formation of a stable NiOOH/CoOOH composite active interface during HMFOR, which accounts for the reduced onset potential and accelerated reaction kinetics. This work highlights the importance of coupling static electronic modulation with dynamic electrochemical reconstruction, providing mechanistic insights for the rational design of multicomponent electrocatalysts for biomass-derived 5-hydroxymethylfurfural electrooxidation.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry A
·
2026
·
IF 9.5
Wei Peng,Zhengran Chen,Chenming Gu,Ziao Xing,Bing Wang,Ruihong Liang
The high-entropy concept has emerged as a promising strategy for designing ferroelectric ceramics with superior piezoelectric properties. To clarify the role of equal-valence B-site cations within this framework, we synthesized a series of PNN–PMeN–PT (Me = Sc, In, Lu) ceramics. When Sc³⁺, In³⁺, and Lu³⁺ were introduced in equimolar proportions, the piezoelectric coefficient (d₃₃) increased from 938 pC/N to 1012 pC/N, aligning with high-entropy predictions. However, the maximum d₃₃ value of 1046 pC/N was achieved by deviating from this ratio, specifically with a higher fraction of smaller Sc³⁺ and a lower fraction of larger Lu³⁺. Analyses based on both Landau theory and fluctuating local polarization theory reveal that this asymmetric ionic ratio further enhances the distortion of piezoelectric functional cells, leading to the optimal performance. Electrical characterization and piezoresponse force microscopy confirm that the outstanding properties originate from a synergistic design: a globally disordered matrix established via multi-cation doping, augmented by local structural heterogeneity tuned through the Sc³⁺/Lu³⁺ ratio. Our findings highlight that advancing ultrahigh piezoelectricity systems requires deliberate engineering of the local piezoelectric functional cells.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2026
·
IF 9
Xue Xin,Xuan Liu,Jie Gang,Xinyu Tang,Jingyao Tang,Hongmei Lv,Yunshan Guan,Yongquan Zhou,Weidong Zhang
Metal-organic frameworks (MOFs) show promises as boron adsorbents, but insufficient insight into adsorption mechanisms as a result of the unclear active site. In this study, a series of QHU-6 MOFs with identical structures were synthesized by tuning the amount of 1,4-cyclohexanedicarboxylic acid ligand. Characterization via SXRD, FT-IR, and XPS revealed Al–OH groups on unsaturated aluminum centers as active sites. The selective adsorption of specific boron species and the correlation between active site features and performance were revealed by 11 B NMR, Raman spectroscopy, and DFT calculations. The results showed that QHU-6 (0.5) achieved a boron adsorption capacity of 5.1 mmol·g −1 at 298 K, pH 10, and 0.5 M boron concentration, over two times higher than the commercial resin IRA743 (2.07 mmol·g −1 ). The adsorbents performed efficiently across both high and low boron concentrations, owing to their ability to selectively recognize and adsorb boron based on solution boron speciation. This work not only advances high-performance boron adsorbents but also deepens fundamental understanding of boron adsorption.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 13.2
Zhifu Liu,Guanghui Shi,Shuzhuang Sun,Yong Wang,Jingyue Shang,Songbai Hu,Wenkang Deng,Chuhan Fu,Chenghao Liu,Xiao Wang,Tao Qi,Guoping Hu
Mordenite (MOR) is a widely recognized zeolite for direct air capture (DAC) of CO 2 , attributed to its high adsorption capacity and low adsorption heat. However, current approaches to promote Na + enrichment in 8-member ring channel (8-MRz) of MOR through regulating the Si/Al ratio or controlling Al distribution are constrained by synthesis controllability and cost, limiting further adsorption capacity improvements. Here, we demonstrate a straightforward and effective modification of Na-MOR via Li + -exchange, improving its performance for DAC of CO 2 . Due to its higher charge-to-size ratio compared to Na + , Li + concurrently enlarges aperture size and enhances pore polarity of 8-member ring side pocket (8-MRy). This synergistic spatial and energetic interplay resulted in Li 0.90 Na-MOR exhibiting faster kinetics and a higher CO 2 adsorption capacity (1.42 mmol g −1 ) at 400 ppm compared to Na-MOR (1.02 mmol g −1 ). In situ diffuse reflectance infrared fourier transform spectra (DRIFTS) and density functional theory (DFT) analyses confirm that Li + exchange augments charge density within the confined space of 8-MRy, promoting stable co-adsorption of multiple CO 2 molecules. This work advances the understanding of confinement effects on CO 2 adsorption and paves the way for advanced adsorbent design.
✓ 已验证
DOI
高影响因子
Surfaces and Interfaces
·
2026
·
IF 6.3
Xue Yang,Miao Yu,Tao Hang,Wenjing Chen,Xianming Chen,Mingji Zhou,Chunqin Yang,Jianjun Zhang,Houwen Liu,Zongyi Ma,Min Zhu,Yuanming Chen
Corrosion inhibition performance of three imidazole derivatives, including 1,1′-sulfonyldiimidazole (SDI), 1,4-bis[(1H-imidazol-1-yl)methyl]benzene (BIMB), and 1,1′-carbonyldiimidazole (CDI), was investigated for copper corrosion in acidic etching solutions with 10 mmol L⁻¹ above corrosion inhibitors at 25 °C. Quantum chemical calculations and molecular dynamics simulations were performed to elucidate their adsorption behavior of the inhibitors on copper surfaces, and electrochemical measurements were used to evaluate their adsorption mechanisms. Furthermore, surface morphology characterization and etch factor analysis were conducted to assess the microstructural changes and etching efficiency of copper. Among the three inhibitors, CDI exhibited the best corrosion inhibition performance. Electrochemical testing results revealed that cathodic suppression dominated the corrosion inhibition of three inhibitors on copper: SDI and BIMB had the inhibition efficiency of <50%, whereas CDI had the highest charge transfer resistance for the inhibition efficiency of 72.01%. In the presence of CDI, the copper lines with line width/line spacing of 60 μm/60 μm and 30 μm/30 μm respectively achieved an etching factor of 16.55 and 13.24, outperforming BIMB and SDI. This work provides theoretical and experimental insights into the design of high-performance imidazole-based corrosion inhibitors for copper etching to fabricate copper lines of printed circuit boards.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.7
Junyan Wang,Jianhui Wang,Laixiang Zhu,Na Zhang,Nannan Xu,Fuhao Liu,Yanqing Wang,Chuanhui Gao
Constructing integrated multifunctional hydrogels with both high toughness and diverse functionalities is beneficial for the development of flexible antibacterial materials and wearable sensors. However, current hydrogels often fail to achieve a synergistic balance among toughness, antibacterial activity, and sensing responsiveness, limiting their practical applications. Herein, a “nano-bridge” strategy is proposed to fabricate a double-network hydrogel system (PHS-CT) composed of a covalent polyacrylamide network and a dynamic borate-crosslinked hydroxypropyl guar gum/sodium alginate network. The incorporated Cu-TA nanosheets serve not only as “structural bridges” to enhance the crosslinking density and mechanical performance (strain up to 1997.7%, toughness up to 1.53 MJ/m 3 ), but also as “functional bridges” to enable photothermal conversion and improved antibacterial activity (bacterial killing rate of 99.0% against E. coli under NIR irradiation). In addition, benefiting from the dynamic reversibility of borate ester bonds as well as the re-forming capability of hydrogen bonds at the fracture interface, the hydrogel exhibits favorable self-healing ability (self-healing efficiency up to 91.0%), and can function as a flexible strain sensor capable of accurately detecting both large-scale and subtle deformations. This strategy provides a feasible strategy for constructing multifunctional dual-network hydrogels, and may be useful for photothermal antibacterial and flexible sensing applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2026
·
IF 6.9
Yifei Huang,Hongliang Dai,Hongye Bai,Weiqiang Fan
Biomass materials as an abundant renewable resource could replace traditional fossil fuels and non-renewable materials, providing a new solution to achieve sustainable development. In this paper, Ce-modified Co(OH) 2 /Cu 2 O composite catalysts were prepared by an electrodeposition method, and the CoOOH/CuOOH dual active sites were successfully obtained through an electrochemical reconfiguration strategy, and the experimental results showed that the incorporation of Ce induced the formation of high-valent Co and Cu species, which improved the activity of electrocatalytic HMF oxidation. At 0.55 V vs Hg/HgO, the HMF conversion reached 100%, the FDCA yield was 95.04% and the Faraday efficiency was up to 98.47%. These results confirm the effectiveness of Ce-based non-precious metal catalysts in electrochemical reconstruction strategies and demonstrate their potential application in the high-value conversion of biomass derivatives. This finding not only provides a solid research basis for the development of highly efficient catalysts, but is also expected to promote the development of related technological fields.
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2026
·
IF 2.5
Weina Zhang,Hongji Li,Yuming Liu,Mengyang Xu,Dandan Wang
In this study, array structure SERS substrate was designed by using the polydimethylsiloxane (PDMS) as the support membrane and loaded Au@Ag@Au nanoparticles on its surface. By the three-phase self-assembly procedure, the Au@Ag@Au nanoparticles could smoothly transferred on the PDMS membrane and presented array structure, which could significantly promote the SERS sensitivity. Furthermore, molecularly imprinted polymers (MIPs) were coated on the surface of membrane to promote the selective detection property. In order to protect the chemical structure of MC-LR molecules, the Au@Ag@Au/PDMS molecularly imprinted membranes (AAAP-MIMs) were synthesized by the photo-initiated polymerization. It was demonstrated from the results that the AAAP-MIMs exhibited high SERS sensitivity, stability, and uniformity. This investigation presented a novel analysis procedure applied into the toxic microcystin selective detection.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Energy Storage
·
2026
·
IF 9.8
Shenghui Jiao,Yang Li,Xue Liu,Kun Zhang,Sha Luo,Wei Li,Shouxin Liu
The structural design of biomass-based hierarchical porous carbon for supercapacitor applications is significantly impacted associated with carbon–ash removal. Conventional ash removal methods predominantly rely on post-treatment with harsh acids, which considerably impede the commercial viability of biomass. This study presents an innovative approach that integrates oxalic acid hydrothermal treatment coupled with pre‑carbonization, aiming to remove ash from capacitor carbon while effectively controlling the porous structure. Hydrothermal step facilitates dissolution of soluble ash components (e.g., Na/K salts) into the aqueous phase. Concurrently, pre‑carbonization establishes a molten K 2 CO 3 -mediated solid-liquid interface, catalytically converting residual carbon-ash complexes into removable inorganic species. This dual-process synergy enables the resulting material (PH 3 CS-750) to achieve an ultra-low ash content (0.3%), coupled with a high specific surface area (1966 m 2 g −1 ) and a high microporosity (93.64%). Electrochemical tests show that the specific capacitance of PH 3 CS-750 could reach 381.7 F g −1 . More importantly, with commercial loading of 10 mg cm −2 , PH 3 CS-750 demonstrated a specific capacitance of 62.1 F g −1 in 1 M TEABF 4 /PC organic electrolyte. The effective ash removal mitigates irreversible side reactions between impurities and the electrolyte, thereby stabilizing the electrode-electrolyte interface. Consequently, the cycle stability of the material improved to 94.5%, compared to 84.2% prior to ash removal. This work provides a scalable and cost-effective strategy for producing high-performance porous carbon with low ash content and high porosity, paving the way for advanced supercapacitor applications using biomass-derived materials.
✓ 已验证
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2026
·
IF 5.1
Penghao Zhu,Guang Zheng,Kaili Gao,Duoxia Xu,Xiaohua Nie,Yuanchao Lu,Guijie Hao,Xianghe Meng
Size and shape critically influence the optical properties of CsPbBr 3 NCs, but lack sufficient research in sensing. Herein, particle sizes and shapes of CsPbBr 3 NCs were precisely adjusted by room-temperature synthesis method, and sensing performances to peroxide value (PV) of edible oils were investigated. The results found that the particle sizes (4.3 ± 0.2, 6.3 ± 0.2, 8.8 ± 0.3, and 12.9 ± 0.6 nm) of high-crystallized cubic CsPbBr 3 NCs were precisely obtained, and the fluorescence (from 491 to 516 nm) and absorption (from 470 to 526 nm) peak wavelengths redshifted as the particle size increased from 4.3 nm to 12.9 nm. Among four particle sizes, CsPbBr 3 NCs (8.8 nm) demonstrated the optimal sensing performance (wavelength-shifted colorimetric method R 2 = 0.99) for PV detection, achieving a linear response range of 0.02–0.36 g/100 g with LOD of 0.0022 g/100 g and LOQ of 0.0073 g/100 g. Considering the interference from trace moisture in edible oil, a moisture-compensated intensity-quenched colorimetric method was proposed to improve the practical accuracy, with the practical recovery rates from 95%–245% to 90%–119%. Therefore, the proposed methods had good sensitivity, accuracy and practicability, and enlightened the effective technologies for the quality detection of edible oil.
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Chemistry
·
2026
·
IF 6.7
Sibo Deng,Xiaoman Li,Yang Yang,Yue Cao,Guidong Yang,Min Luo
Nitrate photocatalytic reduction holds significant promise for wastewater treatment and green synthesis. In this study, the experimental results showed that the TiO 2 -500 sample, composed primarily of anatase phase with rutile phase heterojunctions, demonstrated superior catalytic performance. Under simulated sunlight, the nitrate reduction rate of this sample reaches 501.74 μmol g cat −1 h −1 within 1h, and the nitrate reduction conversion rate was 91.28 %. Notably, the selectivity of NH 4 + and N 2 was 65.12 % and 32.77 %, respectively, yielding a combined selectivity of 97.89 %. Catalytic activity was found to decrease with increasing rutile phase content. The enhanced performance of the anatase-rutile heterojunction stems from two synergistic mechanisms. First, defect states at the interface act as electron-trapping centers, effectively suppressing photogenerated carrier recombination. Second, the catalyst's retained porous MOF-derived structure provides a high contact area with reactants, thereby accelerating reaction kinetics. Through experimental characterization and theoretical calculations, this work elucidates the charge separation dynamics at the heterojunction interface and the nitrate reduction pathway, offering a strategic approach for designing high-efficiency heterojunction photocatalysts.
✓ 已验证
产品关联
DOI
高影响因子