JOURNAL OF MATERIALS SCIENCE
·
2026
·
IF 4.4
Zhang Liping,Liu Xingmin,Zhao Zihan
Vanadium redox flow batteries (VRFBs) are a critical technology for large-scale energy storage, and their electrode properties directly determine catalytic activity and structural stability. In this study, copper clusters anchored on MXene sheets (MXene/Cu) are designed as a novel electrocatalyst for the V 3+ /V 2+ redox reaction. The catalytic performance was systematically evaluated through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). For battery performance tests, single cells were assembled using plasma-treated graphite felt coated with the MXene/Cu composite as the negative electrode (MXene/Cu/GF). The results demonstrate that MXene/Cu significantly enhances the catalytic activity of the electrode. At a current density of 200 mA cm −2 , the cell employing MXene/Cu/GF as the negative electrode exhibits a 22.53% improvement in energy efficiency compared to plasma-treated graphite felt. Remarkably, after 200 charge–discharge cycles, the composite demonstrates exceptional stability, exhibiting only 5.20% total capacity decay. This superior performance is attributed to the synergistic interaction between Cu clusters and MXene, which introduces abundant active sites on the graphite felt electrode and accelerates the reaction kinetics of the V 3+ /V 2+ redox couple, thereby enhancing overall cell performance. This work confirms that integrating atomic-level catalysts with two-dimensional MXene offers an effective strategy for advancing VRFB technology.
✓ 已验证
DOI
高影响因子
Electrocatalysis
·
2026
·
IF 3.2
Xiao Lili,Yong Zishuang,Jiang Jin,Chen Miao,Cai Yutong,Zhou Zhiqiang
Widespread adoption of electrolytic water splitting for hydrogen production is limited by the high overpotential and slow kinetics of the oxygen evolution reaction. This work presents a bifunctional electrocatalyst of cobalt phosphide-doped porous carbon electrocatalyst (CoP/Co 2 P/C). The catalyst was synthesized via direct pyrolysis of a composite precursor (denoted as Co/Zn-PO@Co-MOF), which consisted of spherical cobalt/zinc phosphate (Co/Zn-PO) coated with Co-based metal-organic framework. The spherical Co/Zn-PO served as a novel and safer phosphorus source, eliminating the need for conventional NaH 2 PO 2 carbonization which releases toxic gases. Although minimally incorporated into the composite precursor, Ni 2+ played two key roles: it primarily functioned to assist the coordination of Co 2+ with 2-methylimidazole on the surface of Co/Zn-PO, and additionally modulated the resulting CoP/Co 2 P ratio. Moreover, the carbonization temperature was a critical variable in converting Co/Zn-PO@Co-MOF into CoP/Co 2 P and affected the final ratio between them. Based on the interfacial synergistic effect between CoP and Co 2 P, along with three catalytic active sites of Co, P and Pyridinic N, the optimized CoP/Co 2 P/C achieved a current density of 10 mA cm − 2 at low overpotentials (η 10 ) of 204 mV for HER and 339 mV for OER. The performance of CoP/Co 2 P/C remains comparable to that of most recently reported cobalt phosphide-based catalysts. Graphical The alternative text for this image may have been generated using AI.
✓ 已验证
DOI
高影响因子
Silicon
·
2026
·
IF 4.1
Liu Yuan,Liu Yuanfei,Fu Jie,Ma Chengliang
This study presents a cost-effective and environmentally friendly approach for fabricating large-area, low-defect Si₃N₄ ceramic substrate materials using tape casting combined with reaction-bonding sintering at 1900 °C. High-purity Si powder and a non-toxic Duramax™ B-1000 binder system were employed as raw materials. Orthogonal experiments (L9(3 4 ) array) optimized key parameters: 45 wt% solid content, 12.0 wt% binder, 0.4 wt% ammonium citrate dispersant, and a PEG-600 plasticizer to binder ratio (R) of 0.7. These conditions produced defect-free green tapes with smooth surfaces, minimal shrinkage, and balanced strength-flexibility properties. During re-sintering, the addition of 4 wt% Si 3 N 4 seeds maximized performance, yielding ceramics with 92.69% relative density, 15.6 GPa Vickers hardness, 6.6 MPa·m 1/2 fracture toughness, 636.1 MPa flexural strength, and 60.74 W·m −1 ·K −1 thermal conductivity. Microstructural analysis revealed elongated β-Si 3 N 4 grains, confirmed by XRD. This work demonstrates a scalable fabrication route for high-performance Si 3 N 4 substrates using economical and eco-conscious processing.
✓ 已验证
DOI
高影响因子
Frontiers of Materials Science
·
2026
·Vol. 20
·期 2
·260774
·
IF 2.3
Bonsu Anita Achiamaa,Zhao Wenyan,Zhang Cailong,Liu Yumin,Xu Yanna,Tian Chuanjin,Fu Shaojian,Wang Chang-an,Xie Zhipeng
Hole-transport-layer (HTL)-free carbon electrode perovskite solar cells (C-PSCs) are promising candidates for low-cost photovoltaic applications, but their performance is still limited by defect-induced recombination and insufficient long-term stability. Herein, ethacridine lactate (EAL) is employed as a multifunctional additive in the perovskite precursor solution to regulate film quality and interfacial properties. Owing to the presence of a carboxyl group in the lactate anion and two amino groups in the ethacridine cation, EAL interacts with undercoordinated Pb 2+ and dangling I − species, which stabilizes the perovskite structure and promotes charge transport across the perovskite/carbon interface. Consequently, the EAL-modified films show improved morphology and reduced defect density, resulting in enhanced photovoltaic performance. The optimized device delivers a power conversion efficiency of 16.54% and retains 80% of its initial efficiency after 1200 h without encapsulation. This work highlights an effective additive-engineering strategy for achieving efficient and stable HTL-free carbon electrode PSCs.
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2026
·Vol. 37
·期 16
·1265
·
IF 3.2
Li Wei,Wu Xiaoyu,Gu Xiaotong,Li Gang,Wang Weitian
In this work, Er x Eu 1−x MnO 3−δ (x = 0, 0.2, 0.5, 0.8, 1.0) ceramics were synthesized via conventional solid-state reaction, and the synergistic effects of phase coexistence and defect chemistry on dielectric properties were investigated. Multiple experimental validations confirm composition-dependent structural evolution from orthorhombic to hexagonal phases, with stable two-phase coexistence occurring at x = 0.5. X-ray photoelectron spectroscopy reveals that this optimal composition possesses the maximum Mn 2+ fraction (35.19%) and oxygen vacancy concentration. The x = 0.5 sample exhibits an ultrahigh dielectric permittivity (ε′ ≈ 3.5 × 10 4 at 1 kHz, 300 K) and a low loss tangent (tanδ ≈ 0.03). Impedance spectroscopy and conductivity analysis verify that phase boundaries and associated defect clusters promote interfacial polarization while impeding long-range charge migration. This study demonstrates that the synergy of controlled two-phase coexistence and defect engineering is a valid strategy for achieving high-performance rare-earth manganite dielectrics.
✓ 已验证
DOI
高影响因子
Food Analytical Methods
·
2026
·Vol. 19
·期 8
·236
·
IF 3
Neng Jing,Yu Jimei,Guo Qian,Wang Yazhi,Wang Yan,Zhang Yilong,Chen Peng,Yang Kai
A molecularly imprinted polymer (MIP) coating for surface-enhanced Raman spectroscopy (SERS) was developed for the detection of sibutramine. Using sibutramine as the template, methyl methacrylate as the functional monomer, 1,4-butanediol dimethacrylate as the cross-linker, and phenylsilane as the initiator, MIPs were synthesized via molecular imprinting on silver nanorod–coated copper rods. The coating specifically recognizes sibutramine in complex matrices such as milk tea. The characteristic peak intensity is proportional to concentration over a linear range of 5–500 ng/mL, with a detection limit of 2 ng/mL. Recoveries for spiked samples ranged from 96.60 to 99.08% with a relative standard deviation of 2.64–8.67%, consistent with HPLC results. The coating exhibits dual functionality: It specifically recognizes and adsorbs sibutramine, and it is reusable. This work presents a novel SERS method for detecting sibutramine in diet foods, offering an accurate, low-cost, and highly selective approach for analyzing complex food systems.
✓ 已验证
DOI
高影响因子
Catalysis Science & Technology
·
2026
·
IF 4
Xiaojuan Bai,Yihan Cao,Dailu Zhang,Chi Zhang
Suppressing ultrafast charge recombination remains a central challenge in semiconductor photocatalysis. Herein, we report a cross-conjugation-driven charge concentration polarization strategy for promoting charge separation in imide-linked porous organic polymers. Two polymers with distinct conjugation topologies, TAPB–PMDA and TAPB–HPMDA, were constructed as model systems to elucidate the relationship between conjugation structure and charge migration behavior. Compared with the TAPB–HPMDA, the cross-conjugated TAPB–PMDA induces asymmetric electron delocalization and establishes a spatial gradient of photogenerated electron density within the polymer framework, which enables efficient charge separation. The locally high electron concentration microenvironment, regulated by charge gradient polarization, activates the CO bonds, significantly optimizing O2 adsorption and activation while stabilizing the ·OOH intermediate. Consequently, this material exhibits a highly selective two-electron oxygen reduction to H2O2 reaction, achieving a yield of 2440.74 μmol g−1 h−1 in pure water along with improved photocatalytic degradation of antibiotics, including rapid removal and significant mineralization of ciprofloxacin. After adding benzyl alcohol as a sacrificial agent, the yield was further increased to 16 350 μmol g−1 h−1. This work provides mechanistic insight into how molecular polarization in porous organic frameworks influences reactive oxygen species generation, offering a design strategy for developing efficient organic photocatalysts for sustainable water purification.
✓ 已验证
DOI
高影响因子
Catalysis Science & Technology
·
2026
·
IF 4
Shixuan Li,Dongha Huang,Jiao He,Vasanthakumar Vasudevan,Boqing Chen,Wenjie Zhang,Tingting Wu,Xiao Wu,Xiao yan Xiang,Jinqing Lin
Nitrogen doping serves as a viable strategy to improve the activity of heterogeneous Fenton-like catalysts, whereas the practical deployment of Fenton-like technology is restricted by the complexity of nitrogen-doping procedures. Herein, a in-situ nitrogen-doped Fenton-like catalyst was synthesized through calcination from an in-situ iron-incorporated hyper-cross-linked polymer, where aniline functions as both carbon and nitrogen source while FeCl3 serves dual roles as catalyst for the polymerization and iron precursor. The resulting α-Fe2O3/N-CHCP materials were systematically evaluated for methylene blue (MB) degradation via heterogeneous Fenton-like reactions. Comprehensive characterization demonstrates that nitrogen doping effectively modulates the electronic structure of the carbon matrix, facilitating enhanced charge transfer kinetics and promoting efficient ≡Fe3+/≡Fe2+ cycling for superior H2O2 activation. The optimized α-Fe2O3/N-CHCP-2 catalyst exhibits exceptional catalytic performance, achieving complete removal of MB (100 mg L−1) within 15 min under neutral conditions (pH 7.3) with a high apparent rate constant (kobs) of 0.4732 min−1 significantly surpassing the N-free α-Fe2O3/CHCP catalyst (kobs = 0.0159 min−1). The α-Fe2O3/N-CHCP-2 catalytic system also demonstrates remarkable operational flexibility, maintaining high efficiency across a broad pH range (3-10) and in the presence of some common inorganic coexisting ions. Mechanistic investigations, supported by quenching experiments and EPR spectroscopy, reveal that hydroxyl radicals (•OH) are the predominant reactive species, whereas superoxide radicals (•O2−) contribute secondarily to the degradation process. This work establishes an effective synthetic approach for constructing advanced in-situ N-doping and metal-nitrogen-carbon coordination systems with optimized interfacial electron transfer properties, offering promising applications in advanced oxidation processes for wastewater remediation.
✓ 已验证
DOI
高影响因子
JOURNAL OF NANOBIOTECHNOLOGY
·
2026
·
IF 15
Lifeng Ding,Xiufei Teng,Wei Du,Yonghao Zhang,Baozhe Liu,Shang Piao
This study introduces CA@PDX HMs, an injectable sustained-release hydrogel system for osteoarthritis (OA) therapy designed to regulate the immunometabolic microenvironment via the AMPK/PPARγ signaling pathway. The hydrogel consists of Protectin DX (PDX)-loaded microspheres embedded within an OHA/CMC-ADH matrix and is fabricated using a microfluidic strategy to achieve high encapsulation efficiency and controlled drug release. PDX demonstrated anti-inflammatory effects by suppressing pro-inflammatory cytokines and promoting M2 macrophage polarization. In vitro, CA@PDX HMs reduced chondrocyte apoptosis and matrix degradation, restoring key cartilage components. In an ACLT-induced OA rat model, intra-articular administration of CA@PDX HMs markedly improved cartilage integrity, reduced OARSI scores, and enhanced IL-10 expression. Transcriptomic analysis revealed significant enrichment of the AMPK/PPARγ pathway, indicating coordinated regulation of metabolic and inflammatory processes. Mechanistic validation further confirmed activation of p-AMPK and PPARγ signaling, accompanied by suppression of inflammatory mediators and remodeling of the local immune microenvironment. These findings highlight the hydrogel's anti-inflammatory, anti-apoptotic, and matrix-protective effects, showcasing its potential as a promising localized treatment for OA with excellent biocompatibility and retention characteristics.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED MATERIALS
·
2026
·
IF 29.1
Ying Pei,Jiaqi Li,Lele Liu,Yuwei Zhao,Weifang Yang,Keyong Tang,Ang Lu
Natural structural proteins such as collagen offer exceptional biocompatibility and mechanical versatility, making them promising candidates for wearable and implantable sensing applications. However, achieving integrated high stretchability, stable electrical performance, and long-term durability in protein-based sensing materials remains a critical challenge. Conventional modification strategies are largely confined to molecular-scale adjustments, which often fail to simultaneously address these functional demands. This study introduces a fundamentally different approach by leveraging Hofmeister-ion engineering to directly regulate the aggregation structure of tropocollagen, which enables a structural transformation from long-range order to entropy-driven disorder. Unlike previous methods that rely on chemical crosslinking or exogenous additives, our strategy selectively disrupts collagen's supramolecular order while preserving its triple-helical integrity, resulting in a highly stretchable and conductive ionic gel with exceptional elasticity (fracture strain 560.00%, elastic range 300.53%, resilience 97.36%), durable ionic conductivity (0.56 S m −1 ), and reliable sensing performance over 1500 tensile cycles. By establishing a new paradigm of mesoscale disordering, this work not only deepens the understanding of ion-modulated hierarchical assembly but also provides a versatile, biocompatible platform for next-generation flexible electronics, soft robotics, and implantable sensing systems.
✓ 已验证
DOI
PubMed
高影响因子
Food Science & Nutrition
·
2026
·Vol. 14
·期 6
·e71934
·
IF 5
Meiyu Yuan,Yihong Li,Zixuan Zhou,Wanting Dai,Xian Cui,Shuang Bi,Xiaoxiao Song
Selenium (Se) exists in various chemical forms, including inorganic Se, organic Se, and Se nanoparticles (SeNPs). However, the mechanisms underlying the interaction between Se and gut microbiota remain unclear. This study systematically evaluated the effects of different polysaccharide-stabilized Se nanoparticles (PS-SeNPs) using an in vitro colonic fermentation model. The results indicate that the molecular properties of polysaccharides (PS) are key factors influencing the gut microbiota-modulating effects of PS-SeNPs. Specifically, high molecular weight and positively charged PS enhance the microbial utilization of SeNPs. Chitosan-based Se nanoparticles (CS-Se) and chitosan quaternary ammonium salt-based Se nanoparticles (HACC-Se) can specifically enrich beneficial bacterial communities, such as Lactobacillus and Bacteroidales , which possess both acid production and Se metabolism capabilities. This enrichment significantly promotes the accumulation of short-chain fatty acids and the generation of selenocystine (SeCys 2 ) and Se-Methylselenocysteine (MeSeCys). Metabolomics analysis further showed significant activation of amino acid biosynthetic pathways. Chitosan oligosaccharide-based Se nanoparticles (COS-Se) and carboxymethyl cellulose-based Se nanoparticles (CMC9-Se) can enrich beneficial microorganisms. However, their bioavailability and microbial assimilation efficiency remain relatively limited. The H 2 SeO 3 group significantly promoted the proliferation of microorganisms such as Enterobacteriaceae, Escherichia-Shigella, and Klebsiella . Our findings could improve understanding of the interaction between Se and gut microbiota.
✓ 已验证
DOI
PubMed
高影响因子
POLYMER COMPOSITES
·
2026
·
IF 4.9
Guan Wang,Zetian Zhang,Lei Zhang,Ting Li,Shanshan Li,Jing Li,Qiang Cao,Junwei Yuan
Surface grafting modification of carbon fiber (CF) faces the challenges due to complex reaction conditions and prolonged reaction time. It is urgent to develop mild and efficient methods for CF modification to meet industrial applications. Herein, we report a novel grafting CF modification technique at room temperature, where polyethyleneimine (PEI) is grafted to the activated CF, followed by amidation via interfacial polymerization. The modified CF is systematically characterized by surface chemical analysis and morphology evaluation. Mechanical testing reveals that the flexural strength and interlaminar shear strength (ILSS) of the modified CF reinforced polyamide 6 (CF-PEI/PA6) composites reach 685.29 and 65.98 MPa, respectively, which are 68.42% and 62.01% higher than those of the desized CF composites. These enhancements are attributed to the synergistic effects of strong covalent bonding, rich active sites, and distributed cross-linking regions brought by the continuous grafting layer at the interface. This method innovatively constructs the resin-like structure on CF surface through fully covalent bonding, offering a mild and efficient pathway for interface modification of composite materials with potential for industrial-scale application. Highlights A mild interface grafting strategy is proposed to improve the CF/PA6 composites. A “polyamide-like” all-covalent bonding layer is built at interface scale. Flexural strength and ILSS increase by 68.42% and 62.01%, respectively. Distributed cross-linking regions optimize stress transfer at the interface.
✓ 已验证
DOI
高影响因子