JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2016
·Vol. 27
·期 9
·9278-9285
·
IF 1.798
Liu Ziyu,Xu Guangliang,Zhang Ming,Xiong Kun,Meng Pingyuan
Cobalt ferrite/reduced graphene oxide (CoFe 2 O 4 /RGO) nanocomposites were initially prepared by the interaction of alkyne-functionalized CoFe 2 O 4 NPs and azide-functionalized graphene oxide (GO–N 3 ) via the Cu (I)-catalyzed click reaction. The morphology and structure of CoFe 2 O 4 /RGO were investigated by means of XRD, FTIR, TGA, TEM, SEM and the electromagnetic parameters were measured by vector network analyzer. For CoFe 2 O 4 /RGO composites with click reaction, the minimum reflection loss could reach −40 dB at 6.8 GHz with a matching thickness of 4.0 mm, and also it had a bandwidth below −10 dB ranging from 5.8 to 8.5 GHz. The CoFe 2 O 4 /RGO composites with click reaction exhibited better microwave absorbing performance than the physical mixture. Furthermore, the covalent ligation between CoFe 2 O 4 NPs and graphene oxide could make the composites have a promising future in electromagnetic wave absorption materials.
研究领域:
材料科学
·
纳米技术
·
电磁材料
·
化学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOLID STATE CHEMISTRY
·
2021
·
IF 3.498
Xiaoqing Xie,Yanfei Wang,Weini Zhou,Can Chen,Zeng Xiong
A new synthetic method was designed to prepare poly (trimesoyl chloride-co-polyethyleneimine) (PEI-TMC). Characterization of PEI-TMC was investigated by FTIR, SEM, EDS , XPS, TGA , and BET. TGA test revealed that the PEI-TMC had excellent thermal stability. The BET specific surface area (4.74 m 2 g −1 ) and pore diameter of about 9.44 nm indicated that PEI-TMC possessed a mesoporous structure. The adsorption behavior of U(VI) on the PEI-TMC was investigated. The thermodynamic analysis showed that the process of PEI-TMC adsorption of U(VI) was endothermic and spontaneous, and the adsorption efficiency was better at higher temperatures. The U(VI) sorption on PEI-TMC was conformed to the Langmuir adsorption isotherm and pseudo-second-order kinetic models . The adsorption mechanism of U(VI) with PEI-TMC was systematically elucidated by XPS and FTIR. Under the best condition, the maximum adsorption capacity of PEI-TMC could reach 212.8 mg g −1 by calculating the Langmuir isothermal model. It indicated that PEI-TMC was a potential adsorbent for the treatment of U(VI)-containing wastewater.
研究领域:
环境科学
·
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
RSC Advances
·
2021
·Vol. 11
·期 23
·14193-14202
·
IF 3.361
Yang Li,Liguo Wang,Yan Cao,Shuang Xu,Peng He,Huiquan Li,Hui Liu
A series of imidazolinium-based porous poly(ionic liquid)s (PILs) with different anions prepared by free-radical copolymerization of an arene-bridged tris-vinylimidazolium salt and divinylbenzene (DVB) were constructed. The as-prepared PILs were characterized by BET, SEM, TEM, TGA and Elemental Analysis (EA), and the results showed that they had plentiful ionic sites, and abundant and stable mesopores. In particular, the density of ionic sites and pore structure of PILs could be controlled by adjusting the content of DVB. Moreover, the PILs were used as efficient heterogeneous catalysts for the decarboxylation of cyclic carbonates to epoxides for the first time. Results showed that the catalytic activity of PILs was positively correlated with the nucleophilicity of the anions in PILs, and PDVB-[PhTVIM]Cl-1 with a chloride anion-enriched skeleton displayed the best catalytic performance. Without any solvent or cocatalyst, PDVB-[PhTVIM]Cl-1 achieved a TOF value of 108.1 h−1 and the yield of butylene oxide of 89.6%, which was even better than the homogeneous IL-based catalysts (TOF value: 8.7 h−1) that had been previously reported. Meanwhile, PDVB-[PhTVIM]Cl-1 also exhibited excellent recyclability and substrate compatibility.
研究领域:
材料科学
·
催化
·
化学工程
·
聚合物化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MOLECULAR LIQUIDS
·
2024
·
IF 5.3
Xier Gong,Jie Wang,Liying Bin,Weirui Chen,Ping Li,Pengran Guo,Zhiliang Chen,Bing Tang
The present study aimed to prepare an aluminum-based nanoflower (Al-NF) adsorbent using wasted aluminum polishing solution as raw materials, which effectively isolated the residues of anti-epidemic related drugs (lopinavir (LPV) and ciprofloxacin (CIP)) from wastewater. A comprehensive characterization approach involving SEM, XRD, BET, TGA, FTIR, and XPS was employed to investigate the adsorption capacity and mechanism of Al-NF towards LPV and CIP. The results revealed that the adsorption process involved both homogeneous and non-homogeneous interactions between the LPV/CIP molecules and the Al-NF surface. According to the Langmuir model calculations, the maximum adsorption capacities of Al-NF for LPV and CIP at 293.15 K were determined to be 32.41 mg/g and 14.43 mg/g, respectively, while their adsorption kinetics followed a pseudo-second-order model more appropriately. Furthermore, the spontaneous exothermic nature of LPV/CIP adsorption on Al-NF was confirmed by thermodynamic analysis. The mechanism investigations indicated that hydrogen bonding, electrostatic interaction, π-π bonding interaction, as well as n-π EDA bonding collectively contributed to the overall adsorption process on the Al-NF surface for both LPV and CIP species. Additionally, the reusability demonstrated by Al-NF highlights its potential as a promising low-cost material for removing anti-epidemic related drug residues from wastewater utilizing industrial hazardous wastes.
研究领域:
环境科学
·
材料科学
·
化学工程
·
废水处理
✓ 已验证
产品关联
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2020
·
IF 7.182
Hao Wu,Shuqian Hu,Chunling Nie,Jiahui Zhang,Huafeng Tian,Weicheng Hu,Ting Shen,Jianguo Wang
Pathogens in the food and environment pose a great threat to human health. To solve this problem, we described a novel route to synthesize antibacterial epsilon-poly-L-lysine (EPL) anchored dicarboxyl cellulose beads. Cellulose beads were prepared via a sol-gel transition method and oxidized by sodium periodate and sodium chlorite to form carboxyl groups. EPL was anchored on the beads using carbodiimide mediated amidation. The structure and morphology of beads were characterized by FTIR, XPS, XRD, SEM, and TGA. After dissolution and regeneration, the crystalline form of cellulose is transformed from cellulose I to cellulose II. The thermal degradation temperature of the beads is 200∼300 °C.The samples displayed excellent antimicrobial activity against Staphylococcus aureus , Alicyclobacillus acidoterrestris and Escherichia coli within 12 h. The beads could be biodegraded in soil after 20 days. The biodegradable beads exhibited great potential in food and environmental applications.
研究领域:
材料科学
·
化学
·
生物技术
·
环境科学
·
食品科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Nano Materials
·
2023
·
IF 5.9
Meili Guo,Gang Zhang,Ruoli Zhao,Huizhen Ma,Yuxing Yan,Shuyu Yang,Jian Meng,You Huang,Xiao-Dong Zhang,Hao Wang,Ruiping Zhang
Near-infrared-II (NIR-II) imaging has shown great potential in medical diagnosis and surgical navigation, but developing safe, photostable, high-brightness molecular probes remains a great challenge. Due to their ultrasmall size resulting in highly efficient renal clearance, gold nanoclusters have shown great clinical potential. In this work, we systematically explored the effect of different ligands on the luminescence and bioactivity of gold nanoclusters. Our results show that gold nanoclusters protected by thioglycolic acid (TGA) and 6-mercaptohexanoic acid (MHA) exhibit the strongest fluorescence, while 3-mercaptopropionic acid (MPA)- and sodium sulfide (Na2S)-protected gold nanoclusters show the weakest NIR-II signal. Further doping showed that the Cd-doped MPA and MHA-protected gold nanoclusters exhibited enhanced fluorescence, but the cysteine (Cys)-, glutathione (GSH)-, and Na2S-protected gold nanoclusters showed fluorescence quenching after doping, indicating significant ligand selectivity. Because of the unique multi-energy structure and the large number of electronic states at the highest occupied molecular orbital energy level, MPA- and MHA-protected gold nanoclusters exhibit high stability and photostability. In addition, gold nanoclusters with different ligands exhibited different selective enzyme-mimicking activities of peroxidase (POD), superoxide dismutase (SOD), and catalase (CAT). Imaging in vivo showed that gold nanoclusters could accomplish reliable imaging of cerebral vasculature, hindlimb vessels, and spine as well as monitor renal clearance. The stable nanoclusters allow the time window of imaging to reach 125 min for hindlimb imaging and 270 min for spinal imaging. The gold nanoclusters exhibit a high signal-to-noise ratio of up to 11 for whole-body imaging and show efficient renal clearance and low toxicity at an injected dose of 50 mg/kg.
研究领域:
生物医学工程
·
纳米技术
·
医学成像
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
REACTIVE & FUNCTIONAL POLYMERS
·
2018
·
IF 2.975
Haiyang Wu,Yuntong Li,Birong Zeng,Guorong Chen,Yuzhe Wu,Ting Chen,Lizong Dai
In order to improve thermal and flame-retardant as well as mechanical properties of epoxy resins efficiently, a new P/N/Si-containing nano-filler called 2,4-(bis-polyhedral-oligomeric-silsesquioxane)-6-[(bis-9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-yl)amine]-(p-4-hydroxyphenyl)-1,3,5-triazine (abbrev. PDT) was synthesized by nucleophilic aromatic substitution reaction and was combined with curing-agent to prepare epoxy resin composites, incorporating both nanocaged framework of Si O and rigid phenyl-rings from triazine and DOPO into the epoxy matrix at molecular level. The prepared EP-PDT composites were characterized by means of techniques such as TGA-IR, Raman, SEM, EDX analysis, Py-GC/MS and XPS etc. It showed that all samples had a single T g , indicating that these epoxy composites were homogeneous phase for long-term use. Both the LOI value and char yield increased with the increasing of PDT content, while the corresponding PHRR and THR data of EP composites dropped. SEM revealed that PDT in EP composites self-assembled into nano-sized particles, resulting in an enhanced mechanical property. Py-GC/MS and XPS characterizations showed that PDT could release free radicals and promote the char formation deriving from the synergic effect of phosphorus, nitrogen and silicon during combustion, which resulted in the formation of quenching and barrier effects to endow the EP composites with excellent thermal stability and flame retardancy for potential applications in many fields.
研究领域:
材料科学
·
高分子化学
·
纳米技术
·
消防安全工程
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2024
·Vol. 35
·期 30
·1-12
·
IF 2.8
Liu Wei,Zhang Weichao,Shen Fenglei
In this paper, 3-glycidyl ether oxypropyltrimethoxysilane (KH560) was incorporated into the reaction product of polyether amine (2-APPG) and polyethylene glycol diglycidyl ether (PEDGE) to create an organic-inorganic hybrid polymer. The hybrid polymer underwent the catalytic hydrolysis of a hydrochloric acid-ethanol solution and was then swelled in the liquid electrolyte containing lithium bis(trifluoromethanesulfonyl) imide (LiTFSI) to form the novel hybrid polymer electrolyte (GPE). The TGA results indicate that the samples underwent a 4% mass loss within the temperature range of 25 °C to 280 °C. The electrochemical test results show that the conductivity of the GPE reaches 1.57 × 10 −3 S/cm at room temperature, and the lithium-ion transference number (t + ) reaches 0.22. In addition, electrochromic devices prepared with APK-1 as the electrolyte exhibit good light density change (∆ (OD) = 0.134), coloring efficiency of 153.3 cm 2 /C, and stability with 400 stable cycles within the voltage range of -2.5 V to 2.5 V. The above tests demonstrate the enormous potential of the proposed GPEs in the application of electrochromic devices.
研究领域:
材料科学
·
电化学
·
高分子科学
·
电致变色器件
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2020
·Vol. 137
·期 45
·49405
·
IF 2.52
Yankun Xie,Weiqu Liu,Liyan Liang,Chunhua Liu,Maiping Yang,Hongyi Shi,Shuo Wang,Fengyuan Zhang
In this study, the silica network and functionalized graphene oxide (GO) were incorporated into the epoxy coating systems, which was aimed to improve the thermal property and corrosion resistance of epoxy coatings. First, tetraethyl orthosilicate (TEOS) oligomers and epoxy hybrid was fabricated through sol–gel method. Then the (3-aminopropyl) triethoxysilane (APTES) modified graphene oxide (FGO) was added into the epoxy hybrid composite to obtain anticorrosion coatings. Fourier transform infrared spectroscopy, thermogravimetric analysis (TGA), Raman spectrum, and X-ray photoelectron spectrum were conducted to evaluate the structural information of GO and APTES modified GO nanosheets. The results indicated that the APTES successfully grafted onto the surface of GO sheets. Besides, TGA curves, electrochemical measurements and salt spray test were also carried out to characterize the thermal performance and corrosion resistance of GO based epoxy coatings. The TGA results revealed that the thermal performance of epoxy coating containing silica network and FGO nanofiller (ES/FGO) was significantly strengthened compared to pure epoxy. The initial degradation temperature of epoxy coating was increased from 300 to 343.7°C after incorporation of silica component and FGO. The EIS measurements demonstrated that the impedance modulus of ES/FGO was significantly higher than neat epoxy, which indicated that the corrosion resistance of epoxy was substantially strengthened after introduction of silica component and FGO. The corrosion rate and inhibition efficiency of epoxy composite coatings were also shifted from 1.237 × 10 −7 mm/year and 76.6% (for neat epoxy) to 1.870 × 10 −9 mm/year and 99.6% (for ES/FGO), respectively. The salt spray test also revealed that the silica and FGO can improve the corrosion resistance of epoxy coating. Additionally, the dispersion of GO sheets was also enhanced after the modification of APTES siloxane.
研究领域:
材料科学
·
化学工程
·
腐蚀科学
·
高分子化学
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2019
·
IF 8.355
Renjie Chen,Xinyu Huang,Ruizhi Zheng,Delong Xie,Yi Mei,Ruqiang Zou
Organic phase change materials are flammable, which limits their applications in heat storage and conversion. In the presented study, a phosphorus-grafted hexadecanol was blended with pentaerythritol phosphate (PEPA) to prepare flame-retardant phase change material (FRPCM). The thermal properties of FRPCM were evaluated by means of differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and cone calorimetry. The flame-retardant mechanism was examined by thermogravimetric analysis-Fourier transform infrared spectrometry (TG-FTIR) and scanning electron microscopy (SEM) tests. The FRPCM maintains a promising heat storage capacity (186.9 J/g) and thermal stability after grafting and blending. The flame retardance analysis reveals that the grafted phosphorus group helps to promote char formation. PEPA extends the time before exposed combustible material ignites. The cone calorimeter test demonstrated that the peak heat release rate and total heat release are further decreased by more than 50%, owing to the synergistic effect between the phosphorus group and PEPA. The SEM results showed that a porous structure is formed during combustion. Self-extinguishment testing indicates that the FRPCM is extinguished in a much shorter time than is hexadecanol.
研究领域:
材料科学
·
热能工程
·
能源存储
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
·
2023
·
IF 3.4
Cheng Fang,Chaobo Wu,Xiaoyan Zhao
Cross-linked acrylate latex pressure sensitive adhesives (PSAs) were synthesized via unseeded semi-batch emulsion polymerization processes with butyl acrylate (BA), acrylic acid (AA), 2-hydroxyethyl acrylate (HEA) and difunctional cross-linker, ethylene glycol dimethacrylate (EGDMA). The influences of EGDMA on the comprehensive properties of the acrylate latex PSAs were investigated. The results indicated that both viscosity and particle size of the latexes were independent of the amount of EGDMA in the pre-emulsion feed when unseeded semi-batch emulsion polymerization process was employed. It was also found that water resistance of the latex PSA was improved with increasing EGDMA content, further confirmed by water contact angle measurements . DSC and TGA results showed that T g of the copolymer was elevated, plus thermal stability was increased with introduction of EGDMA. Besides, with the increase of EGDMA content, the gel content of the polymer increased. Moreover, for the cross-linked adhesive film , the shear strength was improved greatly while at the sacrifice of loop tack and peel strength, when compared with the uncross-linked counterparts.
研究领域:
材料科学
·
聚合物化学
·
粘合技术
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Research and Technology-JMR&T
·
2022
·
IF 6.267
Bo Xu,Simiao Wei,Yanting Liu,Siheng Zhao,Lijun Qian
An organo-cobalt coordination complex (Co-H4APD), based on phosphonitrile-azacycles, was prepared by hydrothermal method . The flame retardancy, smoke suppression and thermal stability of epoxy (EP) composites were investigate by means of limited oxygen index (LOI), cone calorimeter test (CONE) and thermogravimetric analysis (TGA). The flame retardant modes of action of Co-H4APD in EP were confirmed by experiments, such as thermogravimetry-Fourier transform infrared spectroscopy-gas chromatograph/mass spectrometer (TG-FTIR-GC/MS), exploring condense and gas-phase products after composites pyrolysis or combustion. Results revealed that the introduction of 6 wt.% Co-H4APD increased LOI value to 29.8% and effectively suppressed heat/smoke release of EP composites. The synergistic charring effect of Co-H4APD improved the thermal stability and char-forming ability of composites. The char strength may be well-correlated with gas release for EP/Co-H4APD, conducive to form dense and regularly expanded char layer, with more phosphorus-rich graphitic structures and cross-linking structures catalyzed by cobalt ions . This high-quality char layer was regarded as the most critical side in improving the flame retardant and smoke suppression performance of EP composites. The gas-phase function of Co-H4APD should not be overlooked due to releasing phosphorous-based radicals during pyrolysis, exhibiting flame inhibition effect in gas phase. More efficient interactions between phosphazene and cobalt within one molecule unit of Co-H4APD contributed to its more obvious reduction of the combustion and smoke production than those of the physical mixing system of CoO + H4APD.
研究领域:
材料科学
·
化学工程
·
高分子科学
·
消防安全科学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）