JOURNAL OF FOOD PROCESS ENGINEERING
·
2026
·Vol. 49
·期 7
·e70700
·
IF 3.5
Yi Yang,Shutian Ma,Jinyuan Zhang,Manling Zhang,Hongyu Zou,Zhuang Shi,Jinglin Zhang,Zhenyu Wang,Yuang Zhang,Liming Zhang,Enjie Diao
This study investigated the effects of moderate germination (4°C, 65%–75% RH, sprout length less than 1 cm) on the physicochemical properties and antioxidant capacity of raw and aged black garlics. Moderate germination significantly increased the contents of fructose, glucose, alliin, allicin, total flavonoids in raw garlic, which improved by 33.68%, 31.47%, 5.61%, 38.21%, and 90.91%, respectively. It also resulted in the obvious rise in alliin, total polyphenols, and total flavonoids in black garlic aged from germinated raw garlic, and rose by 29.01%, 26.96%, and 51.22%, respectively. The antioxidant capacity of germinated raw garlic and its aged black garlic was also significantly improved. While germination promoted the formation of 5-hydroxymethylfurfural (5-HMF) (increased by 55.47%) and inhibited the production of acrylamide (decreased by 49.91%) in aged black garlic. It did not significantly affect the color of raw and aged black garlics. Moderate germination is an excellent strategy to improve the nutritional contents and antioxidant capacity of raw and aged black garlics, which displays a promising alternative for developing functional foods from moderately germinated raw garlic and its aged product.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Energy Storage
·
2026
·
IF 10.7
Yu-Han Yuan,He-Jie Wu,Jia Liang,Hai Huang,Gui-Fang Li,Jin-Wei Yan,Shuang-Lin Cai,Yong-Qi Ye,Ye Zeng,Ming-Ming Tao,Xiao-Hong Fan,Yi Li,Ding-Rong Deng,Qi-Hui Wu
Driven by the global push for sustainable energy, supercapacitors are regarded as competitive energy storage systems. Nevertheless, boosting their energy density and cycling durability remain core challenges. Herein, a La 2 O 3 /Al 2 O 3 heterostructure (La-Al-O) is in-situ fabricated on nickel foam (NF) via a hydrothermal route. Electrochemical activation converts crystalline La 2 O 3 into amorphous La 2 O 3 , triggering structural reconstruction: interwoven nanosheet networks evolve into loose, crumpled nanosheets. This transformation enriches oxygen vacancies and generates Ni(OH) 2 on NF to create abundant ion-accessible active sites, while Al 2 O 3 serves as a structural stabilizer against framework collapse (activated La-Al-O, abbreviated A-La-Al-O). In terms of electrochemical performance, the A-La-Al-O/NF electrode exhibited a high specific capacitance of 4.60 F·cm −2 at a current density of 5 mA·cm −2 . After 20,000 cycles at a scan rate of 20 mA·cm −2 , the cycle retention rate was 75.7%. For the assembled asymmetric device (denoted as A-La-Al-O/NF/activated carbon (AC)), an energy density of 49.41 Wh·kg −1 was achieved at a power density of 889.38 W·kg −1 , with a cycle retention rate of 82.5% after 20,000 cycles. This study adopts method combining hydrothermal and electrochemical activation without the need for binders, featuring a simple and convenient process. It provides a new insight for the high-value utilization of rare earths and the development of high-performance supercapacitors.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Wang Lv,Shangkai Qiu,Lu Xiong,Zhiyong Yan,Hou Wang,Yan Wu
Mo 4d-S 3p orbital hybridization effectively reshapes the electronic band structure. • Sulfur vacancies shift from recombination centers to efficient charge-transfer channels. • Mo S Ni bridging orbital channels establish a robust built-in electric field. • Mo–Ni orbital synergy enables a highly selective 2e⁻ oxygen reduction pathway. This work addresses the fundamental dilemma between charge separation efficiency and surface reaction selectivity in heterogeneous photocatalysis through synergistic orbital engineering. By introducing Mo dopants and sulfur vacancies (V S ) into Zn 3 In 2 S 6 , the localized electronic states of isolated V S are transformed into delocalized charge channels via strong Mo 4d-S 3p orbital hybridization. This orbital-level modulation effectively suppresses charge recombination while optimizing the band structure for visible-light absorption. Coupled with in-situ grown Ni 4 S 3 , an interfacial Mo-S-Ni orbital bridge is constructed, which not only establishes a robust built-in electric field to direct electron flow toward Ni 4 S 3 but also tailors the local coordination environment for selective two-electron oxygen reduction. The resulting heterojunction photocatalyst achieves an exceptional H 2 O 2 production rate of 163.0 ± 2.1 μM h −1 in pure water without any sacrificial agent. Notably, the H 2 O 2 production rate of 252.1 ± 2.4 μM h −1 is attained at a tetracycline hydrochloride (TC) concentration of 20 mg L −1 , 1.5 times higher than that in pure water. This study demonstrates that precise orbital coupling can integrate carrier dynamics management with reaction pathway control, providing a new design paradigm for noble metal-free, high-performance and multifunctional photocatalytic systems. Download: Download high-res image (216KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.7
Jian Li,Peilin Qing,Weishuang Fang,Yang Yang,Yuandong Qin,Huaicheng Xiang,Ying Tang,Liang Fang
Two tetragonal scheelite Ag 0.5 RE 0.5 MoO 4 (RE = Nd, Y) ceramics with space group I 4 1 / a were synthesized via the solid-state reaction method. Ag + and RE 3+ co-occupy the dodecahedral A-site, while Mo 6+ occupies the tetrahedral B-site. Ag 0.5 Nd 0.5 MoO 4 sintered at 825 ℃ shows a higher Q × f of 92,000 GHz, with ε r = 12.14 and τ f = -62.85 ppm/℃. Ag 0.5 Y 0.5 MoO 4 sintered at 850 °C exhibits ε r = 12.96, Q × f = 56,000 GHz, and τ f = -46.22 ppm/℃. The structure-property relationship was systematically investigated using bond valence, ionic polarizability, Raman spectroscopy, and P-V-L chemical bond theory. The larger deviation Δ ε r in Ag 0.5 Y 0.5 MoO 4 originates from the stronger overall cation rattling effect and the insufficient average ionic bonding caused by its more negative weighted average deviation factor < d > . Q × f is strongly dependent on lattice vibration damping, conductive activation energy, lattice energy, and stability of rare-earth ions. Positive τ αm values mainly govern the sign and magnitude of τ f , and the intense rattling effect of Y 3+ drives τ f closer to zero. Finally, a cylindrical dielectric resonator antenna (CDRA) was designed and simulated using Ag 0.5 Nd 0.5 MoO 4 ceramic, demonstrating its potential for high-frequency communication applications.
✓ 已验证
产品关联
DOI
高影响因子
Petroleum Science
·
2026
·
IF 6.4
Kai-He Lv,Xue-Hao Zhang,Xian-Bin Huang,Jin-Sheng Sun,Yu-Zhe Zhang
Maintaining rheological stability of high-density water-based drilling fluids (WDFs) under high temperature conditions remains a formidable challenge for deep-well drilling operations. In this study, a zwitterionic polymer thinner (ZPT-3) was synthesized and systematically evaluated in both weighted mud (WM) and weighted polymer mud (WPM) systems through comprehensive rheological testing. Total organic carbon (TOC) analysis, focused beam reflectance measurement (FBRM), and optical microscopy were employed to investigate the mechanism of ZPT-3 in regulating the rheological behavior of high-density WDFs. ZPT-3 demonstrated exceptional thermal stability and thinning efficiency, yielding a viscosity reduction rate of 66.3% in complex WPM at 2 wt% after aging at 200 °C, significantly surpassing conventional commercial thinners (XY27 and SF260). To facilitate practical engineering applications, a multi-output machine learning (ML) model was developed to accurately predict rheological parameters of WM systems under varying additive concentrations and aging temperatures. These findings highlight ZPT-3 as a promising and robust thinner for high-density WDFs, with the ML predictive model providing a reliable digital assistant for the design and optimization of drilling fluid formulations.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Juanli Wu,Qiang Wang,Zhibiao Chen,Jinyang Chen,Zuliang Chen
In-situ bio-nano FeS synthesis on SRB cell walls eliminates ex-situ nanoparticle production. • Ternary coupling: biological reduction tunes chemical precipitation for 76.2% REE recovery. • Dynamic bio-nano interface: -NH₂/S=O/-OH/-COOH complexation drives chemisorption (R 2 = 0.999). • Five-cycle reusability (80.7% capacity): practical robustness for continuous mining effluents. • Concurrent REE recovery and sulfate reduction: process intensification for dual pollutant control. The effective recovery of rare earth elements (REEs) from rare earth mine wastewater is a crucial issue for the sustainable utilization of resources and environmental protection. This study demonstrated the concurrent recovery of REEs from mining wastewater by utilizing sulfate-reducing bacteria (SRB) to synthesize FeS nanoparticles in situ. SEM-EDS, XRD and XPS showed that bio-nano FeS (nFeS) precipitated on cell walls within 48 h, forming SRB-nFeS-EPS composites that sequestered 76.2% of total REEs-significantly higher than SRB alone (56.1%), abiotic nFeS (48.3%) or extracellular polymeric substances (EPS) (7.7%). SRB efficiently reduced SO₄ 2− to S 2− in rare earth wastewater (the utilization rate of SO₄ 2− reached 56.7% at 24 h), and simultaneously, S 2− and Fe 2+ underwent chemical precipitation to form nFeS (50–200 nm). A pseudo-second-order (PSO) model (R 2 = 0.999) and five-cycle reusability (80.7% capacity retained) indicated chemisorption dominance and practical robustness. FTIR and 3D-EEM suggested that microbial -NH₂ groups may complex with S O and -OH/-COOH on the nFeS surface, contributing to combined complexation and ion-exchange. Pearson correlation analysis further highlighted C-OH and -NH₂ functional groups ( r ≥ 0.95) and the S 2− -Fe 2+ couple ( r = 0.95) as potential key factors governing REE sequestration and biomineralization synergy. The process is governed by a dynamic ternary coupling of biological reduction, chemical precipitation and adsorption co-precipitation, whose transition point defines the optimum bio-nano interfacial synergy. The findings offer a low-energy route for precise, in-situ REE recovery from sulfate-rich mining effluents.
✓ 已验证
产品关联
DOI
高影响因子
EUROPEAN POLYMER JOURNAL
·
2026
·
IF 6.8
Tengyun Zou,Linquan Wang,Rong Li,Yinxing Zhang,Ran Fu,Long Zheng,Ziwei Li,Shaorong Lu
Thermally conductive natural rubber (NR)-based composites are promising for flexible thermal management applications, but the chemically inert surface of boron nitride (BN) and its weak affinity for nonpolar NR often lead to interfacial defects and limited improvements in properties. In this work, a phosphorus-containing multi-arm silane modifier, denoted as THIP, was prepared through the reaction between tetrakis(hydroxymethyl)phosphonium sulfate (THPS) and 3-isocyanatopropyltrimethoxysilane (IPMS), and was subsequently grafted onto hydroxylated BN to obtain modified BN (ITBN). The introduced THIP layer acted as a molecular bridge at the BN/NR interface by combining silane anchoring groups with branched organic segments. FTIR, XPS, TGA, and XRD results verified the formation of organic silane structures on BN while preserving the crystalline framework of BN. Compared with unmodified BN/NR, the ITBN/NR composites showed fewer interfacial voids, better filler–rubber contact, and improved thermal and tensile properties. At a filler loading of 60 phr, ITBN/NR exhibited a tensile strength of 21 MPa, an elongation at break of 970.7%, and an in-plane thermal conductivity of 0.931 W‧m −1 ‧K −1 , which were 18.38%, 45.84%, and 59.42% higher than those of BN/NR, respectively. Molecular dynamics simulations further revealed that THIP modification narrowed the solubility-parameter difference between BN and NR, decreased the fractional free volume, suppressed NR chain mobility, and improved local interfacial affinity. Overall, these results reveal that the THIP-derived interfacial layer improves filler-rubber interactions and contributes to the simultaneous enhancement of heat transfer and mechanical performance in BN/NR composites.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Yu Jiang,Yinghao Tang,Cheng Tang,Cheng Qian,Si Wang,Xiuquan Xiong,Zipeng Zhang,Mengying Jia,Fangxian Wang,Qiong Liu
A metal-free P/O dual-site functional carbon nitride was synthetized. • P O Lewis-acid centers and O-coordinated electron-rich sites were induced to CN-P5. • CN-P5 removed 5 mg/L APAP within 60 min using 1 mM PMS. • APAP was degraded via hydroxylation, C N scission, ring opening, and mineralization. • PPCPs at realistic level were removed from actual domestic sewage continuously. Peroxymonosulfate (PMS) activation-based advanced oxidation processes provide powerful strategies for persistent pharmaceuticals and personal care products (PPCPs) removal in aquatic environments and wastewater. However, intrinsically sluggish PMS decomposition kinetics and inefficient utilization of reactive species impede their practical implementation. Developing robust, metal-free photocatalysts capable of efficiently activating PMS under mild conditions remains challenging. In this study, a metal-free P/O dual-site functional carbon nitride (CN-P5) featuring localized polarization was rationally constructed via phytic acid-assisted thermal polymerization, enabling efficient PMS activation under visible-light for rapid PPCPs degradation. With 1 mM PMS, complete removal of 5 mg/L acetaminophen (APAP) was achieved within 60 min. The degradation proceeded through hydroxylation, C N scission, ring opening, and progressive mineralization, accompanied by decreasing predicted toxicity of intermediates. Characterizations combined with density functional theory calculations revealed that P atoms partially substitute framework C to generate electron-deficient P O Lewis acid centers, preferentially accumulating photogenerated holes and promoting PMS adsorption. Meanwhile, O atoms coordinate at bridging N sites, giving rise to electron-rich P O units. The synergistic integration of these polarized dual P O dipolar sites boosted PMS activation efficiency. To demonstrate application potential, CN-P5 was packed into a fixed-bed continuous-flow reactor, enabling simultaneous and efficient removal of APAP, norfloxacin and sulfamethoxazole from real lake water matrices. Moreover, the reactor maintains stable removal efficiency for APAP, norfloxacin and ofloxacin continuously at realistic concentrations from actual domestic sewage. Collectively, this work establishes a scalable, metal-free PMS activation platform that couples dual-sites electronic engineering with continuous processing for PPCPs abatement in real waters.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Electronic Materials
·
2026
·Vol. 8
·期 14
·5979-5990
·
IF 4.7
Zhang Wenhao,Chen Sicheng,Xu Ting,Song Chunjun,Zhang Jian,Li Di,Xin Hongxing
PbBi 2 Te 4 is regarded as a promising thermoelectric material due to its complex ternary layered structure. However, its intrinsically high carrier concentration limits its thermoelectric performance. To address this issue, Ni and Se doping was initially employed to modulate the carrier concentration. Nonetheless, the modest enhancement achieved through doping alone suggests that this strategy is insufficient to substantially improve the thermoelectric properties of PbBi 2 Te 4 . Subsequently, solid-state lithiation was systematically investigated as an alternative approach. The incorporation of Li ions into the PbBi 2 Te 4 matrix effectively reduced the thermal conductivity, leading to a significant enhancement in thermoelectric performance. Specifically, after solid-state lithiation of the Ni- and Se-co-doped sample (PbNi 0.04 Bi 1.96 Te 3.6 Se 0.4 ), a maximum figure of merit (ZT) of 0.54 was achieved at 590 K, corresponding to a 68% improvement over the ZT max of pristine PbBi 2 Te 4 . Furthermore, an average ZT of 0.41 was obtained in the temperature range of 300–650 K, representing a 140% increase compared to that of the pristine sample over the same temperature range. These findings offer valuable insights for the further development of PbBi 2 Te 4 -based thermoelectric materials.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING SCIENCE
·
2026
·
IF 5.1
Jie Ji,Chuang Wang,Shiqiang Liang,Wenbin Wang,Huoying Tan,Zhi Geng,Chi Wang
Forward osmosis (FO) technology, characterized by high energy efficiency and low fouling propensity, holds considerable potential in desalination and wastewater reclamation. Nevertheless, the tortuous microporous structure of conventional support layers induces severe internal concentration polarization (ICP), limiting performance enhancement and further application of FO membranes. Here, we report the fabrication of 3D-printing support layers featuring through-pore structures, followed by integrating PES-COOH separation layers to develop a novel PES-COOH-TFC FO membrane. The through-pore architecture of 3D-printing support layers endows PES-COOH-TFC FO membranes with an ultra-low structural parameter, effectively mitigating the detrimental influence of ICP on membrane permeability. Moreover, surface segregation within the ultrathin PES-COOH separation layer promotes carboxyl enrichment on the membrane surface, ensuring superior rejection for the salt solutes. The optimal PES-COOH-TFC FO membrane achieved a water flux of 9.6 L m −2 h −1 and a reverse salt flux of 6.3 mmol m −2 h −1 when assessed using 2 M NaCl draw solution, corresponding to a superior reverse flux selectivity of 1523.8 ± 132.6 L mol −1 . This study transcends conventional structural design by introducing a strategy that leverages high-precision 3D printing technology to optimize FO membrane performance, offering a novel paradigm for the fabrication of advanced separation membranes.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2026
·
IF 9.2
Qingsong Liu,Yan Zhu,Wentao Li,Junci Wu,Yi Zhang,Shouchun Ma,Chuanli Qin
Modified graphitic carbon nitride (MCN) was synthesized via calcinating β-alanine introduced melamine supramolecular precursors and poly(3-methylthiophene-co-fluorene) (P(3MT-co-F)) with improved planarity was prepared by polymerization of 3-methylthiophene (3MT) and fluorene (F) monomers. P(3MT-co-F)/MCN heterojunction was constructed by electrostatic self-assembly and the optimal 3P(3MT 1 -co-F 1 )/MCN exhibits excellent H 2 production performance of 11108 μmol h −1 g −1 under visible light, 150 times higher than MCN. The enhancement is attributed to the following aspects: First, F monomer as a rigid unit can regulate the main-chain torsion of P(3MT-co-F), enhancing planarity and facilitating intramolecular charge transport within copolymer. Second, N⋯S interactions and π-π stacking interactions at heterojunction interface improve the charge transfer and separation. Third, the incorporation of P(3MT-co-F) with narrow band gap into MCN not only broadens visible light absorption range and enhances visible light response, but also forms a Z-scheme heterojunction with MCN, further enhancing the charge separation and retaining the electrons with strong reducibility.
✓ 已验证
产品关联
DOI
高影响因子
Surfaces and Interfaces
·
2026
·
IF 6
Haoyu Zhang,Wei Fang,Xianghui Zeng,Hui Chen,Xing Du,Xuan He,Weixin Li,Daheng Wang,Lei Zhao
An ingenious regional resistance design was first proposed in hydrovoltaic system. • The assembled device can simultaneously optimize hydrovoltaic current and voltage. • The enhanced mechanism is based on the increased current density at the interface. Evaporation-induced hydrovoltaic electricity generation based on the Debye screening effect represents a significant research subject in hydrovoltaic conversion due to its independence of additional power input, but usually suffering from low hydrovoltaic current and output power. In this work, we interestingly proposed a new concept to optimize hydrovoltaic current and voltage via an ingenious regional resistance design based on macro film device, without concentrating on material and structure. The hollow carbon nanospheres, a representative carbon material, was employed as the basis agent for hydrovoltaic conversion, and different carbonization temperature was implemented to acquire gradient resistance. To get partition functional device, the carbon nanospheres that with high resistance were laid at the wetting area to ensure efficient aggregation of charge carriers on solid-liquid interface, for generating reliable potential, while the nanospheres with low resistance were scraped at the non-wetting area that far from the liquid level to promote the transfer of accumulated charges to allow high current. As a result, this assembled device acquires the both advantages of two separated units, which inherits the high hydrovoltaic voltage (∼0.5 V) derived from the high resistance area and the competitive current (∼1.3 μA) from the low resistance one. The output power of this composite film has revealed ∼137 times higher than that of single device constructed by the carbon nanospheres with low resistance. As expected, the COMSOL simulation results verified the key function of the lapped interface on enhancing current density between high resistance and low resistance area. Download: Download high-res image (411KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子