本品为水性硅化剂，专为玻璃试管（采血管）硅化处理设计，可配合偶联剂使用，也可单独使用。在屏蔽玻璃表面羟基、防止血样挂壁的同时，能有效屏蔽试管内壁毛刺，避免刺破血细胞造成溶血，保障血液样本完整性，适用于医用采血管制备领域。
本品为黄色或棕黄色油状粘稠透明液体，有轻微气味。主要成分为聚硅氧烷-多烷氧基醚共聚物。
作用
- 硅化处理后，试管壁性质可较大程度接近血管壁，有效保持血液的原始性状，避免血液成分因容器影响发生改变，保障检测结果准确性。
- 试管内壁经本品硅化处理后，会形成一层均匀的水性保护膜，显著降低血细胞与试管内壁的粘合度，彻底杜绝血样挂壁现象。
- 可优化试管内壁环境，促使血液充分接触采血管内其他添加剂（如促凝剂、抗凝剂等），助力添加剂充分发挥作用，提升临床检测效率。
- 核心防护作用：屏蔽玻璃表面羟基、遮盖试管内壁毛刺，防止毛刺刺破血细胞导致溶血，保障血样完整性。
用法与用量
用纯化水或者95%乙醇溶解，配制成溶液，浓度为1.5%-2%，均匀喷涂在试管或试剂瓶内壁，并且用50℃-70℃热风烘干，烘干时间以彻底烘干为准。
注意事项
1. 本品常温密封保存，气温低于 5℃会凝固，水浴加热溶解即可使用。
2. 本品无毒、无腐蚀性、无环境污染，即便如此，为了您的安全和健康，请穿实验服并戴一次性手套操作。
3. 本品为非危化品，密封防潮保存。
This product is a water-based siliconizing agent, specifically designed for the siliconization treatment of glass tubes (blood collection tubes). It can be used in conjunction with a coupling agent or independently. While shielding the hydroxyl groups on the glass surface and preventing blood from adhering to the tube wall, it effectively masks burrs on the inner wall of the tube, avoiding hemolysis caused by burrs puncturing blood cells, thereby ensuring the integrity of the blood sample. It is suitable for the field of medical blood collection tube preparation.
This product is a yellow or brownish-yellow oily viscous transparent liquid with a slight odor. Its main component is a polysiloxane-polyalkoxy ether copolymer.
Function
1. After siliconization treatment, the properties of the tube wall can closely resemble those of a vascular wall, effectively preserving the original characteristics of the blood and preventing blood components from being altered by container influence, ensuring the accuracy of test results.
After the inner wall of the tube is treated with this siliconizing agent, a uniform water-based protective film forms, significantly reducing the adhesion of blood cells to the inner wall and completely eliminating blood adhesion to the tube wall.
2. It optimizes the inner wall environment of the tube, promoting full contact between the blood and other additives in the blood collection tube (such as coagulants, anticoagulants, etc.), helping the additives to function effectively and improving clinical testing efficiency.
3. Core protective function: Shields hydroxyl groups on the glass surface and masks burrs on the inner wall of the tube, preventing burrs from puncturing blood cells and causing hemolysis, thus ensuring the integrity of the blood sample.
Usage and Dosage
Dissolve in purified water or 95% ethanol to prepare a solution with a concentration of 1.5%-2%. Evenly spray onto the inner walls of the tubes or reagent bottles, and dry with hot air at 50°C-70°C until completely dry.
Precautions
Store this product sealed at room temperature. If the temperature falls below 5°C, it will solidify; it can be dissolved by heating in a water bath before use.
This product is non-toxic, non-corrosive, and environmentally friendly. Even so, for your safety and health, please wear a lab coat and disposable gloves during operation.
This product is not classified as a dangerous good. Keep it sealed and protected from moisture.
ZJ26F0434516
危险品化学品经营许可证（带存储）