ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Fan Fan,Haodan Pan,Huajie Tang,Xinyu Zhao,Chenyue Guo,Qihao Xu,Qixiang Chen,Zhaofeng Dai,Dongliang Zhao
Sub-ambient daytime radiative cooling is a promising approach to energy challenges, but its long-term application is limited by performance losses from dust accumulation. Hydrophobic modification is ineffective at preventing dust embedding into the pores of radiative cooling materials, while traditional protective layers typically either compromise performance or are inconvenient for scalable deployment. Herein, a straightforward strategy integrating a MgO–Y 2 O 3 binary broadband scattering system with a modified SiO 2 low-adhesive protection interface is proposed. Through pore-size design and a hierarchical porous structure, this method realizes a synergy between cooling performance and anti-dust behavior. Specifically, a probability prediction model based on pore–dust particle interactions was developed to guide the optimized design, limiting the average embedding probability of fine dust to <2%. Meanwhile, the low-adhesive interface reduces the critical detachment force for dust motion to <15% of that for conventional radiative cooling coatings. This characteristic enables water-free self-cleaning functionality that can be achieved under mild wind, effectively resolving the conflict between “ideal suitability of radiative cooling for arid regions” and “water-dependent cleaning mechanisms of hydrophobic materials”. Moreover, the coating exhibited environmental durability through rigorous testing, demonstrating significant potential for scalable and practical applications.
✓ 已验证
产品关联
DOI
高影响因子
FOOD HYDROCOLLOIDS
·
2026
·
IF 13.8
Yushi Wei,Hongtao Chen,Deming Gong,Xing Hu,Guowen Zhang
The study aimed to construct a microwave-modified peanut protein isolate (MPPI)–gallic acid (GA)–carrageenan (CG) (MPGC) ternary covalent conjugate, and systematically investigate the effects of glycation covalent modification on the conformation, functional properties and interfacial behavior of MPPI, with the goal of developing new emulsifiers exhibiting superior oil-water interfacial performance. Additionally, the environmental stability of emulsions formulated using the covalent conjugate was evaluated. The results showed that as the proportion of CG increased, the degree of covalent modification significantly enhanced. When the mass ratio of the MPPI-GA conjugates to CG was 1:4 (MPGC4), the grafting degree reached 28.72%. The covalent grafting of CG induced the unfolding of MPPI-GA conjugates structure (decreased β-sheet content and increased random coil content), leading to enhanced surface hydrophobicity and surface charge of the MPPI-GA conjugates. Analysis of oil-water interface characteristics revealed that the MPGC4 conjugates exhibited optimal wettability, significantly reducing the oil-water interfacial tension from 17.34 mN/m to 13.99 mN/m, and demonstrated greater rates of interfacial diffusion, penetration and rearrangement, forming a dense adsorption layer at the interface. The emulsifying activity and emulsion stability of the MPGC4 conjugates were increased to 143.98 m 2 /g and 405.60 min, respectively. When 1.5% (w/v) MPGC4 conjugate was applied to oil-in-water emulsions, the emulsion exhibited a significantly reduced particle size with a more uniform distribution, and excellent environmental stability. This study provides a theoretical basis for the development of novel high-performance plant protein-based emulsifiers.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Materials Technologies
·
2026
·
IF 6
Yingqiao Yang,Lei Zhang,Yikai Zhu,Haonan Zhao,Binglin Cheng,Yuechang Wang,Chonglei Hao
Freshwater scarcity is a critical global challenge, driving the development of high-efficiency atmospheric water harvesting technologies. While fog collection is a sustainable solution for arid regions, conventional passive systems are often limited by poor droplet interception and slow surface renewal. This work proposes a synergistic fog-harvesting strategy combining biomimetic cactus spines (BCS) with electrostatic and aerodynamic regulation: corona charging, airflow guidance, and Laplace pressure-driven transport on cones, which shortens shedding cycles and greatly improves harvesting efficiency. Systematic experiments and fluid dynamic simulations evaluated the influence of applied voltage, wind speed, windward angle, and geometry. The BCS achieved a peak collection rate of 390 mg/min at 18 kV and a wind speed of 2 m/s, representing a substantial enhancement over passive designs. Furthermore, the performance of longitudinal and radial BCS arrays was quantitatively analyzed, leading to a modified saturation model that accounts for airflow interference between adjacent units. The results further determine the optimal working parameters and array layout, which can parametrically adjust aerodynamic airflow regulation and improve droplet transport efficiency. This multi-field coupled design offers a feasible strategy for high-efficiency electric-assisted fog harvesting under complex practical environmental conditions.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED MATERIALS
·
2026
·
IF 29.1
Lvtong Duan,Jinkai Jia,Junchen Liu,Yijie Liu,Weimeng Chu,Jintang Zhou,Jiaqi Tao,Yi Yan,Weize Wang,Zhenyu Cheng,Yucheng Wang,Wenjian Zheng,Haiyan Zhuang,Tianjing Huang,Zhengjun Yao
The rapid growth of electronic devices has intensified electromagnetic wave pollution. Electromagnetic wave absorption (EWA) materials provide a green solution by converting electromagnetic energy into thermal energy. Achieving high-performance EWA requires a fine balance between impedance matching and energy dissipation, demanding precise control of microstructure, interfaces, and electronic states of the materials. However, complex multiscale structures involve strongly coupled structural evolution, which reduces controllability and hinders clear structure–performance correlation. Here, a cobalt-based metal–organic framework (Co-MOF) is employed as the precursor. By regulating the contents of Ni 2 + and Fe 3 + , the structural evolution and the modulation of localized electronic states during the etching process are systematically elucidated. In addition, the in situ competitive coordination and etching-competitive coordination systems reveal the mechanistic differences between atomic-scale induced reconstruction and directional destructive reconstruction. Benefiting from synergistic regulation spanning atomic, nanoscale, and microscale levels, the obtained FeNi/C composite achieves an effective absorption bandwidth of 7.13 GHz at an ultrathin thickness of 1.97 mm. Combining DFT, COMSOL, and CST simulations, the role of etching engineering in enhancing EWA performance is elucidated from electronic, local-field, and macroscopic perspectives, providing a theoretical basis for its controllable application and the rational design of high-performance absorbers.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ANALYTICA CHIMICA ACTA
·
2026
·
IF 6.1
Mengyue Wang,Jinyang Wu,Chengcheng Wang,Dongyu Liu,Ying Wang,Peng Zhao
Ischemic stroke (IS) demands ultra-early diagnosis to improve outcomes, yet conventional imaging modalities often fail to capture the critical window for intervention due to inherent temporal delays. Here, we report a surface-enhanced Raman scattering (SERS)-based plasmonic nanosensor that leverages gold hexagonal nanoparticles (GHNPs) as high-efficiency plasmonic amplifiers to enable simultaneous quantification of two key IS biomarkers-S100β and brain natriuretic peptide (BNP)-directly in whole blood. By engineering a sandwich immunoassay on a silver nanoparticle-modified conductive substrate, the GHNPs generate dense plasmonic “hotspots” that substantially amplify Raman signals, allowing for sensitive and stable detection without sample pretreatment. The sensor was validated in a rat middle cerebral artery occlusion (MCAO) model, capturing dynamic biomarker elevations within hours post-ischemia, and in clinical blood samples from IS patients, where biomarker levels were significantly elevated compared to healthy controls. The platform achieved detection limits as low as 7.18 fg/mL for S100β and 8.98 fg/mL for BNP, markedly outperforming conventional ELISA. By enabling rapid, multiplexed, and highly accurate quantification of these two complementary biomarkers, our SERS platform directly addresses the diagnostic gap between biochemical onset and clinical imaging, offering a powerful tool for ultra-early IS diagnosis and clinical stratification with strong potential for translational application.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·Vol. 36
·期 60
·e76784
·
IF 19.9
Xinyue Chen,Fangxin Zou,Junxiao Mu,Chen Zhuo,Yankai Bo,Zengshuo Liu,Siyuan Dong,Cheng Liu,Yousi Chen,Zhihuan Weng,Jia-Zhuang Xu,Zhong-Ming Li,Shouhai Zhang,Xigao Jian,Hailong Li
Thermo-acoustic insulation aerogels have received increasing attention in the aerospace sector. However, fabricating superstrong thermo-acoustic insulation aerogels via a green and efficient method remains a significant challenge. Herein, superstrong polyethersulfone (PES) aerogels are successfully fabricated via a novel and efficient strategy, integrating freeze casting, etching with water, and mild ambient pressure drying (APD), which involves no extra organic solvents. By tuning the PES concentration, PES aerogels with different morphologies and microstructures are tailored, enabling a tunable property spectrum to meet diverse application needs. Specifically, the 11 wt.% PES demonstrates an exceptional axial compression modulus (36.4 MPa), making it ideal for load-bearing components in aerospace systems. In contrast, the 9 wt.% PES achieves an enhanced acoustic performance (NRC = 0.41), underscoring its potential for construction application. Besides, all PES aerogels maintain low thermal conductivity (0.0397–0.0569 W/(m·K) in the axial direction) and self-extinguishing behavior. Notably, the PES aerogels are fully recyclable, which presents an opportunity to establish a sustainable circular economy. And last but not least, this fabrication strategy is universal and applicable to other engineering plastics. This work establishes a green, cost-effective and scalable pathway to fabricate superstrong thermo-acoustic insulating polymer aerogels, overcoming a key bottleneck toward their industrial adoption.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING SCIENCE
·
2026
·
IF 5.1
Kang Zhou,Shuda Liu,Shoutian Qiu,Lei Wang,Xiang Ying,Ruofan Jiang,Yifei Rui,Daiwen Li,Yong Wang
The separation of ethanol from dilute aqueous solutions, such as fermentation broths, is critically important for biofuel production. Membrane distillation (MD) with porous membranes usually suffers from insufficient selectivity, while pervaporation (PV) with dense films is inadequate in permeability. To overcome this trade-off, we developed a novel hydrophobic membrane via the selective swelling of a polystyrene- b -polydimethylsiloxane- b -polystyrene triblock copolymer (SDS). By precisely controlling the swelling agent and duration, we engineered the optimal membrane with a tailored pore structure featuring interconnected nanopores and partially blind pores, along with a PDMS-enriched pore surface. This unique architecture enables a multipath permeation mechanism combing solution-diffusion and the transport pathway for molecules under vapor–liquid equilibrium within pore channels. The optimized membrane demonstrated an exceptional combination of high permeation flux and separation factor for a 5 wt% ethanol/water mixture at 50 °C, yielding a remarkable pervaporation separation index (PSI) of 38.2 kg·m −2 ·h −1 . This performance surpasses many PDMS-based PV and conventional MD membranes. This work presents a simple and efficient strategy for fabricating high-performance membranes that simultaneously achieve high flux and selectivity, offering significant potential for advancing energy-efficient bioethanol recovery processes.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Energy Materials
·
2026
·
IF 25.5
Xueni Shang,Jike Ding,Taoran Geng,Weiyu Wu,Zhiheng Wang,Hao Liu,Cong Chen
Surface defect chemistry and interfacial energetics remain the primary bottlenecks limiting both voltage output and operational durability in inverted perovskite solar cells. Here we develop a broadly applicable post-deposition surface modification that installs an ultrathin multifunctional molecular layer of 1-(4’-sulfophenyl)-3-carboxyl-5-pyrazolone sodium salt (SCP) at the perovskite electron-contact interface. The sulfonate/carboxylate and pyrazolone O/N motifs cooperatively coordinate undercoordinated Pb 2+ , and the Na + provides additional ionic compensation, contributing to reduced trap-assisted recombination and suppressed interfacial ionic activity. Meanwhile, SCP reconstructs the near-surface electronic structure and band bending, enabling improved energy-level alignment and faster electron extraction. Consequently, the modified devices deliver a champion efficiency of 27.25%. Notably, a third-party certified steady-state PCE (IEC 60904-1:2020, AM1.5G, 25°C) achieved a mean value of 26.84% after 300s aging. The devices further retain 90% of their initial performance after 1485 h of maximum-power-point tracking. This work highlights a general surface-energetics engineering paradigm that couples chemical passivation with interfacial electronic reconstruction, offering a scalable route toward high-performance, durable perovskite photovoltaics.
✓ 已验证
DOI
高影响因子
Journal of Energy Chemistry
·
2026
·
IF 15.6
Feng Chen,Zhuang Ye,Haojie Liang,Haixia Zhang,Junjie Guo
Axial coordination of heteroatoms to the metal sites in M-N-C catalysts exerts a direct modulation of the electronic distribution by forming a bond with the metal center, thereby optimizing its intrinsic oxygen reduction reaction (ORR). However, the steric hindrance introduced by axially coordinated heteroatoms limits reactant accessibility, potentially suppressing the overall catalytic activity. This study provides an HF wet etching strategy to synthesize a hollow porous ZIF-derived nitrogen-doped carbon-supported F-axially coordinated single-atom iron catalyst (F-Fe 1 @HNC), which simultaneously achieves F-axial coordination and high reactant accessibility. Consequently, the F-Fe 1 @HNC catalyst demonstrates outstanding ORR performance in both alkaline (0.919 V) and acidic (0.797 V) electrolytes. When employed as a cathode material in a zinc-air battery, F-Fe 1 @HNC achieves an open-circuit potential of 1.477 V and a power density of 256 mW cm −2 , significantly outperforming commercial Pt/C catalysts. Density functional theory confirmed that F-coordination altered the electronic distribution at Fe-N-C sites, optimizing the adsorption of oxygen-containing intermediates. This work highlights the importance of electron-withdrawing groups in creating the electron asymmetry at Fe-N-C sites, providing profound insights into designing highly efficient ORR catalysts. The F-axis coordinated Fe-N-C catalyst breaks the limitation imposed by spatial steric hindrance and significantly improves the oxygen reduction reaction (ORR) performance. Download: Download high-res image (252KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·Vol. 36
·期 62
·e76841
·
IF 19.9
Lijun Lu,Xingwei Chen,Yujie Zhang,Jing Liu,Chang Liu,Yun Hu,Yanchao Mao
Sustainably derived all-natural conductive hydrogels offer a new class of soft materials with intrinsic biocompatibility, biodegradability, and tunable mechanical properties, showing great promise for flexible bioelectronic interfaces. However, their practical application remains limited by inherently low electrical conductivity. Ion channels in the human nervous system, composed of proteins and oligosaccharides, can reduce the effective radius of hydrated ions by inducing partial dehydration of the hydration shell, thereby enabling highly efficient and ordered ion-proton cooperative transport. Inspired by this ability, an all-natural highly conductive ion-proton bipathway hydrogel (IPBH) composed of bovine serum albumin (BSA), chitosan oligosaccharide (COS), and Ca 2 + was developed to mimic natural ion transport environments and significantly enhance the conductivity. The resulting IPBH achieves a remarkable conductivity of 40.59 mS/cm, which is 1272% and 384% higher than that of the proton-only and ion-only conductive hydrogels, respectively. Besides, the IPBH exhibits complete biodegradability within 36 h and exceptional biocompatibility. Moreover, the IPBH exhibits excellent low-noise performance in physiological signal monitoring, enabling accurate EMG-based gesture recognition integrated with a convolutional neural network (CNN) model for real-time robotic arm control. This synergistically conductive, ion-proton coupled hydrogel provides a versatile and sustainable platform for next-generation high-performance bioelectronic interfaces.
✓ 已验证
产品关联
DOI
高影响因子
COMPOSITES PART B-ENGINEERING
·
2026
·
IF 14
Guoqin Jiang,Jiawei Fan,Zongyi Deng,Minxian Shi,Zhixiong Huang
Lightweight, ablation-resistant, and high-temperature insulating thermal protection materials are critically important for next-generation hypersonic vehicles. This paper proposes a novel gradient structure design strategy that achieves a combination of lightweight, ablation resistance, and high-temperature thermal insulation in ceramizable composites by introducing a gradient distribution of ZrSi 2 –MoSi 2 –B 4 C fillers. Compared with non-gradient ceramizable composite (CC), the gradient structure design reduced the density and thermal conductivity of the composite. Moreover, the ZrSi 2 –MoSi 2 –B 4 C modified carbon fiber/boron phenolic resin gradient ceramizable composite (GCC) exhibited superior ablation resistance and high-temperature insulation performance to carbon fiber/boron phenolic resin composites (CF/BPR). After 20 s of oxyacetylene ablation at 4.2 MW/m 2 , the linear and mass ablation rates were as low as 0.019 mm/s and 0.0279 g/s. After 600 s of butane torch ablation, the backside temperature reached only 397.1 °C, which was lower than that of CF/BPR (408.3 °C). The residual yield of the GCC at 1400 °C in air was 32.7%, significantly higher than that of CF/BPR (7.8%). Owing to the gradient structure design, an ablation-resistant multiphase ceramic layer formed on the surface, which not only enhanced ablation resistance but also blocked and radiated heat, reducing heat transfer. The inner layer, composed of low-density and low-thermal-conductivity CF/BPR, reduced the density and enhanced thermal insulation. This work provides some inspiration for the fabrication of thermal protection materials integrating lightweight, thermal protection, and insulation.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED MATERIALS
·
2026
·
IF 29.1
Yuting Chen,Qing Liu,Yueying Yan,Yang Yang,Bohan Yao,Dongxu Jiao,Huanhuan Xing,Dewen Wang,Xiurong Yang
Developing efficient and stable electrocatalysts for acidic overall water splitting is essential for proton exchange membrane water electrolysis (PEMWE), yet remains a significant challenge. In this work, Ir nanoparticles are anchored onto Fe-doped MoO 2 , yielding a novel material (Ir/Fe–MoO 2 ) with high performance for both acidic oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Fe doping stabilizes the MoO 2 lattice by forming Mo─O─Fe bonds and increases the Mo valence state, effectively suppressing over-oxidation and dissolution. The formed Ir─O─Fe interfacial structures enable bidirectional electron transfer, lowering the Ir oxidation state to prevent deactivation and activating bridging oxygen as Brønsted acid sites. These sites facilitate the deprotonation of oxygenated intermediates via a bridging-oxygen-assisted deprotonation mechanism, bypassing the rate-limiting steps of conventional adsorbate evolution pathways. As a result, Ir/Fe–MoO 2 achieves ultralow OER and HER overpotential in 0.5 M H 2 SO 4 , and a PEMWE device employing Ir/Fe–MoO 2 as both anode and cathode requires only 1.60 V to reach 500 mA cm −2 at 80°C and sustains this performance for 350 h. This work pioneers Brønsted acid sites in a Mo oxide-based matrix, offering a new design concept for cost-effective, highly active acidic OER and HER electrocatalysts.
✓ 已验证
产品关联
DOI
PubMed
高影响因子