CARBON
·
2026
·
IF 12.7
Di Lan,Jun Wang,Yibo Wang,Xiaoming Guo,Dou Du,Chuankun Zhang,Guanglei Wu
Amidst the escalating peril of electromagnetic pollution stemming from high-power and gigahertz-frequency signals, the imperative to engineer efficacious electromagnetic wave-absorbing materials has emerged as a paramount challenge. Traditional absorbers, such as transition metal oxides and their composites, often lack the ability to promptly mitigate the negative impact of heat accumulation and temperature rise in the absorber. In this work, a highly entangled interpenetrating double network hydrogel was prepared using a multi-step compounding and solvent exchange strategy. A magnetic liquid metal (MLM) was then introduced into the hydrogel matrix to simultaneously enhance its thermal conductivity and electromagnetic energy dissipation capabilities. Furthermore, a “temperature and humidity regulating component” was introduced to stabilize the water content of the liquid hydrogel and alleviate localized heat accumulation. Through the synergistic compensation of multiple loss mechanisms and precise control of electromagnetic parameters, the resulting PP@M − LiCl composite exhibited excellent microwave absorption performance. Specifically, at a thickness of only 0.9 mm, the effective absorption bandwidth (EAB) of PP@M-LiCl-4 covered the entire X-band. Furthermore, this hydrogel possesses excellent mechanical properties, with a tensile strength of 0.85 MPa, an elongation at break of approximately 260%, and maintains excellent recovery after high-temperature dehydration. This research provides important theoretical reference and engineering guidance for the design of environmentally adaptable broadband electromagnetic wave absorbing materials.
✓ 已验证
产品关联
DOI
高影响因子
GREEN CHEMISTRY
·
2026
·
IF 10.6
Lei You,Chen Cheng,Shaoqing Liu,Siwei Kuang,Dongming Cai,Danyun Lei,Ying Zheng,Jianwen Liu
The practical deployment of lithium–sulfur (Li–S) batteries is severely hampered by the polysulfide shuttle effect, significant volume changes during sulfur conversion reactions, and dendrite growth on the Li anode. While modifying diaphragms with polar materials like Co3O4 offers a promising solution, their conventional synthesis relies on costly virgin materials and complex processes, raising economic and environmental concerns. Concurrently, the escalating pile of spent lithium-ion batteries (LIBs) presents a critical waste challenge. Hence, a sustainable “waste-to-wealth” strategy is proposed to address both issues simultaneously through the upcycling of spent LiCoO2 (LCO) batteries into a high-value Co3O4-N-doped reduced graphene oxide (Co3O4-rGO) composite, which is employed as a multifunctional diaphragm modifier. The Co3O4 nanoparticles, derived from the spent cathode, are designed to anchor and convert lithium polysulfides (LiPSs), while the N-doped rGO, regenerated from the discarded anode, provides a conductive network and facilitates Li+ transport. This synergistic effect effectively suppresses the polysulfide shuttle, accelerates reaction kinetics, and promotes uniform lithium deposition. Consequently, Li–S batteries equipped with the Co3O4-rGO-0.5 modified diaphragm exhibit exceptional cycling stability and rate capability, retaining a high capacity of 502.9 mAh g−1 after 600 cycles at 3C with an ultra-low capacity decay rate of 0.0437% per cycle, markedly outperforming batteries with conventional diaphragms. This work establishes a scalable, eco-friendly protocol for repurposing battery waste into advanced materials, paving the way for the development of sustainable energy storage systems.
✓ 已验证
产品关联
DOI
高影响因子
Sustainable Materials and Technologies
·
2026
·
IF 9.7
Bei Huang,Hao-sheng Jiang,Jing Zhang
Magnesium oxychloride cement (MOC) is valued for its high early strength and low carbon footprint, but its widespread application is hindered by poor water resistance resulting from the hydrolysis of the 5·1·8 phase. This study employs steel slag as a multifunctional additive to enhance the durability of MOC and further explores the synergistic enhancement pathway via carbonation curing. Replacing 20% of MgO by mass with steel slag yielded a 28-day compressive strength of 96.3 MPa and increased the strength retention ratio after water immersion to 0.80, significantly outperforming the control group (0.53). Microstructural characterization revealed that steel slag particles act as micro-aggregates, densifying the matrix. Simultaneously, the active MgO, SiO 2 , and Al 2 O 3 in the steel slag released their chemical potential: the RO phase (MgO·FeO) released Mg 2+ to maintain a mildly alkaline pore solution, inhibiting dechlorination of the 5·1·8 phase, while the precipitated M-S-H gel forms an impermeable protective film. This synergistic mechanism of “micro-aggregate densification and M-S-H shielding” stabilized the hydration products. Furthermore, by constructing a porous model system, the study confirmed that carbonation curing could drastically enhance the carbonation efficiency to 8.17%. Through pore-filling and skeleton-strengthening via carbonate deposition, the material achieved active carbon sequestration (theoretically 600 kg/t) while attaining superior long-term water resistance and mechanical properties. This research provides a scalable pathway for transforming industrial by-products into high-durability, carbon-negative building materials.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.7
Wei Huang,Yuqi Wang,Quan Yuan,Yiran Hu,Chunmei Wang,Xiaomin Dou,Jun Liu
Addressing water scarcity and pollution in underdeveloped regions requires safe water production from inferior sources. Solar-driven interfacial evaporation (SDIE) coupled with photocatalysis offers great potential for this challenge. Herein, a dual-functional composite (BTG@MS) was fabricated by immobilizing oxygen vacancy- and Ti(III)-rich black TiO 2 /defective g-C 3 N 4 (BTG) on melamine sponge (MS) hydrogel. The composite broadens light absorption to 300–1200 nm (80.7% average absorption efficiency) and forms a type-II heterojunction, facilitating charge separation and reactive oxygen species (ROS) generation. Benefiting from MS’s hierarchical water transport pathways and BTG’s enhanced solar utilization, BTG@MS exhibits outstanding dual performance under one-sun illumination (1 kW/m 2 ), an evaporation rate of 1.26 kg/(m 2 ·h) (74.3% photothermal efficiency) and 84.5% tylosin (TYL) degradation efficiency. It also shows salt tolerance and effectiveness in purifying four types of water sources, producing clean water meeting WHO standards. This work presents an innovative strategy integrating photothermal evaporation and photocatalysis, promising practical application in tackling the water crisis in underdeveloped regions.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Xue Teng,Ning Li,Xiaohan Liu,Xintong Huo,Hong Shao,Yanke Xi,Jiacheng Mi,Dan Li,Guixia Liu,Xiangting Dong
It is crucial to develop color-tunable fluorescent materials with single-matrix. In this study, Electrospinning coupled with oxidative sintering is employed to successfully fabricate CaSnO 3 (CSO):RE 3+ (RE = Tb, Tb/Eu) one-dimensional nanofibers (NFs). To achieve multi-color luminescence and white-light emission in a single matrix, Eu 3+ ions are introduced into CSO:Tb 3+ 1D NFs to gain CSO:Tb 3+ /Eu 3+ 1D NFs. In the CSO:Tb 3+ /Eu 3+ NFs, Tb 3+ ions play a dual role as both luminescent center and sensitizer by virtue of energy level matching engineering. By adjusting the excitation wavelength and doping concentration of Tb 3+ and Eu 3+ ions, the luminescence color of CSO:RE 3+ (RE = Tb, Tb/Eu) NFs can be regulated, achieving multi-color luminescence from blue to blue-green, green, white, and red. Meanwhile, multiple emission peaks in the emission spectra of the CSO:RE 3+ (RE = Tb, Tb/Eu) enable high information storage and anti-counterfeiting capacity.
✓ 已验证
产品关联
DOI
高影响因子
FOOD HYDROCOLLOIDS
·
2026
·
IF 13.8
Shutong Wang,Changyong Cai,Xuhong Guo,Wang Yu,Zhen Zhang,Zhijian Tan
Due to their unique properties, holocellulose nanofibrils (HCNFs) are drawing more and more attention. Residual pectin and lignin may have significant impacts on the redispersion of HCNFs, but relevant studies are lacking. Herein, HCNFs with different residues were prepared from kenaf fibers using careful chemical pretreatments followed by mechanical disintegration. The chemical structure, crystalline phases, morphological features, redispersion properties and intermolecular interactions of different HCNFs were carefully characterized for clarifying the effects of residual pectin and lignin on the redispersion of HCNFs. Residual pectin significantly increased the water redispersibility of HCNFs with an aspect ratio of 241, whereas residual lignin decreased the water redispersibility of HCNFs with an aspect ratio of 48. After 30 days of storage, redispersed pectin-containing HCNFs (P-HCNFs) presented dispersion stability close to never-dried P-HCNFs. The possible mechanism for high redispersibility of P-HCNFs is the formation of synergistic electrostatic and steric repulsion forces between cellulose fibrils, triggered by carboxyl groups in residual pectin and large aspect ratio HCNFs. This study proposes a redispersion strategy for HCNFs isolated from kenaf fibers.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2026
·
IF 10.6
Chengzhi Zhou,Zongyu Yan,Zhenshun Hou,Yanlong Sun,Ya-nan Zhang
Dissolved black carbon (DBC) plays a critical role in the photochemical transformation of emerging contaminants in aquatic systems. However, the source-dependent molecular composition of DBC and its mechanistic influence on contaminant photodegradation remain poorly understood. Here, we characterize the optical properties and molecular structure of DBC derived from five crop straws and evaluate their effects on the photodegradation of antiviral drug abacavir. Results demonstrate that light absorption capacity of five DBC follows the order: DBC rice >DBC peanut >DBC sorghum >DBC wheat >DBC bamboo (DBC X , where X = crop straw). DBC rice is characterized by low molecular weight, high nitrogen content, and lignin-like components, with unsaturation provided by the carbon backbone. In contrast, DBC bamboo exhibits strong reducibility, high sulfur content, and protein-like constituents, where unsaturation is attributed to oxygen-containing functional groups. The distinct molecular composition and structure of DBC rice lead to a higher steady-state concentration of reactive intermediates than DBC bamboo , which accounts for the enhanced photodegradation rates of abacavir. The abacavir is easily transformed via photolysis in waters due to the presence of cyclopropyl and amino functional groups, and reaction pathways mainly involves with hydroxylation, oxidation, hydrogen abstraction, and C-N bond cleavage. This study highlights the critical role of source-specific molecular composition in dictating the photochemical activity of DBC, which is essential for accurately predicting the environmental fate of antiviral drugs in sunlit waters.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry A
·
2026
·
IF 9.2
Rujie Yang,Pengxu Wang,Liuyuan Zhu,Yingjie Di,Yingying Huang,Binjie Zhou,Shujin Wu,Haiping Fang,Shanshan Liang
Graphene oxide (GO) membranes are limited by inherent structural instability and relatively low permeability in aqueous environments, which hinder their practical application in waste water treatment. To address these challenges, we engineered reduced graphene oxide (rGO)/MXene heterogeneous membranes by constructing these two kinds of two-dimensional membranes. The resulting rGO/MXene heterogeneous membranes achieved an exceptional separation performance, with the highest water permeance of up to 401.2 L m⁻² h⁻¹ bar⁻¹ while maintaining 99.7% rejection of dye molecules. The water permeance was 2.4 times greater than that of pristine rGO membranes and competitively surpasses most advanced nanofiltration (NF) membranes reported for dye wastewater treatment. More importantly, the rGO/MXene heterogeneous membranes exhibited outstanding mechanical robustness under demanding filtration environments. Notably, the membrane maintained structural integrity after 50 deformation cycles (stretching/bending) in hydrated conditions. Additionally, rGO/MXene heterogeneous membranes showed good antifouling performance. Overall, these findings indicate the strong potential of such new materials as durable and high-efficiency separation material membranes for industrial water-treatment applications.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2026
·
IF 6.6
Rongjing Jia,Shuling Chang,Ruirui Wang,Yanhong Xu,Rijie Wang,Lihong Zhang
The electrocatalytic CO 2 reduction reaction to CO (ECO 2 RR) is an effective way to achieve carbon resource utilization. It requires catalysts that can synergistically couple CO 2 activation with efficient CO desorption. This work engineers this synergy by constructing an interfacial Ag δ+ -O-Zn configuration on Zn(OH)F-derived supports via controlled Ag loading (0–5 wt%). The optimal catalyst (3A/Z, 3 wt% Ag) balances the formation of interfacial, oxidized Ag species (Ag δ+ ) with well-dispersed metallic Ag 0 nanoparticles. It achieves a CO Faradaic efficiency of 95.4% at −1.15 V vs. RHE and maintains 86% efficiency over 5 h at 6.38 mA cm −2 . In-situ ATR-SEIRAS spectra and kinetics reveal that Ag δ+ -related sites lower the barrier for *COOH formation, while adjacent Ag 0 domains facilitate *CO desorption. Excessive loading (5A/Z) promotes Ag aggregation and support decomposition, diminishing the critical Ag δ+ -O-Zn interface and performance. This study highlights interface coordination engineering as a key strategy for designing bifunctional ECO 2 RR catalysts.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2026
·
IF 18.1
Wu Xinya,Pang Chunlin,Li Qikai,Huang Yu-Ting,Wang Sijia,Cheng Chun,Li Wei,He Chuan,Deng Qiyu,Zhu Hengjia,Ni Meng,Chi Yun,Wang Liqiu,Feng Shien-Ping
Ionic thermocells offer a compelling route for converting low-grade heat into electricity, yet their real-world deployment is hindered by performance decay under fluctuating conditions and limited synergistic pathways. Herein, we introduce polyethyleneimine as a self-limiting sacrificial additive in a K 3 Fe(CN) 6 /K 4 Fe(CN) 6 thermocell. During initial operation, only a fraction of amine groups in polyethyleneimine engages in redox with Fe(CN) 6 3- /Fe(CN) 6 4- , while the remaining amine groups mediate thermally induced adsorption-desorption, selective condensation, and homogeneous catalysis. These cascaded effects boost the thermopower from 1.4 mV K -1 to 7.76 mV K -1 . Crucially, the self-limiting nature and temperature-dependent reactivity of polyethyleneimine-Fe(CN) 6 3- reaction not only generates solvation-perturbing species but also ensures long-term functional stability (>1000 hours). A proof-of-concept panel delivers over 5 V and 7.5 mW under a 50 K temperature difference, demonstrating system scalability. This work highlights the potential of sacrificial additive engineering to enable durable and high-performance thermocells for sustainable heat-to-electricity conversion.
✓ 已验证
产品关联
DOI
高影响因子
DYES AND PIGMENTS
·
2026
·
IF 3.9
Wensheng Zou,Wei Ma,Shufen Zhang
Conventional cotton dyeing relies on large amounts of inorganic salts and alkalis, resulting in high concentrations of salts and hydrolyzed dyes in the wastewater, and significant environmental stress. To address this, three new modifiers containing double epoxy groups and double quaternary ammonium salts were synthesized with varying alkyl chain lengths (BEQA-1, BEQA-2, and BEQA-3) for salt-free neutral dyeing. BEQA-3 achieved superior performance: at 10 g/L modifier dosage, C.I. Reactive Red 195 (3% o.w.f) exhibited 94.9% exhaustion and 91.8% fixation on modified fibers, requiring only one-third the dosage of monoepoxy monoquaternary ammonium salt. The chemical consumption of BEQA-3 modified fiber decreased by factors of 8.0 and 2.3 relative to traditional cotton fiber dyeing and monoepoxy monoquaternary ammonium salt modified cotton fiber dyeing processes, respectively. It is revealed by molecular dynamics simulations that dye diffusion correlates inversely with modifier chain length. Mechanistic studies combining Fukui index analysis and density functional theory calculations confirmed that newly introduced hydroxy groups during modification exhibited enhanced deprotonation propensity and lower reaction energy barriers with monochlorotriazine dyes than native cotton hydroxy. Our salt-free neutral dyeing process provided an innovative way for the textile industry to develop efficient and environmentally friendly dyeing aids for cellulosic fibers.
✓ 已验证
产品关联
DOI
高影响因子
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
·
2026
·
IF 7.9
Caihong Jiang,Jiaming Chen,Meng Yuan,Shuang Xue,Yingzi Lin,Yingtan Yu
Dissolved organic matter (DOM) is a ubiquitous photosensitizer in liquid waters and ice, exerting a complex influence on contaminant transformation by both generating and scavenging hydroxyl radicals (•OH). This study systematically investigated •OH photochemistry using carbamazepine (CBZ) as a reactive probe across varied DOM sources and environmental phases. DOM played a dual role in CBZ photodegradation in both liquid water and ice. Firstly, DOM can photochemically yield •OH and promote CBZ photodegradation. Secondly, DOM can effectively scavenge •OH and inhibit the •OH-mediated photodegradation of CBZ. DOM type controlled this balance: terrestrial Elliott Soil Humic Acid (ESHA) exhibited a higher •OH production capacity, with steady-state •OH concentrations ([•OH] ss ) ranging from (1.55 ± 0.02) × 10⁻¹⁷ M to (10.57 ± 0.48) × 10⁻¹⁷ M as concentration rose from 1.0 to 5.0 mg C/L. In contrast, aquatic Suwannee River Natural Organic Matter (SRNOM) and effluent organic matter (EfOM) exhibited stronger •OH quenching efficiency in both phases. At 1.0 mg C/L in liquid water, the •OH quenching efficiency reached 94.12% for SRNOM and 83.34% for EfOM. There were differences in the transformation pathways of CBZ as well as in the toxicity trends of its photoproducts between liquid water and ice.
✓ 已验证
产品关联
DOI
高影响因子