文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2041至2052个,产品总数347,389个

切换升序
LWT-FOOD SCIENCE AND TECHNOLOGY · 2026 · IF 7.1

Combining phospholipase C hydrolysis of soybean concentrated phospholipids with column chromatography to produce of high-purity phosphatidylinositol

Jingyi Xiao,Yiwei Liu,Shuaihao Guo,Weinong Zhang,Zongyuan Wu,Jiangtao Feng,Yanxia Cong,Xinghao Tu

Phosphatidylinositol (PI) is vital for studying metabolic diseases and cancer; however, its purification is challenging. An enzymatic-chromatographic approach for producing high-purity PI from concentrated soybean phospholipids was developed in this study. This method employs phospholipase C (PLC), which selectively hydrolyses phosphatidylcholine (PC) and phosphatidylethanolamine (PE) but leaves PI intact. This selective reaction serves as a critical pretreatment step for enriching PI content in mixtures. The optimal reaction conditions included a SCPs to water ratio of 1:1.57 (g/mL), temperature of 39.6 °C, PLC dosage of 22 mg/g, and reaction time of 3.3 h, complete hydrolysis of PE and PC was achieved. Subsequently, defatting and deglycosylation the hydrolysed phospholipids concentrated the PI from 152.90 to 513.30 mg/g. This step markedly facilitated the downstream PI purification process. Chloroform-methanol volume ratio (1.8:1) chromatography at a flow rate of 8 mL/min was used to purify the PI further, yielding a high-purity product with a purity of 91.86 g/hg and yield of 77.85 g/hg. High-purity PI is suitable for medical applications owing to its lipid properties. This efficient purification strategy paves the way for the development of new therapeutics.

CAS / MDL: 64-19-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Nature Communications · 2026 · IF 18.1

In-situ formatting benzisoxazole-linked covalent organic framework for enhanced photocatalytic hydrogen peroxide generation

Zhang Pu,Zeng Haihua,Zhang Qiang,Wang Peifang,Che Huinan,Tang Chunmei,Xu Jingjing,Long Jinlin,Liu Bin,Ao Yanhui

Azole-linked covalent organic frameworks have drawn a lot of attention in photocatalytic synthesis of hydrogen peroxide, yet remain challenged by complex and costly synthetic routes. Here, we present a light-induced structural transformation strategy to facilely construct azole-linked covalent organic frameworks. We find that benzisoxazole linkages can be in-situ formed from imine linkages under light irradiation. As expected, the evolved partially benzisoxazole-linked covalent organic framework achieves a high hydrogen peroxide yield rate of 1986.9 μmol·g −1 ·h −1 in pure water. Theoretical calculations and spectral characterizations reveal significantly enhanced charge carrier separation and transfer efficiency, due to the formation of donor-acceptor structure. Furthermore, the in-situ formed benzisoxazole unit acts as both electron acceptor and catalytic center, promoting the reduction of dioxygen to superoxide radical, which is then converted into hydrogen peroxide, ultimately enhancing the yield. This work demonstrates a pioneering strategy for constructing benzisoxazole-linked covalent organic frameworks with high performance on hydrogen peroxide photo-synthesis.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
FUEL · 2026 · IF 7.8

Combustion characteristics of High-Density metal alloy particles

Mengxia Sun,Jianzhong Liu,Xueqin Liao,Haiou Wang,Jianren Fan

High-density aluminum-based alloy fuels, known for their excellent energy performance and combustion characteristics, are emerging as potential components in metal propellants. This study investigates the ignition and combustion behaviors of pure aluminum and three high-density alloys (Al-Mo-La, Al-Zr, Al-Ti) under high pressure in complex atmospheres using a laser ignition system. Thermogravimetric-differential scanning calorimetry (TG-DSC) was employed to explore their thermal oxidation mechanisms. The results reveal significant differences in combustion behavior and oxidation pathways among the samples. TG-DSC analysis indicates that the total oxidative exothermic heat and mass gain of Al-Ti and Al-Zr alloys significantly exceed those of pure Al, whereas Al-Mo-La exhibits inferior oxidation parameters. Combustion images show that Al and Al-Mo-La particles aggregate into large molten droplets, while Al-Zr and Al-Ti particles demonstrate intense micro-explosion phenomena. Additionally, a distinct interface layer forms during the combustion of Al and Al-Mo-La alloys, whereas no such stratification is observed in Al-Ti alloys. Combustion in a 50% O 2 +50% CO 2 atmosphere is more effective than in a 50% O 2 +50% N 2 atmosphere. This work provides valuable insights into the application of these novel alloy fuels in propellants.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry A · 2026 · IF 9.2

Intercalated montmorillonite fabricating highly-conductive and overall-stable solid composite electrolyte for advanced lithium metal battery

Yan Yuan,Xinyi Dong,Yaxin Kong,Wenzhi Liang,Jiaxin Luo,Zeyu Li,Hai Lu

Solid-state lithium metal batteries are promising volunteers for next-generation energy storage. However, their widespread applications are greatly hindered by low ionic conductivity of solid electrolyte and unstable interface towards Li metal. Herein, a novel organic molecule’s pre-intercalation strategy is proposed for modifying layered-structure montmorillonite (MMT) as a functional filler of solid composite electrolyte (SCE). Research results reveal that polar dimethyl sulfoxide (DMSO) successfully inserts into MMT interlayers by hydrogen bonding interaction, which effectively expands the interlayer spacing without disrupting inherent structure of the MMT. The modified filler not only creates continuous and ordered channels to conduct Li+ rapidly, but also minimizes the detrimental effects of residual solvent by strong adsorption effect, thereby achieving overall enhancements of the SCE in ionic transport properties and electrochemical/thermal/mechanical stability. Consequently, excellent cycling capabilities with lessened polarization are illustrated in both Li|Li symmetrical cell and LiFePO4|Li full cell.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
FOOD HYDROCOLLOIDS · 2026 · IF 13.8

Performance evaluation of heated rice protein/konjac glucomannan mixtures as dysphagia diets

Xiaojuan Chen,Hongshan Liang,Wenfei Xiong,Mohamed Eid

Neutral polysaccharide konjac glucomannan (KGM), characterized by its exceptional high viscosity, was selected to enhance the stability of rice protein (RP) with poor water solubility. This enabled the preparation of a high-protein, fluid RP/KGM mixtures through thermal processing (100 °C, 30 min), offering a safe and convenient diets for elderly individuals with dysphagia. The results revealed that adding 0.5% KGM was sufficient to provide excellent stability for RP dispersions (5%, 10%, 15%, w/v). Shear rheology results revealed that, regardless of RP content, the yield stress and apparent viscosity at a shear rate of 50 1/s for heated RP/KGM mixtures significantly increased with rising KGM content (from 0.5% to 1.5%), corresponding to ranges of 0.12∼42.0 Pa and 0.49∼12.3 Pa s, respectively, as well as thixotropy, viscoelasticity, and cohesiveness. Similarly, the extensional viscosity (from 1 to 6 Pa s) of heated RP/KGM mixtures increased significantly with rising KGM content, while the contribution of RP was minor. However, lubricity assessments found that the high viscosity of KGM caused the friction coefficient of heat-treated mixtures to increase markedly with polysaccharide content in the elastic-hydrodynamic regime. According to the IDDSI framework, mixtures containing 0.5% and 1% KGM fall within level 2∼3 and level 3∼4, respectively. Samples containing 1.5% KGM may cause airway obstruction due to excessive viscosity, yield stress, and cohesiveness, and thus may not be suitable for elderly individuals with dysphagia. These findings lay the foundation for designing protein-rich, convenient-to-consume, easy-to-swallow liquid foods using RP/KGM mixtures.

CAS / MDL: 81-88-9
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Molecular Catalysis · 2026 · IF 4.3

Insight into the biomass-derived electrocatalysts with dual function on overall water splitting and its mechanism-inspired modification

Wangchuang Zhu,Ke Liu,Xinghua Zhang,Qi Zhang,Xiuzheng Zhuang,Longlong Ma

To achieve efficient overall water splitting, balanced reaction kinetics between electrodes is essential. Current research, however, predominantly focuses on single-electrode performance, overlooking inter-electrode synergy. This study develops a nanostructured bifunctional catalyst where NiFe alloy serves as the key synergistic active site. Through mechanism-guided modification, the catalyst achieves significantly improved HER/OER performance, with overpotentials decreasing from 304.8/310.2 mV to 146/298 mV at 10 mA/cm 2 . Systematic characterization (TEM/XRD/XPS) reveals the rate-determining steps and reaction pathway. The assembled electrolyzer requires only 1.58 V to reach 10 mA/cm 2 and demonstrates excellent stability over 11 h. This work provides new insights into the rational design and mechanistic analysis of bifunctional catalysts.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COMPOSITES COMMUNICATIONS · 2026 · IF 8.6

Polyaniline Functionalized Magnetic Fe3O4/MXene Composites with Tunable Negative Organic Magnetoresistance

Jiang Guo,Xiuyun Ma,Shaohua Xi,Yong Mao,Yan Zhang,Yukun Sun,Wenling Wu,Jianfeng Zhu

Polymer composites with room temperature magnetoresistance (MR) are attractive for emerging magnetic sensors and information-storage devices in the era of the Internet of Things. In this work, the magnetorsistive polyaniline (PANI) functionalized magnetic Ti 3 C 2 T x Composites were prepared by solvothermal and in-situ polymerization method. By decorating non-magnetic Ti 3 C 2 T x with magnetic Fe 3 O 4 particles and tuning the Fe 3 O 4 loading on Ti 3 C 2 T x , the room temperature magnetoresistance can be effectively controlled. The Ti 3 C 2 T x /PANI (T/P) composites exhibit positive MR of 4.65% at 2 T, while the Fe 3 O 4 –Ti 3 C 2 T x /PANI (FT/P) composites demonstrates negative MR of -11.13% at 2 T with 60 wt% Fe 3 O 4 loading in Fe 3 O 4 –Ti 3 C 2 T x . Structural and morphological characterizations (SEM, TEM, XRD, FT-IR and XPS) confirm the successful fabrication of FT/P composites. The positive MR in T/P is well described by the wave-function shrinkage model, and the negative MR in FT/P composites is quantitatively fitted by the forward interference model. The localization length ( a 0 ), hopping distance (R hop ) and density of states at the Fermi level (N(E F )) are evaluated. The localization length decreases with increasing magnetic field for all samples and is significantly larger in T/P than in FT/P composites. This work demonstrates a simple and effective strategy to achieve tunable negative MR at room temperature PANI composites for magnetic sensing and data-storage applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS · 2026 · IF 5.4

Carbon-coated CoV2O6·2 H2O as a high-capacity anode for lithium-ion batteries

Ali Tariq,Zeeshan Tariq,Hafiz Muhammad Naeem Ullah,Sajid Ur Rehman,Xiaoming Zhang,Jun Zheng,Yuhua Zuo

The cobalt-based vanadates are promising candidate as electrode material because of cobalt’s high lithium up-take, higher theoretical capacity and various valence states of vanadium, which supports multiple redox reactions during electrochemical performance. This study, for the first time, synthesized and explored the electrochemical behavior of the cuboidal CoV 2 O 6 ∙2 H 2 O and its glucose derived carbon composite for lithium batteries. The simple and one-step facile microwave assisted heating technique is used for the synthesis. The synthesized composite of CoV 2 O 6 ∙2 H 2 O with carbon exhibit stable cycling performance with higher reversible capacity of 909 mAh/g at 0.1 A/g current density because carbon enhanced the conductivity and charge transfer. While its pristine counterpart shows comparatively lower reversible capacity of 213.4 mAh/g for 100 cycles. The CoV 2 O 6 ∙2 H 2 O@C composite also displays good capacity value of 236.7 mA h/g for long cycling (3000 cycles) even at high current density of 3 A/g with capacity retention of 90.3%, whereas pristine electrode fails around 2100 cycles. Also, the rate capabilities of carbon composite are better than the pristine. The observed findings highlight the robust potential of CoV 2 O 6 ∙2 H 2 O@C electrode to be used in next-generation energy storage technologies.

CAS / MDL: 10026-22-9 50-99-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
GREEN CHEMISTRY · 2026 · IF 10.6

Efficient separation of uncondensed lignin and high-quality cellulose from bamboo using reactive deep eutectic solvents for versatile valorization

Ruojin Shen,Chao Wang,Keqin Zhang,Changyi Zhu,Lupeng Shao,Kai Zhang,Xianhai Zeng,Feng Xu,Guihua Yang,Jiachuan Chen

The complete valorization of lignocellulosic biomass is pivotal to realizing the economic viability and environmental sustainability of next-generation biorefineries. Herein, we developed a sustainable and highly selective fractionation strategy for bamboo using a glyoxylic acid-mediated deep eutectic solvent (DES) composed of tetrabutylammonium bromide and glyoxylic acid monohydrate (TBAB-GA). Treatment with the DES at 130 °C efficiently removed 79.62% of lignin, yielding carboxyl-enriched lignin while retaining 84.33% of cellulose in the solid residue. Notably, the incorporation of 30 wt% water allowed the process to be conducted at a reduced temperature (110 °C) while further enhancing the delignification efficiency from 60.76% to 85.94%. Critically, the extracted lignin exhibited an exceptionally high content of β-O-4 linkages (34.51/100Ar; 77.46% retention), indicating minimal structural condensation. This well-preserved β-O-4 content directly enabled efficient catalytic hydrogenolysis, affording aromatic monomers in a high yield of 25.45%. Leveraging the intact biopolymers, we further fabricated uniform cellulose nanofibers (CNFs) and lignin nanoparticles (LNPs), which were subsequently incorporated into alginate-based composite gel beads. These beads demonstrated an excellent protein adsorption capacity (1283 mg g−1) and pronounced selectivity toward positively charged proteins, highlighting their potential for sustainable bioseparation technologies. This work establishes a mild, efficient, and fully integrated DES-based platform that enables the concurrent production of high-purity cellulose and structurally intact lignin from raw biomass, thereby advancing the paradigm of holistic lignocellulose valorization in alignment with green chemistry principles.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
BIOSENSORS & BIOELECTRONICS · 2026 · IF 11.8

A portable NELIBS-based paper sensor for on-site trace element analysis in sewage and soil

Fengjing Cao,Shixiang Ma,Hongwu Tian,Yachao Liu,Zhangjin He,Jing Wu,Daming Dong

Ultrafast on-site detection of elements in polluted water and soil is crucial for farming and food safety, yet remains challenging due to complex and time-consuming pretreatment. Nanoparticle-enhanced laser-induced breakdown spectroscopy (NELIBS) enables rapid on-site detection of trace heavy metals in complex samples without pretreatment while amplifying signal. We report a paper-based sensor modified with gold nanorods embedded in metal-organic frameworks (AuNRs@MOFs) using LIBS for multiplexed trace element detection in sewage and soil. It exhibits excellent linear response and low detection limits for Cu and Cr in water (0.03 μg/L, 2.49 μg/L) and soil (0.145 mg/kg, 0.072 mg/kg), with accuracy comparable to ICP-MS in real samples. This sensor provides a powerful tool for environmental protection and food safety.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2026 · IF 9.1

Preparation of porous alumina‑carbon composite fibers via coaxial electro-blown spinning for methylene blue adsorption study

Yafang Li,Tao Tian,Zijie Zhang,Zhihao Li,Le Tian,Yinong Sun,Yixia Zhao,Jingge Ju

The porous alumina‑carbon composite fibers (PACF) were innovatively prepared through the implementation of an coaxial electro-blown spinning (EBS) method in conjunction with carbonization process. This study pioneers a strategy where a carbon precursor core is encapsulated by an alumina precursor shell, co-incorporating PTFE as a porogen. This design yields a continuous porous carbon network within the alumina fiber, serving as a skeleton to ensure mechanical integrity and inhibit brittleness, while component diffusion enables surface carbon exposure for rapid adsorption. The optimal PACF (prepared at an inner-outer flow rate of 1:2, 3 °C/min, 800 °C) possesses a hierarchical pore structure, a high specific surface area (349 m 2 /g), and exhibits exceptional methylene blue adsorption performance (99% removal in 2.5 min) with excellent reusability (maintained a high adsorption efficiency of 95.5% even after five adsorption–desorption cycles). The superior adsorption performance of PACF originates from its hierarchical pore architecture formed by porous carbon and alumina, where carbon-derived micropores supply abundant adsorption sites and alumina-derived mesopores serve as efficient diffusion channels. This multiscale pore synergy reduces mass-transfer resistance and promotes methylene blue diffusion and accumulation within the fibers, enabling rapid and efficient adsorption. The synergistic effect between porous alumina and carbon endows the PACF with superior comprehensive performance, highlighting its potential for practical wastewater treatment applications.

CAS / MDL: 7784-13-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Corrosion Communications · 2026 · IF 10.7

Liquid-infused slippery anti-corrosion surface: From laboratory to marine environment assessments

Jinbao Zhang,Xiaochen Xue,Binbin Zhang

As a promising alternative to address the instability of the air layer in superhydrophobic anti-corrosion materials, the corrosion resistance of bioinspired liquid-infused slippery surface (SS) has been demonstrated. However, evaluations have been largely confined to laboratory testing, which fails to accurately predict their performance in real-world service environments. In this paper, we constructed a liquid-infused SS by infusing perfluoropolyether (PFPE) into an epoxy resin/fluorinated TiO 2 (EP/F-TiO 2 ) superhydrophobic coating (SC). Analyses of surface wettability, morphology, roughness, and chemical composition confirmed the formation of a continuous PFPE liquid film, which successfully replaced the trapped air layer within the structural interstices of EP/F-TiO 2 SC. This resulted in a surface with slippery and low surface energy properties, effectively repelling liquids across a wide range of surface tensions from water (72.8 mN·m -1 ) to peanut oil (34.5 mN·m -1 ). Laboratory tests verified the excellent anti-fouling and anti-corrosion capabilities of the prepared EP/F-TiO 2 /PFPE SS, with its low-frequency impedance modulus and charge transfer resistance showing a six-order-of-magnitude increase over bare Q235 carbon steel. More importantly, we evaluated the real-world marine anti-corrosion performance of the EP/F-TiO 2 /PFPE SS by exposing samples to four distinct corrosion zones. The results revealed that the EP/F-TiO 2 /PFPE SS exhibited superior long-term anti-corrosion performance in the atmospheric and splash zones. However, in the tidal and submerged zones, the gradual depletion of PFPE under dynamic seawater conditions led to a decline in surface slippery property and eventual biofouling during long-term exposure. This study, integrating both laboratory experiments and field assessments in marine environments, underscores the significant challenges associated with transitioning liquid-infused slippery materials from laboratory to practical applications. In particular, the long-term retention of lubricant within surface structures remains a paramount concern requiring further investigation.

CAS / MDL: 83048-65-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。