文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2017至2028个,产品总数347,389个

切换升序
POLYMER · 2026 · IF 5.1

UV-curable bio-based castor oil-modified poly(l-lactide) with excellent adhesion and ductility

Dong Chen,Yu Zhou,Meiyin Wang,Mei Wu,Junjie Tan,Hongxiang Chen,Hongye Yan

To improve the inherent brittleness of poly( l -lactide) (PLLA) and obtain a kind of UV-curable bio-based PLLA with excellent adhesion and ductility, castor oil (CO) was used to modify PLLA by a novel and simple pathway. After a series of castor oil-poly( l -lactide) oligomers (COPLLA) were prepared via the ring-opening polymerization of l -lactide (LLA) with CO as the initiator, a kind of bio-based castor oil-modified PLLA with chemical cross-linked network and PLLA branched chain (CCPLLA) was obtained through UV-initiated thiol-ene reaction between COPLLA and pentaerythritol tetra(mercaptoacetate) (PETMA) as the crosslinker. CCPLLA was respectively measured by Fourier transform infrared (FTIR) spectroscopy and extraction, showing the good UV-curing effect. With increasing the molecular weight of PLLA branched chain, the glass transition temperature of CCPLLA rose, meanwhile CCPLLA gradually transformed from an amorphous state to having crystalline behavior, which determined by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). The mechanical and adhesive properties of CCPLLA first increased significantly and then slightly decreased with increasing the length of PLLA branched chain. Among them, CCPLLA-18 exhibited the best comprehensive performance such as tensile strength, ductility, adhesive property, water resistance, thermal stability and optical transmittance. Therefore, the UV-curable bio-based castor oil-modified PLLA has application potential in the field of adhesive, particularly for bonding of heat-sensitive substrates and those requiring high transparency.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Advanced Energy Materials · 2026 · IF 25.5

Electrochemically Driven Refrigeration Based on Dissolution–Crystallization Cycle of Redox-Active Salts

Yifan Zhang,Pei Liu,Yilin Zeng,Xuan Cai,Linfeng Wang,Huaiyu Ke,Xue Long,Hua Jiang,Wendong Yang,Zuoxuan Gan,Jiabao Sun,Jia Li,Jiangjiang Duan

Developing energy-efficient and environmentally sustainable refrigeration technologies is critically important for mitigating climate change. Here, we report an electrochemically driven dissolution–crystallization refrigeration cycle (EDCR), a liquid-state electrochemical cooling concept in which cooling is generated by the endothermic dissolution of electrochemically regenerated redox-active salts. Unlike conventional electrochemical refrigeration, where the cooling effect arises directly from endothermic redox reactions and is therefore partly offset by Joule heating, EDCR spatially separates electrochemical regeneration from dissolution-based cooling. The EDCR achieves a maximum temperature drop of 5.65 K and a maximum coefficient of performance of up to 15.51 under ideal condition without heat loss, corresponding to a relative Carnot efficiency of 29.8% at room temperature. This proof-of-concept study establishes EDCR as a promising hydrofluorocarbon-free refrigeration strategy and provides a new route for exploring liquid-state electrochemical cooling cycle.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF THE ENERGY INSTITUTE · 2026 · IF 6.5

Carbon precursor engineering in chemical looping co-gasification of microalgae-lignocellulosic biomass enabled by Ce-doped perovskite oxygen carriers

Zhanmin Zhu,Yu Chen,Shangqing Xi,Xiaojia Wang

Biomass chemical looping co-gasification (BCLCG) offers a promising route for converting renewable biomass into controllable gaseous carbon precursors, though precise regulation of carbon distribution remains challenging. Here, we propose a carbon precursor engineering strategy via co-gasification of pine sawdust (PS) and Chlorella (CH) using Ce-doped LaFeO 3 (LFO) perovskite oxygen carriers. Ce incorporation significantly enhances lattice oxygen mobility, oxygen vacancy concentration, and structural stability. Among the samples, La 0.7 Ce 0.3 FeO 3 (L 0.7 C 0.3 FO) exhibits optimal redox performance, maintaining a high specific surface area (4.13 m 2 /g) and stable mesoporous structure after reaction while suppressing sintering-induced pore collapse. A pronounced synergistic effect is observed during PS-CH co-gasification: hydrogen-rich volatiles and intrinsic alkali/alkaline earth metals from CH promote tar cracking and char conversion, facilitating carbon redistribution toward gaseous products. At the optimal blending ratio (PS/CH = 1:2), the carbon precursor formation (CPF = CO + CH 4  + C 2 -C 4 ) reaches 0.362 Nm 3 /kg with a total gas yield of 1.268 Nm 3 /kg, and carbon utilization efficiency (CUE) reaches 67.6%. Process optimization reveals that carbon precursor formation is governed by lattice oxygen supply, steam participation, and thermal conditions. The optimal conditions (900 °C, oxygen carrier-to-biomass ratio of 1.0, steam flow rate of 0.3 mL/min) enhance CUE. This work reinterprets BCLCG as a carbon precursor engineering platform rather than conventional syngas production. The integration of Ce-doped perovskite oxygen carriers with multi-source biomass enables precise carbon distribution regulation and provides a viable pathway for efficient biomass conversion into carbon-oriented gaseous products.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Advanced Materials Technologies · 2026 · IF 6

Acoustic Mixed Photothermal Actuators for Multimodal Amphibious Robots

Wenbo Ma,Peiyang Huang,Xiang Li,Xiaobin Zhan,Min Li,Shulan Jiang,Xin Tu

Fabricating high performance light-driven soft actuators remains challenging due to the viscosity limited dispersion of photothermal agents, which induces structural defects and attenuates the resulting photomechanical response. Herein, an acoustic vibration mixing (AVM) strategy is introduced to achieve an exceptionally homogeneous and optimized loading integration of polydopamine (PDA) and polypyrrole (PPy) within a polydimethylsiloxane (PDMS) matrix. This processing paradigm ensures uniform thermal distribution and robust photomechanical transduction, enabling a bilayered microrobot to execute versatile locomotion modes. Experimental results demonstrate that our actuator achieves a 100° deflection at ∼350 mW/cm 2, and the microrobot can execute terrestrial crawling (0.1 BL/s), high-speed rolling (7.5 BL/s), and Marangoni-driven aquatic gliding (0.41 BL/s). Significantly, the superior photothermal conversion efficiency empowers the robot to generate sufficient torque to overcome interfacial capillary pinning, thereby facilitating seamless bidirectional transitions between land and water. This work provides a practical fabrication paradigm for multifunctional soft robotic systems designed for complex, cross-domain environments.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Advanced Science · 2026 · IF 14.1

A Sustainable Bio-Based Epoxy Thermoset as a High-Performance Alternative to BPA-Based Resins

Jiyun Qi,Xinyi Hui,Xipeng Zhang,Jia-Long Wen,Tong-Qi Yuan

Epoxy resins are indispensable to structural composites, coatings, and adhesives. However, conventional bisphenol A (BPA)-based epoxy resins are limited by toxicity concerns, intrinsic brittleness, poor end-of-life recyclability, and a high carbon footprint. Here, a rigid–flexible bio-based network design is developed by coupling epoxidized soybean oil (ESO), lignin, and malic acid through maleic anhydride bridging, which simultaneously improves component compatibility and introduces dynamic ester linkages for pH-responsive degradation. The resulting thermoset achieved an unusual combination of strength, ductility, and environmental resilience, delivering 22.08 MPa shear strength as a structural adhesive and 31 4.57 MPa tensile strength in glass-fabric composites, together with an ≈250% increase in flexural strain relative to the BPA epoxy. It further maintains robust performance after exposure to chemically aggressive media and extreme temperatures ranging from −196 to 200°C. Life cycle assessment (LCA) and techno-economic analysis (TEA) confirmed its environmental friendliness and competitive cost‑effectiveness. This work demonstrates a sustainable design for high‑performance thermoset, offering a viable sustainable alternative for applications such as structural adhesives and wind‑turbine composites, thereby accelerating the transition toward a circular bio‑economy.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Advanced Materials Technologies · 2026 · IF 6

Laser Surface Micromachining-Based PVC Diffusion Layer for Multimodal Wearable Sports Sensors

Yangyi Huang,Le Jing,Haosong Zhong,Siyu Chen,Yexin Pan,Xupeng Lu,Mitch Guijun Li

Multimodal wearable sports sensors capable of simultaneously detecting both physical and biochemical signals represent a transformative approach to comprehensive physiological monitoring during exercise. However, most existing systems either focus solely on physical parameters or suffer from limited sensitivity and sensing range when targeting high-concentration biochemical markers. There remains a challenge for integrated platforms that can robustly monitor metabolic status in realistic sports scenarios. This work presents M-SportSense, an integrated wearable platform for real-time multimodal sweat analysis that combines lactate and pH sensing. The core innovation is a laser surface micromachined PVC diffusion layer that dramatically enhances lactate detection performance. By employing a 1064 nm laser to create a circular hole array on the honeycomb PVC surface, the detection range is expanded by 100 times while simultaneously increasing sensitivity by 127%. The M-SportSense integrates laser-induced graphene (LIG) electrodes functionalized with lactate oxidase for lactate sensing, polyaniline for pH sensing, and serpentine LIG for temperature monitoring. A three-layer microfluidic device with optimized inlet design ensures efficient sweat collection and rapid refreshing rates. On-body validation during 20-min indoor cycling demonstrates stable multimodal detection of sweat lactate and pH, validating the platform's potential for personalized exercise monitoring, fatigue assessment, and real-time training optimization.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CERAMICS INTERNATIONAL · 2026 · IF 6

Low-temperature densification mechanism and properties of h-BN@SiC/ZrO2 composite ceramics prepared by hot-pressing

Sen Liu,Shuaishuai Wu,Beibei Tang,Mao Chen,Yongqiang Chen,Hailong Wang,Rui Zhang,Bingbing Fan

High-density h-BN@SiC/ZrO 2 composites with different ZrO 2 contents were prepared by hot-pressing. The microstructure, flexural strength, thermal shock behavior, thermal expansion properties and corrosion resistance of the composites in molten steel were systematically investigated. The construction of the h-BN@SiC core-shell structure is conducive to the formation of a uniform and continuous network structure during the sintering process. This significantly improves the sintering performance of h-BN-based materials and enables the low-temperature preparation of high-density products. Moreover, the uniform distribution of SiC can effectively coordinate the thermal matching between h-BN and ZrO 2 , significantly improving the high-temperature performance of the material. During the corrosion process, the SiC network structure can effectively bind ZrO 2 and BN particles, effectively resist the erosion of high-temperature molten steel, and its erosion resistance increases with the increase of ZrO 2 content. Especially, when the ZrO 2 content reached 40%, the erosion depth of the sample was merely 160.61 μm after being immersed in static molten steel for 120 min. Moreover, the h-BN@SiC/ZrO 2 composite with 30 wt% ZrO 2 demonstrates superior comprehensive performance: It achieves a flexural strength of 159.63 MPa, retains 87.08% of its original strength after thermal shock testing, exhibits a low apparent porosity of 3.37%, and possesses an average coefficient of thermal expansion as low as 3.95 × 10 −6 /K −1 . The comprehensive properties of h-BN@SiC/ZrO 2 composites were obviously improved by SiC network structure.

CAS / MDL: 1314-23-4 50-99-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ADVANCED FUNCTIONAL MATERIALS · 2026 ·Vol. 36 ·期 60 ·e76942 · IF 19.9

Lanthanide-Coordinated Porous Polymer Organic Frameworks as Highly Luminescent Probes for Selectively Sensing of Alternaria Toxins

Dakai Guo,Dongxia Nie,Guoping Zhang,Jing Zhao,Zhihui Zhao,Zheng Han

Although the rational design of multifunctional lanthanide-based frameworks and exploration of their emission mechanisms have long been research hotspots in the field of material science, they remain challenging issues that are critical to the development of optical sensing tools. Herein, a novel terbium-functionalized polymer organic framework (BTH-PHEN-POF@Tb) was successfully fabricated with benzene-1,3,5-tricarbohydrazide (BTH) and 1,10-phenanthroline-2,9-dicarbaldehyde (PHEN) as the building blocks. The as-prepared POF featured abundant imine bonds and nitrogen atoms allowing efficient coordination with Tb 3+ ions, which could activate a unique target-triggered synergistic antenna effect for Tb 3+ and effectively reduce solvent-induced nonradiative quenching, leading to a distinct and adjustable fluorescence enhancement. Density functional theory (DFT) calculations and frontier molecular orbital analysis were adopted for the explanation of fluorescence enhancement mechanism. A reliable fluorescent probe was developed for dual targets sensing of typical mycotoxins, tenuazonic acid (TeA) and alternariol monomethyl ether (AME). This detection method exhibited a wide linear range, high sensitivity (limits of detection = 1.51 for TeA and 0.15 ng mL −1 for AME), and rapid response (<30 s) along with excellent probe stability. Our results created new possibilities for the fabrication and application of multifunctional lanthanide-based frameworks in analytical chemistry, particularly for the optical sensing of harmful substances.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHINESE JOURNAL OF CHEMICAL ENGINEERING · 2026 · IF 3.5

Piperazine axially coordinated cobalt polyphthalocyanine polymers for high-performance lithium-ion battery anodes

Jiajie Lu,Huan Wang,Ruize Yin,Wenjing Zhou,Juan Liu,Junhao Zhang,Fenfen Zheng,Weiwei Xiong

Bridging-ligand modulation regulates stacking in metal-coordinated polymers. • Partially 3D cobalt polyphthalocyanine polymers via green ultrasonics. • Interlayer Co-N bridges stabilize framework for long cycling. : Metal-modified covalent organic polymers with planar π-conjugated structures are prone to aggregation due to strong interlayer π-π interactions, forming densely packed architectures that hinder electrolyte penetration and limit the accessibility of redox-active sites, thereby compromising their electrochemical performance as lithium-ion battery anodes. To address this issue, a bridging-ligand-driven strategy is proposed to regulate the aggregation behavior of such polymers. A cobalt polyphthalocyanine polymer (Co-TCNB) was synthesized and subsequently modified via an ultrasonic-assisted approach by introducing piperazine (PIP) as a bridging ligand. The axial coordination between PIP and cobalt centers constructs interlayer Co-N coordination bridges, which effectively weaken π-π interactions and alleviate dense stacking, while providing efficient pathways for charge transport and improving structural stability during repeated cycling. As a result, the cobalt polyphthalocyanine polymer bridged with piperazine (Co-TCNB-PIP) exhibits a significantly increased specific surface area and enhanced electrochemical performance. It delivers a reversible capacity of 850 mA·h·g −1 after 100 cycles at 200 mA·g −1 and maintains 640 mA·h·g −1 at 1000 mA·g −1 over prolonged cycling, demonstrating excellent rate capability and cycling stability, outperforming the majority of reported polymer-based anodes for lithium-ion batteries. Download: Download high-res image (341KB) Download: Download full-size image

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Advanced Science · 2026 · IF 14.1

High-Performance Multi-Walled Carbon Nanotubes-Organic Passivated Si Solar Cells Enabled by Spatially Selective Harvesting of High-Quality Sponges

Yuke Ren,Qi Wang,Jiahe Chen,Jianan Zhang,Jianxin Guo,Dehua Yang,Bingbing Chen,Lu Zhang,Yiming Xu,Xuan Chang,Tiansheng Sun,Qing Gao,Anyuan Cao,Jianhui Chen

Carbon nanotubes/Si (CNTs/Si) solar cells have emerged as promising photovoltaic devices due to their high performance and relatively simple fabrication processes. Multi-walled CNTs (MWCNTs) in solar cells exhibit better cost-effectiveness owing to the broader processing tolerance of MWCNTs synthesis. However, their efficiency previously reached only 12.49%, which has often been attributed to the higher defect density and inferior quality of MWCNTs compared with single-walled CNTs. In this study, by selecting high-quality pristine MWCNTs synthesized via floating catalyst chemical vapor deposition, we achieved a champion efficiency of 22.74% for MWCNTs:Nafion/Si solar cells. This breakthrough stems from the finding that while both the inner and outer parts of MWCNTs sponge can be uniformly dispersed when mixed with Nafion, the inner MWCNTs ink exhibits better stability than the outer MWCNTs ink due to amorphous carbon and copper impurities in the outer MWCNTs. The synergy between Nafion and the inner MWCNTs results in a high-work-function MWCNTs:Nafion film and a defect-passivated Si surface, leading to favorable band alignment, excellent carrier-selective transport properties, and consequently high device performance. This work challenges the conventional view that the higher defect density in MWCNTs inherently limits device performance and provides new insights for developing low-cost, high-efficiency carbon-based/Si solar cells.

CAS / MDL: 95-50-1
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Materials Today Bio · 2026 · IF 11

A tumor microenvironment-responsive calcium overload nanoplatform inducing PANoptosis for enhanced cancer immunotherapy

Aiyang Tong,Yang Zhou,Yang Ding,Yuelin Zhao,Changna Han,Linlin Wei,Jian Zhao

PANoptosis, a newly characterized form of inflammatory programmed cell death that integrates multiple cell death modalities, offers distinct advantages in both potent tumor cell killing and activation of antitumor immunity. However, strategies that can effectively induce PANoptosis in tumor cells remain scarce. Herein, we constructed a tumor microenvironment-responsive nanoplatform (HA-MnO 2 -FTY720@CaO 2 , HMFC) comprising a CaO 2 core and a MnO 2 shell, loaded with fingolimod (FTY720) and surface-functionalized with hyaluronic acid (HA) for CD44-mediated targeting. Under the mildly acidic and glutathione (GSH)-rich conditions of the tumor microenvironment (TME), the MnO 2 shell degrades, liberating FTY720 and exposing the CaO 2 core. The CaO 2 subsequently decomposes to release Ca 2+ and H 2 O 2. FTY720 inhibits Transient Receptor Potential Melastatin 7 (TRPM7) channels, disrupting Ca 2+ /Mg 2+ homeostasis and thereby provoking severe calcium overload. Simultaneously, MnO 2 depletes GSH and, together with CaO 2 -derived H 2 O 2 , promotes a Fenton-like reaction that generates abundant reactive oxygen species (ROS), thereby disrupting intracellular redox homeostasis. In addition, Mn 2+ released from MnO 2 degradation activates the cGAS–STING pathway, further contributing to DC maturation and antitumor immunity. This orchestrated immune response markedly suppresses tumor growth and when combined with anti-PD-L1 therapy, induces a pronounced abscopal effect. Together, our results indicate that calcium overload, FTY720-mediated TRPM7 inhibition, and MnO 2 -induced redox imbalance can drive PANoptosis, offering a new concept for enhancing cancer immunotherapy.

CAS / MDL: 23491-52-3 7773-01-5
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2026 · IF 9.6

Bio-derived lignin nanospheres as active interfacial regulators in defect-rich W18O49 electrochromic nanocomposites

Jiaqi Tan,Bole Ma,Yanlin Qin,Xueqing Qiu,Liheng Chen

Bio-derived lignin nanospheres act as active interfacial regulators in W 18 O 49 . • Spectroscopy supports electronic and oxygen-vacancy-related defect modulation. • Physical-mixing controls support the importance of in situ interface formation. • W 18 O 49 /LNS shows 76.1 ± 0.8% modulation, 7 ± 1 s bleaching, and improved retention. Designing robust organic-inorganic interfaces is essential for resolving the kinetics-stability trade-off in electrochromic (EC) smart-window materials. Here, bio-derived lignin nanospheres (LNS) are used as active interfacial regulators for defect-rich W 18 O 49 nanowires. Coordination-associated interactions between LNS and W 18 O 49 are accompanied by changes in the local electronic environment and oxygen-vacancy-related defect states. The optimized W 18 O 49 /LNS film delivers an optical modulation of 76.1 ± 0.8% at 654 nm, a coloration efficiency of 31.7 ± 1.1 cm 2 C −1 , and a bleaching time of 7 ± 1 s, together with improved cycling retention. Semi-quantitative W L 3 -edge X-ray absorption analysis indicates a decrease in the estimated average W oxidation state from 3.29 to 2.89. Operando FT-IR spectroscopy and DFT calculations reveal bias-induced changes in the interfacial redox and solvation environment, while ESR and electrochemical kinetic analyses support defect modulation and an increased surface-controlled contribution. These findings establish bio-derived interfacial regulation as a promising strategy for defect-rich functional oxide nanocomposites. Download: Download high-res image (165KB) Download: Download full-size image

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。