Nature Communications
·
2026
·
IF 18.1
Zhang Xinjing,Feng Qiuxia,Zhang Liming,Cao Zhongwei,Li Hongbo,Zhu Xuefeng,Yang Weishen
Membrane materials and fabrication methods often need to be co-developed to meet the specific permeance and selectivity requirements of different gas separation application, which limits the adaptability of membrane technology. Here we propose a post-regulation strategy—adjusting the pore structures of a standard “primitive” membrane to meet various separation needs—that greatly simplifies membrane preparation and accelerates technological advancement. Graphene quantum dots (GQDs) are introduced as innovative building blocks: a continuous GQD membrane is constructed by tightly stacking GQDs, and then its pore structure is tuned via heat treatment and in-situ cross-linking with small amine molecules. Combining adjustable angstrom-scale pores with preferential CO 2 adsorption, the resulting GQD membranes exhibit widely tunable CO 2 /N 2 and CO 2 /CH 4 separation performances. The CO 2 permeance and separation factors surpass most reported membranes and can be tuned to exceed industrial targets for CO 2 capture. By varying the heat treatment temperature, the separation scope of the membrane is further extended to challenging gas pairs such as C 3 H 6 /C 3 H 8 , demonstrating the high potential of this customizable post-regulation pore structure strategy.
✓ 已验证
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Xuejian Shi,Chunyu Zhao,Yanxiang Liu,Peiyan Sun,Jingyu Zhang,Teng Ma,Xiaofeng Wang,Yizhan Wang,Yingjin Wei
Carbon paper (CP) is introduced as the anode current collector of high energy lithium batteries using Li-rich layered oxide (LRO) cathode. It is uncovered that CP enables a reversible hybrid lithium storage behavior involving concurrent Li + intercalation and metallic Li deposition, effectively enhancing the cycling stability of lithium batteries. After the initial lithiation, the lithiated CP substrate promotes (110)-oriented Li deposition and guides three-dimensional progressive nucleation. Furthermore, the rich defects in CP enhances BF 4 − adsorption and decomposition, leading to a robust B, F-rich inorganic solid-electrolyte interphase film. These synergistic effects significantly improve lithium plating reversibility, induce a non-dendrite Li morphology, and stabilize the interface. When paired with a LRO cathode with practical areal capacity of 4 mAh cm −2 , the CP||LRO full-cell achieves over 51% capacity retention for 400 cycles, markedly outperforming the Cu-based cell. Even at −20 °C, the CP||LRO cell can still maintain a capacity retention of 64.5% after 80 cycles.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
·
2026
·
IF 16.8
Yang Luo,Zixuan Wang,Zhongying Zhao,Mingtao Zhu
Conductive hydrogel combining injectability, anti-freezing, adhesiveness, and ultra-stretchability is a promising candidate for flexible wearable electronic sensors. The key challenge lies in achieving a synergistic balance of multiple physical interactions through a simple strategy. Herein, we report a fully physically crosslinked conductive hydrogel composed of poly (acrylic acid) (PAA), dimethyl sulfoxide (DMSO), and Ni 2+ fabricated via a one-pot approach without chemical crosslinkers. Dynamic crosslinking arising from hydrogen-bonding networks and Ni 2+ -carboxylate coordination endows the hydrogel with robust mechanical properties (725 kPa tensile strength, 33,000 % elongation at break), efficient self-healing capability (∼90 % recovery), and excellent thermal stability down to −40 °C. The polar DMSO-rich environment and dynamic metal–ligand interactions synergistically enhance ionic conductivity and sensing sensitivity. Furthermore, the hydrogel exhibits high transparency, pH responsiveness, and interfacial adhesion, providing a multifunctional platform for high-performance flexible sensors.
✓ 已验证
产品关联
DOI
高影响因子
Environmental Science-Nano
·
2026
·
IF 5.6
Fengjiao He,Linpin Luo,Si Li,Xin Liu,Heng Wang,Nannan Qiu,Wentao Zhang,Yongning Wu,Yizhong Shen
Given the serious harm that microcystins (MCs) cause to public health and ecosystems (e.g., freshwater systems), there is a great need for an onsite MCs environmental assay that is cost-effective, easy-to-use, reliable and precise. Regarding this point, we here proposed a molecular imprinting-based selectively regulated laccase-like copper-doped carbon dot nanozyme (MIP@Cu-CD) to engineer a smartphone-assisted portable device, as a proof of concept, yielding the onsite visual colorimetric/fluorescence imaging-driven precise and reliable detection of MC-LR (a representative MCs) in real environmental waters. The detection mechanism was derived from the combination of MC-LR with its recognizable molecularly imprinted cavity, blocking the laccase-like activity-triggered MIP@Cu-CD to oxidize 2,4-dichlorophenol (2,4-DP) into a red quinoneimine product in the presence of 4-aminophenol (4-AP). At this moment, a decrease in colorimetric absorbance at 510 nm and a recovery of intrinsic blue fluorescence at 420 nm were observed in the MIP@Cu-CD + 2,4-DP + 4-AP system, with an increase in MC-LR concentration. On this basis, the system of MIP@Cu-CD + 2,4-DP + 4-AP was integrated with a home-made smartphone-assisted portable device to perform the onsite visual colorimetric/fluorescence images-based RGB detection of MC-LR in tap water, urban sewage, and lake water, with the detection limits of 0.227 μg/L and 0.101 μg/L in colorimetric and fluorescence ways, respectively. Moreover, the reliability was also confirmed by the liquid chromatography-mass spectrometry (LC-MS) method. This work provides a feasible approach to utilize molecular imprinting-based laccase-like nanozyme strategy to integrate portable devices for realizing the on-demand onsite detection of MCs in environmental waters.
✓ 已验证
产品关联
DOI
高影响因子
Molecular Catalysis
·
2026
·
IF 4.3
Kai-Xiong Dai,Kuan Wang,Yu-Rui Chao,Yue Yang,Xin-Peng Li,Zhen-Hong He,Weitao Wang,Huan Wang,Zhao-Tie Liu
The photothermal selective oxidation of cyclohexane to produce KA oil (cyclohexanone and cyclohexanol) under solvent-free conditions holds significant importance. However, the one-step photothermal oxidation of cyclohexane to produce downstream high-value products adipic acid (AA) remains a challenge at present. Hereby, a highly efficient Z-scheme CeCoO 3 /WO 3-x heterojunction photothermal catalyst was designed and constructed based on the interface engineering. Through photothermal synergistic effects, CeCoO 3 /WO 3-x achieves the efficient and highly selective oxidation of cyclohexane under solvent-free conditions and visible-light irradiation. Notably, the cyclohexane conversion reached 13.7 % with an overall selectivity of 97.6 % (where liquid KA oil selectivity was 65.2 % and solid AA selectivity was 32.4 %). The enhanced catalytic performance stems from the Z-scheme heterojunction structure, which effectively promotes photogenerated charge separation and transport, suppresses charge recombination, broadens the light response range, and exhibits a large specific surface area with porous structure. This study provides novel insights for designing highly efficient photothermal catalytic systems for the selective oxidation of low-carbon alkanes.
✓ 已验证
产品关联
DOI
高影响因子
Nanoscale
·
2026
·
IF 5.2
Wajid Hussain,Lei Yang,Ziyang Zhou,Peijie Ma,Hu Hanwen,Kun Zheng
Interface engineering can effectively reduce thermal conductivity in thermoelectric materials, resulting in enhanced thermoelectric performance. However, achieving synergistically optimized thermal and electrical transport properties remains challenging. In this study, MoSe2 was decorated into Ag2Se by a two-step solvothermal/hydrothermal process combined with spark plasma sintering. Spark plasma sintering enables interfacial ion exchange, resulting in reduced carrier concentration and increased Seebeck coefficient. Meanwhile the decorated MoSe2 at the grain boundaries strongly scatters phonons, along with the reduced electrical conductivity, resulting in significantly reduced thermal conductivity. Consequently, the Ag2Se/4mol% MoSe2 composite achieves a notable maximum figure of merit of 1.07 at 390 K and a theoretical maximum conversion efficiency of 2% at a temperature difference of 45 K, indicating that MoSe2 doping substantially improves the thermoelectric characteristics of n-type Ag2Se. This nanostructured interface design approach may be useful for improving the performance of various thermoelectric materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Jian Ao,Lingjun Bu,Kunting Xie,Yangtao Wu,Jiaxin Xiao,Shiqing Zhou
Aggregation of long-chain quaternary ammonium compounds (LC-QACs) into aggregates (e.g., micelles) during material modification often limits their grafting efficiency in porous adsorbents like powdered activated carbon (PAC), thereby constraining performance in anionic pollutant removal. Herein, we report a supramolecular strategy that employs β-cyclodextrin (β-CD) to suppress CTAB aggregation, enabling monomeric diffusion and enhanced CTAB loading within PAC micropores. The resulting β-CD/CTAB–PAC composite achieves a high perchlorate (ClO 4 − ) adsorption capacity of 211 mg g −1 , significantly surpassing the conventional CTAB-modified PAC (87 mg g −1 ), along with remarkable selectivity (distribution coefficient > 10× higher than competing anions), stability (<8% leaching in 10-day immersion), and regenerability (>91% capacity retention over 6 cycles). Fixed-bed column tests validated its practical efficacy, treating >5400 bed volumes of contaminated water (500 μg L −1 ) to below the drinking standard of 70 μg L −1 . Furthermore, density functional theory calculations attribute the high selectivity to the low hydration energy of ClO 4 − . Its sparse hydration shell results in a lower energy penalty for desolvation, enabling a more direct and stronger electrostatic interaction with the quaternary ammonium sites compared to the heavily hydrated competing anions. Overall, this aggregation-suppression approach provides a generalizable route for optimizing LC-QAC-based functionalization of porous materials.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2026
·
IF 18.1
Dai Weideren,Li Jinhua,Gou Yanzhuo,Zhang Jiaqi,Pan Zexun,Li Xianglong,Hu Haojun,Wang Shulin,Mei Tao,Wang Xianbao,Chen Chao,Tai Qidong,You Jingbi
The intrinsic phase instability of CsPbI 3 perovskites necessitates stringent fabrication conditions, significantly hindering the practical deployment. In the DMA-mediated CsPbI 3 nucleation system, the Cs + /DMA + ion exchange critically governs the resulting film quality. Here, we employ a moisture-responsive crystallization strategy utilizing propyltriethoxysilane (PTES) to deposite CsPbI 3 under ambient air with high humidity (55%). We demonstrate that the siloxane groups can capture DMA + in the intermediate DMAPbI 3 , facilitating DMA + extraction and Cs + incorporation, thereby accelerating crystallization kinetics. This approach enables CsPbI 3 PSCs to achieve a power conversion efficiency (PCE) of 21.00% with an impressive fill factor (FF) of 86.1% while processing perovskite under relative humidity (RH) of 55%. Higher PCEs of 21.85% and 22.60% (certified 22.02%) were achieved for devices fabricated at a lower RH of 25% and for films spin-coated under an N 2 atmosphere followed by annealing in ambient air, respectively. Furthermore, PTES-treated devices exhibit excellent operational stability under ambient conditions.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2026
·
IF 10.6
Chongshu Li,Changlei Wang,Qiying Lu,Jie Zhang,Yan Long,Jinshao Ye
Biodegradation is critical for eliminating triclocarban (TCC) from polluted environments. However, few pure cultures capable of TCC degradation have been isolated, and the cytotoxicity and detoxification mechanisms involved remain poorly understood during degradation process. Conventional screening methods based on enrichment cultures are inefficient. This study explored the feasibility of high-throughput screening strategies of functional bacteria that could potentially degrade TCC using existing functional enzyme information, bioinformatics databases, microbial collections, and bioinformatics tools and systematically investigated TCC-induced cytotoxicity and detoxification responses. From over 5000 candidate strains, eight representative isolates were selected, among which Diaphorobacter polyhydroxybutyrativorans (DP) degraded 26.0 ± 0.70% of 1 mg/L TCC within 48 h, along with its hydrolysates 3,4-dichloroaniline (3,4-DCA) and 4-chloroaniline (4-CA). Under TCC stress, DP maintained membrane integrity (TCC: 7.42% ± 1.36% vs Control: 4.75% ± 0.28%) and viability (TCC: 94.28% ± 0.53 vs Control: 95.15% ± 0.97%), despite elevated reactive oxygen species (ROS) levels. TCC exposure enhanced propionate metabolism, TCA cycle, and electron transport chain activity, redirecting energy allocation from biosynthesis to stress response and survival. Multiple detoxification mechanisms were employed, including lipopolysaccharide (LPS) modification, membrane permeability, efflux pumps and enzymatic catalysis. The concentrations of key energy metabolites, including fructose-1,6-bisphosphate, acetyl-CoA, and α-ketoglutarate, were reduced under TCC-induced stress. DP supplemented succinate and pyruvate through propionate metabolism via the methylcitrate cycle. This study provides a new perspective for screening emerging organic pollutant-degrading bacteria and new insights into regulation of metabolic network under stress of TCC.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FOOD RESEARCH INTERNATIONAL
·
2026
·
IF 8.8
Zhaohui Huang,Caiyue Ren,Wenhui Liu,Ziyuan Zhang,Mengning Zhao,Qian Liu,Baohua Kong,Fangda Sun
This study investigated the noncovalent interactions between rice protein and xanthan gum (RP-XG) and their effects on the stability of high internal phase emulsions (HIPEs). The infrared spectrum and fluorescence spectroscopy revealed that RP-XG was formed by hydrogen bonding, hydrophobic, and electrostatic interactions. The zeta potential absolute value and solubility of RP-XG increased significantly with rising XG concentration. At an XG concentration of 0.4%, the RP-XG complex exhibited optimal emulsifying performance, with EAI of 23.21 m 2 /g and ESI of 102.29%, the three-phase contact angle approached 90°, with biphasic wettability. Therefore, RP-0.4%XG was selected as the emulsifier for HIPE stabilization in subsequent experiments. The droplet size and rheological behavior of the HIPEs were closely related to emulsifier concentration and oil phase volume fraction. Specifically, the emulsion stabilized with 35 mg/mL RP-XG displayed the smallest droplet size and a dense network structure. Rheological analysis demonstrated that the HIPEs behaved as shear-thinning viscoelastic solids, showing the highest viscoelasticity at an emulsifier concentration of 35 mg/mL and an oil volume fraction of 77%. These findings provided a new strategy for the application of protein-polysaccharide complexes in food-grade HIPEs.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2026
·
IF 10.6
Hong-Jia Huang,Dan Huang,Jiang-Bing Qiu,Si-Ying Li,Qing Han,Cai-Qin Cheng,Hao-Yun Zhang,Zong-Di Wang,Yi-Tong Huang,Li-Gong Zou,Ce-Hui Mo,Hong-Ye Li,Wei-Dong Yang,Nai-Xian Feng,Da-Wei Li
Di(2-ethylhexyl) phthalate (DEHP), a widely used plasticizer, is frequently detected in marine environments, raising significant ecological concerns. Biodegradation of DEHP through marine microalgae represents an eco-friendly strategy for effective pollution abatement in marine environments. This study examined the physiological and molecular responses of the dinoflagellate Alexandrium pacificum under DEHP stress and evaluated its ability to biodegrade DEHP. Following DEHP exposure, A. pacificum exhibited a high capacity for DEHP biodegradation, achieving complete removal (below the detection limit) at environmentally relevant concentrations (≤ 200 μg/L) within 72 h, without detectable adverse effects on growth or photosynthesis. The degradation intermediates of DEHP involved β-oxidation, hydrolysis, de-esterification, and aromatic ring cleavage. Notably, DEHP exposure markedly suppressed paralytic shellfish toxin (PST) biosynthesis in A. pacificum , with concentrations of C1, C2, and GTX5 decreasing by 98.7%, 99.6%, and 98.2%, respectively. Transcriptomic analysis indicated that genes involved in DEHP degradation, such as fadB , hppD , xylG , and lysA , were upregulated, whereas PST biosynthesis genes ( SxtD , SxtL , SxtU ) were downregulated, suggesting that A. pacificum actively metabolizes DEHP while concurrently suppressing toxin production. Overall, this study provides comprehensive molecular insights for DEHP biodegradation by marine microalgae and highlights their capacity for effective PAE removal, contributing to ecological health and global seafood safety.
✓ 已验证
产品关联
DOI
高影响因子
TOXICOLOGY AND APPLIED PHARMACOLOGY
·
2026
·
IF 3.6
Chaocheng Wang,Haiqun Yang,Zhiyu Wang,Junzhao Liu,Yu Du
Neurological damage induced by diquat (DQ) poisoning has garnered significant attention from researchers in recent years. This study represents the first systematic investigation into the molecular mechanisms underlying acute DQ-induced brain injury by integrating quantitative proteomics with lysine succinylation proteomics in male C57BL/6 J SPF mice exposed to 200 mg/kg DQ dibromide via a single oral gavage. The study revealed that DQ poisoning significantly downregulated lysine succinylation levels in mouse brain tissue, thereby inhibiting key mitochondrial energy metabolism pathways and disrupting glycine-serine-threonine metabolism and the one‑carbon folate pool pathway. These alterations led to energy metabolism disorders, exacerbated oxidative stress, and enhanced neuroinflammation, ultimately triggering neuronal apoptosis and neurological dysfunction. This study reveals the central regulatory role of abnormal lysine succinylation in DQ neurotoxicity, providing a novel potential target for clinical intervention.
✓ 已验证
产品关联
DOI
高影响因子