文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,550+ SCI 论文 与阿拉丁产品引用相关
2,304,480.59 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第5305至5316个,产品总数347,550个

切换升序
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY · 2026 · IF 4.7

Construction and performance regulation of TiO2/Bi2O3 photocatalyst with Z-scheme heterojunction

Xiaojun Wen,Lei Liao,Yi He,Yingrong Jin,Ping Ren,Liang He,Changjie Jiang,Wei Yuan

Composite photocatalysts with Z -scheme and S-scheme heterojunctions show promising application potential, yet their synthesis remains challenging due to immature construction techniques. In this study, commercial TiO 2 and calcined Bi 2 O 3 were used as raw materials. By regulating the oxygen vacancy concentration on the surfaces of TiO 2 and Bi 2 O 3 nanoparticles, and thereby modulating the surface energy levels of the TiO 2 and Bi 2 O 3 particles, a TiO 2 /Bi 2 O 3 composite photocatalyst with a Z -scheme heterojunction was constructed via a hydrothermal method. The results indicate that the metallic bismuth formed during hydrothermal treatment bridges Bi 2 O 3 and TiO 2 . At a Bi 2 O 3 -to-TiO 2 mass ratio of 9:100 (sample TB9), the composite catalyst achieves 99.5% degradation of methylene blue and retains excellent stability over five cycles. This work proposes a strategy for constructing heterojunction photocatalysts by modulating surface energy levels, offering a novel approach for developing efficient photocatalytic materials.

CAS / MDL: 13463-67-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY · 2026 · IF 4.6

pH- and nitroreductase-responsive SERS acupuncture needles enabling ratiometric detection in both solution and tissue environments

Qingmei Zhong,Xiaomei Rong,Jiayi Liu,Huixiang Zong,Chuan Yan

The detection of pH and nitroreductase (NTR) in tissues plays a crucial role in assessing microenvironmental acid-base balance and diagnosing tumor hypoxia. However, most methods currently used for detecting substances in tissue samples require sample grinding for extraction, which compromises tissue integrity. Traditional Chinese medicine acupuncture needles offer a potential approach as they can be directly inserted into tissues, eliminating the need for destructive pretreatment procedures. In this work, we developed a novel acupuncture needles @ gold nanoparticles @ 5-mercapto-2-nitrobenzoic acid (ANs@Au NPs@MNBA) probe based on surface-enhanced Raman spectroscopy (SERS) technology, enabling simultaneous ratiometric detection of pH and NTR in both solution and intact tissue samples. The probe demonstrated excellent linear responses within pH ranges from 4.75 to 7.25 and NTR concentrations from 0 to 20.0 μg/mL. This innovative approach provides valuable insights into how tissue acid-base balance and NTR levels influence physiological functions and disease progression.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Light-Science & Applications · 2026 ·Vol. 15 ·期 1 ·90 · IF 23.4

Spin-canted Mn–Mn coupling in symmetry-broken metal chloride dimer with dual-responsive luminescence and sensing

Zhou Guojun,Wang Pei,Ren Qiqiong,Zhang Nan,Lv Jin,Mao Yilin,Qiao Jianwei,Zhang Xian-Ming

Magneto-optical coupling provides a powerful alternative to crystal field engineering for modulating Mn 2+ luminescence. However, precise control over Mn–Mn coupling is hindered by the complex spin-electron super-exchange interactions. Herein, we report a symmetry-broken Mn(II) chloride dimer, (C 10 H 20 O 5 Mn)(CH 3 CN)MnCl 4 , synthesized through a crown-ether-assisted supramolecular strategy. The dimer features a 7-coordinated pentagonal bipyramid and a 4-coordinated tetrahedron linked by a distorted Mn–Cl–Mn bridge (129°), which promotes rare spin-canted Mn–Mn coupling and creates a novel Mn–Mn luminescent center. This center exhibits a red emission at 638 nm with an unusually short lifetime of 0.42 ms, which is attributed to the relaxation of spin-forbidden d – d transitions. Notably, the emission undergoes a 30 nm blue-shift upon heating (5–305 K) due to the thermal suppression of spin-canting, and a 40 nm blue-shift under applied pressure (0–20 MPa) resulting from reduced orbital overlap. This dual-responsive luminescence originates from spin-canted weak ferromagnetism, which induces a rearrangement of energy-levels by separating antibonding orbitals. Using this effect, we have demonstrated an optical manometer for real-time underwater depth sensing. These findings highlight spin-canted Mn(II) dimers as a promising platform for stimuli-responsive luminescence and reveal a new mechanism for d–d transition modulation.

CAS / MDL: 33100-27-5 7773-01-5
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
CERAMICS INTERNATIONAL · 2026 · IF 5.6

Enhancing the performance of PMN-PT transparent piezoelectric ceramics by multi-rare earth doping based on the high-entropy strategy

Miao Yuan,Dashi Fu,Yaqi Wang,Chengwu Li,Guohui Zhu,Dingding Xu,Weiquan Shao,Yanqiang Li,Wanneng Ye,Yongcheng Zhang

Transparent piezoelectric ceramics, due to their ability to possess both piezoelectricity and light transmittance, have extensive applications in devices such as transparent sensors and transparent transducers. Generally, constructing ferroelectric domains with strong ferroelectricity and long-range order can yield a large piezoelectric coefficient. However, ferroelectric domain structures cause light scattering at the domain walls, thereby reducing the material's optical transmittance. Consequently, achieving both high optical transparency and a large piezoelectric performance simultaneously in piezoelectric ceramics presents a significant challenge. To address this challenge, La, Pr, Nd, Sm, Eu co-doped (1- x ) Pb(Mg 1/3 Nb 2/3 )O 3 - x PbTiO 3 (PMN-PT) transparent piezoelectric ceramics were prepared in this study based on a high-entropy strategy. Benefiting from the cocktail effect and lattice distortion effect of the high-entropy strategy, the largest piezoelectric performance d 33 of 1476 pC/N, along with a 60% linear transmittance and the highest linear transmittance up to 67% at 900 nm, along with high piezoelectric performance of 1334 pC/N were achieved. The influence of phase structure and ferroelectric domain structure on its optical, piezoelectric, dielectric, and ferroelectric properties was studied. The high-entropy transparent piezoelectric ceramics show enormous application potential in multifunctional photo-acoustic-electric coupling devices.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Energy Storage · 2026 · IF 9.8

Enhancing lithium-ion battery performance with silicon anodes using single-walled carbon nanotubes: Inspiration from reinforced concrete structures

Lijuan Qian,Leihao Sun,Zheng Xing,Guoteng Zhang,Hongfu Jiang,Zhicheng Ju

Drawing inspiration from the biomimetic design principles of reinforced concrete structures, we propose a composite electrode architecture in which single-walled carbon nanotubes (SWCNTs) act as “nano-reinforcements” and silicon particles serve as the “active concrete.” This design helps mitigate the challenge of conductive network fracture caused by the over 300% volume expansion of silicon anodes. By optimizing the low percolation threshold of the SWCNTs' three-dimensional conductive network and utilizing their high aspect ratio and ballistic transport properties, we create lithium-ion conduction channels between silicon particles that maintain mechanical adaptability. Experimental results show that, after 50 cycles at a high current of 1.8 A g −1 , the electrode retains 83.25% of its initial capacity, with minimal crack formation, significantly outperforming traditional multi-walled carbon nanotubes (MWCNTs). COMSOL simulations further confirm that the SWCNT framework alleviates localized stress and, in combination with Si C bonds at the interface, suppresses solid electrolyte interphase (SEI) rupture and lithiation phase changes, leading to a synergistic enhancement of both lithium-ion diffusion and charge transport efficiency. This biomimetic strategy overcomes the ‘trade-off effect’ between the mechanical and electrochemical properties of silicon-based electrodes, offering a cross-scale theoretical framework for the design of high-energy-density batteries. Moreover, it extends to other systems with large volumetric changes, such as lithium metal and sulfur cathodes.

CAS / MDL: 308068-56-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Analytical Methods · 2026 · IF 2.6

A novel electrochemical aptasensor based on β-cyclodextrinylated graphene and double-stranded DNA for ultrasensitive detection of ochratoxin A

Ningbo Li,Yongdong Wei,Mengsi Liang,Wenkun Zhang,Jie Qiao

Given that ochratoxin A (OTA) exhibits immunotoxic, teratogenic, and carcinogenic properties, it is essential to monitor its presence in food samples. In the present work, a novel electrochemical aptasensor for OTA detection uses β-cyclodextrin-functionalized graphene (CG) to enhance electron transfer and provide abundant double-stranded DNA (dsDNA) binding sites. The sensor immobilizes OTA aptamers, complementary DNA (cDNA), and ferrocene-labeled dsDNA on a gold nanoparticle-modified electrode. The host–guest interaction between β-cyclodextrin (β-CD) and ferrocene (Fc) stabilizes the sensing layer, while thiolated dsDNA ensures strong attachment to AuNPs. Without OTA, impedance is high and current is low. In the presence of OTA, its high affinity for the aptamer induces conformational changes in dsDNA. Upon applying an oxidative potential, ferrocene is oxidized to Fc+, which, due to reduced hydrophobicity, dissociates from β-CD. This releases dsDNA from the electrode surface, reducing the impedance and enhancing the current response. The sensor demonstrates a robust response across a concentration range of 1 pg mL−1 to 100 ng mL−1, achieving a detection limit of 0.78 pg mL−1. Notably, this method has been successfully applied to detect OTA in wine, yielding high recovery rates of 96.20% to 98.67%. These findings suggest that the MCH/AuNPs/dsDNA/CG/GCE configuration is a promising electrochemical sensor for OTA detection.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Materials Today Communications · 2026 · IF 4.5

In situ growth of oriented (AlxGa1-x)2O3 nanorod arrays on FTO glass substrates through forced hydrolysis

Wenhui Zhu,Shiqi Jin,Jun Zhu,Kexiong Zhang,Sihua Ha

Large-area, high-density, and directionally arranged (Al x Ga 1- x ) 2 O 3 nanorod arrays were successfully synthesized in situ on FTO glass substrates via a simple hydrothermal method using Ga(NO 3 ) 3 and Al(NO 3 ) 3 mixed aqueous solution as precursor. Compared to powder samples, the thin-film samples exhibited a stronger preferred orientation, with the nanorod arrays growing preferentially along the [110] direction. The formation mechanism of the oriented nanorod arrays is proposed according to the model of liquid phase heterogeneous nucleation and anisotropic crystal growth. As the Al composition increased, the crystallite size decreased, the specific surface area increased, and the optical band gap widened. This study presents a promising candidate for further gas sensor application.

CAS / MDL: 69365-72-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2026 · IF 6.9

Ion-Diffusion-Engineered Copper-Halide PIN photodiodes with fast response and high detectivity for UV sensing and turbidity measurement

Jiaquan Li,Huimin Duan,Hainan Qin,Sheng Ma,Xiaopeng Huang,Xiaobing Cao,Weijia Yang,Xin He,Yiming Sun,Weidong Song

Ultraviolet (UV) photodetectors are essential for applications such as environmental monitoring, flame detection, and biomedical imaging. Nevertheless, constructing high-quality p-i-n (PIN) heterojunctions in solution-processed wide-bandgap ionic semiconductors such as all‑inorganic copper halides remain challenging because of interfacial ion interdiffusion and defect generation. Herein, ion–diffusion engineering was employed to self-assemble a p-CuI/i-CsCu 2 I 3 /n-GaN PIN photodiode via controlled Cu + and Cs + interdiffusion from an evaporated CuI/CsI bilayer, yielding a phase-pure CsCu 2 I 3 intrinsic layer while simultaneously preserving a continuous CuI cap and sharp interfaces with n-GaN. The broad depletion region in the i–layer effectively suppressed trap–assisted recombination and leakage currents, enabling self–powered, narrowband UV detection with a peak responsivity of 186 mA/W, a specific detectivity of 1.05 × 10 11  Jones at 0 V, and a 133 μs rise time. Compared with commercial UV-enhanced Si photodiodes, the device shows higher responsivity, lower dark current, and enhanced linearity for turbidity sensing across a wide range of 200–1000 NTU. This work demonstrates a scalable strategy for the fabrication of ionic–semiconductor PIN junctions and provides a versatile route toward high-performance, stable UV sensors for monitoring applications.

CAS / MDL: 7681-65-4 7789-17-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CERAMICS INTERNATIONAL · 2026 · IF 5.6

Thermal shock resistance and failure mechanisms of SiCf/SiC joints reinforced by nano-network structure

Meihan Ren,Xiao You,Han Luo,Xiaohu Li,Ruiqing Zhao,Xiaowu Chen,Qingliang Shan,Jixiang Dai,Jinshan Yang,Xiangyu Zhang,Shaoming Dong

SiC f /SiC ceramic matrix composites are widely used in extreme thermal environments, where the joint region governs the structural reliability. In this work, the thermal shock resistance and failure mechanisms of SiC f /SiC joints reinforced by nano-network structure are investigated. Simulation results reveal that capillary forces drive molten Si to preferentially infiltrate small pores, while gas entrapment in larger pores leads to delayed infiltration and residual defects. Under thermal shock cycles at 1000 °C and 1200 °C, the joints exhibit progressive interfacial degradation and structural weakening. Microstructural observations confirm that thermal fatigue damage initiates at the interface between the SiC f /SiC substrate and the joint layer and propagates inward. After 30 cycles of thermal shock at 1000 °C and 1200 °C, the shear strength retention decreases to 10.83 % and 3.88 %, respectively. This study clarifies the damage mechanisms of SiC f /SiC joints under thermal shock and offers insights for designing high-reliability joints for extreme environments.

CAS / MDL: 63148-65-2 64-17-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2026 · IF 9.7

Coupling urea production and energy output in Zn-nitrate/carbon dioxide batteries enabled by porous copper‑nickel bimetallic catalysts

Guoning Chen,Jianbing Chen,Sanshuang Gao,Jun Li,Bohao Chang,Xuguang An,Linfeng Xiao,Hao Cheng,Guangzhi Hu,Yujie Ma

Conventional urea industry faces dual challenges of high energy consumption and carbon emissions. Although electrochemical co-reduction of nitrates and carbon dioxide (CO₂) offers a promising route for green urea synthesis, its electrical-to-chemical energy conversion efficiency remains constrained by sluggish reaction kinetics and high electrical energy demand. Here, we design and report a nitrogen-doped porous carbon (NC) material embedded with dispersed copper‑nickel bimetal nanoparticles (CuNi/NC) for constructing the first example of a Zn-nitrate/CO₂ battery that can output electricity while generating urea with a superior energy efficiency of 1.51 mol urea kWh −1 and a urea production rate of 110 mg h −1 g cat −1 . The proposed assembled battery exhibits exceptional stability over 300   h , retaining high urea Faradaic efficiency at 36% and yield at 101 mg h −1 g cat −1 . In situ X-ray absorption spectroscopy, infrared spectroscopy, and density functional theory simulations confirm that the active metal sites facilitate substrate adsorption and stabilize critical intermediates (* N-C-N , *NH₂, and *NO), thereby effectively accelerating C N coupling. This work breaks the ‘high-energy, single-function’ bottleneck of traditional electrochemical systems, establishing an innovative ‘carbon-negative energy supply’ paradigm for carbon-neutral agriculture and decentralized energy systems.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Environmental Chemical Engineering · 2026 ·Vol. 14 ·期 2 ·121494 · IF 7.2

Polyacrylic acid-mediated sulfamethoxazole degradation by hydroxyl radicals during FeS oxidation under aerobic conditions

Dong Cheng,Jiaqing Luo,Runhao Ma,Fan Wu,Binbin Wang,Yingying Ma,Guangyu Lou,Feng He

Iron sulfide (FeS) nanoparticles demonstrate great potential for degrading organic contaminants under aerobic conditions through the production of hydroxyl radicals (•OH). However, its oxidative efficacy is often constrained by low electron utilization efficiency. In this study, we developed a polyacrylic acid (PAA)-mediated FeS oxidation system and investigated its effectiveness in sulfamethoxazole (SMX) degradation. The results indicate that PAA substantially enhanced the degradation of SMX by FeS at oxic conditions. As PAA dosage increased from 0.1 to 0.4 g/L, the observed degradation rate constants ( k obs ) of SMX were enhanced by 3- to 10-fold. Quenching experiments identified •OH as the primary reactive species responsible for SMX degradation. The electron utilization efficiency of FeS for •OH production was significantly increased from 0.3 % in FeS-only system to 2.1 % upon the addition of 0.4 g/L PAA. The enhancement was primarily attributed to the formation of dissolved Fe(II)-PAA complexes and the promotion of Fe redox cycling by PAA. By combining intermediate identification with density functional theory calculations, the degradation pathway of SMX was elucidated thoroughly. Additionally, the FeS/PAA/O 2 system exhibited exceptional degradation efficiency toward other common organic pollutants. X-ray diffraction and transmission electron microscopy revealed that PAA inhibited the formation of crystalline γ-FeOOH during FeS oxidation, which instead leads to the generation of amorphous structures. Collectively, this study provides fundamental insights into the oxidizing performance of FeS/PAA system and proposes a promising remediation technique for removing sulfonamide antibiotics.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COLLOID AND POLYMER SCIENCE · 2026 · IF 2.3

Construction of succinoglycan riclin-Pt (IV) conjugates for carrying resveratrol: a potential tool for biomedical applications

Zhang Hongmei,Wang Pengge,Yang Yunxia,Zhu Daliang,Wang Yanqing

Succinoglycan riclin (RIC), a natural polysaccharide with diverse biological activities, was employed as a drug carrier to construct a novel nanoplatform. Polysaccharide-Pt(IV) conjugates were synthesized via esterification between the hydroxyl groups of RIC and a Pt(IV) prodrug, which was subsequently loaded with resveratrol (RES) to form the RES@RIC-Pt(IV) nanoplatform. The successful synthesis and physical properties of the complex were confirmed through multiple characterization techniques. Pt(IV) was significantly bonded to the polysaccharide chain. The drug loading capacities for platinum and RES were quantified using ICP-OES and UV–Vis spectrophotometry, respectively. The percentage of Pt content in RIC-Pt (IV) conjugates can be calculated as 11.71%. In vitro cytotoxicity assays revealed that the RES@RIC-Pt(IV) platform exhibited significantly enhanced toxicity against HepG2 and LO2 cancer cell lines compared to individual small-molecule drugs. These results demonstrate that this multi-drug delivery system achieves a potent synergistic anticancer effect, highlighting its potential for improved cancer therapy. Graphical abstract

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。