CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Kanming Wang,Jiayao Chen,Chikai Sun,Shennuo Huang,Yichong Zhang,Ji Shu,Huaxin Zou,Hongyu Wang
Water contact angle of 1:2 CTF/TiB 2 superhydrophilic functionalized membrane is 3.6° • Schottky junction was formed with the combination of TiB 2 and CTF • Reactive species of •OH and 1 O₂ under simulated sunlight irradiation was produced • Excellent a self-cleaning characteristics and high permeability was achieved • Real secondary effluent application validated the practical use of this membrane Membrane separation is promising for emerging contaminants removal as an advanced treatment process, but most of the photocatalytic membrane is hydrophobic with severe fouling and permeability loss after filtration. Herein, a novel superhydrophilic CTF/TiB 2 functionalized membrane was developed, which can efficiently remove typical pharmaceutical pollutants with self-cleaning characteristics. The water contact angle of the pristine membrane dramatically reduced from 76.6° to 3.6° with CTF/TiB 2 (mass ratio 1:2) incorporation. The optimized 1:2 CTF/TiB 2 membrane demonstrated outstanding performance for typical pharmaceutical contaminants, achieving high removal efficiencies of 92% for trimethoprim (TMP) and > 97% for chloroquine (CLQ). Mechanistic studies reveal that the CTF/TiB 2 modified membrane exhibits outstanding chemical adsorption properties, enriching pollutants on the membrane surface with an adsorption capacity of 73.16 mg/g. The Schottky junction formed by the modified membrane, as evidenced by band structure analysis and DFT calculations, efficiently generates reactive species including •OH and 1 O₂ under simulated sunlight irradiation, facilitating photocatalytic degradation of pollutants both on the membrane surface and in the aqueous solution. The functionalized membrane also showed excellent self-cleaning characteristics with lower membrane fouling propensity and stable permeability. Furthermore, the successful treatment of real secondary effluent validated the practical potential of this functionalized membrane. Overall, this work successfully fabricates a novel CTF/TiB 2 multifunctional catalytic membrane with effective typical pharmaceutical removal and self-cleaning features, suggesting that it is a promising advanced wastewater treatment technology. Download: Download high-res image (301KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
TALANTA
·
2026
·
IF 6.7
Yu Tang,Ou Wang,Heyu Wang,Qingmin Hu,Yongmei Zhao,Baoli An,Xiaohong Wang,Jiaqiang Xu
The severe impact of humidity on low-temperature sensing performance has long been an urgent issue to be addressed in the field of semiconductor gas sensors. In many scenarios, such as breath analysis, sewers, swamps and mines, H 2 S coexists with a large amount of water vapor, making it particularly necessary to improve its low-temperature moisture resistance. In this paper, A HEA was fabricated and employed to improve the low-temperature moisture resistance of SnO 2 -based H 2 S sensors. The results show that 1.5 wt% HEA modified SnO 2 exhibits the best sensitization performance toward H 2 S gas sensor, and excellent moisture resistance at low temperatures. At high relative humidity (RH=80%), a response of 15 was maintained with no decline over the 7-day test period. At the same time, it can also enhance the H 2 S (0.5 ppm) response on SnO 2 from 1.2 to 22, lower the response time from 30 s to 4 s, the recovery time from 140 s to 101 s, and decrease the limit of detection (LOD) down to 41 ppb at 70 °C. Theoretical calculations show that HEA can enhance the competitive adsorption of oxygen to water, thereby increasing the concentration of reactive oxygen species (ROS). Additionally, the electron transfer from HEA to SnO 2 can jointly regulate the energy-to-structure and carrier concentration of SnO 2 , promoting the adsorption of oxygen and the reaction with H 2 S. This study offers a new strategy for improving the low-temperature performance of gas sensors under high-humidity environments.
✓ 已验证
DOI
PubMed
高影响因子
SOLID STATE NUCLEAR MAGNETIC RESONANCE
·
2026
·
IF 1.8
Shijia Jiang,Yanxin Liu,Wanli Zhang,Jun Xu
Layered metal hydroxides can be exfoliated into functional nanosheets via solvent intercalation, yet probing the atomic-level solvation processes remains challenging. Herein, we employ 79/81 Br solid-state nuclear magnetic resonance (SSNMR) spectroscopy to directly probe the local environments of interlayer anions in bromide-intercalated layered yttrium hydroxide (LYH-Br). Upon treatment with a series of solvents of varying polarity, the overall spectral lineshapes remain largely unchanged in weakly interacting systems (toluene (PhMe), acetone (ACE), isopropanol (IPA)), indicating preservation of the local structural framework. Increasing solvent polarity leads to a reduction in 79 Br NMR signal intensity, particularly in the case of formamide (FM). By combining complementary characterization techniques and transverse relaxation analysis, we show that this signal attenuation originates from shortened T 2 relaxation times rather than structural degradation. These results reveal that polar solvent intercalation perturbs the local dynamics and solvation environment of interlayer Br − anions. Furthermore, solvent-induced effects are largely reversible for PhMe, ACE, IPA and N, N-dimethylformamide (DMF) upon vacuum drying, whereas FM remains trapped within the interlayer spaces, illustrating stronger host-guest interactions and altered local dynamics. This work demonstrates solid-state 79/81 Br NMR as a powerful tool for directly distinguishing solvation-driven intercalation mechanisms in layered materials.
✓ 已验证
DOI
PubMed
高影响因子
POLYMERS FOR ADVANCED TECHNOLOGIES
·
2026
·Vol. 37
·期 6
·e70639
·
IF 3.8
Rui Wang,Xuanmin Zhu,Huanhuan Bai,Yanli Xiang,Qiang Ren,Chenyi Wang,Xu Meng
The work designed and synthesized a block copolymer emulsifier composed of hydrophilic segments (acrylic acid) and hydrophobic segments (methyl methacrylate) via reversible addition-fragmentation chain transfer (RAFT) polymerization. Using this emulsifier as a stabilizer, polymer emulsions were successfully prepared through emulsion polymerization, forming stable latex particles. The emulsion was applied to cotton fabrics, forming a hydrophobic coating with micro-nano rough structures on their surfaces. Results showed that the static water contact angle of the treated fabrics significantly increased to over 110°, reaching 130°, demonstrating excellent water repellency. Furthermore, this system is entirely fluorine-free, avoiding environmental and health hazards associated with traditional fluorinated compounds. The covalent bonding of the RAFT emulsifier to the polymer chain effectively suppresses emulsifier migration, enhancing the durability and stability of the coating. This work provides a viable technical pathway for developing green, efficient, fluorine-free water-repellent finishing agents.
✓ 已验证
DOI
高影响因子
BIOMATERIALS
·
2026
·
IF 13.6
Ziyao Zhang,Fangming Zhang,Wangting Yang,Jingxia Xu,Zhuyuan Peng,Xinyu Zhao,Yen Wei,Guofeng Li,Wensheng Xie,Xing Wang
Pancreatic cancer has a dismal five-year survival rate of only ∼13%, owing to its insidious onset, rapid progression, and frequent primary or acquired resistance to gemcitabine (Gm). Moreover, intratumoral bacteria capable of expressing cytidine deaminase (CDD) can undermine the therapeutic efficacy of Gm and contribute to chemoresistance. To address this challenge, antibiotic-drug conjugates (AiDCs, Tob-SS-Gm NPs) were developed by covalently linking tobramycin (Tob) and Gm via disulfide bonds. Tob-SS-Gm NPs retained antibacterial activity against E. coli and chemotherapeutic activity in Panc02 cells, indicating that the conjugation preserves the functional properties of both components. Meanwhile, disulfide linkage enables these AiDCs to remain stable under physiological conditions while undergoing cleavage in the high GSH tumor microenvironment, thereby releasing Tob and Gm for coordinated antibacterial and antitumor effects. In vivo evaluation demonstrated that Tob-SS-Gm NPs effectively reduced intratumoral bacterial burden and were associated with improved therapeutic response to Gm under bacteria-colonized tumor conditions. Furthermore, bacterial elimination and tumor cell damage were accompanied by modulation of the tumor immune microenvironment, including enhanced dendritic cell maturation and increased cytotoxic CD8 + T-cell infiltration. Collectively, this AiDCs strategy provides a promising approach for the treatment of intratumoral bacteria-associated, drug-resistant malignancies.
✓ 已验证
DOI
PubMed
高影响因子
Journal of Environmental Chemical Engineering
·
2026
·Vol. 14
·期 5
·123576
·
IF 7.5
Jun Luo,Junjie Ma,Yibo Xin,Hefan Zhang,Chongyang Yuan,Lili Chai,Xueying Wang,Changyu Lu
The resource utilization of waste had significant economic value and environmental benefits. Among them, constructing a light-driven advanced oxidation system using waste was an effective strategy for treating organic wastewater. This study constructed a lake sediment/g-C 3 N 4 heterojunction - Peroxymonosulfate (PMS) photocatalytic system. The photoelectrochemical experiments and in-situ XPS analysis demonstrated that the heterojunction formed by lake sediments and g-C 3 N 4 facilitated the separation and transfer of photogenerated carriers. The BET results indicate that the specific surface area of this heterojunction material reached 20.1595 m²/g. Furthermore, the joint activation of PMS by transition metals and heterojunctions effectively increased the concentration of reactive substances in the system. Under simulated natural light conditions, this system could degrade 92.17% of tetracycline (TC) within 30 min, and the mineralization rate could reach 71.99%, and the apparent quantum efficiency (AQE) is 0.77%. After five cycles, this system was still able to achieve a degradation rate of 78.828%. The degradation pathway of TC and the stability of its products were analyzed through LC-MS and DFT calculations. The Ecological Structure Activity Relationships (ECOSAR) simulation and plant cultivation experiments had confirmed that this system could effectively reduce the environmental risk of TC. This study focused on specific components in lake sediments and examines their roles during the photocatalytic process. This study employed more intuitive simulation or experimental methods to analyze the transfer pathways of photogenerated electrons, providing valuable insights for the subsequent development of sediment photocatalytic materials.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Zhilin Zhang,Xingchen Cui,Xing Gao,Xu Zhai,Zijing Huang,Jianwei Sun,Yi Tang,Yan Wang,Yu Fu,Tieqiang Wang
Microphase separation builds a porous PNIPAM skeleton for FPS hydrogel actuators. • Porous dual-network enables rapid actuation (~20° s −1 ) and high strength (~125 kPa). • Ca 2+ crosslinking and EDTA decrosslinking enable reversible, programmable deformation. • Fe₃O₄ enables thermal, photothermal, and magnetic multimodal actuation. Biological systems exhibit remarkable adaptability and complex morphological transformations in response to environmental stimuli, inspiring the design of soft materials capable of programmable actuation. However, traditional stimuli-responsive hydrogels suffer from inherently low mechanical strength, leading to a fundamental trade-off between high strength and rapid responsiveness that limits their practical applications in load-bearing and dynamic environments. Herein, we report a sponge-like Fe 3 O 4 –PNIPAM/SA (FPS) composite hydrogel actuator that integrates multimodal actuation capability, rapid response, enhanced mechanical robustness, and dynamic reprogrammability. The FPS hydrogel is fabricated via temperature-induced microphase separation polymerization of PNIPAM, followed by in-situ nanomineralization of magnetic Fe 3 O 4 nanoparticles and Ca 2+ -mediated crosslinking reinforcement of the SA network. Owing to the synergistic effects of the interconnected porous architecture and dual-network reinforcement, the FPS hydrogel exhibits a fast actuation rate (~20° s −1 ) and enhanced mechanical strength (~125 kPa). Moreover, spatially controlled Ca 2+ crosslinking and EDTA-assisted de-crosslinking allow reversible patterning and reconfiguration of the actuator's deformation behavior, enabling diverse actuation modes such as crawling, navigation, and contraction under thermal, optical, or magnetic stimuli. This work provides an enhanced mechanical and reprogrammable hydrogel platform, offering new avenues for the development of adaptive soft robots, wearable systems, and intelligent biomedical devices. Download: Download high-res image (129KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
ANALYTICAL AND BIOANALYTICAL CHEMISTRY
·
2026
·
IF 4.1
Sang Fuming,Bai Yinglun,Hu Naixin,Li Menglin
A dual-ratiometric assay combining fluorescence and colorimetry is constructed based on a gold(I)-triggered in situ reaction between o -phenylenediamine (OPD) and ascorbic acid (AA). OPD is oxidized by gold(I) to form fluorescent 2,3-diaminophenazine (OPDox), which has an absorption peak centered at 445 nm and a fluorescence emission at 555 nm. When AA is introduced, AA can be oxidized to dehydroascorbic acid (DHAA) by gold(I), inhibiting the production of OPDox. Simultaneously, DHAA reacts with OPD to form a fluorescent quinoxaline derivative (DFQ), which exhibits an absorption peak around 340 nm and a fluorescence emission at 425 nm. Based on this redox-modulated strategy, a highly selective dual-mode sensing assay is established with ratiometric colorimetric ( A ₃₄₀/ A ₄₄₅) and ratiometric fluorescence ( F ₄₂₅/ F ₅₅₅) signals. This method enables the quantitative analysis of AA, with limits of detection (LOD) of 0.09 μmol/L and 0.04 μmol/L, respectively. Owing to its facile analytical procedure, this assay exhibits many merits including simplicity, excellent selectivity and good biocompatibility, and has been successfully applied to detect AA in human serum samples. Such an approach based on the in situ formation of fluorophores provides a valuable tool for AA detection in clinical diagnosis and drug screening. Graphical
The alternative text for this image may have been generated using AI.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2026
·Vol. 37
·期 16
·1282
·
IF 3.2
Jia Yadong,Lin Huang,Xia Zhaoyue,Yang Hui,Zhang Qilong
Piezoelectric nanogenerators based on the piezoelectric effect have attracted widespread attention. With the advancement of wearable piezoelectric nanogenerators, particularly the continuous expansion of their application scenarios, greater demands are being placed on the flexibility and piezoelectric output of nanogenerator devices. Herein, to address this issue, silver-decorated zinc oxide nanorods were prepared and incorporated into P(VDF-TrFE) to fabricate a flexible composite material with excellent piezoelectric performance. Zinc oxide nanorods were first grown via a hydrothermal method, followed by the successful decoration with silver nanoparticles through visible-light-induced self-assembly. Upon constructing an Ag/ZnO heterojunction, the polarization charges within the zinc oxide (ZnO) nanorods undergo directional migration toward the Ag nanoparticles under mechanical strain. This charge transfer behavior significantly amplifies the macroscopic piezoelectric output of the Ag/ZnO nanorod-embedded P(VDF-TrFE) composite, leading to a marked enhancement in its overall piezoelectric performance. Optimally, at a doping concentration of 7.5 wt%, the composite achieves an output voltage of approximately 17.5 V and a current of about 0.4 μA, which are approximately 2.3 times and 1.2 times those of pure P(VDF-TrFE) film, respectively. This outstanding output enables the PENG to be applied in monitoring various human motions. This work offers a fresh perspective on material design, opening up new avenues for the development of high-performance PENGs.
✓ 已验证
DOI
高影响因子
Food and Bioprocess Technology
·
2026
·Vol. 19
·期 7
·351
·
IF 5.6
Sheng Jie,Song Shuxuan,Wang Wenbo,Zhang Jialong,Wang Jiaxin,Chen Ziyi,Sun Maoquan,Huang Honghua,Song Yishan
This study utilised microfibrillated cellulose (MFC) and acetylated starch (AS) as structural frameworks, with 4- terpineol (4-TA) serving as the antimicrobial agent. A multifunctional biodegradable aerogel with water absorption, antibacterial, cushioning and slow-release properties has been developed as a freshness-preserving pad for fruit and vegetables. The system analysed the effects of different mass ratios of MFC/AS on the density, porosity, mechanical properties, water absorption rate, and oil absorption rate of aerogels. Additionally, the release characteristics, antibacterial properties, and biodegradability of the aerogel were investigated. The results indicate that, the aerogel with a MFC/AS mass ratio of 1:3 has the best comprehensive performance, exhibiting a compressive strength of 0.030 ± 0.002 MPa and an springiness of 0.577 ± 0.031. It also exhibits exceptional water and oil absorption capacities, reaching 1549.40 ± 38.29% and 3887.33 ± 86.56%, respectively. Moreover, it also exhibits fine sustained-release properties, antibacterial performance and biodegradability. Following 240 h of release, more than 50% of 4-TA remained encapsulated within the aerogel. The inhibition zone diameters against Escherichia coli and Staphylococcus aureus were 30.37 ± 1.25 mm and 32.25 ± 1.04 mm, respectively. The application of aerogel to strawberry preservation extends their shelf life from 1 to 3 days, outperforming commercially available preservation pads. Therefore, this study offers a novel approach for the development of fruit and vegetable preservation pads. Graphical
The alternative text for this image may have been generated using AI.
✓ 已验证
DOI
高影响因子
MICROCHIMICA ACTA
·
2026
·Vol. 193
·期 7
·458
·
IF 5.4
Zhou Yaqiu,Zhu Linlian,Li Mengwei,Yao Yi,Su Mengjie,Wu Zengqiang,Yu Chunmei
A flexible electrochemical sensing platform on the basis of carbon cloth modified with zeolite imidazole framework-67/carbon nanotubes nanocomposite with catalase-like activity was developed for in situ and real-time tracking of H 2 O 2 produced by living cells. The obtained sensor exhibits excellent electrochemical performance for detecting H 2 O 2 with a broad linear response range from 1 µM to 5.2 mM and a detection limit of 0.3 µM. Owing to the favorable biocompatibility and mechanical stability of the prepared electrodes, living cells can be proliferated well on their surfaces, thereby achieving in situ and real-time profiling of endogenous H 2 O 2 flux from normal and cancer cells. This work proposed a novel sensing platform for extracellular analysis, providing an innovative tool for the dynamic monitoring of biomarkers generated by cellular metabolism in cell biology. Graphical abstract The alternative text for this image may have been generated using AI.
✓ 已验证
DOI
PubMed
高影响因子
RESEARCH ON CHEMICAL INTERMEDIATES
·
2026
·
IF 3.3
Chen Ziang,Liu Yanbing,Zhou Ting,Shi Yu,Tao Yuanyuan,Jiang Wei,Gu Binxian,Hu Qingsong
Developing green and efficient photocatalysts is crucial in addressing the energy crisis and environmental remediation. In this study, we synthesized novel S, N co-doped graphene quantum dots (S, N-GQDs) anchored PbBiO 2 I nanospheres employing a reactive ionic liquid-assisted facile one-step solvothermal approach. We prepared a variety of S, N-GQDs/PbBiO 2 I nanocomposite with different loading amounts of S, N-GQDs and investigated their photocatalytic performance. Among these, S, N-GQDs/PbBiO 2 I-2 exhibits the highest degradation efficiency for antibiotic removal. The incorporation of S, N-GQDs significantly broadens the visible-light absorption range and accelerates the migration of photoinduced carriers, thereby enhancing photocatalytic activities. Various characterization techniques and experimental analyses were employed to explore the charge carrier transfer pathway in this system. Notably, the developed photocatalyst demonstrates two exceptional advantages: a broad-spectral response capability and environmentally-friendly properties, which are of significant relevance for practical applications. This study provides insights for the rational design of high-performance, wide-spectral-light-driven, and environmentally-friendly photocatalysts in the field of environmental remediation.
✓ 已验证
DOI
高影响因子