Journal of Energy Storage
·
2026
·
IF 9.8
Junchun Xi,Bohui Zhao,Liang Chen,Yuxiang Chen,Yongfeng Yuan,Pingfan Du
Lithium-sulfur (Li-S) batteries face challenges such as the shuttle effect of lithium polysulfides (LiPSs) and sluggish reaction kinetics. Herein, a freestanding interlayer is constructed by in-situ growing carbon nanotubes (CNTs) encapsulated with CoP 2 /Ni 2 P heterostructured nanoparticles on the surface of waste viscose derived carbon fibers (Ni-Co-P@CNT/CF). The surface of the carbon fibers exhibits a “nano jungle” like morphology. The interconnected carbon fibers framework ensures efficient electron transport. While the tentacle-like Ni-Co-P@CNT structure facilitates the efficient capture of dissolved LiPSs and promotes their liquid-solid reaction. The built-in electric field (BIEF) at the heterointerface facilitates electron transfer, promotes the Li + diffusion and lowers the energy barriers of sulfur species conversion, which enhances LiPSs chemical adsorption and accelerates their conversion kinetics. Electrochemical tests demonstrate its outstanding performance. The cell delivers an impressive reversible capacity of 994 mAh g −1 after 300 cycles at 0.2C with a low decay rate of 0.049% per cycle. When the current density increases to 1.0C, the cell retains 580 mAh g −1 after 450 cycles. Even under high sulfur loadings (3.9 mg cm −2 ), the interlayer can still maintain stable catalytic activity.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 13.2
Huiyuan Cheng,Jingwei Hu,Shaoke Bu,Yushuang Shi,Guangping Lei
The escalating atmospheric concentration of CO 2 has intensified the demand for efficient carbon capture technologies. Here, an innovative composite adsorbent, Cu-Salophen@Cu-BTC, was successfully synthesized via an in-situ encapsulation strategy to enhance the selective adsorption of CO 2 from CO 2 /N 2 mixture. The incorporation of Cu-Salophen into the Cu-BTC framework was confirmed through XRD, ICP-OES, and FT-IR analyses. The composite exhibited a notable improvement in CO 2 uptake capacity, reaching 8.14 mmol g −1 (273 K) and 4.63 mmol g −1 (298 K) at 100 kPa, representing increases of 11.81% and 12.11%, respectively, compared to pristine Cu-BTC. Moreover, the CO 2 /N 2 separation performance was enhanced by 23.44% (273 K) and 36.06% (298 K). GCMC simulations revealed that the superior performance arises from the synergistic effects of additional adsorption affinities of CO 2 and real-time pore size regulation enabled by the mobile Cu-Salophen molecules. The composite also demonstrated excellent recyclability and improved water stability, underscoring its potential for industrial post-combustion CO 2 capture.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2026
·
IF 7.9
Li-Qian Cheng,Yi Gong,Jiangyun Ding,Jingye Pan,Kai Chen,Xuxia Hao,Yu Dai,Min Jiang,Xinyuan Xie,Fan Yang,Ruiping Liu
High-manganese-to-iron-ratio lithium manganese iron phosphate (LMFP) is a promising candidate for next-generation electric vehicle cathodes due to its high energy density, low cost, and safety. However, its poor cycling reversibility, especially at elevated temperatures, has limited its practical application, which is mainly due to the Jahn-Teller effect and Mn-ion dissolution. Ion doping is a commonly used modification method. Herein, in this work, a novel V/F co-doping and Mn 2+ capture membrane coated with CNT-doped hydroxyapatite (HAP-C) were employed to modify LMFP. The V/F co-doped LMFP showed enhanced structure stability during cycling tests compared to LMFP, and the capacity retention rate increased to 89.5 % after 300 cycles at 1C/1C. Meanwhile, the Mn 2+ -capturing separator further protected the anode stability by preventing the deposition of dissolved manganese ions. Due to these combined properties, the doped cathode battery using the HAP-C modified separator exhibited less manganese deposition on the anode. After 300 cycles at 1C/1C, 25 °C, the capacity retention rate further improved to 96.7 %, and after 300 cycles at 0.5C/0.5C, 45 °C, the capacity retention rate increased to 84.0 %, demonstrating outstanding cycling stability. This comprehensive strategy provides a basis for developing high-energy-density and long-cycle-life lithium-ion battery.
✓ 已验证
产品关联
DOI
高影响因子
Scientific Reports
·
2026
·Vol. 16
·期 1
·4677
·
IF 3.9
Cao Yingjian,Wang Quan,Yao Yingkang,Zhang Jiabao,Wang Fengqi,Liu Zhiyu,Lu Kaiyan,Yang Yaoyong,Li Rui,Xu Xiaomeng
To improve the performance of bulk emulsion explosives, a coal powder water slurry (CPWS) was prepared and introduced to partially replace ammonium nitrate. The microstructure, particle size distribution, and thermal decomposition behavior of emulsified matrices with different CPWS contents were investigated using optical microscopy, laser particle size analysis, and thermogravimetry. The Kissinger method was applied to calculate activation energy, while detonation velocity and brisance were measured. Results show that both viscosity and explosive performance first increased and then decreased with rising CPWS content. The 6% CPWS formulation exhibited the highest detonation velocity (4103.88 m·s − 1 ) and brisance (11.51 cm), along with the lowest activation energy (118.67 kJ·mol − 1 ). In contrast, 12% CPWS led to the highest activation energy (172.46 kJ·mol − 1 ). Overall, the 6% CPWS composition provided the best balance of viscosity, explosive power, and thermal behavior, demonstrating its potential for practical application.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Environmental Technology & Innovation
·
2026
·
IF 7.1
Yunji Wang,Lin An,Liji Chen,Kaiqing Fan,Jidong Ying,Chuxia Lin,Junhao Qin,Rongliang Qiu
Mitigating arsenic (As) accumulation in rice while maintaining yield is a critical challenge for food safety. This study demonstrates that in-situ reactive oxygen species (ROS) generation, driven by hydrogen peroxide (H 2 O 2 ) from natural rain and anthropogenic source (urea hydrogen peroxide, UHP), effectively addresses this challenge. A pot experiment revealed that both H 2 O 2 sources, especially UHP, significantly induced in-situ production of ROS levels (H 2 O 2 and hydroxyl radicals (•OH). The ROS burst effectively suppressed the mobility of As by oxidizing 57–83 % of the mobile As(III) to the less bioavailable As(V) in soil porewater during the heading stage, thereby significantly reduced As accumulation in both aboveground and belowground tissues by 15.3–34.7 %. Critically, total As concentration in rice grains was markedly decreased by 17.7–30.1 % under both H 2 O 2 sources, with UHP being more effective than rain, and showed significant negative correlations with both H 2 O 2 and •OH levels. Simultaneously, rice yield was significantly improved, showing the greatest enhancement under UHP amendment, and demonstrating a strong positive correlation with ROS levels. These findings confirm that H 2 O 2 -driven ROS generation, particularly from UHP amendment, provides a promising in-situ strategy for the dual goals of reducing grain As accumulation and enhancing yield in As-contaminated paddy fields.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry A
·
2026
·
IF 9.5
Cuicui Li,Qiyun Pan
The lack of efficient and stable anode materials restricts the development of sodium ion batteries (SIBs). Organic materials have excellent sodium ion transmission performance and rich structural adjustability, showing broader application prospects. However, their high solubility and poor conductivity cause unsatisfactory electrochemical performance. In this study, a phenazine-based polymer poly(benzoquinone-alt-diaminophenazine) (PBDP) is developed by polymerizing benzoquinone (BQ) and 2,3-diaminophenazine (DAP) through a mild reaction. The introduced π-conjugated amino groups and extended aromatic plane not only suppress the dissolution of small molecules, but also improve the structural integrity and conductivity of the whole molecule. The obtained PBDP polymer demonstrates a battery capacity of 385 mAh g−1 at 0.05 mA g−1. Notably, it achieves a capacity retention of 87% over 5000 cycles at 1.0 A g−1. Moreover, it retains a capacity of 169 mAh g−1 after 10000 cycles at an ultrahigh current density of 2.0 A g−1. The energy storage mechanism involves redox reactions occurring at the imine sites. This work paves the way for designing high-performance organic electrode materials.
✓ 已验证
产品关联
DOI
高影响因子
Surfaces and Interfaces
·
2026
·
IF 6.3
Yingze Li,Guohua Jiang,Xingyue Tang,Chunming Ji,Lianchao Wang,Jiqiang Hu,Bing Wang,Xinghong Zhang
The relatively weak interfacial adhesion existed between poly (ether ether ketone) (PEEK) and carbon fiber (CF) and is a constantly problem that restricts the mechanical performance and structural- functional integrated design of CF/PEEK composites. To meet with the interface stable and multifunctional demands of high-performance CF/PEEK composites, an organic- inorganic combination strategy was proposed to synchronous optimize the interfacial adhesion and electromagnetic interference (EMI) shielding performance of CF/PEEK composites. Herein, conductive polyaniline (PANI) was in-situ polymerized onto MXene, along with carbon nanotubes to prepare a mixture sizing agent to coat CF surface. The synergistic enhancement effects of interfacial interactions, mechanical interlocking, and wettability contributed to the elevated interfacial and mechanical properties of CF/PEEK composites. Besides, evenly coated sizing layers enhance the conduction loss, interfacial polarization loss and dipole polarization loss at interface, which led to a remarkable improvement in EMI shielding performance of CF/PEEK composites. In brief, this facile and feasible route to obtain PANI@MXene/CNTs sizing agents displays a considerable potential in fabricating CF/PEEK composites possessed the structural- functional integrated performance.
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Chemistry
·
2026
·
IF 6.7
Xiaoyi Zhang,Zihang Wu,Chen Wu,Shenglan Ma,Guoliang Lin,Guohui Yan,Youqing Su,Ligeng Xu
In this study, two 1,8-naphthalimide (NA) derivatives with primary amino groups (EDA-NA, synthesized from ethylenediamine; and DAT-NA, synthesized from 3,5-diaminotriazole) were synthesized and evaluated as corrosion inhibitors for Q235 carbon steel in chloride-contaminated simulated concrete pore solution. Short-term corrosion tests determined that the optimal concentration for both inhibitors was 400 mg/L. At this concentration, the effects on steel passivation and long-term resistance to chloride-induced corrosion over 21 d were examined by electrochemical testing and surface analysis. The results indicate that both EDA-NA and DAT-NA promote the passivation of steel. The passive film thicknesses calculated from X-ray photoelectron spectroscopy measurements were 3.38 nm and 3.70 nm, respectively (compared to 3.16 nm without corrosion inhibitor). Additionally, both significantly enhance the corrosion resistance of carbon steel in chloride environments, maintaining excellent corrosion inhibition capabilities even after 21 d of exposure. DAT-NA maintains maximum protective efficacy, with a corrosion inhibition efficiency of 97.12 % as calculated by electrochemical impedance spectroscopy. Furthermore, the corrosion inhibition mechanisms of the two inhibitors were investigated. The enhanced corrosion suppression performance was primarily attributed to the spontaneous mixed adsorption of physical and chemical adsorption by the inhibitors. The outstanding long-term inhibition effect of DAT-NA was mainly attributed to the additional coordination provided by the 1,2,4-triazole ring.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CHROMATOGRAPHY A
·
2026
·
IF 4
Baocheng Ji,Yanxin Wang,Li Ma,Mengwei Zhang,Yumeng Liu,Xu Xu,Junguang Li,Ke Li,Dianbo Zhao,Yanhong Bai
A rapid, convenient, and efficient dispersive solid-phase extraction approach, integrating ultraperformance liquid chromatography–tandem mass spectrometry and pretreated pine pollen, was developed for sensitive quantification of 13 heterocyclic amines (HCAs) in sesame oil. Critical parameters, namely sorbent type and dosage, adsorption mode and duration, detergent dosage, eluent additive and volume, and elution cycles, were systematically optimized to evaluate their effects on the HCA recovery. The proposed method was verified for all the 13 HCAs, demonstrating favorable analytical characteristics with remarkable linear relationships (coefficient of determination, R 2 ≥ 0.998), adequate recoveries (64.2%–99.4%), acceptable intra- and inter-day precision (relative standard deviations ≤ 10.4%), and low limits of detection (0.02–0.83 μg/kg) and quantification (0.07–2.70 μg/kg). The proposed approach offers distinct advantages, including rapidity, simplicity, cost-effectiveness, and minimized organic solvent consumption, demonstrating great potential for accurately analyzing HCAs in complex food matrices.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nature Communications
·
2026
·
IF 15.7
Liu Shujie,Sun Mao,Dai Letian,Wang Shuhao,Yu Zhaoshi,Li Nan,Chen Feilong,Wei Yan,Shen Yan,Zhao Chuan,Wang Mingkui
For industrial water electrolysis, the development of active and stable catalysts for the oxygen evolution reaction remains a challenge. Here, we report a heterostructure catalyst composed of NiFe layered double hydroxide nanosheets anchored on pyramidal Fe 2 (MoO 4 ) 3 to activate lattice oxygen for efficient and durable oxygen evolution. Our investigation reveals that oxygen vacancies within the NiFe layered double hydroxide and the internal electrical field at the material interface optimize the electronic states, allowing oxygen atoms within the crystal lattice to participate directly in the reaction. The resulting heterostructured NiFe LDH/FeMoO catalysts possess high oxygen evolution reaction activity in 1 M KOH electrolyte with a low overpotential of 316 mV at 2 A cm −2 and maintain long-term stability over 3,000 h. Furthermore, integrating this anode into a solar-powered electrolyzer yields a high solar-to-hydrogen efficiency of 20.15%. This work provides a promising strategy for designing stable catalysts and advancing the integration of renewable energy with water electrolysis to produce clean hydrogen at scale.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials Horizons
·
2026
·
IF 10.7
Mengying Lu,Wenhao Lv,Mengwei Liu,Haoliang Bai,Song Lv
Marine floating photovoltaic (MFPV) systems face harsh challenges in high-temperature, high humidity, and high-salinity environments, which accelerate corrosion and reduce performance. We developed a transparent, superhydrophobic, and durable coating using fluorinated silica nanoparticles embedded in a cross-linked PDMS matrix, forming a nano-scale structure. The coating exhibits a water contact angle of 164°, transmittance of 88.8%, and infrared emissivity of 95.03%. It maintains 99.09% of initial photoelectric conversion efficiency (PCE) after 30 days outdoors and preserves hydrophobicity (contact angle >150°) after 720 hours of salt spray exposure. A year-long real-world test confirms its long-term stability. Global simulations show this coating can boost annual MFPV generation from 200.94 TWh to 359.18 TWh, increasing carbon reduction from 98.06 Gt to 175.28 Gt CO₂. Deploying it over 6.45–10.95% of viable ocean areas could help bridge the emissions gap to meet the Paris Agreement targets. This strategy provides a scalable solution for sustainable MFPV deployment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ANALYTICA CHIMICA ACTA
·
2026
·
IF 6
Jian-Ming Liu,Jian Liu,Tian-Tian Ma,Cheng-Xiong Yang
Background Microporous organic networks (MONs) are an emerging class of porous materials characterized by extremely large surface area, tunable topology, and superior stabilities, which have received increasing attention in sample pretreatment. However, their superhydrophobic nature has largely limited their application scope. The synthesis of functionalized MONs has proved to be a feasible strategy to broaden their utility. Nevertheless, this approach remains constrained by the limited variety and availability of functionalized monomers. Therefore, developing novel post-synthetic modification strategies is crucial for expanding the functionality and applications of MONs, particularly in trace analyte enrichment. Results Herein, we present a novel post-esterification strategy to synthesize a new carboxyl groups enriched magnetic MON (MMON-2COOH) for the highly efficient magnetic solid-phase extraction (MSPE) of four quaternary ammonium alkaloids (QAAs) from complex urine samples. The resulting MMON-2COOH not only retains the porous structure, excellent solvent and thermal stability, and rapid magnetic responsiveness of its precursor (hydroxyl-functionalized magnetic MON) but also incorporates conjugated networks and abundant carboxyl groups. This enables efficient extraction of QAAs through multiple interactions, including π-π stacking, hydrogen bonding, and electrostatic attraction. After optimization of extraction factors, an analytical method integrating MMON-2COOH-based extraction with HPLC-UV detection was established, achieving sensitive and selective determination of QAAs with low limits of detection of 0.05–0.5 μg L −1 and limits of quantification of 0.5–1.0 μg L −1 , wide linear range of 0.5–1000 μg L −1 , negligible matrix effect of 0.88–1.09, rapid extraction of 2 min, and less adsorbent consumption of 2 mg. Significance This is the first example of post-esterification preparation of carboxyl groups functionalized MON. The results demonstrate that MMON-2COOH is a highly effective adsorbent, and the developed method is suitable for accurate determination of QAAs in biological samples. This work highlights the significant potential of post-esterification as a versatile approach for designing high-performance adsorbents in sample pretreatment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子