蛋白酶磷酸酶抑制剂混合物 (通用型, 质谱兼容, 50×)

货号: P1372482
有货
级别和纯度: BioReagent ? 生物试剂级(BioReagent)—— 经测试适用于生命科学和分子生物学。适用于需要生物相容性的细胞培养、检测和生化工作。 50×
储存条件
-20°C储存
运输条件
超低温运输
★
规格
库存
价格
数量
3×1ml
P1372482-3×1ml
期货 Stock Image
¥699.90
3×5ml
P1372482-3×5ml
期货 Stock Image
¥2,999.90
请输入您要添加的产品数量

概述

  阿拉丁的蛋白酶磷酸酶抑制剂混合物 (通用型, 质谱兼容, 50×) (Protease and phosphatase inhibitor cocktail for general use, MS-safe, 50×) 是一种质谱兼容的通用型用于细胞或组织蛋白提取的蛋白酶和磷酸酶抑制剂混合物组合。本品含有一管蛋白酶抑制剂混合物(通用型, 质谱兼 容, 50X) (0.4mM Aprotinin, 25mM Bestatin, 7.5mM E64 and 10mM Leupeptin in H2O)以及一管磷酸酶抑制剂混合物(50X) (250mM sodium fluoride, 50mM sodium pyrophosphate, 50mM β-glycerophosphate and 50mM sodium orthovanadate in H2O),并提供独立包装的 0.05M EDTA。

  本产品不含AEBSF,可以避免由于AEBSF导致的质谱峰漂移,因此使用本产品提取的蛋白样品可以用于质谱(Mass Spectrometry, MS)检测和分析,如蛋白质组学(proteomics)等相关研究。

  细胞或组织提取物等样品中含有许多内源性的蛋白酶、磷酸酶等,容易导致提取物中的蛋白降解或去修饰,从而影响后续的蛋白检测。因此在提取物等样品中添加适当的蛋白酶、磷酸酶等抑制剂是防止蛋白降解和去修饰的有效方法。

  本产品为经优化和测试的用于常规细胞或组织蛋白提取等的蛋白酶和磷酸酶抑制剂混合物,包含了广谱的丝氨酸、半胱氨酸和酸性蛋白酶抑制剂/氨基肽酶抑制剂,以及丝氨酸/苏氨酸、酪氨酸、酸性及碱性磷酸酶抑制剂。

  本蛋白酶磷酸酶抑制剂混合物含0.4mM Aprotinin,25mM Bestatin,7.5mM E64和10mM Leupeptin, 250mM sodium fluoride, 50mM sodium pyrophosphate, 50mM β-glycerophosphate, 50mM sodium orthovanadate,配制在超纯水中。EDTA 为单独包装,以便选择性使用。如用于检测金属蛋白酶活性,则不宜添加EDTA。

组分表

P1372482
Component
3×1mL
3×5mL
Storage
P1372482A
蛋白酶抑制剂混合物 (通用型, 质谱兼容, 50×)
1 mL
5×1mL-20℃
P1372482B
磷酸酶抑制剂混合物 (50×)
1 mL
5×1mL-20℃
P1372482C
0.05M EDTA, pH 8.0
1 mL
5×1mL-20℃

使用说明:

  本蛋白酶磷酸酶抑制剂混合物为50×的储存液,使用时按照1:50的比例加入到裂解液中 (例如,1ml裂解液中加入20μl蛋白酶抑制剂混合物以及20μl磷酸酶抑制剂混合物),混匀后即可使用。含有蛋白酶磷酸酶抑制剂混合物的裂解液宜现用现配,不宜配制后冻存待后续使用。根据需要,0.05M的EDTA也按照1:50的比例加入到裂解液中。待所需的抑制剂添加完毕并混匀后,就可以开始进行常规的细胞或组织的裂解和蛋白提取。

注意事项:

1、本产品可以适当分装后保存,并应在临使用前添加到裂解液等适当溶液中。

2、本产品提供了独立包装的EDTA,可以选择性使用。例如,后续用于检测提取液中金属蛋白酶活性,则不宜添加EDTA。

3、本产品中含有的蛋白酶抑制剂对人体有害,操作时请小心,并注意有效防护以避免直接接触人体或吸入体内。

4、本产品仅限于专业人员的科学研究用,不得用于临床诊断或治疗,不得用于食品或药品,不得存放于普通住宅内。

5、为了您的安全和健康,请穿实验服并戴一次性手套操作。

Aladdin's Protease and Phosphatase Inhibitor Cocktail (for general use, MS-safe, 50×) is an MS-compatible, general-purpose protease and phosphatase inhibitor cocktail designed for protein extraction from cells or tissues. This product contains one tube of Protease Inhibitor Cocktail (general use, MS-safe, 50×) (0.4 mM Aprotinin, 25 mM Bestatin, 7.5 mM E64 and 10 mM Leupeptin in H₂O) and one tube of Phosphatase Inhibitor Cocktail (50×) (250 mM sodium fluoride, 50 mM sodium pyrophosphate, 50 mM β-glycerophosphate and 50 mM sodium orthovanadate in H₂O), and also provides separately packaged 0.05 M EDTA.

This product does not contain AEBSF, which can avoid the mass spectrometry peak shift caused by AEBSF. Therefore, protein samples extracted using this product can be used for mass spectrometry (MS) detection and analysis, such as proteomics and other related research.

Samples such as cell or tissue extracts contain many endogenous proteases, phosphatases, etc., which can easily lead to protein degradation or de-modification in the extracts, thereby affecting subsequent protein detection. Therefore, adding appropriate protease and phosphatase inhibitors to samples such as extracts is an effective method to prevent protein degradation and de-modification.

This product is an optimized and tested protease and phosphatase inhibitor cocktail for routine cell or tissue protein extraction, etc., containing broad-spectrum serine, cysteine and acid protease inhibitors/aminopeptidase inhibitors, as well as serine/threonine, tyrosine, acid and alkaline phosphatase inhibitors.

This protease and phosphatase inhibitor cocktail contains 0.4 mM Aprotinin, 25 mM Bestatin, 7.5 mM E64 and 10 mM Leupeptin, 250 mM sodium fluoride, 50 mM sodium pyrophosphate, 50 mM β-glycerophosphate, 50 mM sodium orthovanadate, and is prepared in ultrapure water. EDTA is packaged separately for selective use. If used for detecting metalloprotease activity, EDTA should not be added.

Component No.Component NameAppearance3×1mL3×5mLStorage
P1372482AProtease Inhibitor Cocktail (General Use, MS-safe, 50×)Liquid1mL5×1mL-20℃
P1372482BPhosphatase Inhibitor Cocktail (50×)Liquid1mL5×1mL-20℃
P1372482C0.05M EDTA, pH 8.0Liquid1mL5×1mL-20℃

Instructions for Use:

This protease and phosphatase inhibitor cocktail is a 50× stock solution. When in use, add it to the lysis buffer at a 1:50 ratio (for example, add 20 μl of protease inhibitor cocktail and 20 μl of phosphatase inhibitor cocktail to 1 ml of lysis buffer), mix well, and it is ready for use. Lysis buffer containing the protease and phosphatase inhibitor cocktail should be prepared immediately before use and should not be prepared and frozen for later use. If needed, 0.05 M EDTA should also be added to the lysis buffer at a 1:50 ratio. Once the required inhibitors have been added and mixed well, routine cell or tissue lysis and protein extraction can begin.

Precautions:

1.This product can be appropriately aliquoted for storage and should be added to appropriate solutions such as lysis buffer immediately before use.

2.This product provides EDTA in a separate package for selective use. For example, if it is subsequently used to detect metalloprotease activity in the extract, EDTA should not be added.

3.The protease inhibitors contained in this product are harmful to humans. Please handle with care, and take effective protective measures to avoid direct contact with the human body or inhalation.

4.This product is restricted to scientific research use by professionals. It must not be used for clinical diagnosis or treatment, must not be used for food or drugs, and must not be stored in ordinary residential buildings.

5.For your safety and health, please wear a laboratory coat and disposable gloves during operation.

规格

规格或纯度
BioReagent, 50×
稳定性与储存
Store at -20℃ long term (12 months). Upon receipt, it is recommended to aliquot.
英文名称
Protease and Phosphatase Inhibitor Cocktail (for general use, MS-SAFE, 50×)
储存条件
-20°C储存
运输条件
超低温运输
产品线
生物产品
名称和识别符
分子类型
生物试剂/缓冲液

高级数据

质检证书(CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱:
技术文档和文章
溶液计算器

需要帮助选择级别?

我们的级别选择指南涵盖了目录中所有的变体的纯度、稳定剂状态和应用适用性。

查看 BioReagent 级别指南 →