计算溶液所需的质量、体积或浓度。
ActiBioPure™,EnzymoPure™,生物活性,重组,高性能 级 ,适用于对基线干扰要求严格的色谱和分析工作流程。
-20°C储存,避免反复冻融。超低温运输 。请查阅批次 COA 获取详细规格。
SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。
在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。
Ascorbate oxidase also known as vitamin C oxidase, is a REDOX enzyme involved in the regulation of extracellular matrix. Ascorbate oxidase catalyzes the reaction of ascorbic acid and oxygen to produce dehydroascorbic acid.
Application
It catalyzes the oxidation of ascorbic acid to produce water and dehydroascorbic acid, and is used for in vitro research.
Assay procedure
Principle

The disappearance of ascorbic acid is measured at 245nm by spectrophotometry.
Unit definition
One unit causes the decrease of one micromole of ascorbic acid per minute under the conditions described below.
Reagents
A. Ascorbic acid solution:1.0mM [Dilute the stock solution (10mM) to 10-fold volume with 0.2M KH₂PO₄ solution containing 1.0mM EDTA.] (Prepare freshly)
Stock solution: 176mg L-ascorbic acid (MW=176.13) / 100 ml of 1.0mM HCl solution containing 1.0mM EDTA (Stable for one month if store at 0~5℃)
B. Na₂HPO₄ solution: 10mM
C. HCl solution: 0.2N
D. Enzyme diluent: 10mM Na₂HPO₄ solution containing 0.05% BSA. (Should be freshly prepared)
Procedure
1. Prepare the following reaction in a test tube and equilibrate at 30℃ for about 5 minutes.
| Substrate solution | 0.5ml | (A) |
| Na₂HPO₄ solution | 0.5ml | (B) |
(pH of the reaction mixture should be 5.6.)
Concentration in assay mixture
| KH₂PO₄ | 82mM |
| Na₂HPO₄ | 5.5mM |
| Ascorbic acid | 0.45mM |
| EDTA | 0.45mM |
| BSA | 45.4μg/ml |
2. Add 0.1ml of the enzyme solution* and mix.
3. After exactly 5 minutes at 30℃, add 3.0ml of HCl solution (C) to stop the reaction and measure the optical density at 245nm against water (OD test).At the same time, prepare the blank by first mixing the reaction mixture with 3.0ml of HCl solution (C) after 5 min-incubation at 30℃, followed by adding the enzyme solution (OD blank).
*Dissolve the enzyme preparation in ice-cold enzyme diluent water (more than 60U/ml) and dilute to 0.15~0.25U/ml with the ice-cold enzyme diluent (D), immediately before assay.
Calculation
Activity can be calculated by using the following formula:
.png)
Vt: Total volume (4.1ml)
Vs: Sample volume (0.1ml)
10.0: Millimolar extinction coefficient of ascorbic acid under the assay conditions at pH1.0 (cm²/μmol)
1.0: Light path length (cm)
t: Reaction time (5 minutes)
df: Dilution factor
C: Enzyme concentration in dissolution (C mg/ml)
通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!
| 批号(Lot Number) | 证书类型 | 货号 |
|---|---|---|
| 分析证书 | R1505819 | |
| 分析证书 | R1505819 |
我们的级别选择指南涵盖了目录中所有的变体的纯度、稳定剂状态和应用适用性。
查看 Bioactive 级别指南 → 查看 Recombinant 级别指南 → 查看 ActiBioPure™ 级别指南 → 查看 High Performance 级别指南 → 查看 EnzymoPure™ 级别指南 →