FPA固定液

货号: F1520383
有货
级别和纯度: BioReagent ? 生物试剂级(BioReagent)—— 经测试适用于生命科学和分子生物学。适用于需要生物相容性的细胞培养、检测和生化工作。 用于显微镜 ? 显微镜级 —— 适用于样品制备和成像的试剂/染料。适用于需要清晰度和低背景的显微镜检查。
别名
乙醇-丙酸-甲醛固定液
储存条件
室温
运输条件
常规运输
应用
Plant Tissue Fixation
★
规格
库存
价格
数量
500ml
F1520383-500ml
现货 Stock Image
¥249.90
请输入您要添加的产品数量
🧪

为什么选择此级别

BioReagent,用于显微镜 级 ,适用于对基线干扰要求严格的色谱和分析工作流程。

🌡

储存与运输

室温。常规运输 。请查阅批次 COA 获取详细规格。

📋

质量文档

SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。

📚

文献证明

在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。

概述

  固定的目的在于保存细胞和组织的原有形态结构,固定剂能阻止内源性溶酶体酶对自身组织和细胞的自溶、抑制细菌和霉菌的生长。固定剂通过凝固、生成添加化合物等使蛋白质内部结构发生改变,从而使酶失活。固定液主要分为醛类固定液、汞类固定液、醇类固定液、氧化剂类固定液、苦味酸盐类固定液等,较常用的是醛类中的福尔马林、醇类中的乙醇。

  FPA 固定液 (FPA Fluid) 主要由福尔马林、乙醇、乙酸混合而成,用于固定一般的植物材料,24h 固定后效果比 FAA 固定液更好,并可长期保存材料。

操作步骤(仅供参考):

1、一般需固定 24h。

2、固定后可长期保存。

注意事项:

1、FPA固定液对人体有一定的损害,请在通风好的环境下小心操作,避免吸入。

2、组织取材的厚度不同,固定时间也不同,对组织恰当的选材有利于固定液的渗透。常规活检组织比较适合的厚度为 2~4mm,一般不超过 6mm。

3、固定液的容量应足够,一般固定液与组织块的体积比率应大于 10:1。如果容积不够大,可以在固定期间更换 1~3 次固定液。

4、温度对固定的影响很明显,提高温度可以加速固定作用,但温度不宜过高。

5、取出新鲜组织后,应及时固定,无法及时固定时,应保存于生理盐水中及时送检。

6、为了您的安全和健康,请穿实验服并戴一次性手套操作。

7、本产品仅用于科研,严禁他用。

  The purpose of fixation is to preserve the original morphology and structure of cells and tissues. Fixatives prevent autolysis of tissues and cells by endogenous lysosomal enzymes and inhibit the growth of bacteria and molds. Fixatives alter the internal structure of proteins through coagulation, formation of additive compounds, and other mechanisms, thereby inactivating enzymes. Fixative solutions are mainly classified into aldehyde fixatives, mercuric fixatives, alcoholic fixatives, oxidizing fixatives, picrate fixatives, etc. Among the commonly used ones are formalin from aldehydes and ethanol from alcohols.

  FPA Fixative Solution (FPA Fluid) is mainly composed of formalin, ethanol and acetic acid. It is used for fixing general plant specimens. Fixation for 24 hours yields better results than FAA fixative and allows long‑term preservation of specimens.

Procedure (For Reference Only):

1. Fixation generally requires 24 hours.

2. Specimens can be stored long‑term after fixation.

Precautions:

1. FPA fixative is harmful to the human body. Please handle with care in a well‑ventilated environment and avoid inhalation.

2. Fixation time varies with the thickness of tissue samples. Proper tissue preparation facilitates penetration of the fixative. The suitable thickness for routine biopsy tissues is 2–4 mm, generally not exceeding 6 mm.

3. The volume of fixative should be sufficient; the volume ratio of fixative to tissue block should generally be greater than 10:1. If the volume is inadequate, the fixative may be replaced 1–3 times during fixation.

4. Temperature significantly affects fixation. Increasing temperature accelerates fixation, but the temperature should not be excessively high.

5. Fresh tissues should be fixed promptly after collection. If immediate fixation is not possible, tissues should be stored in physiological saline and submitted for testing without delay.

6. For your safety and health, please wear a lab coat and disposable gloves during operation.

7. This product is for research use only and strictly prohibited for other purposes.

规格

别名
乙醇-丙酸-甲醛固定液
英文别名
FPA Fixative | FPA Fluid
规格或纯度
BioReagent,用于显微镜
稳定性与储存
Store at room temperature long term (12 months).
英文名称
FPA Fixative Solution
储存条件
室温
运输条件
常规运输
名称和识别符
分子类型
生物试剂/缓冲液

技术文档

📋 安全数据表 (SDS)

全面的危险、操作、储存及法规合规文件。

下载 SDS →

✅ 分析证书 (COA)

批次质量数据。输入批号以获取对应 COA。

查询 COA →

📊 产品数据表

产品规格和应用的快速参考摘要。

查看数据表 →

🔬 规格说明书

该级别的完整质量属性和验收标准。

查看规格说明 →

高级数据

质检证书(CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱:

通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!

找到1个结果

批号(Lot Number) 证书类型 货号
ZJ26F0434335 分析证书 F1520383
技术文档和文章
组织和细胞样品固定中戊二醛、多聚甲醛与福尔马林的应用区别
Application Differences Among Glutaraldehyde, Paraformaldehyde, and Formalin in Tissue and Cell Sample Fixation
常用固定液怎么选?组织病理、免疫染色、细胞学与电镜样本的固定策略比较
How to Choose Common Fixatives? A Comparison of Fixation Strategies for Histopathology, Immunostaining, Cytology, and Electron Microscopy Samples
线虫与虫卵形态学观察方法
Morphological Observation Methods for Nematodes and Eggs
溶液计算器

常见问题

什么是「用于显微镜」?
「用于显微镜」表示该物料经过加工和检测,适用于特种工业加工。规格侧重于影响该应用性能的杂质——例如,电子应用的金属含量、电池应用的粒度、光学应用的折射率,或对水分敏感工艺的水分含量。
什么是「BioReagent」?
「BioReagent」表示该产品经过加工和检测,适用于生物和生化应用。规格可能包括内毒素限值、微生物控制、无菌性、低 DNase/RNase/蛋白酶活性,以及在相关情况下的生物活性验证。
本产品应如何储存?
请于室温条件下保存。
本产品如何运输?
本产品按常温标准条件运输,无需温控包装。
如何获取批次专用COA?
每个订单都会随附分析证书(COA),您也可以从账户订单历史中下载。如需订购前的COA,请联系您的客户代表,或使用PDP上的"申请COA"按钮——我们将提供代表性批次的COA。