计算溶液所需的质量、体积或浓度。
BioReagent,分子生物学级,无RNA酶,用于核酸电泳 级 ,适用于对基线干扰要求严格的色谱和分析工作流程。
室温。常规运输 。请查阅批次 COA 获取详细规格。
SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。
在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。
Tris - 乙酸电泳缓冲液(Tris Acetate-EDTA Buffer,简称 TAE)是常用的核酸电泳缓冲液,1×TAE 工作液组成为:40 mM Tris-acetate、1 mM EDTA(pH 8.0)。
TAE缓冲液 (50×, RNase Free) 为50 倍浓缩液,采用 0.1% DEPC 处理水配制,主要含 2 M Tris-acetate、50 mM EDTA 等成分,专为 RNA 电泳设计,使用时需用 DEPC 处理水稀释 50 倍至 1×。
本试剂仅用于科研领域,不适用于临床诊断或其他用途。
操作步骤(仅供参考)
使用前用 DEPC 处理水稀释至 1× 工作液。
注意事项
若单次使用量较小,建议试剂分装后使用。
实验操作全程需严格避免 RNase 污染。
操作时请穿戴实验服及一次性手套。
试剂开封后请尽快使用并密封保存,以免影响实验效果。
Tris-Acetate-EDTA Buffer (TAE) is a commonly used nucleic acid electrophoresis buffer. The composition of 1× TAE working solution is: 40 mM Tris-acetate, 1 mM EDTA (pH 8.0).
TAE Buffer (50×, RNase Free) is a 50-fold concentrated solution prepared with 0.1% DEPC-treated water. It primarily contains 2 M Tris-acetate, 50 mM EDTA, and other components. It is specifically designed for RNA electrophoresis. Before use, dilute 50-fold with DEPC-treated water to obtain a 1× working solution.
This reagent is for research use only. Not for use in diagnostic procedures or other purposes.
Procedure (For Reference Only)
Dilute the product to a 1× working solution with DEPC-treated water before use.
Notes
If the single-use volume is small, it is recommended to aliquot the reagent before use.
Strictly avoid RNase contamination throughout the entire experimental procedure.
Please wear laboratory appropriate attire and disposable gloves during operation.
Use the reagent as soon as possible after opening and keep it sealed to avoid affecting experimental results.
通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!
| 批号(Lot Number) | 证书类型 | 货号 |
|---|---|---|
| 分析证书 | T1518779 |
我们的级别选择指南涵盖了目录中所有的变体的纯度、稳定剂状态和应用适用性。
查看 BioReagent 级别指南 → 查看 Suitable for molecular biology 级别指南 → 查看 RNase free 级别指南 → 查看 for NA electrophoresis 级别指南 →