甲醇中氯苯溶液标准物质

CAS: 108-90-7 货号: BWY272988 分子式: C6H5Cl 分子量: 112.56 Beilstein号: 605632 EC号: 203-628-5
有货
级别和纯度: 1000μg/mL in Methanol
别名
一氯化苯,氯化苯
储存条件
2-8°C储存,避光
运输条件
低温运输,DG运输
★
规格
库存
价格
数量
1.2ml
BWY272988-1.2ml
现货 Stock Image
¥135.90
请输入您要添加的产品数量
🧪
为什么选择此级别

,适用于对基线干扰要求严格的色谱和分析工作流程。

🌡

储存与运输

2-8°C储存,避光。低温运输,DG运输 。请查阅批次 COA 获取详细规格。

📋

质量文档

SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。

📚

文献证明

在色谱分析、有机合成和交叉偶联反应领域已被 624 篇同行评审文献引用。

概述

本标准物质主要用于测量仪器校准、分析方法评价和质量控制,以及食品、卫生、环境和农业等领域相应成分含量测定与残留检测,也可用于量值溯源或作为标准储备溶液,通过逐级稀释配制成各种工作用标准溶液等。

 

样品制备

 

本标准物质采用纯度准确定值的氯苯纯品为原料,以色谱纯甲醇为溶剂,采用重量-容量法准确配制而成。

氯苯(别名:氯代苯),英文名称:Chlorobenzene ,CAS:108-90-7

 

溯源性及定值方法

 

本标准物质以配制值作为标准值,采用GC-MS对本批次标准物质和质量控制对照样品进行比对,核验配制值。通过使用满足计量学特性要求的制备方法、测量方法和计量器具,保证标准物质的量值溯源性。

 

特性量值及不确定度

 

编号

名称

标准值(μg/mL)

相对扩展不确定度(%)(k=2)

BWY272988

甲醇中氯苯

1000

3

 

标准值的不确定度主要由原料纯度、称量、定容以及均匀性、稳定性等不确定度分量合成。

 

均匀性检验及稳定性考察

 

依据JJF1343-2012《标准物质定值的通用原则及统计学原理》,对分装后的样品进行随机抽样,对溶液浓度进行均匀性检验、稳定性考察。结果表明,本标准物质均匀性、稳定性良好。

本标准物质量值自定值日期起,有效期为24个月, 研制单位将继续跟踪监测该标准物质的稳定性,有效期内如发现量值变化,将及时通知用户。

 

包装、运输和贮存、使用及注意事项

 

1.包装:本标准物质采用硼硅酸盐玻璃安瓿瓶包装,约1.2mL/支,移取或稀释时请以移液管量取为准。

2.运输和贮存:冰袋运输,运输时应避免挤压、碰撞;冷藏和避光条件下贮存。

3.使用:启封前于室温(20±3℃)平衡,并充分摇匀。安瓿瓶一经打开,应立即使用,不可再次熔封后作为标准物质使用。

This standard substance is mainly used for measuring instrument calibration, analysis method evaluation and quality control, as well as the content determination and residue detection of corresponding components in the fields of food, hygiene, environment and agriculture. It can also be used for value traceability or as a standard stock solution. Dilute and prepare various standard solutions for work.

 

Sample Preparation

 

This standard substance is made of pure chlorobenzene with accurate purity as the raw material, chromatographic pure methanol as the solvent, and accurately prepared by the weight-volume method.

Chlorobenzene (alias: chlorobenzene), English name: Chlorobenzene, CAS: 108-90-7

 

Traceability and valuation method

 

This standard material takes the prepared value as the standard value, and uses GC-MS to compare the batch of standard materials with the quality control control sample to verify the prepared value. Through the use of preparation methods, measurement methods and measuring instruments that meet the requirements of metrological characteristics, the traceability of the value of the reference material is guaranteed.

 

Characteristic value and uncertainty

 

Number

Name

Standard value(μg/mL)

Relative expanded uncertainty(%)(k=2)

BWY272988

Chlorobenzene in Methanol

1000

3

 

The uncertainty of the standard value is mainly composed of raw material purity, weighing, constant volume, uniformity, stability and other uncertainty components.

 

Uniformity inspection and stability inspection

According to JJF1343-2012 "General Principles and Statistical Principles for Determining the Value of Standard Materials", random samples were taken of the subpackaged samples, and the uniformity and stability of the solution concentration were inspected. The results show that the standard material has good uniformity and stability.

The quality value of this standard material is valid for 24 months from the date of setting the value. The development unit will continue to track and monitor the stability of the standard material. If there is any change in the value during the valid period, the user will be notified in time.

 

Packaging, transportation and storage, use and precautions

 

1. Packaging: This standard material is packaged in a borosilicate glass ampoule, about 1.2mL/piece. When pipetting or diluting, please refer to the pipette volume.

2. Transportation and storage: transport in ice bags, avoid squeezing and collision during transportation; store under refrigerated and dark conditions.

3. Use: Equilibrate at room temperature (20±3℃) before unsealing, and shake well. Once the ampoule is opened, it should be used immediately. It cannot be used as a standard substance after being sealed again.

规格

别名
一氯化苯,氯化苯
规格或纯度
1000μg/mL in Methanol
英文名称
Chlorobenzene in Methanol
储存条件
2-8°C储存,避光
运输条件
低温运输,DG运输
名称和识别符
EC号
203-628-5
分子类型
小分子
INCHI
1S/C6H5Cl/c7-6-4-2-1-3-5-6/h1-5H
InChi Key
MVPPADPHJFYWMZ-UHFFFAOYSA-N
Isomeric SMILES
C1=CC=C(C=C1)Cl
UN Number
Packing Group
III
分子量
112.56
Beilstein号
605632
Reaxy-Rn
605632
Reaxys-RN link address
https://www.reaxys.com/reaxys/secured/hopinto.do?context=S&query=IDE.XRN=605632&ln=

技术文档

📋 安全数据表 (SDS)

全面的危险、操作、储存及法规合规文件。

下载 SDS →

✅ 分析证书 (COA)

批次质量数据。输入批号以获取对应 COA。

查询 COA →

📊 产品数据表

产品规格和应用的快速参考摘要。

查看数据表 →

🔬 规格说明书

该级别的完整质量属性和验收标准。

查看规格说明 →

高级数据

系统学分类

分类树(Taxonomy Tree)

界(kingdom) 有机化合物
超类(Superclass) 苯类化合物
类(Class) 苯及其取代衍生物
亚类(Subclass) 卤代苯
中间层级节点(Intermediate Tree Nodes) 暂无
直接上位类(Direct Parent) 氯苯类
其他上位类(Alternative Parents) 芳基氯化物  有机氯化物  碳氢化合物衍生物  
分子骨架(Molecular Framework) 芳香族同单环化合物
取代基(Substituents) 芳香族同单环化合物 - 芳基氯化物 - 芳基卤化物 - 氯苯 - 烃衍生物 - 有机氯化物 - 有机卤化物
描述(Description) 该化合物属于有机化合物中的氯苯类。这类化合物在苯环上连接一个或多个氯原子。
外部描述符(External Descriptors) an aromatic compound
化学和物理性质
折光率
1.5248
闪点(℉)
82°F
闪点(℃)
28℃
沸点
131-132°C
熔点
-45°C
安全和危险性(GHS)
一般危化品
一般危化品
象形图
GHS02,   GHS06,   GHS07,   GHS08,   GHS09
信号词
危险
危险声明

H225: 高度易燃的液体和蒸气

H370: 对器官造成损害

H301+H311+H331: 吞咽、皮肤接触或吸入中毒。

预防措施声明

P210: 远离热源,热表面,火花,明火和其他点火源。 - 禁止抽烟。

P233: 保持容器密闭。

P240: 地面/粘结容器和接收设备

P241: 使用防爆的[电气/通风/照明/.../]设备。

P242: 仅使用无火花的工具。

P243: 采取防静电措施

P260: 不要吸入灰尘/烟雾/气体/雾/蒸汽/喷雾。

P264: 处理后要彻底洗手。

P270: 使用本产品时,请勿进食、饮水或吸烟。

P271: 仅在室外或通风良好的地方使用。

P280: 戴防护手套/穿防护服/戴防护眼罩/戴防护面具。

P330: 漱口

P301+P310: 如误吞咽:立即呼叫急救中心/医生。

P303+P361+P353: 如皮肤(或头发)沾染:立即脱掉所有沾染的衣服。用水清洗皮肤/淋浴。

P304+P340: 如误吸入:将人转移到空气新鲜处,保持呼吸舒适体位。

P308+P311: 如接触到或有疑虑:呼叫急救中心/医生。

P370+P378: 火灾时:使用干砂、干粉或抗醇泡沫灭火。

P405: 密闭存放

P403+P233: 存放在通风良好的地方。保持容器密闭。

P403+P235: 存放在通风良好的地方。保持低温。

P501: 将内容物/容器处理到。。。

WGK Germany
1
Class
3
个人防护装备
Eyeshields,Faceshields,full-face respirator (US),Gloves,multi-purpose combination respirator cartridge (US)
质检证书(CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱:

通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!

找到1个结果

批号(Lot Number) 证书类型 货号
C2123240 分析证书 BWY272988
技术文档和文章
发光聚合物(LEPs)实用全景:PL/EL 核心机制框架、材料家族地图与结构旋钮(含产品表1–4及选型导航)
Light-Emitting Polymers (LEPs): A Practical Panorama - A Core PL/EL Mechanistic Framework, Material Family Map, and Structural “Design Knobs” (including Product Tables 1–4 and a selection guide)
把“芳基氯 + 低Pd + 放大复现”做稳:Pd–NHC(钯-N-杂环卡宾)交叉偶联的启动与耐久逻辑(含选型导航与产品表)
Make “Aryl Chlorides + Low Pd Loading + Scale-Up Reproducibility” Reliable: The Initiation and Durability Logic of Pd–NHC (Palladium–N-Heterocyclic Carbene) Cross-Coupling (with Selection Navigation and Product Tables)
Suzuki–Miyaura 反应怎么做稳:定位瓶颈,锁定可复现窗口(含选型导航及产品表1–表5)
How to Make the Suzuki–Miyaura Reaction Robust: Pinpoint the Bottleneck and Lock in a Reproducible Operating Window (with Selection Navigation and Product Tables 1–5)
交叉偶联反应的实验判断方法:目标键型、底物组合与催化体系选择
Experimental Decision-Making for Cross-Coupling Reactions: Target Bond Type, Substrate Combination, and Catalytic System Selection
金属卤化物钙钛矿太阳能电池:高效率来源、稳定性瓶颈与实验判断逻辑
Metal Halide Perovskite Solar Cells: Sources of High Efficiency, Stability Bottlenecks, and Experimental Decision Logic
从 ICMA 到 ICBA/ICTA:茚-C60 加成物受体的结构调控与器件性能
From ICMA to ICBA/ICTA: Structural Modulation and Device Performance of Indene-C60 Adduct Acceptors
从分子设计到形貌控制:小分子给体如何提升有机太阳能电池的效率、稳定性与可加工性
From Molecular Design to Morphology Control: How Small-Molecule Donors Improve the Efficiency, Stability, and Processability of Organic Solar Cells
半导体型单壁碳纳米管晶体管关态电流偏高的原因、诊断与调控策略
Causes, Diagnosis, and Control Strategies for Elevated Off-State Current in Semiconducting Single-Walled Carbon Nanotube Transistors
哌啶α位C–H键的一锅芳基化:从定向锂化、Li→Zn转金属化到Negishi偶联
One-Pot Arylation of the Piperidine α-C–H Bond: From Directed Lithiation and Li→Zn Transmetalation to Negishi Coupling
此产品的引用文献
溶液计算器

常见问题

本产品应如何储存?
请于2–8 °C、避光条件下保存。本品对光敏感,请保存在原始的避光或棕色容器中。
本产品如何运输?
本产品采用湿冰冷藏运输。收货后请立即拆包,并按上述储存条件保存。
本产品的 CAS 号、分子式和分子量是多少?
本产品的 CAS 号为 108-90-7,分子式为 C6H5Cl,分子量为 112.56 g/mol。InChIKey MVPPADPHJFYWMZ-UHFFFAOYSA-N。
如何获取批次专用COA?
每个订单都会随附分析证书(COA),您也可以从账户订单历史中下载。如需订购前的COA,请联系您的客户代表,或使用PDP上的"申请COA"按钮——我们将提供代表性批次的COA。