计算溶液所需的质量、体积或浓度。
切片被夹于载玻片和盖玻片之间,其间用封固剂加以封闭,借以隔断切片与外界空气接触,这一操作过程称为封固,一方面可保存已染好的片子,另一方面可利用折射率适宜的封固剂使材料中的组织细胞清楚显示出来。
Fischor封片剂主要由甘油、明胶、少量苯酚等组成,可以用于常规的各种切片、涂片等的封片。该试剂仅用于科研领域,不宜用于临床诊断或其他用途。
自备材料:
组织样本、载玻片、盖玻片、显微镜
操作步骤(仅供参考):
1、细胞样本
①染色结束后,吸干净液体。
②滴加1-2滴Fischor封片剂载玻片上,盖上贴有细胞的盖玻片,让细胞接触Fischor封片剂,尽量避免产生气泡。
③显微镜下观察。
2、组织切片
①染色完成后,吸去染色液。
②滴1-2滴Fischor封片剂于组织切片上,盖上盖玻片,让切片接触封片剂,尽量避免产生气泡。
③在显微镜下观察组织切片。
3、其它样品
其它样品参考细胞样本或组织切片进行操作。
注意事项:
1、封片样品宜避光保存。
2、封片剂在温度较低时呈固态,使用前须在37-50℃温浴,并在完全溶解后使用。
3、为了您的安全和健康,请穿实验服并戴一次性手套操作。
4、试剂开封后请尽快使用,以防影响后续实验效果。
Product Introduction
A section is sandwiched between a slide and a coverslip, with a mounting medium applied in between to seal it off from contact with the outside air. This process is called mounting. On the one hand, it preserves the stained slides; on the other hand, the mounting medium with a suitable refractive index allows the tissue cells in the sample to be clearly visualized.
Fischor Mounting Medium is mainly composed of glycerol, gelatin, and a small amount of phenol. It can be used for mounting various routine sections and smears. This reagent is intended for research purposes only and not for clinical diagnosis or other applications.
Materials to Be Prepared by Users
Tissue samples, slides, coverslips, microscope
Operating Procedures (For Reference Only)
1. Cell Samples
① After staining, aspirate all liquid completely.
② Add 1-2 drops of Fischor Mounting Medium onto the slide, then place the coverslip with adherent cells onto the medium, ensuring the cells come into contact with the mounting medium and minimizing bubble formation.
③ Observe under a microscope.
2. Tissue Sections
① After staining, aspirate the staining solution.
② Add 1-2 drops of Fischor Mounting Medium onto the tissue section, then place a coverslip over it, ensuring the section is in contact with the mounting medium and minimizing bubble formation.
③ Observe the tissue section under a microscope.
3. Other Samples
Follow the procedures for cell samples or tissue sections.
Precautions
1. Mounted samples should be stored away from light.
2. The mounting medium appears solid at low temperatures. Before use, incubate it in a water bath at 37-50 °C until it is completely dissolved.
3. For your safety and health, wear a lab coat and disposable gloves during operation.
4. Please use the reagent as soon as possible after opening to avoid affecting subsequent experimental results.
通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!
| 批号(Lot Number) | 证书类型 | 货号 |
|---|---|---|
| 分析证书 | F1508973 |
我们的级别选择指南涵盖了目录中所有的变体的纯度、稳定剂状态和应用适用性。
查看 Suitable for Immunofluorescence(IF) 级别指南 → 查看 BioReagent 级别指南 → 查看 for Microscopy 级别指南 → 查看 Suitable for Immunohistochemistry(IHC) 级别指南 →