聚(3,4-乙烯二氧噻吩)-聚(苯乙烯磺酸盐)(PEDOT:PSS)

CAS: 155090-83-8 货号: P475428 EC号: 629-200-1
有货
级别和纯度: 1%-1.3% in water,导电率≥850S/cm
别名
聚(2,3-二氢噻吩并-1,4-二恶英)-聚(苯乙烯磺酸盐) | 聚乙撑二氧噻吩-聚 苯乙烯磺酸盐
储存条件
2-8°C储存
运输条件
低温运输
★
规格
库存
价格
数量
1g
P475428-1g
现货 Stock Image
¥99.90
5g
P475428-5g
现货 Stock Image
¥338.90
25g
P475428-25g
现货 Stock Image
¥1,189.90
100g
P475428-100g
现货 Stock Image
¥3,399.90
请输入您要添加的产品数量
🧪
为什么选择此级别

,适用于对基线干扰要求严格的色谱和分析工作流程。

🌡

储存与运输

2-8°C储存。低温运输 。请查阅批次 COA 获取详细规格。

📋

质量文档

SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。

📚

文献证明

在色谱分析、有机合成和交叉偶联反应领域已被 92 篇同行评审文献引用。

概述

PEDOT:PSS(或聚(3,4-乙烯二氧噻吩)聚苯乙烯磺酸盐)是一种透明导电聚合物,由离聚物聚(3,4-乙烯二氧噻吩)和聚苯乙烯磺酸盐的混合物组成。由于其导电性、透明度、延展性和易加工性的独特组合,PEDOT:PSS 已成为薄膜电子制造的基准材料。可用作有机发光二极管、有机光伏和钙钛矿光伏中空穴传输的界面层。它也可以用作透明导体(如ITO或FTO)的替代品,通常用于底层基板柔性的应用。
PH 1000 PEDOT:PSS 专为需要高导电性和光学透明度的应用而设计。高导电性PEDOT:PSS配方的潜在用途包括替代ITO的薄膜电子中的半透明顶部电极,FET中的顶部栅极,以及用作粗糙表面上的厚平坦化层,例如FTO。通过添加二甲基亚砜和乙二醇等导电增强剂,可以实现低至 300 Ω/平方的薄层电阻。

沸点:100℃


应用:

PH 1000 PEDOT:PSS 主要用于口服脊髓灰质炎、有机发光二极管、佩罗斯凯特太阳能电池;

​Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is an organic semiconductor prepared by doping cationic poly(3,4-ethylenedioxythiophene) and poly(4-styrenesulfonate) anion. Its high electrical conductivity and good oxidation resistance make it suitable for electromagnetic shielding and noise suppression. PEDOT:PSS based polymeric films have a high transparency throughout the visible light spectrum and even in near IR and near UV regions, with virtually 100% absorption from 900-2000 nm. PEDOT provides the conduction properties and PSS forms a hydrated colloidal solution.Ready-to-use high conductivity coating formulation.PEDOT:PSS is an intrinsically conductive polymer (ICP) that can be coated on various substrates and nanostructures like fullerenes (C60) to form composites with high electrochemical properties for applications like low-cost printed electronics, optoelectronics, and polymeric solar cells. It can be used as a conductive hydrogel with polyethylene glycol-diacrylate (PEG-DA) for potential applications in tissue engineering. PEDOT:PSS also finds use in other organic electronic applications like organic thin film transistors (OTFTs) and dye sensitized solar cells (DSSCs).Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.

PH 1000 PEDOT:PSS is designed for applications where high conductivity and optical transparency are required. The potential uses for high conductivity PEDOT:PSS formulations include replacements for ITO, semitransparent top electrodes in thin film electronics, top gate electrodes in FETs, and for use as a thick planarisation layer on rough surfaces such as FTO. Sheet resistances as low as 300 Ω/square can be achieved with the addition of conductivity enhancement agents such as dimethylsulfoxide and ethylene glycol.


Application:

PH 1000 PEDOT Main Application:OPV, OLED, Peroskite Solar Cells.


规格

别名
聚(2,3-二氢噻吩并-1,4-二恶英)-聚(苯乙烯磺酸盐) | 聚乙撑二氧噻吩-聚 苯乙烯磺酸盐
英文别名
POLY(3,4-ETHYLENEDIOXYTHIOPHENE)-POLY(STYRENESULFONATE),1.3-1.7% IN WATER | A883673 | E82258 | CleviosTM P VP AI 4083
规格或纯度
1%-1.3% in water,导电率≥850S/cm
英文名称
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)(PEDOT:PSS)
储存条件
2-8°C储存
运输条件
低温运输
名称和识别符
PubChem SID
EC号
629-200-1
分子类型
聚合物
IUPAC Name
2,3-dihydrothieno[3,4-b][1,4]dioxine;(E)-2-phenylethenesulfonic acid
INCHI
1S/C8H8O3S.C6H6O2S/c9-12(10,11)7-6-8-4-2-1-3-5-8;1-2-8-6-4-9-3-5(6)7-1/h1-7H,(H,9,10,11);3-4H,1-2H2/b7-6+;
InChi Key
BGAWZPQKJPTIEA-UHDJGPCESA-N
Smiles
C1COC2=CSC=C2O1.C1=CC=C(C=C1)C=CS(=O)(=O)O
Isomeric SMILES
C1COC2=CSC=C2O1.C1=CC=C(C=C1)/C=C/S(=O)(=O)O

技术文档

📋 安全数据表 (SDS)

全面的危险、操作、储存及法规合规文件。

下载 SDS →

✅ 分析证书 (COA)

批次质量数据。输入批号以获取对应 COA。

查询 COA →

📊 产品数据表

产品规格和应用的快速参考摘要。

查看数据表 →

🔬 规格说明书

该级别的完整质量属性和验收标准。

查看规格说明 →

高级数据

三维结构
交互式化学结构模型





产品属性
pH 1.5 - 2.5 ( 25℃)
化学和物理性质
密度
1.011g/cm³(dried coatings)
敏感性
对热敏感
折光率
n20/D 1.334
安全和危险性(GHS)
象形图
信号词
危险
危险声明

H314: 造成严重的皮肤灼伤和眼睛损伤

H318: 造成严重的眼睛损伤

预防措施声明

P260: 不要吸入灰尘/烟雾/气体/雾/蒸汽/喷雾。

P264: 处理后要彻底洗手。

P280: 戴防护手套/穿防护服/戴防护眼罩/戴防护面具。

P321: 特殊处理(请参阅此标签上的...)。

P363: 再次使用之前,请清洗受污染的衣物。

P301+P330+P331: 如误吞咽:漱口。不要诱导呕吐。

P304+P340: 如误吸入:将人转移到空气新鲜处,保持呼吸舒适体位。

P405: 密闭存放

P501: 将内容物/容器处理到。。。

P264+P265: 处理后彻底洗手[和…]。不要触摸眼睛。

P305+P354+P338: 如果进入眼睛:立即用水冲洗几分钟。取下隐形眼镜(如果有的话),并且操作简单。继续冲洗。

P317: 寻求紧急医疗救助。

P302+P361+P354: 如果接触皮肤:立即脱掉所有被污染的衣服。立即用水冲洗几分钟。

P316: 立即寻求紧急医疗救助。

质检证书(CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱:

通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!

找到38个结果

批号(Lot Number) 证书类型 货号
A2405396 分析证书 P475428
A2405398 分析证书 P475428
F2622529 分析证书 P475428
F2622513 分析证书 P475428
F2622511 分析证书 P475428
F2622512 分析证书 P475428
F2317439 分析证书 P475428
F2317441 分析证书 P475428
F2317444 分析证书 P475428
A2615497 分析证书 P475428
A2615474 分析证书 P475428
A2615473 分析证书 P475428
A2615460 分析证书 P475428
E2606015 分析证书 P475428
C2513631 分析证书 P475428
C2513644 分析证书 P475428
C2513645 分析证书 P475428
A2612091 分析证书 P475428
L2402556 分析证书 P475428
L2402548 分析证书 P475428
L2402555 分析证书 P475428
J2410658 分析证书 P475428
J2410657 分析证书 P475428
J2410656 分析证书 P475428
F2418146 分析证书 P475428
F2418147 分析证书 P475428
F2418148 分析证书 P475428
C2414709 分析证书 P475428
C2414708 分析证书 P475428
C2414707 分析证书 P475428
A2405395 分析证书 P475428
A2405397 分析证书 P475428
A2405394 分析证书 P475428
J2326481 分析证书 P475428
J2326480 分析证书 P475428
F2317442 分析证书 P475428
F2317440 分析证书 P475428
F2317434 分析证书 P475428
技术文档和文章
发光聚合物
用于有机电子应用的无机界面层油墨
Inorganic Interface Layer Inks for Organic Electronic Applications
材料也会“开关”:智能聚合物如何响应温度、pH 与光(附实验选型与产品导航)
Materials Can “Switch”: How Smart Polymers Respond to Temperature, pH, and Light (with Experimental Selection Tips & Product Navigation)
发光聚合物(LEPs)实用全景:PL/EL 核心机制框架、材料家族地图与结构旋钮(含产品表1–4及选型导航)
Light-Emitting Polymers (LEPs): A Practical Panorama - A Core PL/EL Mechanistic Framework, Material Family Map, and Structural “Design Knobs” (including Product Tables 1–4 and a selection guide)
光学与光电材料选型导览:按“产生—引导—调控—读出”定位材料、关键指标与验证路径(含产品导航与表1–表4)
Optical & Optoelectronic Materials Selection Guide:Positioning materials, key metrics, and validation paths along “Generation → Guiding → Control → Readout” (with product navigation and Tables 1–4)
噻吩(Thiophene)是什么:结构特色、应用价值与科研选型思路
What Is Thiophene? Structural Features, Application Value, and Research-Oriented Selection Strategies
金属卤化物钙钛矿太阳能电池:高效率来源、稳定性瓶颈与实验判断逻辑
Metal Halide Perovskite Solar Cells: Sources of High Efficiency, Stability Bottlenecks, and Experimental Decision Logic
从 ICMA 到 ICBA/ICTA:茚-C60 加成物受体的结构调控与器件性能
From ICMA to ICBA/ICTA: Structural Modulation and Device Performance of Indene-C60 Adduct Acceptors
从分子设计到形貌控制:小分子给体如何提升有机太阳能电池的效率、稳定性与可加工性
From Molecular Design to Morphology Control: How Small-Molecule Donors Improve the Efficiency, Stability, and Processability of Organic Solar Cells
ZnO 纳米颗粒电子传输层如何降低有机光电探测器暗电流:作用机制、成膜质量与材料选择
How ZnO Nanoparticle Electron Transport Layers Reduce Dark Current in Organic Photodetectors: Mechanisms, Film Quality, and Material Selection
导电炭黑在涂料中的应用:选型依据、分散控制与导电网络构建
Application of Conductive Carbon Black in Coatings: Selection Criteria, Dispersion Control, and Conductive Network Construction
Light-emitting Polymers
此产品的引用文献
溶液计算器