血小板稀释液 (计数液)

货号: P1511110
有货
级别和纯度: BioReagent ? 生物试剂级(BioReagent)—— 经测试适用于生命科学和分子生物学。适用于需要生物相容性的细胞培养、检测和生化工作。 生物染色剂 ? 生物染色剂级 —— 经表征用于细胞和组织染色的染料。适用于注重染色一致性的组织学和显微镜检查。 用于显微镜 ? 显微镜级 —— 适用于样品制备和成像的试剂/染料。适用于需要清晰度和低背景的显微镜检查。
别名
血小板计数液
储存条件
室温
运输条件
常规运输
应用
细胞分析
★
规格
库存
价格
数量
100ml
P1511110-100ml
现货 Stock Image
¥59.90
500ml
P1511110-500ml
现货 Stock Image
¥169.90
请输入您要添加的产品数量
🧪
为什么选择此级别

BioReagent,生物染色剂,用于显微镜 级 ,适用于对基线干扰要求严格的色谱和分析工作流程。

🌡

储存与运输

室温。常规运输 。请查阅批次 COA 获取详细规格。

📋

质量文档

SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。

📚

文献证明

在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。

概述

  血小板 (Blood platelet) 是哺乳动物血液中的有形成分之一,是从骨髓成熟的巨核细胞胞质裂解脱落下来的具有生物活性的小块胞质。血小板具有特定的形态结构和生化组成,在止血、伤口愈合、炎症反应、血栓形成及器官移植排斥等生理和病理过程中有重要作用。

  血小板稀释液 (Platelet Dilution) 是一种能破坏血液中的红细胞,但能保护血小板形态完整的稀释液稀释血液,滴入血细胞计数池,在高倍镜下直接计数血小板数。该血小板稀释液仅用于科研领域,不用于临床诊断及其他用途。

操作步骤(仅供参考):

1、 取小号试管,加入Platelet Dilution 0.38ml。

2、 用洁净干燥微量吸管取毛细血管血20μl,擦去管外余血后加至Platelet Dilution中,轻吸上层清液3次,立即充分混匀。

3、 待完全溶血后再次混匀1 min,取混匀的血小板悬液1滴,充入计数池内,注意产生气泡或外溢,室温静置10-15min,待血小板沉淀。

4、 置于显微镜高倍镜下依次计数中央大方格内四角和中央共五个中方格内血小板数。

计算:

  血小板数/L=5个中方格内血小板数×10⁹/L

注意事项:

1、 针刺深度应稍深,拭去第一滴血后,首先采血做血小板计数。操作应迅速,防止血小板聚集。

2、 采血标本后,应在1 h内计数完毕,以免影响结果。

3、 小试管、计数板均应清洁,以免误认细胞。

4、 计数时光线应适中,应注意有折光性的血小板和杂质相区别。

5、 用相位显微镜计数,效果更佳,更准确。

6、 为了您的安全和健康,请穿实验服并戴一次性手套操作。

  Platelets are one of the formed elements in the blood of mammals. They are small, biologically active cytoplasmic fragments shed from the cytoplasm of mature megakaryocytes in the bone marrow through lysis. Platelets possess a specific morphological structure and biochemical composition, and play a crucial role in physiological and pathological processes such as hemostasis, wound healing, inflammatory response, thrombosis, and organ transplant rejection.

  Platelet Diluent is a type of solution that can lyse red blood cells in the blood while preserving the intact morphology of platelets. It is used to dilute blood samples, which are then loaded into a hemocytometer for the direct counting of platelets under a high-power microscope. This platelet diluent is for research use only and not intended for clinical diagnosis or any other applications.

Operating Procedures (For Reference Only):

1. Take a small test tube and add 0.38 mL of platelet diluent to it.

2. Use a clean, dry micropipette to draw 20 μL of capillary blood. Wipe off excess blood from the outside of the pipette, add the blood to the platelet diluent, aspirate the supernatant gently three times, and mix the solution thoroughly immediately.

3. After complete hemolysis, mix the solution again for 1 minute. Take one drop of the well-mixed platelet suspension and load it into the hemocytometer, taking care to avoid bubble formation or overflow. Let it stand at room temperature for 10–15 minutes to allow platelets to settle completely.

4. Place the hemocytometer under the high-power microscope of a light microscope, and count the number of platelets in five medium squares in total—i.e., the four corner medium squares and the central medium square within the large central counting square—one by one.

Calculation:

  Platelet count/L = Number of platelets in 5 medium squares × 10⁹/L

Precautions:

1. The needle puncture should be slightly deep. After wiping off the first drop of blood, collect blood for platelet counting first. Perform all operations rapidly to prevent platelet aggregation.

2. Complete platelet counting within 1 hour after blood collection to avoid interfering with the test results.

3. Ensure the small test tubes and hemocytometers are thoroughly clean to prevent misidentification of foreign particles as platelets.

4. Use moderate light during counting, and take care to distinguish refractive platelets from impurities.

5. Counting with a phase-contrast microscope yields better and more accurate results.

6. For your safety and health, wear a lab coat and disposable gloves during all operations.

规格

别名
血小板计数液
英文别名
Platelet dilution | Platelet counting solution
规格或纯度
BioReagent,生物染色剂,用于显微镜
稳定性与储存
Store at room temperature long term (12 months).
英文名称
Platelet Dilution (Counting Solution)
储存条件
室温
运输条件
常规运输
产品线
生物产品
名称和识别符
分子类型
生物试剂/缓冲液

技术文档

📋 安全数据表 (SDS)

全面的危险、操作、储存及法规合规文件。

下载 SDS →

✅ 分析证书 (COA)

批次质量数据。输入批号以获取对应 COA。

查询 COA →

📊 产品数据表

产品规格和应用的快速参考摘要。

查看数据表 →

🔬 规格说明书

该级别的完整质量属性和验收标准。

查看规格说明 →

高级数据

质检证书(CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱:

通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!

找到2个结果

批号(Lot Number) 证书类型 货号
ZJ26F0332991 分析证书 P1511110
ZJ26F0332992 分析证书 P1511110
技术文档和文章
溶液计算器

常见问题

什么是「生物染色剂」?
「生物染色剂」表示该产品经过加工和检测,适用于生物和生化应用。规格可能包括内毒素限值、微生物控制、无菌性、低 DNase/RNase/蛋白酶活性,以及在相关情况下的生物活性验证。
本产品应如何储存?
请于室温条件下保存。
本产品如何运输?
本产品按常温标准条件运输,无需温控包装。
什么是「BioReagent」?
「BioReagent」表示该产品经过加工和检测,适用于生物和生化应用。规格可能包括内毒素限值、微生物控制、无菌性、低 DNase/RNase/蛋白酶活性,以及在相关情况下的生物活性验证。
如何获取批次专用COA?
每个订单都会随附分析证书(COA),您也可以从账户订单历史中下载。如需订购前的COA,请联系您的客户代表,或使用PDP上的"申请COA"按钮——我们将提供代表性批次的COA。