偶氮荧光桃红染色液

货号: A1518612
有货
级别和纯度: BioReagent ? 生物试剂级(BioReagent)—— 经测试适用于生命科学和分子生物学。适用于需要生物相容性的细胞培养、检测和生化工作。 生物染色剂 ? 生物染色剂级 —— 经表征用于细胞和组织染色的染料。适用于注重染色一致性的组织学和显微镜检查。 用于显微镜 ? 显微镜级 —— 适用于样品制备和成像的试剂/染料。适用于需要清晰度和低背景的显微镜检查。
别名
偶氮荧光桃红染色剂
储存条件
2-8°C储存,避光
运输条件
低温运输
应用
细胞染色, 结缔组织染色
★
规格
库存
价格
数量
50ml
A1518612-50ml
现货 Stock Image
¥649.90
请输入您要添加的产品数量
🧪

为什么选择此级别

BioReagent,生物染色剂,用于显微镜 级 ,适用于对基线干扰要求严格的色谱和分析工作流程。

🌡

储存与运输

2-8°C储存,避光。低温运输 。请查阅批次 COA 获取详细规格。

📋

质量文档

SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。

📚

文献证明

在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。

概述

  肌纤维(Musclefiber)属于肌组织成分,由肌细胞组成,根据形态和功能特点,肌纤维可以分为平滑肌(又称横纹肌)、骨骼肌、心肌。肌纤维染色的方法有很多种,如丽春红法、苯胺蓝法、钨磷钨酸苏木素法等;鞣酸-偶氮荧光桃红法是利用两种酸性染料先后作用而完成鉴别染色。

  偶氮荧光桃红染色液其染色原理在于鞣酸容易进入渗透性强的胶原纤维,胶原纤维呈黄色;偶氮荧光桃红容易进入渗透性较低的肌纤维,肌纤维呈红色,偶氮荧光桃红染色液用于区分肌纤维和胶原纤维,对比清晰,不宜褪色,同时可以显示肌上皮细胞,可用于乳腺和皮肤等肌上皮细胞瘤的诊断。该试剂仅适用于科研领域,不适用于临床诊断或其他用途。

操作步骤(仅供参考):

1、常规组织固定于Bouin固定液(Carnoy固定液或中性福尔马林亦可)2~3h。

2、直接转入95%的乙醇中,常规脱水包埋。

3、石蜡切片厚4μm,常规甲苯或脱蜡透明液脱蜡至水,流水冲洗1min。

4、磷钼酸分化液处理10min。

5、入偶氮荧光桃红染色液,浸染10~15min。

6、酸性酒精分化液分化3~5s,无水乙醇反复脱水多次。

7、常规脱水,二甲苯或脱蜡透明液透明,中性树胶封固。

染色结果:

肌纤维和肌上皮细胞:玫瑰红色

胶原纤维:黄色

注意事项:

1、尽量采用Bouin固定液固定组织,其他固定液有可能使染色较淡,也可以10%中性福尔马林替代,但效果不如Bouin固定液。

2、酸性酒精分化液较为重要,应至切片上的红色多余染液脱去,肌纤维呈鲜红色为止。

3、为了您的安全和健康,请穿实验服并戴一次性手套操作。

  Muscle fibers are components of muscle tissue and are composed of muscle cells. According to their morphological and functional characteristics, muscle fibers can be classified into smooth muscle, skeletal muscle, and cardiac muscle (note: smooth muscle is not striated muscle; only skeletal and cardiac muscle are striated). There are many staining methods for muscle fibers, such as Ponceau staining, Aniline Blue staining, and Phosphotungstic Acid Hematoxylin staining. The Tannic Acid‑Azophloxine method is a differential staining method using two acidic dyes applied sequentially.

  The staining principle of Azophloxine Staining Solution is that tannic acid readily penetrates highly permeable collagen fibers, which stain yellow; azophloxine preferentially enters less permeable muscle fibers, which stain red. Azophloxine Staining Solution is used to distinguish muscle fibers from collagen fibers with clear contrast and good color fastness. It can also demonstrate myoepithelial cells and is used in the diagnosis of myoepithelial tumors of the breast, skin, and other tissues. This reagent is for research use only and not for clinical diagnosis or other purposes.

Protocol (for reference only):

1. Fix tissues routinely in Bouin’s fixative (Carnoy’s fixative or neutral formalin may also be used) for 2–3 hours.

2. Transfer directly into 95% ethanol for routine dehydration and embedding.

3. Prepare 4‑μm paraffin sections, dewax with xylene or dewaxing clearing agent, and hydrate to water; rinse under running water for 1 minute.

4. Treat with Phosphomolybdic Acid Differentiation Solution for 10 minutes.

5. Stain in Azophloxine Staining Solution for 10–15 minutes.

6. Differentiate in Acid Alcohol Differentiation Solution for 3–5 seconds, then dehydrate repeatedly in absolute ethanol several times.

7. Complete routine dehydration, clear with xylene or dewaxing clearing agent, and mount with neutral balsam.

Staining Results:

Muscle fibers and myoepithelial cells: Rose red

Collagen fibers: Yellow

Precautions:

1. Use Bouin’s fixative whenever possible. Other fixatives may result in weaker staining. 10% neutral formalin may be used as an alternative but yields inferior results compared with Bouin’s fixative.

2. Acid Alcohol Differentiation Solution is critical. Differentiate until excess red dye is removed and muscle fibers appear bright red.

3. For your safety and health, wear a lab coat and disposable gloves during operation.

规格

别名
偶氮荧光桃红染色剂
英文别名
Puchtler Azo Fluorescent Myoglobin Stain
规格或纯度
BioReagent,生物染色剂,用于显微镜
稳定性与储存
Store at 2-8℃ long term (12 months). Store in the dark.
英文名称
Azophloxine Staining Solution
储存条件
2-8°C储存,避光
运输条件
低温运输
名称和识别符
分子类型
生物试剂/缓冲液

技术文档

📋 安全数据表 (SDS)

全面的危险、操作、储存及法规合规文件。

下载 SDS →

✅ 分析证书 (COA)

批次质量数据。输入批号以获取对应 COA。

查询 COA →

📊 产品数据表

产品规格和应用的快速参考摘要。

查看数据表 →

🔬 规格说明书

该级别的完整质量属性和验收标准。

查看规格说明 →

高级数据

化学和物理性质
敏感性
Light-sensitive
质检证书(CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱:

通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!

找到1个结果

批号(Lot Number) 证书类型 货号
ZJ26F0535235 分析证书 A1518612
技术文档和文章
溶液计算器

常见问题

什么是「生物染色剂」?
「生物染色剂」表示该产品经过加工和检测,适用于生物和生化应用。规格可能包括内毒素限值、微生物控制、无菌性、低 DNase/RNase/蛋白酶活性,以及在相关情况下的生物活性验证。
什么是「BioReagent」?
「BioReagent」表示该产品经过加工和检测,适用于生物和生化应用。规格可能包括内毒素限值、微生物控制、无菌性、低 DNase/RNase/蛋白酶活性,以及在相关情况下的生物活性验证。
本产品应如何储存?
请于2–8 °C、避光条件下保存。本品对光敏感,请保存在原始的避光或棕色容器中。
本产品如何运输?
本产品采用湿冰冷藏运输。收货后请立即拆包,并按上述储存条件保存。
如何获取批次专用COA?
每个订单都会随附分析证书(COA),您也可以从账户订单历史中下载。如需订购前的COA,请联系您的客户代表,或使用PDP上的"申请COA"按钮——我们将提供代表性批次的COA。